Report S_ALR_87012277 results vary on user

Hello,
I have 2 different users that are executing the same report (S_ALR_87012277). When user 1 executes the report she gets results that appear to be correct (4 G/L accounts and balanced (3 with 'balance Carryforward' values that equal the 1 with a 'Debit rept.period' value) ). When user 2 executes the reportsshe gets results that appear to be INcorrect (only 3 G/L accounts (these 3 match the 3 'balance Carryforward' values but the 4th 'Debit rept.period' value is missing) causing the report to look off balance). Does this make any sense?

Look at the authorizations , use SU53 to find out missing authorizations .
Else , look up for your basis counterpart - to take a trace of the same to find out the exact bug.
Cheers ,
Dewang

Similar Messages

Report Job was cancelled upon user request???

Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thanks

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

ALV report - copy layout to another user

Hello,
I have a question about ALV reports.
In ALV we have option to select layout and save it by user-specific.
How to copy this layout to another user?
Is there some function/Bapi?
Thanks in advance,
Michal

Hi Michael,
Here are the steps I documented for managing this procedure:
First Step is to READ the Layout into the Program
     The parameters for the layout can be found in table LTDX
Goto SE37 and enter: LT_DBDATA_READ_FROM_LTDX
When (READ) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
An example is shown below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
Execute.
Now our next step is to WRITE the information from the program into table: LTDX
While at the Function Builder Screen enter the new function module: LT_DBDATA_WRITE_TO_LTDX
When you (WRITE) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
When completed, your input screen for (WRITE) should look like the screen below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
IMPORTANT     When entering information for IS_VARKEY, remember to use the u201Cnew useru201D ID
When entering information for IS_VARIANT, remember to enter information exactly as found in table LTDX and remember that the parameter: DEPENDVARS may be needed to complete your entry
Now Execute the Function Module. When completed go to table: LTDX and confirm that your new entry has been added.
Pre Checklist:
1.)     Capture entries (users) you want to copy from table: LTDX
2.)     Make sure you have access to execute function modules/eCATT scripts
3.)     Make sure you have table display access (needed to find and validate updates)
If you'd like the documentation with screen shots please reply with your email address.
Cheers,
Robert

Oracle Reports Server CGI - Report Job was cancelled upon user request.

I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Quiz Reporting - No results are populated! Please HELP

Greetings,
I am currently developing a quiz for internal use. Something
very simple. I publish in flash, I have only 7 (short answer)
questions. However when I complete the questionaire, my email
client launches with the proper subject line, but that's it. I have
used multiple email clients (Outlook, OutlookExpress, Thunderbird)
with the lowest security settings available. I have also configured
my gloabl flash settings to allow everything. Even with all this
done I still get nothing. I've researched and found that Adobe
Captivate2 is compatible with my version of IE, although I haven't
had success with Firefox either. I have used 3 different computers
on my company's network, and 2 laptops that aren't even on it, in
addition my computer at the house.
Below are my settings I have been using (per Adobe's
instructions)
Reporting - enabled (email, with my email address filled in)
Report status as defined by report data
Report quiz results only
Report Interactions and score
Please help! Captivate is a great utility that I love
utilizing, but I feel this is a huge deficiency per my needs.
Adobe's Tech Support could not help. I emailed them my project and
they said it worked just fine on their computer. Which I find hard
to believe given the 6+ computers I have tried to use this on. The
final suggestion they had was to create an entirly new project from
scratch with Captivate2 (originally was using 1), but I have seen
no difference.
Thank You

Hi chazzzmd and welcome to our community
Unfortunately, E-Mail is pretty weak and convoluted. Results
vary widely and are largely undesirable. But even so, are you able
to post the .CP file or resulting movie somewhere where the rest of
us can see it? Maybe one of us will see something that will help.
I've seen many here use something called
YouSendIt to do this.
Cheers... Rick

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

Report RNOTIFUPDATE01 and Variant SAP&WORKPLACE

Hi all,
in Solution Manager I scheduled report RNOTIFUPDATE01 with variant SAP&WORKPLACE.
Following the F1-help and also note 781163 using this variant the report should only replicate/create messages to/in Sol Man which have not been closed yet (status "Solution Confirmed" or "Confirmed Automatically") at Service Marketplace.
Unfortunately using this variant I got many many old messages in Sol Man now. Messages which have SAP status "Solution Confirmed" and Sol Man user status "Sent to Support". Beside the fact the report did not work correctly (or I did misunderstand something) is there a quick way to get the messages to user status "Confirmed"?
Report CRM_SOCM_SERVICE_REPORT is not working here.
Thanks in advance.

