Report S_ALV_87012140 layout

Hello,
Is it possible to change the layout of S_ALV_87012140 report?
I need to display just a line for each item.
Thanks a lot for your help

I think it is S_ALR_87012140...
Search with combination of dynamic selections and output control and try luck
Srinivas

Similar Messages

Dunning Report Print Layout Issue

Hi
I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
In the print out all the due dates are mixed with the acctual Due dates.
Acctuall Invoices
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     25.02.08              1
10002                     03.03.08              1
10003                     03.04.08              0
Print out
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     03.03.08              1
10002                     03.04.08              0
10003                     25.02.08              1
How can I fix this. This is coming from the System template and we havent change anything.
Could you please help me.
Thanks
Sanjaya

Hi
I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
kind regards
Søren
Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM

Adding a Crystal Report (report or layout) in a specific menu location

Hi,
i want to import a CR Report through SDK.
I found an example in the sdk help center. You can find it searching 'Adding a Crystal Report (report or layout)'.
It works but going in the Report and layout manager i find it under 'Lost Reports'.
i cannot find a way to specify the MENU LOCATION just like the Import Wizard allows.
Can anyone help me?
Thanks
Paolo

hi how you solve this??

Delete Crystal Report Design in Report and Layout Manager

Hi All
How to permanently delete a customised Crystal Report Design imported in Report and Layout Manager?
There is no Delete button at all unlike Form Design?
Kedalene Chong

Hi Nagarajan
Please see image attached, already login as superuser but there is no Delete button for imported Crystal Report Design in Report and Layout Manager.

Report and Layout Import Wizard does not work

We used the Report and Layout Import Wizard extensively in 8.80 with no problems encountered.
We are now upgraded to 8.81 PL07. This is the first attempt at using the wizard in 8.81. The intro window of the wizard, with 'To Start, use the "Next" button' message is as far as I can get. The "Next" and "Cancel" buttons are inoperative - when I click them, there is no response (but they are not greyed out). The program has not crashed - I can move the window, and the "X" close button at top right works, but nothing else does. I am logged in as a superuser, running B1 in an RDP session on the server, same as under 8.80.
Any ideas out there?

Hi,
This is a 8.81 PL07 bug!
I had the same problem this week, and i found the note [1615932 - Buttons "Cancel" and "Next" are inactive in Report and layout import wizard window], that says that it is corrected on PL08!
Regards,
Alice

Download alv report using layout variant in background

Hi All,
I want to download an Alv report using layout varaint in background job.
can any one please help me.
i.e...
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.
Will rewards to helpfull ans
regards
Chetan

hey seshu,
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.

Transaction Journal Report - Print Layout Design

Hi all
Is it possible to add Journal Entry Project Codes to this Transaction Journal Report (Print Layout Design)?
I tried to add Journal Entry Project Codes to this system PLD but the result still not showing any Project Code.
Kedalene

Hi Kedalene Chong
ou don't need a list of variables to use them. Simply go to View -> System Information so whenever you hover around a field with the cursor, in the left bottom corner of the screen you will see the details of that screen along with the variable number if it is a variable.
So you will see something like:
[Form=139 Item=29 Pane=0 Variable=91]
-> in this case the variable number is 91 - use it in Print Layout Designer.
So you can just use the variable specified in these details. When creating the print layout, just go back to your form, stand on a field with your mouse and you will see what variable to use.
Also Check with the PLD Variables Note No 867048...
Symptom
Using system variables when designing a print template for the General Ledger report.
Please note that variable numbers might change when upgrading to a higher version.
Cause
FAQ
Solution
Field Name
Variable Number
Posting Date
62
Due Date
63
Document Date
112
Series
140
Document Number
141
Transaction Number
65
Journal Voucher
66
Reference 1
67
Reference 2
68
Reference 3
69
Details
70
Transaction Code
71
Project Code
72
Costing Code
73
Offsetting Account
74
Indicator
137
Total (LC)
75
Debit (LC)
96
Credit (LC)
95
Balance (LC)
76
Total (SC)
77
Debit (SC)
98
Credit (SC)
97
Balance (SC)
78
Total (FC)
79
Debit (FC)
100
Credit (FC)
99
Balance (FC)
80
Creator
138
Internal Reconciliation
131
External Reconciliation
132
System variables from the Business Partner Master Data window available for use in the General Ledger report:
Phone
117
Fax
118
Contact Name
119
Address
120
Sales Employee
133
Remarks
134
Full Address
135
Hope Hepful
Regards
Kennedy

