Report RPTARQPOST - Document status with error

Hi,
We are using report RPTARQPOST to post the leave requests to infotype 2001.
But we are having many records posted in infotype 2001, with the workflow status "Completed", but with the Document status "Error". What does that mean? What can cause this document status?
Thanks in advance for your help.
Best regards,
Sónia Gonçalves

Reports Server Queue Status is as follows
The report terminated with error:
REP-110: File Testbill.rdf cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File Testbill.rdf cannot be opened. .
By the way, i tried making the reports path length in registry very short as suggested by numerous people. But, nothing worked so far.

Similar Messages

Report: user/systems status with change details for a project

HI.
I am aware of CN41N/CN43N transaction.
Is there a way to pull a report for a project with system status, user status and the details of who made the changes with date and time???
thanka a lot in advance
Regards
SURYA

Hi
If you have change documents active for status management and project profile then you can get the data from JCDS table directly (changed status and who changed it). Note that you will get the status in SAP internal code and you need to refer TCJ30 table for status.

Report on documents posted with user name-urgent

Hi All
Is there any report available to find out the documents posted with user name on any one particular date.
This req. is for a audit purpose.
Thks & regards
nivi

Hi Hein
They dont want to use any query and generate report. There are billing issues. They are enquiring whether standard report or transaction code is there to track the same.
Anyway Thks for your inputs.
Thanks & Regards
nivi

Custom reports do not run with error message: Routine FDPREP cannot read ..

Hi
Can anybody help me with this issue pls?
The dev system is cloned from production a few days ago. After running the post clone procedure, the dev is working fine except when we are trying to run custom reports, it errorred out with error message - Routine FDPREP cannot read the file /fmis/11.5.0/reports/US/POXPRPO1.rep. I have checked the env files, and they seem ok. $CUSTOM_TOP is set to the correct value. Other standard Oracle reports are running properly. The custom report file extension is in low case (.rdf). I've even tried to compile the report manually by using rwcon60.sh, the rep file was created under that folder but concurrent manager is still giving the same error message. So I am suspecting whther it is the path issue, as from the error message we can see up there, it is not showing the absolute path. Can anyone pls shed some lights on this for me?
Thanks!
Liang

Hi hsawwan,
Echo $FMIS_TOP(Custom Top) returns /global/app/fdev/home/fdevapp/findevappl/fmis/11.5.0, which is the correct path.
Interesting thing is I checked the custom forms and they are working properly , our current configuration is form server and web server are sitting on one node, and CM, admin and database are sitting on the other node. So it seems it is the CM node settings caused the problem. However, I've just compared the APPSORA.env, customfindev_XXXXXX.env $FMIS_TOP (Custom Top) on the two nodes, and nothing seems out of ordinary.
Thanks,
Liang

Process chain Problem "Process Activate DSO,ZDSO_01 has status with error"

hi,
i have found the problem of activation of ODS .
problem is something like
" Request REQU_49K5C78KK17M6JTUD3Y773YXC(3,860) has not or not correctly been updated; Please edit"
"Activation of M records from DataStore object ZDSO_01 terminated"
"Process Activate DataStore Object Data, variant Aktiviere Daten ZDSO_01 has status Ended with errors (instance ODSA_49K5E1DRU05C
Please reply me as soon as possible.

Hi Viral,
Delete ur requests and try to laod them again.
Try to find the detailed error message which u can find the process monitor --> Status page --> step by step analysis.
So that you can get more information regarding ur error.
Regards,
Rajkandula

Collective Billing doc./online stops if a delivery document saves with error

Dear Gurus
We will save the billing documents using VF04 (Maintain Billing Due list) by selecting all the delivery documents and will click on "Collective Billing Doc. /Online'. Sometimes, if a single delivery documents was incomplete or saved with error, system stops the execution at the error delivery document. Again we will exclude the error delivery document and tries to select the remaining documents. We will repeat it till all documents cleared (except the error Document).
Is there any option, where we can successfully execute all the documents with excluding the error delivery documents. That means, system should save all the billing documents without stopping at the error document. This will helps us to minimize our time. Suggest us a solution.
Regards
Maheshwar Rao Gudepu

Normally, for any reason, if billing documents cannot be generated, it could be due to incompletion log exists in sale order and not in delivery. So in all probabilities, wherever system has stopped generation of billing document, if you check the corresponding sale order, it would have been saved with incompletion log. So before executing VF04, user has to educate to check this. On the other hand, if you want to automate this process, you can try with USEREXIT_FILL_VBRK_VBRP in program RV60AFZC
G. Lakshmipathi

DMS - Reports for documents marked with deltion indicator

Hello Guys,
Kindly let me know is there any standard reports available from sap which can highlight me the list of documents that are marked with deletion indicator.
If not whats the work around for that?
Also adding to deletion indicator, I would like to capture the reason for deletion of original from document info record? But I found there is no specific place to capture the reason for document deletion.
Kindly help me out
Points will be awarded for sure.
Regards,
Murali.S

Dear Fapreeth,
For getting the list of document marked with deletion indicator you can goto Tcode "cv04n" there keep all other searching criteria empty just specify criteria for <b>deletion indicator</b> as "X W. Del.Ind." you can use <F4> to select that value.... than execute the search and you will receive list of documents with active deletion indicator...
Regards,
Tushar Dave

Reporting Services Point status message errors.

My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?

Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

[11g] Report won't print with error 50003

Hi,
I have one report that works, the other not,
here are the URL
FCRRP004
http://20.33.68.208:8090/reports/rwservlet
?server=fnacserver
&report=FCRRP004.rdf
&userid=JBM/784564@onzeg
&p_servername=fnacserver
&P_REP_NM=FCRRP004.rdf
&p_user_connect=JBM/784564@onzeg
&DIV_MODNAME=FCRRP004
&DIV_SITE=01
&DIV_DEPOSANT=01
&P_ACTION=/reports/rwservlet?
&paramform=yes
FCRRP089
http://20.33.68.208:8090/reports/rwservlet
?server=fnacserver
&report=FCRRP089.rdf
&userid=JBM/784564@onzeg
&p_servername=fnacserver
&P_REP_NM=FCRRP089.rdf
&p_user_connect=JBM/784564@onzeg
&DIV_MODNAME=FCRRP089
&DIV_SITE=01
&DIV_DEPOSANT=01
&P_ACTION=/reports/rwservlet?
&paramform=yes
I have checked both in Report Builder 11G, I cannot find the problem.
Here is the beginning of the error message:
REP-50003: The parameter value is invalid: pfaction=http://20.33.68.208:8090....
Many thanks if you can help or tell me where to find the Oracle Documentation on Reports 11g Errors.

Hi
We have a Report launcher Forms module that populates an url_variable then calls it with WEB.SHOW_DOCUMENT:
http://11.11.11.11:8090/reports/rwservlet?server=myr&report=FCRRP089.rdf&userid=JBM/784564@onzeg&p_servername=myserverr&P_REP_NM=FCRRP089.rdf&p_user_connect=JBM/784564@onzeg&DIV_MODNAME=FCRRP089&DIV_SITE=01&DIV_DEPOSANT=01&P_ACTION=/reports/rwservlet?&paramform=yes
Here is the response after I submit the URL
REP-50003: The parameter value is invalid: pfaction=http:/11.11.11.11:8090/reports/rwservlet?_hidden_server=myserver
&report=FCRRP089.rdf&userid=JBM%2F784564%40onzeg&p_servername=myserver&P_REP_NM=FCRRP089.rdf
&p_user_connect=JBM%2F784564%40onzeg&DIV_MODNAME=FCRRP089&DIV_SITE=01&DIV_DEPOSANT=01
&P_ACTION=%2Freports%2Frwservlet%3F&paramform=yes.
The same mechanism works URL works with 50 others reports

Disk utility reports failing hard drive with error code STF/8/3:2 ATA BUS 0

My imac G5 (running Tiger) suddenly decided not to boot past the grey apple screen with the spinning wheel. I ran the disk utility and received error code STF/8/3:2 ATA BUS 0 MASTER on the mass storage test. I tried to run repair and only received a message "fatal hard drive error etc... back up, recover asap... I could not access the disk so I connected my new MacBook Pro by firewire in target disk mode. My HD shows up however, "nothing" shows up under when my "user" file. All I care about saving is my iphoto library. Everything else is trivial. Can someone Please help me? Is there any way I will be able to save this file?
Message was edited by: Elizabeth Burson

Welcome to Discussions - you can try DiskWarrior and see if it can retrieve some of your data. You can also take it in to Apple with an external fire wire drive you have purchased elsewhere (cheaper) and see if they can transfer the data. You can then install the external into your computer.

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Report ending in warning with status 127 error

Hi,
We ran a concurrent report with Print options set for a custom report.
The report is ending in warning with the below error:
------------- 1) PRINT   -------------
Printing output file.
Request ID : 356879180
Number of copies : 1
Printer : ABSC_5WCC_HP9
/bin/sh: jforasnd: not found.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 127
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 127.
Action: Review your concurrent request log file for more detailed information.
Please suggest how to overcome this error.
Regards
Siva G

Please see your other thread -- Re: Concurrent report ending in warning with status 127 (post upgrade to R12.1.

Purchase Price Variance Report completes with error status

Dear Members,
I am using R12.1.3 Vision Instance.
When I ran the report Purchase Price Variance Report, it completed with an error.
The error message is :-
Enter Password:
REP-1212: Object 'F_h_report_date' is not fully enclosed by its enclosing object 'Body'.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1212: Object 'F_h_report_date' is not fully enclosed by its enclosing object 'Body'.
Can any one please guide me in resolving this issue?
Many thanks in advance.
Regards.

HI,
Check the below references, it would address your issue
Purchase Price Variance (Xml) Post Process Failed [ID 1341213.1]
Report Error Rep-1212: Object 'F_report_date' [ID 567886.1]
Regards,
Ivruksha

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

Stock variance report Crashes with error code REP-56048

SR : 6990718.992
gtcr : http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=6990718.992
Problem Statement : When the user is trying to generate report for Stock variance report from Oracle Retail Merchandising System the report crashes with error code REP-56048.
The steps to reproduce are specific to Oracle Retail Merchandising system application and hence I have not mentioned here.
The REP-56048 error seems to be generic. Could you please advise me on this issue.
Thanks & Regards,
Sameer

You can review the following Oracle Metalink Document;
Comprehensive REP-56048 Troubleshooting and Overview Guide: Doc ID: Note:285281.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:88153902823984055::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,285281.1,1,1,1,helvetica
Hope it would be useful.
Adith

Report RPTARQPOST - Document status with error

Similar Messages

Maybe you are looking for