Report related to goods movement  of  materials?

Standard Report related to goods movement  of  materials?
List of goods received at individual plants
List of goods dispatched to plants
List of goods sold to customer
Please send it .

Dear Goutam
All the three you can see in <b>MB51</b>.
Thanks
G. Lakshmipathi

Similar Messages

  • Restrict all goods movements for materials untill the latest costing run ex

    Hi dudes,
    1 here i have a requirement that i need to restrict all goods movements in the month for all materials(SFG,FG) untill the latest costing run(standard cost estimate) on 1st of each month.
    2. Can we restrict the status of process order in such a way that Conformation can be done only after the goods issues against production order. The goods receipt can be done only after the conformation of the process order.
    Thanks in advance.
    Robert.

    Robert,
    Procedurally you can block, by not opening the current period, before the costing run is completed, just when you wanted to release the cost estimate, at that time you can lock all users and then open the next period and then release your cost estimate and then unlock all the users. You need to work with your Basis/MM/FICO guys to have this procedure implemented.
    On the GI Check before confirmation and Confirmation check before GR, you can use Confirmation and GR releated User exits to check. There are many posts on this topic, a simple search on this forum would take you to the thread.
    Regards,
    Prasobh

  • Allow Goods Movement for materials through specified storage Location

    Dear Experts ,
    In Process order while confirming the goods movement , i want that goods movement shoould be allowed only through the specified storage location that is the production store . Even if the stock is there in the other stores like the general; store , i donot want the goods movement to be done.
    Kindly guide me how can this be done ?
    Anis

    Hello VS ,
    We have maintained the Pord Storage location in both BOM & Material Master.
    Despite this in Good Movement for process order the system doesnt stop from selecting any storage .
    I want that it should not be possible to post an entry from any other store.
    Is there any other way to do it without the user exit ?
    Regards
    Anis

  • SD- Related reverse goods movement

    Hi,
    When we are doing PGI reversal by VL09, stock is coming back to the location from it was dispatched(LM 25). Can we change the storage location so during revrse goods movement by VL09 stock will come to  another storage location(LM23).

    Hi Arun
    It is not possible to change the storage location when you are doing the reverse goods movement in VL09
    --You have done the PGI in Vl01N i.e Goods as already dispatched from this storage location.(LM25) so you cannot change the storage location as ( LM23 ) in VL09
    --Once you the reverse in VL09 the goods goes back to this Storage location where it as been dispatched (LM25).
    --If you want goods to be dispatched from Storage location (LM23) you have to change Storage location Vl02N before doing the PGI.
    --Make sure you need to assign this storage location to your plant & maintain same Material stock in this storage (LM23).
    Let me know if your problem is solved
    Regards
    Pradeep

  • Related to goods movement and IDOC generation

    Hi,
    I need to create an IDOC for custom output type attached to transaction MIGO for purchase order after goods reciept.
    How can I attach an output type with transaction MIGO.
    Or is there is any other method to generate IDOC after good reciept.

    Dear Goutam
    All the three you can see in <b>MB51</b>.
    Thanks
    G. Lakshmipathi

  • Error in Good Movement

    Hi SAP Gurus,
    I have got a error in Goods Movement. For Production Order no.xxxxxxxxx, there is no error in the COGI report, but if we check it in one of the customized report called Valuated Goods movement failure there is a error for the said Order no. But it is not showing any reasons. I checked it in the database table also. There also the error exist, but it is also not giving any reason. Actually what the user did is they did cancel the confirmation for this Order no for certain quantity.
    Can anyone tell me what should be the reason and how to solve it?
    Regards,
    Rinky

    Hi Andreas,
    Thanks for ur reply. actually the user canceled a Confirmation for certain qty. That canceled confirmation is not re-confirmed. when i check in CO14 - Display Production Order Confirmation against the canceled operation/counter no. It says "Highlighted items need to be processed". How to come to the conclusion that what to do next. how to identify the error. In my customization in OPK4 we have maintained,
    Operation sequence   Error when operation sequence is not adhered t
    Underdelivery             Underdelivery tolerance is not checked        
    Overdelivery               Error when overdelivery tolerance is exceeded 
    QM results rec.         Message if no inspection results exist
    So, could you tell me how to solve this?
    Regards,
    Rinky

  • BW Cubes for reporting of Goods Receipts for materials

    Hi,
    I need information regarding cubes, I beleive they will be from MM area, required to be installed to report on Goods receipt for materials and the associated amount Spend that will result from those receipts, including related charges and fees.
    Please share the information.
    Thanks,
    Rajani

    HI,
    If you need to get only goods receipts at MM Side you should be aware of movement types generally 1* in your system to get their values and Quantities.
    If you are going from FI Side you can have FI Document type WE for GR which will help you in getting the spend amount .
    Hope this helps for you.
    Thanks.
    Arun

  • SAP Standard report on Goods Movement

    I am looking for a report that will give me all goods movements documents (eg goods receipt & issue)  that a pecific user did on a specific date.
    Thank you.

