Report-Report-Interface Workbook to Workbook

Hello all,
I am searching for a functionality which I would expect in BW-standard.
In Transaction RSBBS there is no possibility to define a Workbook as jump target.
As you select a query and then create the interface target it is possible to assign
a Webtemplate, Crystal Report, and so on as target but not a Workbook.
But as this is essential for end users who want to jump from Workbook to Workbook
and as I am not able to enter the ID for a Workbook in any of the target types I am
wondering if this basic functionality is just missing or if there is any workaround for this.
We are using SAP NW 7.0 with BW-Patch 20. Please let me know!
Kind regards, Klaus

Hi Klaus,
Just check this thread,you may get some idea.
Re: Drill-Down from workbook to Workbook
Rgds,
Murali

Similar Messages

  • Role component for saving reports as workbooks

    Hi,
    Role component which allows users to save reports as workbooks. Any help greatly appreciated.
    Regards,
    Reddy.

    Check
    [assigning S_USER_AGR Authorization Objects;
    [Save woorkbook authorization profile;

  • Send mail BEx reports or workbooks as Excel attachment

    Hi BI Team
    I have a requirement to mail BEx reports or workbooks to users as excel attachment , I have tried out with Reporting agent and BEx broadcaster .My system is BW3.5.
    Following option used
    1) Bex broadcaster but, I dont have pre calc server so this option would not work.
    2) SAP AG document which creatd by durairaj using ABAP, I am getting the excel file in my outlook box but content was in ascoii   
        format,
    3) I creatd reporting agent with print background option but dont know where to check the output.
    Regards
    YuvaraajP

    Hi
    Thanks for the update however, Is there any option to send mail as excell sheet without using Pre calc server.
    Regards
    YuvaraajP

  • Report to Report Interface Error

    Hello,
    I have a summary query which needs to go to detail query.  I used the RSBBS transaction to designate the sender and receiver query.  I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available.  However, when it tries to transfer, I get the following error.  I know these queries are saved and active.  I can run them each independently but cannot get the Report-to-Report Interface to work.  Any help would be greatly appreciated.
    Thanks,
    Lynda
    error:
    query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
    because it does not exist on the BW Server.

    Hi Chandran,
    Thank you for your reply and the two links.  I am reviewing the assignment details and have a few questions.  I currently only have 2 fields assigned - as variables - material and plant.
    Everything else is set to generic.
    My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
    The summary report comes up with correct data.
    Material   Plant UOM Yearly Budgeted Amt  Jan/Yr Feb/Yr March/Yr   etc
    The user then wants to drilldown to detail behind a month.  i.e.  Jan/Yr
    I created the detail query to ask for material and plant which then provides
    Material   Plant   Purchase Order Main Vendor  Freight Vendor UOM Qty Recvd Price and Freight Amoutn
    There will be multiple Purchase Orders.
    One thing I am not sure about transferring fields.  Do I need to designate the month/year as a variable in my detail query along with material and plant?  I am a bit fuzzy as to the whole process.
    Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
    Thanks for your patience and help...
    Lynda

  • Bex report to report interface dynamically based on Value in the query

    Hi,
    Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
    For example my query has the below data
    Plant | KPI | Quantity
    P1 | A | 20.00
    P2 | B | 25.00
    When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
    Is this possible in Bex report to report interface or any other way.
    Please suggest
    Thanks in advance.

    Hi
    we have RRI in sap bw. ( TCODE RSBBS.)
    Below article will enlighten you about this topic .
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
    hope this helps

  • Using Report-to-Report Interface (RRI) in BEx Report Designer?

