Report (release 6.0.8.15.0) failure on tcp/ip connection to personal oracle 8.1.5

hi,how can i resolve this problem?
i use personal oracle with a tcp/ip connection and if i run a
report(developed with report builder oracle) i receive a
compiler error .if i run this same form on the server,the form
has no problem.
the only different is a client's call with tns (the listner is
start up)
thank and sorry for my bad english

Hi, how are you?
I read your file. On my computer, I got the same problem. First I installed Personal Oracle 8.15 version under window 98. The oracle home is e:\orale\ora81. Then I installed Form 8i in the orale home e:\oracle\ora. After installation, there are two SQLPLUS. One is under ora81 and another is ora. The one which is in e:\oracle\ora81 is working and it can bring up the database. Another one and Forms don't work. They can not connect to the local database. It means my client which is under e:\oracle\ora can't connect to my server which is under e:\oracle\ora81. I think I shoud set up the connection in tnsnames.ora by using Net8 Easy Config. I did it. It failed. Can you help me?
Thanks.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by harry dhillon ([email protected]):
No, you shouldn't have to to.
If you have Personal Oraacle 8 running properly on your PC, then you can just connect to the database from Developer V6 using your normal username/password. For example, if you log on to SQLPLUS as scott/tiger, then the same will work for your forms and reports. You don't even need to enter a connect string. I have it working OK on a Windows '98 PC, with Personal Oracle 8i, and Forms v6i.<HR></BLOCKQUOTE>
null

Similar Messages

Do I need a new license for Crystal Reports Release 2?

Post Author: jerryk
CA Forum: Upgrading and Licensing
Hi,
We have a license for Crystal Report XI. However we need Crystal Reports Release 2 since we are using .Net 2.0. I just tried installing the Crystal Reports Server on out test web server and it would not accept the license key we have. Do we need to get a new key?
jerry

Post Author: colin mackenzie
CA Forum: Upgrading and Licensing
Hey jerryk.
Check out this URL.
It will help.
http://www.businessobjects.com/products/reporting/crystalreports/xi_release_2.asp

Report release - Product Safety

Hi all,
I read on the SAP help portal, and I read this portion on the report release process. One of the example shown is like the following process flow:
1st - GS u2013 Report generated successful
2nd u2013 R1: Report accept by the Toxicologist
3rd u2013 R2: Report accept by the lawyer
4th u2013 CO: last status complete
5th u2013 RE: Report released.
My question is why a report create in EHS environment has to go through so many status (i.e. by several party) before it is finally released.
I am trying to understand from the point of business in EHS environment.
Can someone explain to me?
Thanks,
Karen.

Hi Karen,
In EHS,the reports which are created or distributed need to be legally compliant considering the environement impact of the substance .So in the creation phase,the template is made and the report is created as per the R&D persons or those who know the specific properties of the substance(Experts who know the properties of substance)
Once the report is ready this need to be analysed by the concerned departments for the properties / subsance characteristics by the toxicologist or some one who is familiar with the physical and chemical properties of the substance( Like exposure to the environment or toxicity in water,air etc) .Once they approve,the report should be checked for the legal compliance.For example,in which validity area ,what regulations etc..this is done and approved by some one from legal department.
Once all the approvals are done,the report is in completed phase.Now the same can be released/distributed across an interface.
Programs RCVDDISP,RCVDEVEN and RC1wwiwp trigers in background in report generation.
Hope this helps
Thanks
George

How to downgrade Oracle Forms and Reports Release 2 ?

Hi all,
I would like to ask what is the step to downgrade Oracle Forms and Reports Release 2 to Oracle Forms and Reports Release 1 ?
Thanks.

Hi,
There is no such process of rollback the patchset.
If you have a backup of the Forms and Reports Release 1 , restore it back.
Thanks,
Sharmela
Note: Please mark the answer as correct or useful if it helped you.

Problem of Installation of Oracle Forms & Reports Release 6i in Win XP Pro

I can install Oracle Forms and Reports Release 6i in a P4 WinXP machine by using different Oracle Home. But the Net8 Easy Config cannot be run. This can be solved by editing the file TNSNAMES.ORA manually to configurate the connection. After that, the forms is workable but when I print the report, the report background engine show the error for printing.
I am still asking for whether any patch files or update can be downloaded to fix the installation problem of Oracle Forms and Report 6i in WinXP Pro.

I don't have the 651, but the 865. The 865 came with a Mega disc and required installing the Intel drivers from the disc. Since the 865 is driven primarly by USB, windows would attempt to assign a driver to motherboard and devices, but would inevitably be wrong. Only by installing the Intel drivers were things found properly.
Is there any chance there are such drivers with the 651 as well?

Failure to find service connection URL

Get this message every time I enter my password in iTunes or App Store any suggestions? Failure to find service connection URL

Reset phone (no data loss): press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.

Failure (42458): Error accepting connection -5993 (Resource temporarily unavailable)

what will cause this error message for iplanet 4.0 web server?