    Dear Auchab,
    Check the report MB59 for the movement and user id and date combination.Say for eg you can check for
    601,602,641,642,101,102,131,132,261,262,201 and 202 movement's for a specific date range.
    Or else eneter T Code SAP1--->you can branch to material management or else to production planning to find the various
    reports related to each Module.
    Regards
    Mangalraj.S

  • LAST GOODS MOVEMENT DATE wise report

    Hi MM Experts
    Is there any report through which we can find LAST GOODS MOVEMENT DATE ( goods receipt , issue date ).
    i have tried MC.2 but in this report material , plant and sloc description is coming , i want code so that we can understand easily.
    regards
    anubhav

    Hi,
    To get the plant, material code with description in MC.2 transaction.
    Please following below steps:
    on output screen >>>
    settings >> Characteriastics display >>> select key and description or only Key.
    Regards,
    Shailesh Mackwan

  • Is there any report On Goods Movement Monitoring in Standard SAP ?

    Is there any report On Goods Movement Monitoring in Standard SAP ?
    Please send me.

    Hi,
    You can use MB5B for checking goods movement in a particular plant.
    Regards
    Noopur

  • Need to mark value zero for repairable materials goods movements

    Hello Masters,
    The scenario is like below:
    Materials reach perticular storage locations and goods movement happens with 101K or 102K. For materials of type repairable or non-repairable, we need to make value zero for above movemeny types in process of MIGO.
    I feel that there is a work on config or a work on BADI's.
    Please suggest feasible solutions ASAP as my business needs these to be in place soon.
    Let me know if you need any more inputs.
    Thanks in advance.
    Ravi Shankar

    Hi,
    Check this link:
    [Re: Free goods in Purchase]
    SAM

  • Report Requirement for the Goods Movement

    Dear Gurs,
    I want to see the entire goods movment happend for producing one Finished material.
    Is there any std report that can show the list of good movement (261)
    Eg
    For producing 1 Qty FG I required 50 Kg of SF .
    That SF consits of 2 Raw material RM 1 and RM2  .
    RM1  Required 35 Kg and RM 2 Requires 15 Kg
    During Good Movement (261)of  -  SF
    RM1 - Batch 421 - 12 Kg 
    RM1- Batch 422 - 18 Kg
    RM1 - Batch 433 - 5 Kg
    RM2 Batch 888 - 5 Kg
    RM2 Batch 889 - 10 Kg
    During the Good Movement (261)of  -  FG
    SF Batch 1123 - 50 Kg Issued.
    With reference to the Finish material , I want to seen the goods movement happend for the FG .
    Is there any std report to seen the details at Multilevels
    Srinivasan.

    Hi,
    I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
    or u have to develop customized report.
    Pradeep

  • The CO11N Goods Movement Overview does not display any materials for BOM

    Hello folks;
      I can't seem to get a hit when searching for my particular question, which most likely is an easy one for most of you.
    A new BOM was set up consiting of individual materials (no sub-assemblies). 
    After a production order was created (CO01) and released and a reservation was created, the user went to the CO11N transaction to process the first Operation (Issue the components to the Order).
    He clicks the "Goods Movement" button and the "Enter production order confirmation: goods movement" screen that displays is blank!  There are no components listed with the "261" movement type.
    All the other BOM's that we process do not have this problem and their components appear except for this new BOM that was created.
    What are we missing? 
    I'm sure this is an easy question for you folks since I am mainly an ABAP'er with some Logistics config experience.
    Thanks in advance.
    Scott.

    Thank you so much.  The person who created the Routing did not click on any of the Backflush flags.
    I will have them fix the Routing.
    Thanks again.
    Points awarded.

  • BAPI for searching Goods Movements related to Orders

    Hi,
    I would like to search all Goods Movement related to a certain Order into MM module.
    Does anyone know any RFC or BAPI interface that performs this work?
    Thank you very much in advance.
    Mauro

    Hi!
    Try BAPI_GOODSMVT_GETDETAIL & BAPI_GOODSMVT_GETITEMS.
    This should help.
    Gisk

  • Identifying goods movements which have been barcode scanned

    Hi,
    We are developing the use of ITS for barcode scanning in the warehouse, using Symbol 9090 HHDs.
    The transactions used are MIGO-like:- MB01, MB11.
    Goods are issued to PM orders, goods are receipted.
    How can we identify and report in SAP which movements have been performed using the handheld device, and which have been performed using manual input directly in the SAP gui?
    Thanks.

    Hi..
            I think mb51 is the apt report...filter by movement type 101 (G.R.N) and from the list filter the materials and vendor...a bit lengthy process but will work.
    Edamanayil

Maybe you are looking for