Report:S_ALR_87012178

Dear SAP Guru's
This is regarding the following Standard report
S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
Is there any way so that we can dispaly the customer name along with the same Content.
Edited by: EXPLORING MULTIDIMENSIONAL SAP on Sep 6, 2008 4:09 PM

Hi,
I suggest to develop Z report by copying the code of this programe RFDOPR10 which is used for this report, get the help of ur ABAper to change the programe code to display Customer Name in the output.
reg
Deepak

Similar Messages

Report s_alr_87012178 :customer open items - Customer classification

Hi all. The problem concerns the report s_alr_87012178 which is used to display customer open items.I am selecting 'Customer classification' from the dynamic selections and filling it with a value e.g C.
I have assigned risk class A for my customer in XD02 : Marketing tab. When i am running the report, it is displaying the customer even though i have filled in a different customer classification value.
Thanks for input.

Hi Antish,
Were you able to resolve this? If so, could you let me know what was done. I have a similar issue with Customer Classification on FBL5N.
Thanks,
Sam

Report S_ALR_87012178 - customer open item analysis by balance of overdue

Hi,
In report S_ALR_87012178 (program RFDOPR10), when we choose in the selection field screen :
OI sorted list sorting (1,2) = 1
Summarization level (0-6) = 6
OI list summarization (0-2) = 1
The value that we have under the «Sort field» column is the search term of the customer master data.
Do you know if it's possible to have the customer name instead of the search term without any modification to the SAP standard program?
Thanks,
Julien

Hi Julien,
In the Search help ID enter Q - Reference Type and enter the customer name or number. If not Q try other options.
Thank You.

Customer Open Balance Aging Report S_ALR_87012178

hello,
we are using this report Customer Open Balance Aging Report S_ALR_87012178 but when run, it brings customers' names from VD03 search field, instead it would be handy to see full names from Name-field. I understand S_ALR_87012178 is a static report, but my question would be is there any other transaction/report which shows the same but with customers' full name?
thanks in advance

S_ALR_87012178 is the only standard customer aging report.
Following two solutions I could think of to fit your requirements.
Develop a custom report by copying standard customer reports that have full customer name and make changes according to your need.
Or
In report S_ALR_87012178 the customer name is populated in Address field. So you can use this field as your customer name and develop a custom report.
Thanks

Add a new field in report S_ALR_87012178 and use it for sorting

Hi all,
We're requested to add a new field KNVV-VKGRP in this report S_ALR_87012178 (program RFDOPR10). As this is a standard program, I'm thinking of copying it into a Z one due to the problems when editing the report.
Does anyone know the best way to do it? I'll appreciate it so much!!
Thanks a lot in advance!
Regards,

Hi,
The procedure to create the new VOFM.
1. Go to VOFM transaction
2. Page down until you find a new spot on the page to put in the VOFM number and description.
3. Put in the VOFM number and the description of the VOFM.
4. Now the VERY IMPORTANT part of the process. Double click on the VOFM description not the VOFM number to create this as a Development/Correction and not as a repair. If you double click on the number then this copies some existing code and prompts you for a repair.
5. Activate and generate the VOFM routine. Note: Configuration must be setup by the OM team for this step.
for example Go to the routine number that needs to be copied.
Put your cursor on the routine number field that needs to be copied.
Overwrite that number with your new routine number and hit enter.
The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
Ex.
You have to copy routine 104 to 904
Routine number Description Active
104 Bill.bus.item data X
Put your cursor on 104 and then change it to 904 and hit enter.
904 will be created as a copy of 104 and you can make your changes in 904.
Don't forget to activate it after you are done.
refer the below link
https://forums.sdn.sap.com/click.jspa?searchID=3604222&messageID=994791
Regards

Customer ageing report S_ALR_87012178

Hi Experts,
When i execute customer open item analysis report (S_ALR_87012178) for different company codes i am different layout.
For some company codes all items coming under one head.
But for some company codes i am getting items under different heads like clerk 1,clerk 2, clerk 3 and so on....
Clerk 1
Clerk 2
Clerk 3
May i know why the report is coming in different layout for company code to company code.
What configuration causing this to come report like this?
Thanks
Rafi

