Report Report Interface open in same Window

Hi experts,
I have an WebApplication which can jump to another Query.
I want that query open in the same window without replacing the WebApplication. I tried all the open modes in WAD but they allways replacing the whole WebApplication or open in a seperate window.
Has anyone an idea i can do this?
thanks in advance
Quan

Hello Quan,  
Check the HTML source of the web template and include
TARGET = _SELF in the <A> tag
Example
<A href=your url *TARGET = _SELF*> Report Name </A>
This will open the new report in the same window.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Similar Messages

  • How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

    In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
    However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
    I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
    Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

    Hi Eric,
    I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
    Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
    I used a 2 element array going into a four loop
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
    Defining the working director C:\altera\12.1sp1\qprogrammer\bin
    And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
    To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
    Thanks for the interest though
    Best regards John

  • HTML and XML files open in same window(KM Navigation iView)

    Hi All,
    I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
    Thanks & Regards,
    Venkatesh R

    Hi ,
    check the below thread and try options mentioned in it
    https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
    Koti Reddy

  • XML Edit Form should open in Same window (Not a popup).

    Hi all,
    I have requirement to open the Edit form in Same window (Not a popup).
    Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
    And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
    Its possible? How to achieve this? Helpful replies will be appreciated.
    Thanks and Regards
    Thillai J

    Not solved

  • Menubuilder- Open in Same Window?

    I have the advanced link setting for my links as "Open in
    same window." The links continue to open in new windows. Is this
    feature not desinged to launch the files in the same window as the
    menu. Please help. Thanks.

    Hi MissDona
    I'm going to say "it depends". Normally, this is the default
    behavior. But it likely will depend on the output type you are
    creating. For example (and I'm somewhat assuming you fall into this
    category) if you create .EXE output from MenuBuilder, a new
    instance or window always opens, as MenuBuilder packages up the
    Flash Player inside the .EXE. Thus, this version of the player runs
    from a temporary location and has no clue about other movies and
    whatnot.
    Cheers... Rick

  • JS Grid hyperlink in new window , how to open in same window

    I am using JS grid in our project server application. I have a JS grid with a hyperlink and on clicking the hyperlink it navigates to a reporting list present on the same site . My problem is when we click on the hyperlink page it opens a 
    new window instaed of this behaviour i want to open it in same window. JS grid hhyperlink column has only two properties Display and Address. While on the project center page  in Project server when we click on any project it opens the project site
    in the same window.
    dr["Hyperlink"] =
    newHyperlink()
    { Display = "Contoso",
    Address = "http://devpwa2010/pwa/projects.aspx"}

    If the CSV files are send as text/plain like in this case then Firefox will open them in a tab instead of offering to download and save the files.<br />
    Hold down the Alt key and left-click the links to get a download dialog or use the right-click context menu to save the file.

  • How to replace LOV popup with a search screen that opens within same window

    Hi,
    We have a requirement to get rid of LOV popups from our custom OA pages. They need to be replaced by search pages that open within the same window.
    For example, we are creating an employee assignment to a department. We first find the employee (currently using the LOV), then the department (currently using another LOV) and then save the new assignmnet record.
    The two options we have are:
    1. search page fully replaces the current page, and when the user has selected a record, it returns them back to the first page, setting some fields, eg. employee id, employee name, employee address fields.
    2. search page opens in a region of the same page (PPR?) and then disappears once the user has seleted a record.
    I am not sure how to do this, and really could do with some pointers, i.e. the best way to achieve this.
    Thanks in advance
    Mark

    Both of your options are valid with some pros and cons.
    option 1: It gives you a nice interface but then you will have a pass a large number of data back to 1st page.
    options 2: You can use the Rendered property of a serach region at runtime and achieve your goal. Since it will be a single page, result set to base items mapping will be easier. Though this kind of UI will look bad if your search region is big.
    So it all depends on which option is easier to implement for you.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Need help with making the webpage open in same window

    Hi. I want to make the menu page load in the same window.
    Right now, if you click on the index page, it will open the menu
    page in a new window. I know I need to use _self, or _parent. But I
    couldn't figure out where to insert it. Please help. Thanks.

    in case of your mentioned function it'd be just like:
    inv_btn.addEventListener(MouseEvent.CLICK,
    buttonClickHandler);
    function buttonClickHandler (event:MouseEvent):void {
    navigateToURL(new URLRequest("
    http://www.detailshardware.com/menu.html"),"_blank");
    That's all.

  • How to have Safari links always open in same window

    I've been researching how to have Safari always open links in the same window, but it appears this can't be done?  I've seen this third party app, but am afraid of installing something that doesn't come from the app store because it might harm my macbook.  Does anyone have any thoughts about how to have links always open in the same window? Or how to find out if I can trust this app:
    http://canisbos.com/linkthing

    You can reset the folio by triple tapping the title in the nav bar.
    Bob

  • Can't get URL to open in same window

    I am using Flash ActionScript3 - My banner has 3 images, each
    displays for ~5 seconds. I have each image linked to a web page
    with more info about each image. The problem is that I can't get
    the URLs to open in the same window! Each click opens another
    browser window. All attempts to resolve this using suggestions
    found in my googling for the answer results in error messages. Any
    help would be greatly appreciated!
    Here's my script for one of the images:

    In getURL you had a method parameter _self, look URLRequest
    definition in Flash help to see if it receives a similar parameter.
    _self is for link to open in same browser window, _blank is used
    for a new window.

