Report RSXMB_RESTART_MESSAGES needs a lot of resources

Hi,
we are using PI 7, SPS9.
When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
In the queues I can see a lot of entries made by the report.
Our report still have the field "max restarts" and I entered 5 restarts!
What can I do?
Thanks a lot!
regards
Wolfgang Hummel

Hi Sandro,
thanx for your answer.
This is a test system and at the moment I just defined jobs for deleting and not for archiving.
My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
regards
wolfgang

Similar Messages

Does Task Scheduling use a lot of resources?

This is a curiosity question.
Instinctive I would say that task scheduling must use a lot of resources. Every fraction of a second the system must check the Task Schedule.
Does Task Scheduling use a lot of resources?

No it does not.
Windows uses task scheduling all the time without any impact on performance.
it is hard to find conceptual information on this, but it appears to me task scheduler does not check if there are possibly tasks that need to be executed each few miliseconds. Instead it sounds more logic taks scheduler waits for an interrupt to get
notified when conditions are met.
Think of it the other way around: mouse and keyboard also do not require much resources, allthough windows continuously needs to know whether a key is pressed or the mouse has moved. that is handled by interrupts. Aside of that, making a lookup (like checking
the current system time) does not use a lot of cpu time (even not miliseconds), given the fact modern cpu's do billions of operations per second (http://en.wikipedia.org/wiki/Instructions_per_second)
MCP/MCSA/MCTS/MCITP

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??

hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd

If I'll use project performance reporting I need setup PJI before?

Hi all,
If I'll use project performance reporting I need setup PJI before? or no need? Please advice me.
Additional Information : I use module PJC and PJT in 12i
Many Thanks.

Hi Govind,
Thank you for your information and you are correct. :)
I found this document that explain about PPR and I try to set it, It's work!
Document Name that explain about setup PPR --:
- How To Get Data In Performance Reporting For Linked Projects To Program.
- Whilepaper_PPR_Solutions
- Project Performance Concurrent Requests - Overview and FAQ

In Adobe ExportPDF, can you take an existing PDF and delete existing pages? For example, I have a 5-page report and need to delete pages 2-4. Is this possible? Thanks!

In Adobe ExportPDF, can you take an existing PDF and delete existing pages? For example, I have a 5-page report and need to delete pages 2-4. Is this possible? Thanks!

Hi,
You can do this with Adobe Acrobat.
If you are using Export PDF it is a long procedure.
You need to convert your PDF in word or powerpoint.
Then you can edit the document & again can create PDF.
Regards,
Florence

I had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded..., i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded... I need a lot of help please.

i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please

Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

You can't install them separately, but it is easy to place unique shortcuts on the desktop for organizer and for editor.
In Organizer, go to Edit>Preferences>Auto Analyzer options and uncheck analyzer and people recognition if you don't use them - may improve resource utilization.

What will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports

what will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports. I also want to know the tables involved

Hi Andrew,
Part A:
I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
Field List:
Priority: Popup menu with six items: 00, J, D, 1, 2, 3 Defaults to 00
TL (time limit in months): Calculation: CHOOSE('Priority',0,1,3,4,6,12)
Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
Target Date: Calculation:
DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
Remaining (Days): Calculation: INT('Target Date'+1-NOW()) (see revision below)
Completed: Checkbox. Set default value to Unchecked.
Completed Date: Date: Entered manually
OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
Rsults (and some further formatting of the Layout) below.
Part B:
You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
Regards,
Barry

Aperture 3 needs a lot, lot, lot of space ;)

As you can see sometimes Aperture needs a lot of space, to do just update. Can you imagine how much space it will need for whole backup?
+PS: Library size is around 70GB+

I'm getting exactly the same message now - were you able to backup eventually?

Archiving with EOS, need to configure the resource files

We are using RSD EOS for archiving. Now we got a request from a client to configure resource files for some of his new spools.
If anyone is still using this product, need help on the resource file configuration.
Any help is highly appreciated.

GaneshDevadhe wrote:
How can I retrieve the information of rman backup details?
Hello,
If you intend to get Backup détails with Oracle Enterprise Manager, the link bellow may help you:
http://docs.oracle.com/cd/E11882_01/server.112/e10897/backrest.htm#BHAHGCGE
Else, you can also do it in command line from the Server housing the Database:
rman
connect target /
list backup summary;
Hope this help,
Best regards,
Jean-Valentin Lubiez

ICloud email needs a lot of work

Does anyone know if/where Apple has a place to report bugs with iCloud.com apps?
The email app is pretty unstable. Most of the time, searching doesn't work at all. It just spins for a while and then tells me that it can't complete it right now. Most of the time, composing new messages doesn't allow me to attach anything to the message. Just throws up a weird error. Sometimes attachments work just fine. There's almost no rhyme or reason to it.
And finally, the iCloud.com mail app itself is incredibly slow.
Definitely a lot of work needed. Earthlink's email client was better 5 years ago.
Sean

i think things will be better tomorrow. Tomorrow is IP6 Day.