Oracle reports Page layout problem in HTML

Hi,
I am Using Oracle Reports6i to create my web reports. I found some problem with my reports page layout.
When I print my report from browser which is generated in html, it prints my first page's page number in begining of my second page and it continues in all pages disordering the report.
When I try to print from report builder It prints perfectly.
I want to know how do I control my page layout in html without asking user to set anything in browser each time they print.
Please try to help me with this.
Thank you
Regards
Rajesh Sharma
null

dear rajesh
i was also facing same problem,try these things it may help
change the desformat=htmlcss
destype=file
and desname=(name of file where
u want the output) ex. c:\pi.html
after that open that file i believe it wiil be alright,pls confirm me at [email protected]
bye
null

Report Template Layout Editing

Hi all,
I have few questions to check with you with regards to the report creation process.
I read on the SAP help portal and it states the report creation process.
Step 1 u2013 Create Report template (i.e. using CG42)
Step 2 u2013 Edit the report layout
I am stuck on this step as the explanation on this report template layout editing is very confusing.
Two Questions:
1 u2013 Do you have any documentation or any website (i.e. other than SAP help portal) that explain the step by step with screenshot on how to edit the report template layout? if you have the document can you send to me using my profile address?
2 u2013 If I want to import a report template (i.e. a report template that had already went through all the editing process), how to import it into the SAP, what steps and what transaction codes is used for this step?
Thanks
Karen.

Hi Karen,
Q) What is difference between T.code CG3Z & T.Code to CG34? I bet the one that allow me to import the report template is CG34?
Ans: e.g. you file has saved on Desktop. so first step is to upload the file from Deskop to Application Server which is CG3Z
and once it is uploaded to Application Server ( Directories), you can import the template from Application Server ( Directories) to Libraries with the help of CG34.
CG34 can only import from Directories and not from the Desktop. so both the T.code must be used in sequential manner.
Q) How do I drag and drop those symbol into the Microsoft word sheet on the right screen?
Ans: once you open the CG42. here select the Symol Tree which is nothing but the Property Tree of Specification Workbench.
selec the appropriate Value Assignment and Characterstic and then Below to that that is Buttion "Insert WWI Object in Template" ( + Symbol in Green Colour) , click that Button to Addd it to template. then add the Main Repeating Group i.e. Value Assignment Name the again click on "Insert WWI Object in Template" to add the same to Templates.
Q) After I had imported an external report template into the SAP, how to open it up in the SAP in order to allow me to view it or to edit it?
Ans: See once the ready made template is imported the you can directly assing that template to Generation Variant in CG2B.
If I have statisfied your queries, please grant me the points.
Regards,
Amol Joshi

Missing reports in Report and Layout manager

Hi Experts,
i need to convert with Crystal Converter some PLD Tax reports.
The problem is that under Tax Reports tree, in report and layout manager, reports of typecode 'RB01' are missing!
Why are they missing??
Is there any other way to convert them even if missing?
i can see them in the tax report form, selecting tax register block and press ok.
From the print layout designer they are listed.
Please help.
Thanks
Paolo

Hi Paolo,
What is your B1 PL? Have you solved your problem? Try to upgrade to the latest PL if you are not in it.
Thanks,
Gordon

Report Designer - Layout height and width

Hi Experts,
Is there an option to adjust the report designer layout height and width? I am able to adjust the individual row and column height. I have a report designed in report designer which will have only 5 rows. when I execute this web template the report item is displayed in one entire page instead of only 5 rows.
How can I control/adjust the page size in report designer? Is this possible?
Thanks,
Gnana

Gnana,
are you starting the report from the portal directly, or do you have it embedded into a web template? As the Report is a web item, you can set the size of the item.
At first I was considering posting the reports directly to the portal, but there are some things that I don't like with how it handles them - for example if you have a report based on the query view, when you post it directly to the portal it will execute it with the saved variable values before you can change them. Thus, I have to put it into a web template and set to prompt for variables at the beginning.
Thanks

Report attributes - layout and pagination

When you set the pagination scheme to Row Ranges X to Y(with next and previous links), Number of Rows to 15 and Max Row count to 1000, I need to know what happens with the query. When the user selects the next (or previous) 15 records, does the region's query fire again and query all 1000 (or more) records?
I hope this makes since. I just need to know if the application is selecting all the records over and over as the user move through the report.
Thanks

Thank You, Thank You, Thank You.
That is indeed the point I am trying to make.
My report is a SQL Query (PL/SQL Function body returning SQL Query) and is based on information provided in several PopUp LOVs. The more LOVs used, the more information provided to the WHERE CLAUSE, and therefore the less data returned to the screen.
When the End User produces a small report, they are likely to want to sort it.
But when they bring back huge amounts of data, they don't want it sorted. Especially not automatically sorted.
In most cases, this is happening when we are joining two or three tables with say 10 million rows on each table. The join condition is good (meaning there is not a Cartesian Product) but the resultant data is 10 million rows - something you not likely want to sort. Even with a limit on the number of rows returned (Report Attributes - Layout and Pagination - Max Row Count) to something reasonable, like 500, the 10 million resultant rows are first being sorted and then the first 500 returned.
So, yes, a "sort-enabled" report should NOT automatically sort. Which is what is happening.
Of course, it might be a good thing to have some sort of Variable that we could set on a page to decide if we want automatic sorting. On most pages, an automatic sort is great - as the amount of data returned will always be small.
On the pages where I have this problem, it would be great to do the automatic sort when one or more of the PopUp LOVs are populated. So, within a "After Submit" process I might want to turn automatic sorting on.
Hey, if we are going to ask for an enhancement/change, we might as well ask for something really flexible.

