Report - Report Interface (RRI)
Hi All,
I am trying to figure out how the RRI function works with the NW2004s. I have configured this on the back-end using the RSBBS transaction but it does not show up neither in the Analyzer nor on the Web reports/Portal! Does anybody have an idea on how to go about this?
thanks,
PN
If you're working with a web template, make sure the parameter MENU_RRI is turned on in the entries of the context menu.
See context menu options here: http://help.sap.com/saphelp_nw2004s/helpdata/en/43/152fa54b315a38e10000000a422035/frameset.htm
If you are rendering a query in the portal, it will be using the standard 0ANALYSIS_PATTERN template - it's a good idea to save a copy this template before making any changes in the Web Application Designer.
If the RRI is set up correctly using RSBBS (are you going from query to query, or from query to template, or something else?) the RRI option should appear in the context menu when you execute the query in the BEx Analyzer (Excel add-in).
Similar Messages
-
Which Table will have 'Report to Report Interface (RRI)' Details?
Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna -
Report to Report Interface (RRI)
Hi,
I had a Query on a Cube (Multiprovider) and I had a query on DSO
How can i perform Report to Report Interface (RRI) for this two queries
ThanksGo to transaction RSBBS in the BW back end (i.e. via SAP Logon pad).
Add the name of the query based on the MultiProvider in the Sender box.
Click create.
Select Report Type BW BEx Query (default selection).
Enter name of query based on DSO in Receiver Object. Add the description for the query that you want to appear in the Goto menu in BEx Analyzer.
Click apply.
Save.
Done! -
RRI (Report Report Interface) with ABAP Sender program
I need to call a Report Writer report from a bespoke ABAP program. I can call transaction START_REPORT to do this, but I wondered if the Report-Report Interface can be used here.
Has anyone ever programmed a direct call to the RRI interface in ABAP?Hi Robin
I know the answer comes late but you might find my wiki posting helpful:
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP+Report-Report-Interface
Regards,
Marc
SAP NetWeaver RIG -
Report Designer - Report-Report-Interface (RRI)
Hi,
if is possibility to insert a Report-Report-Interface in Report Designer?
If yes, can you please give me step by step procedures for Report-Report-Interface in Report Designer?
Thanx in Advance.
WolfgangThere are also some basis tasks which need to be complete before the servers can communicate.
You need to maintain entries in table TWPURLSVR and ensure that web application server is installed and running correctly.
Then you can maintain sender/receiver settings in RSBBS. You will need to create new settings that link the query/cube to a specific report/transaction in ERP. -
Report-Report Interface from BW to Project Systems
I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
Thanks
Robert Williams
You cannot use the report-report interface to call up report RKPEP000
Message no. HF 800
Diagnosis
Line item report RKPEP000 is not suitable for the report/report
interface.
Procedure
Always enter RKPEP000 as the receiver report for project line items in
the report/report interface. This program uses the transfer parameters
to determine which line item reports can be accessed.Hi
I dont know whether you have solved the problem or not yet
But i came up with the same issue....
Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
OSS Note : 356166
Thanks -
Info required on Report Report Interface
Hi Experts ,
Can anyone please provide inputs regarding the Report Report Interface . Any document will be highly appreciated.
Regards
GarimaHi Garima,
Links ................
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=3353440
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=2762562
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=1846978
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=180080
The steps to create RRI
1)Goto T code RSBBS
2)In the Sender Query -give the Query name
3)Press Create tab which is there on the Right Top
4)It will as for a list select the Query name in the Bottom
5)and Press OK.
6)Come back to the main Screen os RSBBS and Select the Receiver Query and click Assignments.
7)Make them objects as Delete.
8)Save and Execute the Query ,Sender Query.
9)Right Click on the Query ,we will find GOTO Tab ,Drill down further
we can view the Second Query.
10)we can view the Second Query through first query
Hope it Helps
Get bak if u have any issues
Rgds
SVU -
Missing hierarchy in Report-Report Interface
Hello friends,
I have a problem with hierarchies in RRI. The scenario is like this:
I have two reports based on the same Multiprovider, let's say report A and report B. Report A displays rows based on the Cost Center hierarchy and works fine. Report B displays rows based on Cost Element hierarchy and works fine too. The problem appears, when I am in report A and I jump (I go to) to the report B using RRI - data is not displayed in the hierarchy form anymore.
Your help will be appreciated.
KooyotHello
This problem became urgent.
Does anyone have an idea?
Report A - rows in hierarchy of Cost Centers
Repot B - rows in hierarchy of Cost Elements
Kooyot -
Report-Report Interface ECC Reports
Dear all,
I'm making a report using report painter (TCode GRR2) and now I need to drill-down to the documents. I think that I can build it via report-report interface.
