Report-Report Interface (jump Target)

Hi,
I have a problem when I want modify a Assignment Details in Sender-Receiver. But only when I want change to Delete and when I enter again the modification to delete doesn´t work. Also it´s happenen only for development environment. Any idea???
Thanks.

Hi,
Pls chk SAP Note 1042673 - Error: Assignment details in the report-report interface.
Regards
CSM Reddy

Similar Messages

Report-to-Report Interface, Jump Target

Dear Friends,
Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
Thanks

H I Ramesh,
   see best example.. genrate one query on master data... and another query on transactiona data..( but make sure that... your transactional query should contain atleast one field that exist in first query)
      for example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS)
     nad generate second Query   on Employee transactional data ..( that contain..
EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
now go to RSBBS tcode... and give the first query name.. and in the down give the second query name..save it..
    now go to BEX and execute your first query.. and in that select any EMPLOYEE NUMBER and right click it--> and select second query name.. ..
now you can able to see that particular employee details only..
regards
@jay

Jump target RRI from BW report to CRM Portal

Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWer

Hi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf

Report-Report Interface from BW to Project Systems

I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
Thanks
Robert Williams
You cannot use the report-report interface to call up report RKPEP000
Message no. HF 800
Diagnosis
Line item report RKPEP000 is not suitable for the report/report
      interface.
Procedure
Always enter RKPEP000 as the receiver report for project line items in
      the report/report interface. This program uses the transfer parameters
      to determine which line item reports can be accessed.

Hi
I dont know whether you have solved the problem or not yet
But i came up with the same issue....
Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
OSS Note : 356166
Thanks

Report-to-Report Interface problem with default values

Hi all.
I have RTR interface where target query has default values, so when I jump to target query it doesn't return whole data because of this default filter.
Is it possible to remove this default filter in query in case it is executed through Report-To-Report?
I still need this default filter then I execute target query separately.

Dear Gediminas,
Make sure that you have same infoobjects which are having default values present in the 2 queries.
After createing settings in RRI...select that setting.....click on ASSIGNMENT DETAILS tab...
Assign Type as how they are in 1st query...
Assign selection type as how they are in 1st query...
Assign GENERIC to the rest of the fields..
Cintinue
Save.
Assign points if it is helpful.
Regards,
R.

Report-Report-Interface Workbook to Workbook

Hello all,
I am searching for a functionality which I would expect in BW-standard.
In Transaction RSBBS there is no possibility to define a Workbook as jump target.
As you select a query and then create the interface target it is possible to assign
a Webtemplate, Crystal Report, and so on as target but not a Workbook.
But as this is essential for end users who want to jump from Workbook to Workbook
and as I am not able to enter the ID for a Workbook in any of the target types I am
wondering if this basic functionality is just missing or if there is any workaround for this.
We are using SAP NW 7.0 with BW-Patch 20. Please let me know!
Kind regards, Klaus

Hi Klaus,
Just check this thread,you may get some idea.
Re: Drill-Down from workbook to Workbook
Rgds,
Murali

Using Report-to-Report Interface (RRI) in BEx Report Designer?

Dear experts,
I would like to know if it is possible to use Report-to-Report Interface in BEx Report Designer?
From what I read from this article
[(Creating Formatted reports using BEx Report Designer)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?quicklink=index&overridelayout=true], the RRI capability of query is not supported in BEx report. So is it true? And are there any workarounds to enable/emulate RRI capability in BEx Report?
Thanks in advance.
Regards,
Joon

Hi Joon,
It is possible to make RRI in BEX Report Designer by using Transaction Code - RSBBS .
Here you need to give the Target Query and Source Query names and than you can easily connect two reports or two levels of same report.
For further step wise description please check the below SDN document :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
I hope this document helps to sort out the queries.
Regards,
Akanksha

Report to Report Interface - Pass Key Figures

Hello,
I have setup a RIR interface on a Query to jump to another query for detailed inforamtion - works perfect.The issue I am facing is,there's a particular Keyfigure value in the sender query (derived from a Cube) which does not exist in the receiver query(ODS). Is there a way to get this information across to the Receiver Query ?
Thanks,
hdev

Hi, Hdev.
Do you have any documentation on how the Report to Report Interface works? If not, could you explain briefly what it is? Much appreciated!
Thanks,
Sarah-Jane

RRI Problem in EP - An error occurred with the report to report interface

I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?