I found tables CRM_JCDS and CRM_JEST which contain the status i need to change (user status and system status in both tables).
Does anyone know if there is a report to perform changes on these tables?

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

Error in running Jasper Reports for more than 100 users in stress test

I have created a web application with Jasper reports. during the stress test, we were able to run the same report simultaneously for 100 concurrent users, after that we get the following error. I hope there is no problem in my code (correct me if i am wrong)
We use Web Sphere
The error we get is as follows:
java.io.FileNotFoundException: /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper (Too many open files)
           at java.io.FileInputStream.open(Native Method)
           at java.io.FileInputStream.(FileInputStream.java:106)
           at com.wily.introscope.agent.probe.io.ManagedFileInputStream.(ManagedFileInputStream.java:89)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:85)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
           at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
           at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
           at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
           at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
           at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
           at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
           at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
           at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
           at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
           at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
           at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
           at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
           at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
           at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
           at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
           at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
NESTED BY :
net.sf.jasperreports.engine.JRException: Error loading object from file : /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:92)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
           at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
           at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
           at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
           at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
           at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
           at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
           at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
           at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
           at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
           at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
           at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
           at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
           at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
           at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
           at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
           at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
if this really cannot find the file, then how could it run successfully for 100 users?
Have anyone experienced this problem?
Thanks for your help.

ummm seems odd to have 100 users making a report.. that can be the limitation of your application..

Regarding settings in standrad report "s_alr_87012277"

Dear Guru's,
Presently we are using new version 6.0, in that i am facing a problem in the report "s_alr_87012277",This is for G/L account balances.
when they are 2 values for one g/l account with separate business area,their total should be calculated in that column itself ,prevously in 4.7ee it was taking.
wat r the layout screens we should take ,pls help me out..
Thanks in advance,
cherukuri

Hi
If opening balaces are not correct it seems that year-end closure is not complete. Ensure that year-end closure is complete. Further note that prior to the year-end closure the month-end process should be carried out.
I find FS10n gives a better view option (for individual a/c analysis) than the report you've mentiones as FS10n shows Bal carried forward as a spereate line.
Regards
Nadini

How to send report to the Inbox of user using RE SDK?

Hi,
I want to send a report to the Inbox of user using RE SDK.
How can i proceed to perform above task.
Can anybody send me the detail code? it will be helpful for me to understand.
please help!
Thanks in advance
Amol Mali

Any help on this ?
thanks
Ananth

Save/create a variant in user defined screen in dialog program

is there a way to save/create a variant in user defined screen in dialog program?
thanks...

Few important tables for Variants:
VARI - ABAP/4: Variant storage (similar to INDX)
VARID - Variant directory
VARINUM - Internal number assignment for variants
VARIT - Variant texts
TVARV - Table of variables in selection criteria
TVARC - Variant conditions
TVARUVN - Individual Variant Variable: Assignment TVARV
TVARCT - Text for Variants Conditions
TVARH - Header entries for screen variants
TVARIND - Save screen variants
Regards,
Vishal

How to display additional fields in the results a 'search user'?

This may be a newb question but how can I display additional user attributes in the results of a user search in the admin console?
i.e. more than just the standard fields of: User ID, First Name, Last Name, Status, Enable, Disable, Unlock and Delete.
I would like to include some UDFs that I have defined for the create user form e.g. personnel number.
Thanks,
Bernie

Thats not gonna work for sure. Thats to include additional attributes in the search input parameters drop-down. There is another procedure to do that, but not very sure if it works or not because once I was decompiling the code and found that it doesn't have an implementation. You can anyway try it out, the worst would be that you would not be able to see the column headings, but try atleast:
And thats through the use of properties file. Open up ** and search for the following section-
*#global.request.users.selectedListDisplayFields=*
*#global.request.users.selectedListDisplayFields.lables=*
Remove the comments and update it to below-
global.request.users.selectedListDisplayFields=USR_UDF_EMPID
global.request.users.selectedListDisplayFields.lables=global.xmlmetadata.users.USR_UDF_EMPID
where USR_UDF_EMPID is the UDF and global.xmlmetadata.users.USR_UDF_EMPID is its associated translation.
Thanks
Sunny

Report S_ALR_87012277 results vary on user

Similar Messages

Maybe you are looking for