Report RSUSR200 having problems

Hi All,
We are seeing incorrect results in RSUSR200/SUIM when looking for inactive users (users who have not logged on >90 days).
For example, a user logs in daily but the report RSUSR200 show that user as inactive. Like this we got couple of emails which cause me to wonder is RSUSR200 is correct or not.
Please let me know if anyone faced this bug in report RSUSR200 and how they resolved it ?
Regard's

Salman,
1. Is USR02 table more reliable than report RSUSR200/SUIM ?
In my view RSUSR200 / USR02 is more reliable, Not SUIM
Users Valid Today
Users Not Locked ; Users Locked
Users with no incorrect Logon attempts
Dialog Users
Users with Productive password
Users with initial Password
users with deactivated password
2. If not USR02 then how should I make a test case in QA and debug report RSUSR200 in QA or Dev with a developer ?
I better suggest ask ABAP devloper to do debug. If you know the steps for debugging then you can proceed, But you need to have access to se38 ...
Still facing problem, as suggested by Ben raise a ticket with SAP.
Thanks,
Sri

Similar Messages

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

WebElements - Having problems putting CR report in WECollapsibleSection

Hi there -
The user doc indicates putting a WEcontrol in a collaspible section is possible - I am trying to put a CR report in the section and am having problems.
Here's my code:
WECollapsibleSection (ElementName, {@WE_OppListRiskReport}, OpenText, CloseText, Font, SectionWidth, SectionHeight)
where {@WE_OppListRiskReport} is
stringvar targetpath :=WETargetPath ("rpt","CUID" ,{@WE_OppListRiskPullCUID},"");
(i've also tried other permutations of the placement of WETargetPath)...
When I run my report with the collapsible section and click on the OpenText Link, the section appears, but what appears in it is the Opendoc URL:
/OpenDocument/opendoc/openDocument.jsp?sType=rpt&sIDType=CUID&iDocID=ASHjBo78IzxEj_yzCRYc6uc
I have used the target path to the same CR report in an iFrame and the report displays correctly so I know it can find the report correctly.
Help!
thanks!
Pam
PS. Just into a week of using WE and loving it!!

Hi Jamie -
I have already encountered issues after I accidentlally copied/pasted code and left 2 physical webelements with the same name.    (hey! why is that report loading in that frame??)   That wasn't the issue here, but your response made me go through my code with a fine tooth comb to verify that I hadn't done that.
While I was double checking, I did some more experimenting and debugging. This led me to an interesting discovery.
As a reminder, I am trying to 'load' crystal reports into iframes onto a Main 'portal' report. My main report has iframes, collaspible sections, editbox controls and a flyout section with 5 elements. Loading a report into a frame works fine for the 'independent ' iframes that are placed directly on my main report.   The expected report also loaded on the 'top' element of the FlyoutSection control. (When I say 'works fine', I mean that the reports loaded into their respective iFrame controls when I open the Main 'portal' report)
The 2 controls that I was having issues with were the CollapsibleSection and the FlyoutSections (all but the top element.) .
In each case, I had defined iframes and targeted the iframes with Cystal reports within these controls. When my main report loaded and I clicked on the 'Show Report' link to open the CollaspibleSection, I could see the outline of the iframe but within it, was the never ending 'please wait ' window. The report just never loaded. I experienced the same thing when I put an iframe on the 2nd 'section' of a FlyoutSection control.   I knew that my code was correct because if I pulled the iframe code out of the control and put it directly on my Main 'portal' report, it worked like a charm.
To me, it seemed as if, despite the 'please wait' message, the iframe was NOT loading the report.   I was never prompted for parameters and the DB showed no I/O hits to indicate the report was hanging due to performance.      So just for the hell of it, I put a submit button within the content of the FlyoutSectionControl's second section (along with the existing iframe). All the submit button did was force the report to be loaded into the same iFrame that was already there. And, to my surprise, after pressing the button, the report loaded.
I tried adding a submit button to the collaspible section as well and that seemed to force the report to load as well.
Of course, this is really clugey. My expectations are that when I click on the FlyingSectionControl's element headers, the reports wherein would load and, if I click on 'show report', the report will load as the collaspiblesection expands. I think users will also have the same expections. It's seems unnecessarily redundant to have a 'Show report' link open up and then the user have to click a button that says 'Do you really want to see the report' before the report will load.
Fundamentally, these 2 controls differ from others because you need to 'click' on them to change their state. Perhaps this 'click' is interfering with the report loading into the iframe?
I'd love an explanation and also your input into how these controls could be 'preloaded' .
thanks!
-Pam
Here's the code for my collaspible section (that finally worked) - the only difference from the prior version is the addition of the WeSubmit(btn) function:
stringvar item1:= WETargetPath ("rpt", "CUID", {@CUID_chart}, "weIframe=iframe5" );
stringvar OpenText:= "Show Chart";
stringvar CloseText:= "HideChart";
stringvar SectionWidth:= "3in";
stringvar SectionHeight:= "2cm";
stringvar insideframe :=WEIFrame ("iframe5", "item1", 400, 200, "yes") ; <==if I leave out the target path here, the frame shows up empty at first (which is neater than seeing the 'please wait' message box))
stringvar SectionElements:=   WESubmit("chartbtn","Button", "see chart",item1 , font)
+ WEBreak (2)+ insideframe;
stringvar collaspiblegroup := WECollapsibleSection (ElementName, SectionElements, OpenText, CloseText, Font, SectionWidth, SectionHeight);
collaspiblegroup + WEBuilder(collaspiblegroup,2);