Hi Mohammed,
There is an provision to maintained Accounting Clerk in Customer Master-Under Co Code Data Correspondence Tab- (KNB1-BUSAB) will hit.
Due to that its appearing in the ageing
The normal process is that customers are created in AR (XD01) and then the MDS will create them as a BP once you have set up the config.
In most FSCM implementations I have seen and worked on the AC is the Specialist.
You need to have a customer master so the standard AR process and billing can be performed.
Some clients build logic so the Collections role is automatically created when the BP is created.
To do this you need to have mappings for the profile, segment, group and specialist.
The Company Code of the customer should be able to determine the segment and profile, depending on the config.
The Accounting clerk, can point to the Specialist - please note it is best to fill in the user id of the Accounting Clerk to support this.
Regd,
Khan.

In the report S_ALR_87012178, Customer name needed

Hi Friends,
In the report Customer Balance of Overdue Items (S_ALR_87012178), full address of the customer is not necessary. Instead we need only the Name of the customer to be displayed in the report
Suggestions are rewarded with points
Regards
Jyostna

Hi Antish,
Were you able to resolve this? If so, could you let me know what was done. I have a similar issue with Customer Classification on FBL5N.
Thanks,
Sam

Customer Aging Report S_ALR_87012178

FI Experts
I am running for our auditors report above to give them a line item detail aging, I created my own variant where I entered 0 as the summarization level to get line items, and also I entered my own days past due 30,60,90,120+. My problem is that the total line items does not add up each of the buckets in the summary part. Auditors are asking for a detail line item that makes up each of the buckets for items over 30, 60, 90, and 120.
Any suggestion will be greatly appreciated
Edited by: Frank on Dec 9, 2009 12:45 AM
Edited by: Frank on Dec 9, 2009 12:48 AM

Ran same report change Summarization Level (0-6) to 0

Recreate report Customer Open Item Analysis of Overdue Items S_ALR_87012178

I am trying to recreate the R/3 standard report S_ALR_87012178 in BEx.
I am filtering Item Status so that only open items are included (0FI_DOCSTAT = "O"). However, the numbers I am getting do not match to R/3.
Any ideas on filters, etc. that need to be applied to duplicate the results?
Update - i'm currently pursuing this as a data loading error since a RRI between this report and it's underlying DSO do not give matching results.
Edited by: Khaled McGonnell on Jan 15, 2010 4:27 PM

hi,
there is a simple solution to this:
go to SE93: S_ALR_87012178 display it take the program name wich is assigned to it.
copy the logic of the report into a Z report.
because STD SAP code should not be distrubed.
customer description will be in KNA1-NAME1/NAME2
the above is already there in the STD program logic.
customer number will be in KNA1-KUNNR
add the above and give it as FS to the developer.
hope satisfies your requriment.
regars,
balajia

S_ALR_87012178 Report -Intrest is coming even though no setting for Intrest

Hi,
When i see the report S_ALR_87012178,I am able to see the Interest for some of the customers even though there was no intrest settings maintained for the customer.
Kindly advice me why the intrest is coming on this report for some customers.
Thanks
Sunitha

Hi Antish,
Were you able to resolve this? If so, could you let me know what was done. I have a similar issue with Customer Classification on FBL5N.
Thanks,
Sam

S_ALR_87012178 Report Issue

Hi,
On the report S_ALR_87012178 is there a way to run the report and sort by the customer name or search term in alphabetical order?
is there a way to run the report and sort by the customer name and/or search term in alphabetical order? Can the report be set to sort by the sorting field (customer search text). It is now sorting by customer number which is meaningless.
Help me
Thanks
Supriya

Hi,
You can go to F.99 in order to see all the reports for Customers.
Hope you will find the best suitable report.
When you are using "Drill down reports" do not forget to select
"Object list (more than one lead column)" this would give you a option to sort them the line items as you want.
Just for your information: SAP1 is the transaction code for all the reports in SAP.
Regards,
Ravi

