Report RWVMIPAD not picking Sales Data

Hi ALL
I am executing a scenario for VMI(Vendor Managed Inventory) in which i am treating one client as Customer and the other as Vendor. In the customer client i want to send the current stock and the sales data to the vendor system for which i am using a report RWVMIPAD which gives only the current stock for the material under consideration. It however dos not give any detail of the sales data - i have already 2 sales order created.
Can you please let me know what additional setting needs to be done to have this data picked in the report.
Thanks
Regards
Sachin L Rao

hi
I am not sure about this point in vendor aging report. i have added a pur Organization field in this report.
I am asking
If vendor no 123 is in D100 and C100 ( D100 and C100 are Pur Organizations )
Initially no transaction is there.
Suppose vendor no 123 created a Puchase Order of 500 /- using D100 Purchase Organization in duration 01.01.2008
to 01.01.2009
But vendor no 123 in Purchase Organization C100 has no transaction.
Then 123 with D100 is sould show 500/-
and 123 with C100 is 0 /-.
output of this report should show above results ?
If output is like this then how to rectify my report ?
Or it shoud show the result like this
Then 123 with D100 is sould show 500/-
and 123 with C100 is 500 /-
My output is showing like above same
Thanks

Similar Messages

SD delivary report not pick up data from ship-to-party

Hi ABAPER,
I have a report which is pick up data from likp, lips,kna1.But when ever i execute this program it will display report.But in my report the ship-to-party and sold-to-party data will not display in my report. This report is open delivary report. Any one can give me solution.
Thanks in advance.
Regards,
Sourav

Hi Saurav,
from delivery select sales order
***Ship-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr1
                                   WHERE vbeln = sale order
                                     AND   posnr = order item
                                    AND   parvw = 'WE'.
***Bill-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr2
                                   WHERE vbeln = sale order
                                     AND   posnr = order item
                                    AND   parvw = 'RE'.
Regards
Srimanta

Change log report S_AHR_61016380 not picking IT0025

Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
Venkatesh

Dear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.

Webi does not pick correct Data

Hi Guys,
I have a webi. The Universe for the Webi is based on Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
I have checked following points already:-
1] No Resstriction at Query Level
2] No restriction at Universe Level
3] No Filters/ Restriction at Webi Level.
Can anyone suggest whats happening?
Regards

Hi Ray,
It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
This will give you the idea about aggregation.
Regards
Vineeta

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

Query is not picking the data from multiprovider

Hi All,
i have defined a query on a multiprovider which is made up of three ods one from sales orders, delivery, and billing but when i run the query ...its not picking up order quantity for some sales orders and also its not picking all the items available for that orders...but for some orders its picking up the order quantity but not delivery quantity...
order quantity is coming from sales orders ods and delivery quantity is coming form delivery ods, billing quantity is coming from billing ods...can somebody help me with a suggestion like what could be ther problem...
any sugestions will be highly appreciated.
with regards
harish

dear Harish,
multiprovider works as union,
you have order, delivery, billing, e.g the data like
order
orderno orditem customer product ordqty
ORD001 1       a        x        10
ORD001 2       a        y        20
ORD002 1       b        x        30
delivery
delvno delvitem customer product delvqty
DLV001 1       a        x        8
DLV002 1       b        x        25
billing
billno billitem customer product billqty
BIL001 1       a        x        8
multiprovider
orderno-orditem-delvno-delvitem-billno-billitem-customer- product-ordqty-delvqty-billqty
ORD001 1   blank blank blank blank    a        x        10 blank blank
ORD001 2   blank blank blank blank     a        y        20 blank blank
ORD002 1   blank blank blank blank    b        x        30 blank blank
blank blank DLV001 1 blank blank      a        x        8
blank blank DLV002 1 blank blank      b        x        blank 25 blank
blank blank blank blank BIL001 1       a        x        blank blank 8
what can you do is remove order no, order item, delivery no, delivery item, billing no, and billing item from query row area.
hope this helps.

KE30 is not picking the data from summarization level

Hi Techies,
We are facing one issue in KE30 tcode.
We are able to run the same report in our QLTY, its showing "Data is getting fetched the data from summarization level 33" and we can see the output within 5 mins, But if we use same parameters in PRO, its showing "Data is getting fetched from segment level".
So we are not getting data in PRO, its throwing TIME_OUT error....
Request you to suggest how we can map these summarization level to the particular report.
*We have already rebuilt and refreshed the summarization levels, then also it is being picked from segment level.
Thanks in advance,
NIck Loy

Hi,
In KE30 right click on the report. Click on change. Go to the options tab. In the performnace block check if radio button "use a summarization level" is selected.
If the customizing is correct then the select stamenet generated by the report may not be in sync with the summ level i.e. the chars in the selection of the report must be there in the summ level.
regards
Waman

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Report does not show updated data

Hi,
We are currently testing our AV implementation.
AV server, agent and collectors are up, but the reports are not being updated.
Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) were rebooted.
We can see collection is happening:
SQL> select max(av_time) from avsys.av$rads_flat;
MAX(AV_TIME)
19-JAN-10 12.34.41.150446 PM
But the dw table is not being updated:
SQL> select max(av_time) from avsys.audit_event_fact;
MAX(AV_TIME)
22-DEC-09 04.58.55.255456 PM
Does anybody have any idea?
thank you

hi Karun,
correction, there are a couple of trace files after the db was restarted prior to starting AV and the collectors.
below are the message content:
trace file #1)
Instance name: AVDB
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 24635, image: oracle@audit1
Dynamic strand is set to TRUE
Running with 2 shared and 48 private strand(s). Zero-copy redo is FALSE
trace file #2)
Instance name: AVDB
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 24922, image: oracle@audit1 (TNS V1-V3)
*** ACTION NAME:() 2010-01-19 14:39:46.215
*** MODULE NAME:(sqlplus@audit1 (TNS V1-V3)) 2010-01-19 14:39:46.215
*** SERVICE NAME:(SYS$USERS) 2010-01-19 14:39:46.215
*** SESSION ID:(213.1) 2010-01-19 14:39:46.215
kwqmnich: current time:: 22: 39: 46
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
what could this mean?
thank you!

Report RWVMIPAD not picking Sales Data

Similar Messages

Maybe you are looking for