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

I having problem in XL Reporter

Hi all
i having problem in XL Reporter is that
in report compose i have selecte two fields from BP tab, one BP and contact person
if i generate , it ask file name "bp1" in action edit definition, checked use exel temple
then i entered OK
following error displayed
"A required COM add-in program for XL Reporter has not been loaded and prohibits Microsoft Excel from running"
Please guide , how to solve this
Prasad

Read the following solution from SAP for your problem;
When we open XL Reporter we get an error
message "A required COM add-in program for XL Reporter has not been loaded
and prohibits Microsoft Excel from running." when trying to open a report
definition.
SOLUTION FOR THE PROBLEM:
Reason and Prerequisites
You need to be an administrator on the local machine to add COM add-ins.
Solution
The user should be added as a member of the administrator role on the
local computer the first time you start Excel from XL Reporter the first
time so that the COM addin are registered, then you can remove the user
from the administrator group again.
Manually Loading the XL Reporter Excel COM Add-In
Symptom
If you install Microsoft Office after installing the XL Reporter
application or use another Windows user than the one you used when
installing XL Reporter, you can get an error message.
Reason and Prerequisites
The reason for this is that the report writer COM Add-in has not been
loaded, which prohibits Microsoft Excel from running.
Solution
1. Start Microsoft Excel. If you already have the COM Add-ins command on
the Tools menu, go to step 7.
2. In the Tools menu, choose Customize.
This opens the Customize window.
3. Choose the Commands tab and select Tools from the Categories pane on
the left.
4. In the Command pane on the right, scroll down to the COM Add-ins
command.
5. Select the COM Add-ins command, hold down the mouse button, and drag
COM Add-ins from the Commands pane over to the Tools menu on the Microsoft
Excel men bar. When the Tools menu commands appear, point to where you
want the COM Add-ins command to appear on the menu and release the mouse
button.
6. To close the Customize window, choose Close.
7. On the Tools menu, choose the new COM Add-ins option.
This opens the COM Add-ins window.
8. In the window, choose Add to open the Add Add-in window.
9.Select the IXXLReporter.dll file located in the Client directory in the
XL Reporter program installation area and choose OK.
10. In the COM Add-ins window, select the XL Reporter checkbox and choose
OK.

HT1933 I have been charged for downloading Indira Budiman from itunes multiple times, how to report to itunes? Is anybody else also having problems like this? And also need to know how to block them from charging again?

I have been charged for downloading Indira Budiman from itunes multiple times, how to report to itunes? Is anybody else also having problems like this? And also need to know how to block them from charging again?

I don't know who/what Indira Budiman is, but you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's an app then does it allow you to make in-app purchases within it ? If it does then you can turn off in-app purchases via Settings > General > Restrictions on your device.

Report query parsing problem

I didn't find any report of this problem...
Using APEX 3.0.1.00.07, I have a report of type "SQL Query (PL/SQL function body returning SQL query)" with the "Use Generic Column Names (parse query at runtime only)" radio button selected.
When the region source contains the string "ORDER BY" in any form that I've tried (even in a comment), attempting to save the region fails with "Your query can't include an "ORDER BY" clause when having column heading sorting enabled."
I do indeed have column sorting enabled on certain columns, but I don't see how that is relevant under these circumstances since the query produced at runtime does not have an ORDER BY clause.
Am I overlooking something or is this a parsing problem?
Rodney

Rodney,
It's just checking for order by being included in your query, and if so and you have column heading sorting enabled, it's raising this error because you can't have both (even if it's commented out).
Regards,
Marc

Report server run problem (urgent plz)

i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin

Alv report Print out Problem

Hi Experts,
I am having problem while taking print out of Alv report format. In that report, 1 column contains Unit Values.
Eg. Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU' which is finally displayed in the Alv -Report display format.
while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format "****'.
Please give me your Valuable Suggestions.
Thanks and Regards
BalaNarasimman M

while defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya

The answer why Best Buy and other places are having problems...