So, have I to use RSBBS tcode to built it? In fact, I need to built a drill-down to a ECC table, Is the process the same?
Could anybody explain me steps to follow to built it? thanks in advance.
Kr
Arriamu.You assign drill-down report at report group level (GR52).
Report/Report interface > Configure, use the "insert row" icon to assign reports. -
There is a report needed which will be started with a variant by a job.
Reportname: ZRF_INT_SPOOL_SEND
That report is supposed to copy each day the lists of several interfaces from
the spool into a file and to send this file as an attachment by email.
Parameters of this report are:
- interface numbers(several!)
- mail addresses of the receivers
This report finds the spoolnumbers of the lists, which were created by the interfaces run.
The spool numbers are found in the table TSP01.
With the help of these spool numbers the lists can be read in the spool and copied into a file.
The report sends this file as an attachment by email to the receivers.
If the report finds no list for an interface on this day, an error message has to be sent by that email.
In the field subject of the emails the text SIXSIGMA is required.
The spool numbers are found in the table TSP01. The fields RQTITLE and RQTIME are key.
The functional module RSPO_RETURN_ABAP_SPOOLJOB
can be used. It reads with import parameter spool number a list from the spool into an internal table.
For sending an email e.g. the functional module SO_NEW_DOCUMENT_ATT_SEND_API1 can be used.
how to start the coding with this
can you send me the code to proceed furtherhave a look at http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
-
Report Report Interface Variable Values Transport
Hi,
I'm trying to use the report report interface for passing variable values.
How can I pass variable values of the sender query into the reciever report?
An example:
- I've used the 0CALYEAR time characteristic infoobject with a suitable input variable in the sender query.
- The sender query is used in the report (web template)
for a chart in away that the x axis peresenting the years (is the 0CALYEAR).
- I'm trying to pass the mentioned variable input - and no the selected year from the chart (by generically), into the reciever report queries which contained the 0CALYEAR infoobject.
Best Regards,
Shani BashkinDEar Shani,
Did you check the assignment details onceagain on the 0CALYEAR in RSBBS transaction..
regards,
Hari -
Report Report Interface: No applicable data found
Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
MartinHi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit -
Report-Report Interface (jump Target)
Hi,
I have a problem when I want modify a Assignment Details in Sender-Receiver. But only when I want change to Delete and when I enter again the modification to delete doesn´t work. Also it´s happenen only for development environment. Any idea???
Thanks.Hi,
Pls chk SAP Note 1042673 - Error: Assignment details in the report-report interface.
Regards
CSM Reddy -
Require Project Management Base tables names , reports and Interfaces
Hi Group ,
This is azamtulla Khan ,I am new to oracle projects and i dont have idea on it.I dont know its shotname also .
If any body send base tables name , reports and Interfaces for the same it will be grate to me.
Thanks in Advance.Azamtulla,
I recommend you look at the Applications Documentation (http://www.oracle.com/technology/documentation/applications.html) web site. Just pick your Applications (EBS) version and scroll til you find the Projects Resource Management link. Another option would be to visit the Oracle ETRM web site (http://etrm.oracle.com/pls/etrm/etrm_search.search).
Hope this helps.
Craig...
If a response is helpful or correct, please mark it accordingly -
Crystal Reports "Report Application Server"
Does anyone have any experience with Crystal Reports' Report Application Server (RAS)?
The provided documentation is very thin and support are taking an age to respond.
I want to use a Bean as a data source for a report. The blurb says you can do this, but the only documented way I can find is for the bean to return a ResultSet, completely missing the point of using a bean or EJB in the first place.
Now, Seagate's sales blurb states that Beans and EJBs can be used as data sources, but if the only way to do this is to return a common or garden ResultSet, what's the point of the bean???
So, has anyone sucessfully used a bean or EJB as a data source for report generation under RAS, or merely CR in general, without resorting to a ResultSet??Crystal Reports YUK!! especially in Java Forum!Tell me about it!!
But, like many developers, I don't get a choice. I have to use CR, and I have to integrate it into a Tomcat (4.1.24) based app. There is a Java API for RAS, but it is a pile of dung. Can you imagine publishing an API with public methods with 'do not use, for internal use only' plastered all over them!!!
But still, back to the original question, I have to find a way of doing this, but Seagate's javadocs are a mess, as are the howto docs. All of the examples, as you might expect, are childishly simple and don't give any insight into the large and hideous API :(
Here is an example of a CR howto.....
There appear to be two ways of creating a data source that isn't an existing report or a database query. This
Runtime data sources
One of the strengths of RAS over the Crystal Reports application, is that the RAS
can use data generated programatically at runtime. With a runtime data source,
you can take data from any source�such as a database, a data stream, or a flat
file�manipulate it with the programming language of your choice, and display it
with RAS.