    Dear experts,
    I would like to know if it is possible to use Report-to-Report Interface in BEx Report Designer?
    From what I read from this article
    [(Creating Formatted reports using BEx Report Designer)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?quicklink=index&overridelayout=true], the RRI capability of query is not supported in BEx report. So is it true? And are there any workarounds to enable/emulate RRI capability in BEx Report?
    Thanks in advance.
    Regards,
    Joon

    Hi Joon,
    It is possible to make RRI in BEX Report Designer by using Transaction Code - RSBBS .
    Here you need to give the Target Query and Source Query names and than you can easily connect two reports or two levels of same report.
    For further step wise description please check the below SDN document :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
    I hope this document helps to sort out the queries.
    Regards,
    Akanksha

  • CO 1SRJ-001: Too many line items selected via report interface

    Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year):  provides an overview for the last 12 periods of actual and plan data.
    When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
    For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods:  2008/9 to 2009/8.  But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
    I searched and found Note 127643 that described a similar but not exactly the same situation.  Have anyone have any problems with this report?  Any suggestion is appreicated.
    Regards,

    Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved.  The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months.  The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
    SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version.  I imported the updated version of report from client 000 and now it works fine.

  • Report-Report Interface ECC Reports

    Dear all,
    I'm making a report using report painter (TCode GRR2) and now I need to drill-down to the documents. I think that I can build it via report-report interface.
    So, have I to use RSBBS tcode to built it? In fact, I need to built a drill-down to a ECC table, Is the process the same?
    Could anybody explain me steps to follow to built it? thanks in advance.
    Kr
    Arriamu.

    You assign drill-down report at report group level (GR52).
    Report/Report interface > Configure, use the "insert row" icon to assign reports.

  • Which Table will have 'Report to Report Interface (RRI)' Details?

    Hi all,
      Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
    Thanks in advance.

    Hi,
    Serach in these tables
    RSBBSCUBE
    RSBBSCUBEDIR
    RSBBSQUERYDIR
    Cheers..
    Krishna

  • Report-Report Interface from BW to Project Systems

    I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
    Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
    Thanks
    Robert Williams
      You cannot use the report-report interface to call up report RKPEP000                                                                               
    Message no. HF 800                                                                               
    Diagnosis                                                                               
    Line item report RKPEP000 is not suitable for the report/report        
          interface.                                                                               
    Procedure                                                                               
    Always enter RKPEP000 as the receiver report for project line items in 
          the report/report interface. This program uses the transfer parameters 
          to determine which line item reports can be accessed.

    Hi
    I dont know whether you have solved the problem or not yet
    But i came up with the same issue....
    Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
    OSS Note : 356166
    Thanks

  • Report to Report Interface - Pass Key Figures

    Hello,
    I have setup a RIR interface on a Query to jump to another query for detailed inforamtion - works perfect.The issue I am facing is,there's a particular Keyfigure value in the sender query (derived from a Cube) which does not exist in the receiver query(ODS). Is there a way to get this information across to the Receiver Query ?
    Thanks,
    hdev

    Hi, Hdev.
      Do you have any documentation on how the Report to Report Interface works?  If not, could you explain briefly what it is?  Much appreciated!
    Thanks,
    Sarah-Jane

  • Report to Report Interface (RRI)

    Hi,
    I had a Query on a Cube (Multiprovider) and I had a query on DSO
    How can i perform Report to Report Interface (RRI) for this two queries
    Thanks

    Go to transaction RSBBS in the BW back end (i.e. via SAP Logon pad).
    Add the name of the query based on the MultiProvider in the Sender box.
    Click create.
    Select Report Type BW BEx Query (default selection).
    Enter name of query based on DSO in Receiver Object. Add the description for the query that you want to appear in the Goto menu in BEx Analyzer.
    Click apply.
    Save.
    Done!

  • HR-ABAP Payroll-reports-interfaces-forms

    Hi everybody,
                     Please can any body send me the code for HR-ABAP  Payroll, time management  in case of REPORTS, Interfaces.
    I mean  to  get  coding fof retrievel of data from Payroll and Time Management modules.
    Waiting for reply.