Blame LG Display. Looks like the Retina Display is having problems in production.
http://news.cnet.com/8301-13924_3-20008149-64.html?part=rss&tag=feed&subj=iPhoneAtlas
"The shortage of iPhone 4s as launch day approaches is due to limited supplies of the new Retina display, according to an industry analyst's report. CNET quotes Ashok Kumar, managing director and senior technology analyst at Rodman & Renshaw, as saying that a "production bottleneck" in the IPS LCD screen may continue to late summer. Meanwhile, customers continue to report emails from AT&T telling them that their iPhone 4 pre-orders have been canceled.
In the snowballing EPIC FAIL that is the iPhone 4 rollout, there has been a lot of blame to go around. Server issues were responsible for delay and confusion when the new iPhone first went on sale last Tuesday, and AT&T stopped taking orders early Wednesday due to overwhelming demand. As the rush continued, black iPhones were no longer available for launch day, with ship dates pushed back first to July 2nd and then to July 14th. White iPhones are reported to be delayed to later this summer or even to 2011. It's unclear how long third party retailers will have to wait for supplies, as neither RadioShack nor Best Buy is saying when they will have iPhone 4s in stock. An AT&T rep told a MMi user that Best Buy will not have any iPhones by launch day.
Kumar wrote in a letter to his clients that his "supply chain checks indicate that our earlier monthly shipment estimate of 4 million units have been reset by about half," blaming difficulty with the LCD manufacturing at LG Display, which makes the Retina display for Apple. By late summer, according to Kumar, LG will have upgraded their plants to new fifth-generation technology that will allow them to cut more screens from larger panels.
Apple will probably do fine if they can get supplies up in a few weeks: many if not most of the people who have placed pre-orders will want an iPhone 4 and onlyan iPhone 4. If shortages continue, though, expect increasing numbers of potential iPhone buyers to start looking at other high-end smartphones like the HTC EVO and the upcoming Droid X."
-ModMyi.com

Which is why, as I stated in a previous thread, that Apple should have had on-hand a minimum of 3 million units before even announcing the darn thing and the so-called "pre-order" window should have been open for a month. That would have given them time to move the existing units and be producing more. I love Apple, but what kind of amateur-hour-fisher-price-my-first-product-launch has a one week pre-order window before launch without having a clue as to how many units they would move on launch?

TS3212 Is anyone else having problems loading the newest version of iTunes (10.6.3) on Windows?

Is anyone having problems loading the newest version of iTunes (10.6.3) using Windows Vista? My current iTunes program version 10.6.1 keeps telling me there is an update but when I try to load it the information box goes away and nothing happens. I have tried downloading the new version from Apple web site but it brings up a warning screen of " iTunes setup.exe is not commonly downloaded and could harm your computer." I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application." What Gives?

