Report S_ALR_87012000 Asset Register does not show correct values sums

Hi,
I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
1- the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990 - Asset history sheet
2- if I put an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
Could you explain me why? Is there some program bug?
Thanks in advance
Giovanna

Hi
If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
The execution for current year can have any date of the fiscal year for report execution
BR,Ajay M

Similar Messages

Discoverer Report opened from Portal does not show correct data

Hi,
When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
Does anyone know what the reason could be for this?
Thank you,
Santoshi

I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
Generally you specify the refresh time to be sometime after your usual database load completes.

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Report similar to MC$4 that does not show absolute values

Hi all,
We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
Thanks in advance!
George

HI
Your input criteria should contain all plant numbers and the period to be analyzed. Execute the report and then select: Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month. Follow the options to export to Excel. Report will be based on Plant, Storage location and Month.
Regards

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Site does not show correct on Samsung Tablet

Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
Larry

Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Change Password does not show Correct Error Message

Hi,
I am using a password policy which says that Characters not allowed are @&()|\";'<>+=/?. :}{][
When the user try tochange the password and try to put any of the above character,
then OIM Web console shows an Password Policy error, which is correct.
The Problem comes in when the Webconsole does not show the full range of the unsupported characters,it only shows the below error
Password Policy Error
The following password policy rules are not met:
Invalid Chars=/?. :}{][
Ideally it should have shown the full set of unsupported characters, which led the user to do the mistake again by selecting same old special charcter.
Although,the logs at the back end, shows full set of characters.
My Question ,is how could this be fixed,what customization has to be done if any ,for reflecting this change on WebConsole page.
Cheers
Ak

Hi,
I resolved the issue by changing the Characters not allowed to =@&()|\";'+/?. :}{][
instead of @&()|\";'+=/?. :}{][
What i figured out is all the charcters after = are only getting printed at the Web Console, so i reshuffle the charcters and put = in the beginning.
And it is working fine.....
Strange huh.....:)
Cheers
Ak

Safari does not show correct page

A friend of mine uses Safari, but it does not show the correct page. He tries to view http://www.ventanasalmar.biz. This is hosted as one of my 10 domains on my acount with a hosting company. He is for some reason redirected to my default account. When he uses Firefos from the same location, everything is OK. As I do not have the same program (Safari) myself, I cannot test. My friend is in the US, I am in Norway, so I cannot just pop over
Any suggestion about what could be wrong?
Windows XP

askim --
Welcome to Apple Discussions !
I tried on my Safari, and also on another browswer, Shiira.
Your site works great on both.
Your friend probably needs some housecleaning of his safari caches, etc.
Ask him to do these and try again:
1. Empty your cache & History settings via the Safari menu
2. Trash your Icons Folder:
HD>Users>Home>YourName>Library>Safari -->Icons
Restart Safari and a new folder will be automatically regenerated.
(This folder saves favicons of all the sites you visit. Needs cleaning periodically -- or you can change that file's preferences to "Read Only"
rather than "Read & Write." This will keep it from growing in size.)
3. Launch Font Book and check all fonts for duplicates. A duplicated font will have a bullet beside the font family and you can resolve duplicates by selecting the font and at the menu bar, go to Edit > Resolve Duplicates.
Do this for each font with a bullet next to it.
If he's still having problems:
4. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router first, let the lights set up right, and then restart your computer.
Hope this helps

Using transactio code to execute a report does not show default value

Hi all ,
I have given a default value of a field on my selection-screen by initialization in a hr report .
I am using PNP database and default selction-screen in hr report category .
While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
Can any body tell why it is so ?
Thanks & regards
Sun

Did you create the transaction as a report transaction?
Rob

Multicolumn does not show any value when I tried to put a value on column 4 or above

When I put a value in column 4 or above ( in any row ) multicolumn listbox doesn't show me any return. I got a example from NI forums and changed it to see if it works , but the results are the same.
Does anyone know about it. I'm using labview 2009 9.0f3
Thanks in advance

Can you link to the example you are using?
What is a "return" that it does not show? I am not familiar with these terms.
Why don't you attach a simplified version of your VI with steps to demonstrate the problem
LabVIEW Champion . Do more with less code and in less time .

Report S_ALR_87011964 Asset balances does not match AW01N

In march 08, useful life of one asset is reduced to 4.4 years
effective Mar 08.
Accordingly - system has revised Plan Deprn figures from march 08 to
through Dec 08 & planned book value is nil as at Dec
08(These calculationa are perfect).
Then Deprn run was executed for first quarter of 2008(Calender Year).
For this asset, Deprn posted was 19007.41 (5001.95(Jan)+5001.95(Feb)
+9003.52(Mar) & this amount matches with GL as well as Asset values in
AS03(aw01n).
Now issue is when we run report s_alr_87011964(with Current book value)
as at report date 03/31/08(Mar 08) - it returns Acq value 300117.10 & Acc deprn
200078.06 & book value 100039.04(these values are as at 01/01/08) - hence it is not taking the Deprn
figures of year 2008 - however for all other assets - this report
displays perfect info & matches with GL & AW01N.
When we run this report with Report date 05/31/08(may 08) or later - it gives
correct value.
Kindly advise as to why Asset values does not match with Asset report for this particular asset.

Hi
If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
The execution for current year can have any date of the fiscal year for report execution
BR,Ajay M

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

Export to PDF from Infoview does not show correct data - CRS 2008

I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!

Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan

Report S_ALR_87012000 Asset Register does not show correct values sums

Similar Messages

Maybe you are looking for