Rename or delete manually created menus from Report and Layout Manager

Hi All,
Does anyone know if it's possible to rename or delete a folder manually created during a report import in the Report and Layout manager?
Kind regards,
Matt

Posted the question on the SAP core forum.

On transaction FBL3N report change layout and save layout icons not activ

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

Hi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan

Add Array grid report into Layout/tab ExtJS?

How to add Array grid report into Layout/tab ExtJS?
Array grid examples are from >
http://apex.oracle.com/pls/apex/f?p=43040:4:467728553403435
js>
Ext.onReady(function(){
4
5var munkyData = [
6
7["7369","SMITH","CLERK","7902","17-DEC-80","800"," ","20"]
8,["7499","ALLEN","SALESMAN","7698","20-FEB-81","1600","300","30"]
9
10,["7521","WARD","SALESMAN","7698","22-FEB-81","1250","500","30"]
11
12,["7566","JONES","MANAGER","7839","02-APR-81","2975"," ","20"]
13
14,["7654","MARTIN","SALESMAN","7698","28-SEP-81","1250","1400","30"]
15
16,["7698","BLAKE","MANAGER","7839","01-MAY-81","2850"," ","30"]
17
18,["7782","CLARK","MANAGER","7839","09-JUN-81","2450"," ","10"]
19
20,["7788","SCOTT","ANALYST","7566","09-DEC-82","3000"," ","20"]
21
22,["7839","KING","PRESIDENT"," ","17-NOV-81","5000"," ","10"]
23
24,["7844","TURNER","SALESMAN","7698","08-SEP-81","1500","0","30"]
25
26,["7876","ADAMS","CLERK","7788","12-JAN-83","1100"," ","20"]
27
28,["7900","JAMES","CLERK","7698","03-DEC-81","950"," ","30"]
29
30,["7902","FORD","ANALYST","7566","03-DEC-81","3000"," ","20"]
31
32,["7934","MILLER","CLERK","7782","23-JAN-82","1300"," ","10"]
33
34];
35
36var store = new Ext.data.SimpleStore({
37 el: store,
38 fields: [
39 {name: 'empno', mapping: '0'},
40 {name: 'ename', mapping: '1'},
41 {name: 'job', mapping: '2'},
42 {name: 'mgr', mapping: '3'},
43 {name: 'hiredate', mapping: '4'},
44 {name: 'sal', mapping: '5'},
45 {name: 'comm', mapping: '6'},
46 {name: 'deptno', mapping: '7'}
47 ]
48 });
49
50store.loadData(munkyData);
51
52var grid = new Ext.grid.GridPanel({
53 el: grid,
54 store: store,
55 columns: [
56 {id:'empno',header: "Employee",sortable:true, width:100,dataIndex:'empno'},
57 {header: "Name", sortable:true,width:75, dataIndex:'ename'},
58 {header: "Job", sortable:true, dataIndex:'job'},
59 {header: "Manager", sortable:true,width:75, dataIndex:'mgr'},
60 {header: "Hire Date", sortable:true,dataIndex:'hiredate'},
61 {header: "Salary", sortable:true,width:50,dataIndex:'sal'},
62 {header: "Commission", sortable:true,dataIndex:'comm'},
63 {header: "Department", dataIndex:'deptno'}
64 ],
65 stripeRows: true,
66 width:700,
67 autoHeight:true,
68 title:'Array Grid'
69 , renderTo: 'munkyDiv'
70 });
71});
any references?
regards
Gordan

Hi Mark,
thanks for reply, I was making example on
http://apex.oracle.com/pls/otn/f?p=43048:22:2659745156195172
using debug grid layout and put into REGION_05
...< div id = "munkyDiv" > #REGION_POSITION_O5# < / div>
in this way I can add 1,2,3 or more reports as tab and grid.
Simple example as first step is basic layout (integration ExtJS and Apex)>
http://apex.oracle.com/pls/otn/f?p=43048:15
username/pass EXTJS/EXTJS
regards
Gordan
Edited by: useruseruser on Aug 8, 2010 2:51 PM
Edited by: useruseruser on Aug 8, 2010 2:52 PM

Report S_ALV_87012140 layout

Similar Messages

Maybe you are looking for