Hi Frank,
What was the solution?
Regards,

Scenario for report to report interface

hi experts
i want to know how you people used R/ RI report to report interface in your project, explain me ur experince working with RRI, thank you

Hi.........
1)Suppose amount of data in an infocube is very huge........definitely it will detoriate the performance of the query....it will slow down the execution of the query......until you have implemented BIA...or aggregates.....
To overcome this situation.....u can use RRI.......Rather than storing all data in a single infoprovider......and trying to execute all these data...you can seperate the data and store in a number of infoproviders............and perform RRI from one infoprovider to another for detailed information......
2) You also hav the option to jump from one system to another using RRI........like from BW to ECC......
3) It also helps to layer your data....summary data in one infoprovider........and detailed data in another infoprovider.....connect them using RRI....
Hope this helps........
Regards,
Debjani......
Edited by: Debjani Mukherjee on Nov 7, 2008 2:38 AM

Report to Report interface - restrict query results

HI Experts,
following issue. i'm using the Report-Report interface to jump from a report to a very detailled report.
my concern is if the user don't filter the first report to a specific Item the receiver report can explode trying to get all items.
is there any technical possibility to restrict this i.e. display message or check the number of items selected?
note: i'm working with BEx analyzer.
thanks to all,
regards,
Younes

HI,
there is a mandatory variables for time restriction.
but not for the material ids so this was the requirement.
are there any other possibilities?
thanks,
regards,
YNS

RRI (Report to Report Interface)

Hi all
i search in forum and i got a ans., but i'm not able to understand this., what is reporting to report inter face(RRI)
t-code RSBBS., when do we use., can u pls explain me this one and as wel give on scenario Can u pls give brief and
step by step scenario
Kind

Hi krisna,
Report-To-Report Interface is used to navigate from One Report To Another Report. Say for example Your Manager wants to view Yearly report(YTD) which gives sales for Jan, Feb, Mar etc.... he aswell wants to view detailed monthly report for any month say for march..... by right clicking on YTD report he should get Monthly(MTD) report.....so this can be achived by RRI.
In RSBBS you will have to assign the Source query(in this case it is YTD report) and Target query(in this case it is MTD report). Means the user is able to view YTD and MTD at same instance. Its just like drilldown between reports. Let me know if u have any doubts?
Regards,
Vishnu.

Report for sales target & Production target

Report for sales target & Production target which should include the following fields
Sales Target
Revised Sales Target
Production Target
Revised Production Target
Action Need to be taken

Hi
If you are using sales and operation planning in make to stock scenario its simple . As You input target sale plan and target production plan for whole one year (MC84) . So this data can be pulled out from the tables .
For Action Need to be taken and revision you may need to have new table .
Neal

Report to Report Interface Error

Hello,
I have a summary query which needs to go to detail query. I used the RSBBS transaction to designate the sender and receiver query. I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available. However, when it tries to transfer, I get the following error. I know these queries are saved and active. I can run them each independently but cannot get the Report-to-Report Interface to work. Any help would be greatly appreciated.
Thanks,
Lynda
error:
query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
because it does not exist on the BW Server.

Hi Chandran,
Thank you for your reply and the two links. I am reviewing the assignment details and have a few questions. I currently only have 2 fields assigned - as variables - material and plant.
Everything else is set to generic.
My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
The summary report comes up with correct data.
Material Plant UOM Yearly Budgeted Amt Jan/Yr Feb/Yr March/Yr etc
The user then wants to drilldown to detail behind a month. i.e. Jan/Yr
I created the detail query to ask for material and plant which then provides
Material Plant Purchase Order Main Vendor Freight Vendor UOM Qty Recvd Price and Freight Amoutn
There will be multiple Purchase Orders.
One thing I am not sure about transferring fields. Do I need to designate the month/year as a variable in my detail query along with material and plant? I am a bit fuzzy as to the whole process.
Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
Thanks for your patience and help...
Lynda

Bex report to report interface dynamically based on Value in the query

Hi,
Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
For example my query has the below data
Plant | KPI | Quantity
P1 | A | 20.00
P2 | B | 25.00
When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
Is this possible in Bex report to report interface or any other way.
Please suggest
Thanks in advance.

Hi
we have RRI in sap bw. ( TCODE RSBBS.)
Below article will enlighten you about this topic .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
hope this helps

Report-Report Interface (jump Target)

Similar Messages

Maybe you are looking for