To use a runtime data source
1 Put your manipulated data in a rowset form that can be processed by the RAS.
Consult the Rowset object and interface in the SDK JavaDocs, for details on
creating rowsets.
2 Create and fill the Dataset object with the rowset data.
3 Create a RowsetController object.
4 Add or set the data source using the RowsetController�s AddDataSource or
SetDataSource methods respectively.
The runtime data source is now available for use.
Note: If you create a report based on a data set, the data that is used is not saved
with the report. To populate the report with data the next time you open it, you
must either re-apply the data source to see current data, or access a saved version
of the data source for preview.
All well and good, but RowsetController doesn't have an AddDataSource or SetDataSource method!!!!
and this......
JavaBean custom data sources
You can use a JavaBean (or a Java class that does not extend the bean type) in order
to specify a custom data source. In order to do this, you will need to:
� Creating a Java class that specifies a custom data source
� Referencing a java class to provide data for a report
Creating a Java class that specifies a custom data source
To use a JavaBean (or a Java class that does not extend the bean type) in order to
specify a custom data source, you will need to create a class that serves as a Java
Beans Connectivity data source for creating Crystal Reports.
This class will need to conforms to the JavaBean standard by defining private
properties that are accessible only through get and set methods. In this way the
Crystal Reports designer can introspect the class as a Bean. The JavaBean
connectivity classes require the following.
� The constructor must have zero parameters.
� Methods that are used as "tables" must have a return type of ResultSet.
� Statement objects must be created using the
ResultSet.TYPE_SCROLL_SENSITIVE and ResultSet.CONCUR_READ_ONLY
arguments.
Note: Methods returning ResultSet can take arguments, these are treated as
Stored Procedure parameters by Crystal Reports.
Now, what the hell is the point of going to the trouble of abstracting your business data into a bean or EJB, if that bean has to return a ResultSet for Crystal Reports to use??!! -
Problems with Page Break in an Interactive Reporting report
Hello everybody,
Platform: Hyperion System 9.3.1.
I have serious problems in managing the 'page break' in an Interactive Reporting report.
The report shows sales data by store, with article and colour details and it is organized like this:
group 1: geographic area
group 2: country
group 3: city
group 4: store
columns: article, colour
facts: quantity, price, value
My client's request is to perform a page break at the store group level, meaning that apart from the first store occurance, any change in the store value shoul start a new page.
The requested result is like this:
page1: geographic area1
country1
city1
store1
data store1...
page 2: store2
data store2...
page3: store3
data store3...
I tried several combinations of using Break After and Break Before on the store group, with Keep Next / Keep Together and it was impossible to obtain the desired result.
If I use Break Before the result is as follows:
page 1: geographic area1
country1
city1
page 2: store1
data store1...
page 3: store2
data store2...
If I use Break After the result is as follows:
page 1: geographic area1
country1
city1
store 1
page 2: data store1...
store 2
page 3: data store2...
even if I specify 'Keep with next' or 'Keep together' for store group and the store data table.
Any help will be very very appreciated because I've been trying for weeks to figure out this issue.
DanielaFirst start without using any of the Keep with Next and Keep together.
Second. try putting the Page Break in the Group Footer. You do not need to keep it visible
Then you may want to repeat headers on Store in case the Store's Detail rolls onto next page
Hope this helps
Wayne
Maybe you are looking for
-
PO custom XML report output shows junk characters
Hi, One of our PO custom XML report's output(pdf) shows junk characters. when these junk characters are copied to any text editor, it shows correct text characters. Below are our environment details: RDBMS: 10.2.0. Oracle E-Business suite: 12.0.6 OS
-
MIE1 :: Sale order cycle count issue
Dear All, II am using transaction MIE1 to create inventory documents for sales order stock. I am receiving many more items to count than expected. I checked the cycle count indicator and materials coded to be counted only once a year and last counte
-
What is the PPPOE and PASSWORD
We are trying to connect a PS3 to the fios router and its asking for the PPPOE and PASSWORD. What is this? How do we find this out? We tried our Verizon username and passcode. That is not working. Plz help!
-
Data source not getting replicated
hi all, i have created a generic datasourc and when i tried to replicate the datasource in BI, its not getting replicated at all.\ the datasource is active in rsa5. I tried to replicate the application component but still the particulate datasource
-
Any description on how to use the Text Editor used for this Forum?
I am very frustrated when trying to use the text Editing functions (without use of HTML, that I do not undertstand) that can be used to create Posts in this Forum . Can somebody point me to a good description of the Text Editor used to enter/edit Pos