Problem: db link consume a lots of resources.

We have two production database for different purposes.
Same of our application use others database.
We are using Oracle Forms and reports prelimary database technology.
We are using DB link to integrate some of our application
Links consume a lost of resources.
We are using ORacle 10.1.2.2 each of our side.
We have 300 session because of links at both side.
We want to decrese this number.
How can we decrease links memory and CPU consumption.
İs there any alternative to use link in Oracle forms environment .
Thanks a lot.

I changed my message according to your recommendations.
maybe now anyone can give some recommendation to us ?
We have two production database for different purposes.
Same of our application use others database.
We are using Oracle Forms and reports prelimary database technology.
We are using DB link to integrate some of our application
Links consume a lost of resources.
We are using ORacle 10.1.2.2 each of our side.
We have 300 session because of links at both side.
We want to decrese this number.
How can we decrease links memory and CPU consumption.
İs there any alternative to use link in Oracle forms environment .
Thanks a lot.

Need a lot of custom JComponents, but Java just too 'slow', other Solution?

Hi folks,
first of all i'll try to explain my problem (although my english is quite bad)
We're programming a tool for visualising graph algorithms (df search, strong connected components, transitive reduction etc.) For that, we got a drawing area (derived from JLayeredPane) which contains the Nodes and the Edges of a graph (for all that don't know what a graphs is, just imagine these nodes as numbered circles, and the edges as directed lines from one node to another).
Both parts (Nodes and Edges) are derived from JComponent, because a) need MouseEvents on these Components and b) we need the ability to add them to a container (like JLayeredPane)
An absolute requirement is that you can directly click on the edges (to mark them, or delete them etc)
Another point which needs to be mentioned, the edges maintain a (invisible) polygon which lies around their line, this polygon is sensitive for mouseEvents.
Now there are two main problems:
* all these edges have (due to JComponent) (possibly) huge invisible rectangles (the only thing that really matters is the line from one corner of this rect. to the other) ...so if i got lets say a graph with 10.000 edges, there are a lot of edges that overlap (nearly 10.000 :) ) ... but only the Edge-object on top receives the MouseEvent (but perhaps the user wanted to cklick a edge that lies below the top-edge!) .. at the moment, the program looks at all edges below that which received the MouseEvent and checks wether the 'mouse'click' hits a polygon, If it does, the top edge dispatches the MouseEvent to that edge. (furthermore, due to the depth-order in a Layer of a JLayeredPane, we only need to look at all edges that are really below the egde that received the mouseEvent)
This all works great for 'small' numbers of edges (approximately 1000-2000) but with a rising number of edges this attempt gets slower and slower (it takes 1-3 seconds to evaluate a single mouseclick on a Sun Ultra 5/333)
* the bigger problem is, that if i got 10k+ JComponents in a Container Java gets really slow, just adding these 10k JComps. (to the JLayeredPane) takes some minutes?! Furthermore java consumes up to 200+ MB main memory in this situation.
One solution we are currently thinking about is to implement these edges as 'pure graphics'-objects (for example the Container just draws all edges).. this probably solves problem # 2 but # 1 gets even worse (no depth-order, some more coordinates hassle)
So, i hope someone can give me a hint for this problem or someone has had a similar problem before and has a good solution? (if the problem isnt clear, just ask)

I worked on an application once that had a similar structure as yours, but we were only scaling up to about 1000-2000 components. The problem that we identified (and that you have, no doubt, also identified) is that you are searching all of the child components on every hit test/overlap test. What we did was to subdivide out outermost container so that it had a couple of dozen children, each of which then parented some of the original child components: this cut our search space for every hit test dramatically. We had the advantage of having collections of child componenents that we knew would not overlap so our first level containers did not overlap -- you may need your first level containers to overlap, but even with this, you'll still be able to much more quickly identify components in the immediate region that should be checked individuall.

Purchase order report -help needed.

Hi guys,
Can anyone help me create a report for the purchase orders (similar to ME2N) ,my company needs all the info related to a PO like payment history.we need to pull all <b>closed POs</b> during a certain time period.Is ther a way todo this .
I'd appreciate your help.'
Thanks
Cheris T

Hello,
You will need to run both ME80N and FBL1N. ME80FN can display PO history and from FBL1N you can get payment history.
Hope this helps !
Cheers !

Report RSXMB_RESTART_MESSAGES needs a lot of resources

Similar Messages

Maybe you are looking for