    Hi,
    please go thorugh following links
    HR deals with the INFOTYPES which are similar to Tables in General ABAP.
    There are different ways of fetching data from these infotypes.
    There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
    Infotypes for these areas are different from one another area.
    storing of records data in each type of area is different
    LDBS like PNP are used in HR programing.
    Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
    and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
    On the whole Normal ABAP is different from HR abap.
    For Personal Admn the Infotypes start with PA0000 to PA1999
    Time Related Infotypes start with PA2000 to PA2999.
    Orgn related Infotypes start with HRP1000 to HRP1999.
    All custom developed infotypes stsrat with PA9000 onwards.
    In payroll processing we use Clusters like PCL1,2,3 and 4.
    Instead of Select query we use PROVIDE and ENDPROVIDE..
    You have to assign a Logical Database in the attributes PNP.
    Go through the SAp doc for HR programming and start doing.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/report%2bin%2bhr%2babap%2b(without%2bLDB)
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    Please check this link for HR sample programs.
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.sapfans.com/forums/viewtopic.php?p=498530&sid=d7ec5866e3fb26880da129de45ce79de
    http://www.sapcookbook.com/preview_hr_questions.htm
    http://www.atomhr.com/library_full.htm
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983590,00.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b74ce990-0201-0010-a595-8c1203c93e56
    http://www.planetsap.com/hr_abap_main_page.htm
    http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
    http://www.planetsap.com/HR_ABAP_LDB.htm
    http://help.sap.com/erp2005_ehp_02/helpdata/en/16/b8b83b5b831f3be10000000a114084/content.htm
    http://help.sap.com/saphelp_45b/helpdata/en/1e/728d281d5e11d289d30000e82158f1/content.htm
    http://diocio.wordpress.com/2007/04/27/sap-abap-insert-infotype-data-with-maintain-text/
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Info required on Report Report Interface

    Hi Experts ,
    Can anyone please provide inputs regarding the Report Report Interface . Any document will be highly appreciated.
    Regards
    Garima

    Hi Garima,
    Links ................
    http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
    https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=3353440
    https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=2762562
    https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=1846978
    https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=180080
    The steps to create RRI
    1)Goto T code RSBBS
    2)In the Sender Query -give the Query name
    3)Press Create tab which is there on the Right Top
    4)It will as for a list select the Query name in the Bottom
    5)and Press OK.
    6)Come back to the main Screen os RSBBS and Select the Receiver Query and click Assignments.
    7)Make them objects as Delete.
    8)Save and Execute the Query ,Sender Query.
    9)Right Click on the Query ,we will find GOTO Tab ,Drill down further
    we can view the Second Query.
    10)we can view the Second Query through first query
    Hope it Helps
    Get bak if u have any issues
    Rgds
    SVU

  • Report to report Interface issue in Web Analyzer

    Hi,
    Report to report interface for one of the queries works fine in Development ,Quality and Production systems through BEx Analyzer ,where as it shows the wrong values in receiver query when we try to use it through Web Analyzer of production.In production Bex Analyzer it works fine and even it works  fine in web analyzer of  Development and Quality systems and the issue is with RRI in Web Analyzer of  Production system only
                    Please help me to solve this issue.
    Thanks & Regards,
    Madhu.

    Hi ,
    Youi can check this tables
                        MKPF               material document
         MSEG               material document (item level)
                        RESB                                Material reservations
         RKPF                                 header
    Rergards
    SANIL

Maybe you are looking for

  • All users share the same iCal

    I want all the users on my iMac to share the same Calendar. How do I do it?

  • Payment Card Info for sale order with BAPI_BUSPROCESSND_CREATEMULTI

    hi all i am trying to create a sales order using BAPI_BUSPROCESSND_CREATEMULTI and i am able to create an order successfully without any problem. the order is being generated. I am trying to input the payment card details to the BAPI_BUSPROCESSND_CRE

  • First of the column and last of the column

    hi there, sorry if it is a repost, please redirect me if this topic has been discussed. thank you. my question is how do i get the first entry of the particular column and the last entry of the same column without calculating the number of row? as fo

  • HT1975 How can I track the location of my friends

    How to track the location of your friends using the iphone

  • ISR with WebDynpro

    Hi Experts, We are building a custom HR application to automate various HR processes like New Hire, Termination, etc.. Due to certain internal issues we are unable to use the standard business package for MSS (and hence PCR screens with adobe forms).