  • Force Flash weblink to open in SAME window as movie

    I'm using Adobe Encore CS4 to create a project that I want to export to Flash. However, I want one of my menus to be replaced by a web site.
    The goal is to have a flow such that:
    Menu 1.
    <User Clicks Item #1>
    Timeline plays
    user is forwarded to a website
    I have implemented this as follows:
    Menu 1.
    Button 1 --> Timeline --> Menu 2
    on menu 2, I set the description to:
    <weblink href="webpage.html">
    as suggested in the manual.
    This works, apart from the fact that after the timeline ends, the flash movie goes black, and a new window is opened with webpage.html (which is blocked by popup blockers unless specifically allowed).
    What I would like is for webpage.html to be opened in the same window, so that the flash movie is no longer visible.
    I have tried modifying the description field to
    <weblink href="webpage.html" target="_self">
    but it doesn't help. In the generated AuthoredContent.xml, I've tried changing the <action> item:
    <Action type='Link' url='webpage.html'>
    to:
    <Action type='Link' url='webpage.html' target='_self'>
    to no avail. I can't seem to find any documentation on these fields.
    Is anyone able to help?
    Thanks in advance!

    Hi,
    I'm not aware to force this behaviour, but if it is a regular link you can drag the link onto the same tab heading you are currently looking at. Obviously this won't work for form submissions where there is no link to drag as such

  • Have search results link open in same window

    Hello,
    I'm looking at the FlexUI stuff and wondering before I delve too deeply... that and my Portal is currently not cooperating.  How can I make it so that when the user clicks on a search results link, it shows in the same window (as opposed to opening a new window)?
    Thanks,
    Mike

    Hi there,
    we had the same issue - I opened an OSS and got following reply :
    <i>
    <b>08.03.2007 - 12:45:49 CET    SAP    Reply</b>
    I have checked from my development colleague and confirmed that
    this parameter is not supported currently and development has recently
    no plans to support this feature.
    I apologize for the inconvenience caused here.
    Thank you for your cooperation.
    Best Regards
    </i>
    Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
    > Please reward points :o) <

  • Search results link which open in same window

    Hello,
    i want to open the search result documents in the same window as the search result. Therefore i edit the field 'Target Window Type' in the SearchResourceRenderer to 'SELF'  which is used in the SearchResultLayoutSet.
    But the document also is opened in a new window.
    What i have to do?
    Best regards,
    TomSd

    Hi there,
    we had the same issue - I opened an OSS and got following reply :
    <i>
    <b>08.03.2007 - 12:45:49 CET    SAP    Reply</b>
    I have checked from my development colleague and confirmed that
    this parameter is not supported currently and development has recently
    no plans to support this feature.
    I apologize for the inconvenience caused here.
    Thank you for your cooperation.
    Best Regards
    </i>
    Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
    > Please reward points :o) <

  • Trying to have pages open in same window

    Hello! Total newbie here just getting my feet wet in iWeb.
    Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
    I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
    Take a look to see what I mean: http://overcat.net/home.html
    Thanx so much for whatever help anyone can provide.
    Message was edited by: noisejoke

    I'm assuming you mean the little button in the upper right corner.
    No. The little green button in the upper left-hand corner. BTW, whether you can control the initial window's size is application-specific. Some, like Word 2004 remember when launching a new window; however, you might have to open each previously saved document, resize it, and save it. If an application doesn't offer that feature, then you'll have to take it up with the creator.

  • Navigatetourl won't open in same window and in infinite refresh

    I have a project that requires a skip button and to go to a specified url in the same window once the animation is complete. The button works, however the navigatetourl in the last frame is not behaving.
    Here is the code I've placed in the last frame:
    addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
    function fl_EnterFrameHandler(event:Event):void
        //Start your custom code
        // This example code displays the words "Entered frame" in the Output panel.
        navigateToURL(new URLRequest("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), "_self");
        stop();   
        // End your custom code
    I've tried moving it to an earlier frame, placing a stop in the earlier frame, moving the stop command to after and so on. No matter what I do, the new url opens in a new window and is in a constant state of refresh. I also have the loop turned off but the animation begins to load the first frame again anyway.  Please help. I've tried many fixed listed in forums that are all about the same with no different results.  You can view my animation here: http://www.student.nvcc.edu/home/amlayne/ite170/flash/graded%20assignments/myintro.html
    NOTE: You will have to close the browser to get the refresh to stop.
    I've been working on this one issue two days and am at a complete loss.

    Any thoughts on why my button now won't open in the same window? I'm getting a sense the built in code snippets don't work as they should, or I'm just making silly mistakes. Here's the code:
    btnSkip1.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
    function fl_MouseClickHandler(event:MouseEvent):void
              // Start your custom code
              // This example code displays the words "Mouse clicked" in the Output panel.
    navigateToURL(new URLRequest("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), "_self")
              // End your custom code

Maybe you are looking for