S_ALR_87012178

Hi,
When i execute the report S_ALR_87012178 ( Customer Open Item Analysis by Balance of Over due Items ) , i will be getting the over due payments of the customer in 60 , 120 days ............
But in this report i will be getting the Customer details at the Header level , where as my core team members want the customer code or name at Item level so that after transporting to Excel they can Filter it customer it,
Is there any option to customize this report in such a way that i can get the customer code or name at the item level.???
Regards
Rajesh

Hi Rajesh,
In the entry parameter called "Summarization Level", in the output control, try to set it as "6".
Tks
Dberts

Enhancement to s_alr_87012178

Dear Friends,
Before post the thread i browse alot for the solution but i didn't
get any relavant solution.
I need to enhancce customer name in customer ageing report(s_alr_87012178).
for this in the selection screen -> output contorl ->
we need to give oi list 1, summ level 6, and oi list summ 1.
I came to know that there is no user exist and badi's for this.
i copied it into zprogram and doing the changes.
but i am unable to change the output table length.
it is classical output report using std methods.
can anyone guide me please.
Edited by: anurag.radha on Dec 15, 2011 5:47 AM

Hi
regarding report on trx S_ALR_87012178:
when you choose the input parameter
"Summarization level (0-6)" : '6'
program RFDOPR10 will automatically set the other parameters as follows:
"OI sorted list sorting(1,2)": '1'
"OI list summarization(0-2)" : '1'.
Consequently it is not possible to only display foreign currency items when using summarization level 6.
The reason why the program works as it does is the following:
when you display foreign currency items it is always necessary to also display the currency.
Without the currency information the OI total would just not make much sense. Summarization level 6, however,
forces the output of the data in only one line.
Since only 132 characters can be printed in one line there is not enough space for additional output of the currency.
Thus it is technically just not possible to also display the currency.
The combination of "summarization level" 6 and "OI sorted list sorting" 2 therefore is technically impossible.
If you want to see the document currency please use summarization level 1.
Please also take a look at note 769226 for more details on this issue.
Kind Regards
davide

S_ALR_87012178 currency

Hi, i need to display the report s_alr_87012178 with a currency different form the local courrency. I've choose the following values
OI sorted list sorting (1,2) 2
Summarization Level (0-6) 6
OI list summarization (0-2) 1
but the system changes the OI sorted list sorting (1,2) from 2 to 1
Thanks
Cristina

Refer to OSS 769338
You select the summarization level '6' for the output control, In this case, the program sets the selection parameters 'OI sorted list sorting (1,2)', 'OI list summarization (0-2)' and 'Company code data'<b> automatically to the values 1, 1 and</b> 2.
Reason and Prerequisites
The summarization level 6 causes a single-line issue of the OI list. That is, the program issues the customer number, the sorting field, the country and the list data in one line. However, only 132 characters are available for every issue line. With that an issue of additional fields is not possible anymore. For this reason, the above-mentioned parameters are set automatically in the program.
<b>
Solution</b>
Use the summarization level 1 if you require the information on the document currency, the business area or the company code in addition to the OI list.

S_ALR_87012178 to display with document currency

Hi Expert,
I tried to run report S_ALR_87012178 and always got the result with local currency, while I want the result with document currency.
I see another thread that sap note 769338 will help. I tried and it does work.
Is there anyone who has the experience of using this report.
Thanks a lot in advance for your reply.
Chih-Ming

Hi
regarding report on trx S_ALR_87012178:
when you choose the input parameter
"Summarization level (0-6)" : '6'
program RFDOPR10 will automatically set the other parameters as follows:
"OI sorted list sorting(1,2)": '1'
"OI list summarization(0-2)" : '1'.
Consequently it is not possible to only display foreign currency items when using summarization level 6.
The reason why the program works as it does is the following:
when you display foreign currency items it is always necessary to also display the currency.
Without the currency information the OI total would just not make much sense. Summarization level 6, however,
forces the output of the data in only one line.
Since only 132 characters can be printed in one line there is not enough space for additional output of the currency.
Thus it is technically just not possible to also display the currency.
The combination of "summarization level" 6 and "OI sorted list sorting" 2 therefore is technically impossible.
If you want to see the document currency please use summarization level 1.
Please also take a look at note 769226 for more details on this issue.
Kind Regards
davide

Report:S_ALR_87012178

Similar Messages

Maybe you are looking for