Hi,
"failure (42458): Error accepting connection -5993 (Resource temporarily unavailable)"
The above error is Common message with SSL turned on with pre 3.6 Sp3 releases.
These were Spurious messages (defect 343349 in the release notes for 3.6).
I think it's fixed in 4.x version.
Thanks,
Daks.

I'm unable to login to facebook though I reinstalled twice, but as i try to login it gives an error message as timeout, connection failure or check internet connection.

Dear service provider, I'm unable to login to facebook even though i tried to uninstall and again reinstall as per the observation from the forum discussion.. but still it gives me arror as Timeout connection, or connection failure and check internet connection.. how to troubleshoot, pls suggest me..
2ndly I'm unable to search by some of the keywords in itunes. means iTune is not fetching the required information rather it gives no result found message..

Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

iOS: Troubleshooting Personal Hotspot - Apple Support

Restore Failure - Could not open connection to helper tool

I created a disk image on an external firewire drive using disk utility.
The external drive is bootable and I run the Disk Utility software from the external drive.
When I try to restore from the image selecting the source and target I get the following error after clicking the "Restore" button:
"Restore Failure
Could not open connection to helper tool."
Any suggestions on how to troubleshoot this?
Additional info:
MacBook Pro 2.16 Intel
Tiger 10.4.7
Boot ROM MBP12.0061.B00
SMC 1.5f10
Internal Hard Disk: ST9120821AS
External Hard Disk: FireLite FW800
All software and firmware up-to-date
Disk Utility 10.5.6 (198.12)

I've experienced the same problem. What I know is that we built a system image using Disk Utility on a MacPro and we experience this error when attempting to restore the image on another MacPro using Disk Utility.
I've successfully built system images of MacBook Pros and restored them without any problems. However, I believe I may have built the image using Carbon Copy Cloner. This may warrant some more experimentation using the different utilities.

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Sync failure because itunes cannot connect to the sync server PLEASE HELP!!

HELP! I cannot get my info back into my iphone.
During sync I get an error message that says 'sync failure because itunes cannot connect to the sync server''
I have had this problem today so i restored the iphone and it has synched the ipod portion but will not sync calenders, contacts , email accounts or bookmarks.
The restore erased all of these and now i cannot replace them.
Thank you in advance for any help in solving this crisis.

I had the same problem (not from day one but within the past couple months). Anyway, I wish I had made note of everything that the quick-and wonderful-Apple support did when I finally decided to give them a call today-after getting tired of not being able to update calendars and contacts and not seeing any helpful info here-unfortunately, I continue that legacy (as I can't remember everything I had to do to fix-sorry) Ultimately involves creating a new user I called mine IPHONE...then doing some of this and that-and finally merging info and going to "Terminal" and typing in some code...then deleting some of the old files, Took about twenty-minutes on the phone. Sorry I didn't think ahead for others and write al this down...but just know the Apple people were great. I talked to a gal for about ten minutes very methodically trouble-shooting. When nothing worked she shifted me over to a real nice guy who calmly and politely guided me through all the steps to fix this annoying problem. I hate to say it, but just get on the phone and-if you have the same experience as me-you will get 5 Star treatment and your sync will work like a dream. Every time I have to contact Apple Support (which isn't that often) my experience is nothing but the best. Unbelievable customer service! Methodical, Personable, and truly knowledgeable! There is a fix and it works like a dream. Not that hard but you'll need customer service to walk you through it-as I can't (sorry I can't be of much help...) Good luck!

Report : release blocked sales order

hi ,
Can nyone tell me. how to see report regarding ....who's( which user) released the blocked sales order?

hello, friend.
when you create a list using VKM4, you can click on a specific sales document number. you will be brought to the document. then you can click on Menu > Environment > Changes and see the person who released the order.
you can also see the release date by doing SE16 and selecting table VBAK. i'm not sure but i think its possible to see the person who released by going to another table. maybe somebody else can clarify.
thanks and regards.

Iblck release after computer crash or network failure

We are controlling equipment using ENET/1000 devices. The controlling computer has a redundant computer in case the primary fails. We use iblck to protect the bus when the equipment is under active control and need to restore service quickly if the computer fails. We have confirmed that the ENET/1000 does retain the lock after a failure however have not tested the duration of the timeout. How long does an ENET/1000 maintain a lock after it looses connection to the requesting thread and can this timeout be managed in any way?

Error handling won't work in this case, unless there is something I missed in the documentation. Only the process/thread that issued the IBLCK to an ENET/1000 can release it. If the computer that crashes is the one that issued the IBLCK, then there is no error handling that can be done.
Note we simulated the computer hard crashing by shutting down the network interface which effectively silently severs the connection to the ENET/1000 from that computer.
When we start the application up on the backup computer we cannot start utilizing the ENET/1000 bus until the ENET releases the previous lock from the crashed computer. According to the NI 488.2 driver manual, only the thread issueing the IBLCK can release it. Since that computer effectively hard crashed, there is no way to clear the IBLCK from a command since that thread is gone. I see no error handling that can capture this. We appear to be at the mercy of the ENET/1000 to release the lock. So we are looking to understand if that timeout is consistent, what the duration is, and is there any way to modify the timeout?
Thanks for your response,
Tom