I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
Skip

I am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
   My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
   2014-11-13 QuickLookSatellite crash x2
   2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
   Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
   Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
   Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
   Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
   Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
   Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
   Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
   Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
   Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
   Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
   Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
   Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
   Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
   Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
   Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
   Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
   Dec 1 20:08:30 jnl: disk3s2: journal replay done.
   Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
   Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
   Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
   Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
   Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
   com.cisco.kext.acsock (1.1.0)
   com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
   com.cisco.anyconnect.vpnagentd
   com.oracle.java.JavaUpdateHelper
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.wdc.WDSmartWareService
   com.oracle.java.Helper-Tool
   com.adobe.fpsaud
   com.wdc.SmartwareDriveService
Agents
   com.adobe.AdobeCreativeCloud
   com.zimbra.desktop
   com.citrix.ServiceRecords
   com.google.keystone.system.agent
   com.apple.photostream-agent
   com.genieo.completer.download
   com.genieo.completer.update
   com.cisco.anyconnect.gui
   com.citrix.ReceiverHelper
   com.citrix.AuthManager_Mac
   com.citrix.FMDAgent.14800.UUID
   com.oracle.java.Java-Updater
   com.fiplab.MailTabProHelper
   com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
   com.citrixonline.GoToMeeting.G2MUpdate
   com.apple.AirPortBaseStationAgent
   com.microsoft.SyncServicesAgent
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/hp_fax_io.kext
   - com.hp.kext.hp-fax-io
   /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
   - com.hp.print.hpio.Inkjet1.kext
   /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
   - com.hp.print.hpio.Inkjet4.kext
   /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
   - com.hp.print.hpio.inkjet8.kext
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/WD1394_64_109HPDriver.kext
   - com.wdc.driver.1394.64.10.9
   /System/Library/Extensions/WDUSB_64_109HPDriver.kext
   - com.wdc.driver.USB.64.10.9
   /Library/Extensions/hp_io_printerclassdriver_enabler.kext
   - com.hp.hpio.hp-io-printerclassdriver-enabler
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
   - com.citrix.citrixicaclientplugIn
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/npg.plugin
   - npg.graphon.com
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/SlingPlayer.plugin
   - com.slingmedia.slingplayer.plugin.nspapi
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/FMDSysPrefPane.prefPane
   - Citrix.FMDSysPrefPane
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
   - com.westerndigital.quickview.prefpanel
   /Library/PreferencePanes/Zimbra.prefPane
   - com.zimbra.prefpanel
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Internet Plug-Ins/WebEx.plugin
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx64.plugin
   - com.cisco_webex.plugin.gpc64
dylibs
   /usr/lib/libaudioc.dylib
   /usr/lib/libclipc.dylib
   /usr/lib/libcs.dylib
   /usr/lib/libdc.dylib
   /usr/lib/libfilec.dylib
   /usr/lib/libMonoPosixHelper.dylib
   /usr/lib/libpbr.dylib
   /usr/lib/libprintc.dylib
   /usr/lib/libsc.dylib
   /usr/lib/libSFFileMonitor.32.dylib
   /usr/lib/libSFIPC.32.dylib
   /usr/lib/libSFIPC.I.dylib
   /usr/lib/libSFsqlite3.7.4.dylib
   /usr/lib/libSFSyncEngine.I.dylib
   /usr/lib/libupc.dylib
App extensions
   it.bloop.airmail.beta10.Airmail-Today-Beta
   it.bloop.airmail.beta10.Airmail-Composer-Beta
   com.wunderkinder.wunderlistdesktop.sharingextension
   com.wunderkinder.wunderlistdesktop.todayextension
   com.readitlater.PocketMac.AddToPocketShareExtension
   com.stylemac.instadesk.Photodesk-Feed
   it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
   /Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/opt/cisco/anyconnect/gui_keepalive</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.cisco.anyconnect.gui</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>open</string>
    <string>--wait-apps</string>
    <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>57</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
   http://www.apple.com/DTDs/PropertyList-1.0.dtd >
   <plist version="1.0">
   <dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.vpnagentd</string>
        <key>ProgramArguments</key>
        <array>
             <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
             <string>-execv_instance</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>EnableTransactions</key>
        <false/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.SmartwareDriveService</string>
    <key>Program</key>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.WDSmartWareService</string>
   
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.download</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>download</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Downloads</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.update</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>update</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>StartInterval</key>
    <integer>86400</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.microsoft.SyncServicesAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
           <key>Label</key>
           <string>com.zimbra.desktop</string>
           <key>ProgramArguments</key>
           <array>
                   <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                   <string>start</string>
                   <string>-w</string>
           </array>

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Having problem with the printer with type "PDF Publisher"

Hi,
We are having problem with printing PDF reports with print style as "PDF Publishrer". The concurrent program errors out after it generates the report. But when we try that with style "PORTRAIT" then it prints successfully. We have tried with a number of printers and a number of reports. The results are same. So my understanding is it has something to do with the printer configuration from the EBS side.
Any help in this regard is highly appreciated.
Pratap

Hi Hussein ,
Thanks for the response. The details are provided below.
The application is R12.1, Database 11.1.0.7, OS is Solaris 10.
The database characterset is US7ASCII.
The printer type is --PASTA Universal Printer Type
The log file does not give any error but the program completes with error. I am coping the log file below.
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RAXINV_SEL module: Invoice Print Selected Invoices
Current system time is 20-JUN-2011 14:23:10
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='10100'
p_trx_number_high='10100'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 96
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10100
MSG-00010: 14:23 1 Transaction: 10100
Report Builder: Release 10.1.2.3.0 - Production on Mon Jun 20 14:23:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 895365 on node PAUPRJ01 at 20-JUN-2011 14:23:48.
Post-processing of request 895365 completed at 20-JUN-2011 14:23:51.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 895365
Number of copies : 1
Printer : SPOT
##################################################################

Report RSUSR200 having problems

Similar Messages

Maybe you are looking for