ORA-00349: failure obtaining block size for '+Z' in Oracle XE

Hello,
I am attempting to move the online redo log files to a new flash recovery area location created on network drive "Z" ( Oracle Database 10g Express Edition Release 10.2.0.1.0).
When I run @?/sqlplus/admin/movelogs; in SQL*Plus as a local sysdba, I get the following errors:
ERROR at line 1:
ORA-00349: failure obtaining block size for '+Z'
ORA-06512: at line 14
Please let me know how to go about resolving this issue.
Thank you.
See below for detail:
Connected.
SQL> @?/sqlplus/admin/movelogs;
SQL> Rem
SQL> Rem $Header: movelogs.sql 19-jan-2006.00:23:11 banand Exp $
SQL> Rem
SQL> Rem movelogs.sql
SQL> Rem
SQL> Rem Copyright (c) 2006, Oracle. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem movelogs.sql - move online logs to new Flash Recovery Area
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem This script can be used to move online logs from old online
log
SQL> Rem location to Flash Recovery Area. It assumes that the database
SQL> Rem instance is started with new Flash Recovery Area location.
SQL> Rem
SQL> Rem NOTES
SQL> Rem For use to rename online logs after moving Flash Recovery
Area.
SQL> Rem The script can be executed using following command
SQL> Rem sqlplus '/ as sysdba' @movelogs.sql
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem banand 01/19/06 - Created
SQL> Rem
SQL>
SQL> SET ECHO ON
SQL> SET FEEDBACK 1
SQL> SET NUMWIDTH 10
SQL> SET LINESIZE 80
SQL> SET TRIMSPOOL ON
SQL> SET TAB OFF
SQL> SET PAGESIZE 100
SQL> declare
2 cursor rlc is
3 select group# grp, thread# thr, bytes/1024 bytes_k
4 from v$log
5 order by 1;
6 stmt varchar2(2048);
7 swtstmt varchar2(1024) := 'alter system switch logfile';
8 ckpstmt varchar2(1024) := 'alter system checkpoint global';
9 begin
10 for rlcRec in rlc loop
11 stmt := 'alter database add logfile thread ' ||
12 rlcRec.thr || ' size ' ||
13 rlcRec.bytes_k || 'K';
14 execute immediate stmt;
15 begin
16 stmt := 'alter database drop logfile group ' || rlcRec.grp;
17 execute immediate stmt;
18 exception
19 when others then
20 execute immediate swtstmt;
21 execute immediate ckpstmt;
22 execute immediate stmt;
23 end;
24 execute immediate swtstmt;
25 end loop;
26 end;
27 /
declare
ERROR at line 1:
ORA-00349: failure obtaining block size for '+Z'
ORA-06512: at line 14
Can someone point me in the right direction as to what I may be doing wrong here - Thank you!

888442 wrote:
I am trying to drop and recreate ONLINE redo logs on my STANDB DATABASE (11.1.0.7)., but i am getting the below error.
On primary, we have done the changes., ie we added new logfile with bigger size and 3 members. When trying to do the same on Standby we are getting this error.
Our database is in Active DG Read only mode and the oracle version is 11.1.0.7.
I have deffered the log apply and cancelled the managed recovery, and dg is in manual mode.
SQL> alter database Add LOGFILE GROUP 4 ('+DT_DG1','+DT_DG2','+DT_DG3') SIZE 1024M;
alter database Add LOGFILE GROUP 4 ('+DT_DG1','+DT_DG2','+DT_DG3') SIZE 1024M
ERROR at line 1:
ORA-00349: failure obtaining block size for '+DT_DG1'First why you are dropping & recreating online redo log files on standby.
On standby only standby redo log files will be used. Not sure what you are trying to do.
here is example how to create online redo log files, Check that diskgroup is mounted and have sufficient space to create.
sys@ORCL> select member from v$logfile;
MEMBER
C:\ORACLE\ORADATA\ORCL\REDO03.LOG
C:\ORACLE\ORADATA\ORCL\REDO02.LOG
C:\ORACLE\ORADATA\ORCL\REDO01.LOG
sys@ORCL> alter database add logfile group 4 (
2     'C:\ORACLE\ORADATA\ORCL\redo_g01a.log',
3     'C:\ORACLE\ORADATA\ORCL\redo_g01b.log',
4     'C:\ORACLE\ORADATA\ORCL\redo_g01c.log') size 10m;
Database altered.
sys@ORCL> select member from v$logfile;
MEMBER
C:\ORACLE\ORADATA\ORCL\REDO03.LOG
C:\ORACLE\ORADATA\ORCL\REDO02.LOG
C:\ORACLE\ORADATA\ORCL\REDO01.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01A.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01B.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01C.LOG
6 rows selected.
sys@ORCL>
Your profile:-
888442
     Newbie
Handle:      888442
Status Level:      Newbie
Registered:      Sep 29, 2011
Total Posts:      12
Total Questions:      8 (7 unresolved)
Close the threads if answered, Keep the forum clean.

Report (release 6.0.8.15.0) failure on tcp/ip connection to personal oracle 8.1.5

Similar Messages

Maybe you are looking for