Report Schedules after downtime

Hello everyone,
I am Running BO XI3.1 sp3. If I have 1 report scheduled to run daily at x time and I take the SIA (which governs my CMS) down for 2 days. When the CMS comes back online, will the CMS & the report scheduler process the report to run two times or will it just run once to catch up?
Example:
Report XYZ set to run on Su, M, Tu, W, Th, F, Sa.
SIA/CMS offline for F, Sa
SIA/CMS online on Su.
Will the CMS & Report scheduler process 2 instances of report XYZ or will I just have 1 report?
Thank you all.

hi,
You will not get instances of friday and saturday.
You will get an instance on the day your cms starts.
Regards,
Prithvi

Similar Messages

Sharepoint 2013 and SSRS how to send reports on date schedule after dw load completes

Certainly with subscriptions we can generate a SSRS report on a schedule like say every Monday morning at 5 AM PT. My problem is I want to run those reports but I want to make sure the Datawarehouse completed its load first. Example if
for some reason the DW breaks at 4 AM and does not finish the load the Reports should not run. ONce the DW is finished then reports should run. The 5 AM is really a place holder for 1st attempt to send reports. It should keep trying until
it can send them or Tuesday comes around.
the only approach I can think of is via the DW with a job and stored procedure you could have it exec anything you want. Is it possible to exec the reporting services report from sql? Is there a way from within sharepoint?
Ken Craig

Hi Ken,
According to your you want to fire the SQL Server Reporting Services after the Data Warehouse load data completed, right?
By default, when a subscription is created, a corresponding SQL Server agent job is created meanwhile. The SQL Server agent job has the same schedule with the shared schedule or report-specific schedule that is using by the subscription.
The corresponding SQL Server agent job calls stored procedure AddEvent to add an event in SSRS. Then the SSRS notification service fetches the event from SSRS database to deliver the subscription.
That, we can configure regular shared schedule or report-specific schedule based on the irregular schedule. So in your scenario, you can configure the job steps to fire the subscription after the Data Warehouse load data completed. For the details, please
refer to the links below.
http://social.msdn.microsoft.com/Forums/en-US/32bc6d2d-5baa-4e27-9267-96a4bb90d5ec/forum-faq-how-to-configure-an-irregular-schedule-for-report-subscription?forum=sqlreportingservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

IR reports scheduled in workspace doesnt send out emails.

Hello Everyone,
Please input your experinces or valuble suggestions for our issue.
We have several Interactive reports scheduled through the Hyperion Workspace and the scheduler sends out the generated reports to the users via emails in excel, PDF, web archive and MHTML.
Recently some users are complaining that they are not receving the reports though there emails are in the distribution list. My email is also attached to the distribution list and I receive the reports without any issue. I have checked the log and its shows that job went successfully without any errors and also displays that particluar user's emails too.
I also get a notification to my email everytime the job runs and it is successfull all the time.
We are unable to figure out why this is happening to only particluar users.
Any ideas? Anybody experienced the same issue? We are on version 11.1.2.1.
Jay.

Hi,
I have changed the order of the distribution list and waiting for a confirmation from the users but we are having a new issue.
One of the scheduled job is not sending out the emails to anyone. I tried to run the report manually and it runs perfectly. Right now we are exporting the file in the format 'Microsoft Office Web Archive.'
The scheduler was running perfectly untill 5/18 but didnt sendout after 5/18. I have ran report manually and exported as Web Archive and observed that the file size is 17MB. I have checked the previous outputs and all were under 11MB from the time since it was scheduled.
I suspect this is because of the file size. I have also did a trail run by changing the export option from Web Archive to Excel and it did send out the report and excel file size was 3MB.
Any ideas on this limitation? We are on version 11.1.2.1.
.

Hyperion S9 BI+ 9.3 Financial Reporting Scheduler is stooping automaticall

Hi while starting services Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server is stopping automatically why this is and if i launch FR Studio i am getting a error message "You are not authorized person. Contact your administrator" could I know the reason and how can i rectify.

Hi,
I believe- What you mentioned is a classic example of Memory leakage with Windows-Hyperion duo.
We used to face similar situation with Windows & Hyperion EIS. So, during the off hours, a scheduled batch script kills
the process & re-start the service +(as you seem to be now doing manually)+ .
TASKKILL /F /IM olapisvr.exe > %LogFile%
NET START "Hyperion Analytic Integration Server" >> %LogFile%
I'm not quite comfortable with this solution. However, we didn't face problems after doing this.
- Natesh

Automation of BO Report Scheduling

Hello,
I need to automate the process of bi report scheduling using File Based events , following are steps which i followed:
1) In CMC i created a file event named Trigger.txt and gave the path D:\BO_Events\Trigger.txt.
2) Then i right clicked on my web i report and selected schedule.
3) In recurrence i selected the number of retries as 20 and and interval to be 60 secs.
4) Then under Events tab i selected available events to be Trigger.
5) The same i did in the default settings and saved all the settings.
6) Then i mannualy created one text file named Trigger and saved it in the assigned location.
7)Then under the history of instances ,i did not see any instances created.
8) Again when i mannually scheduled it , the status remained to be pending.
9) After which i deleted the file from the location and again created it, then on refreshing the instances the report was scheduled successfully.
Am i missing any steps in this process ,since i need the report to identify the trigger file by itself and schedule it .
Also i read in some other blogs where it suggested that if the trigger file is already present in the folder the report would not start scheduling i.e. when the instance status is pending only then the trigger file should come in the specified folder.
Which might not be possible since in our system the trigger file is dependent on some other process .
Hence there is no specific time where trigger file would come inside the folder.
Please help.

Hi Arjit
Please refer point no.3 in the first post .I have set the number of retries to be 20 and interval of 60 secs. And yes ,the event job server is working properly.
Please tell me if i have missed something.

Refresh Webi reports automatically after BI data loads ?

Hello,
We are about to install BOE X.1 on top of BI 701.
The idea would be that the users would perform their WebI daily reporting, but obviously only after SAP BI night batch scheduling is finished, and the BI infoproviders filled.
I've read that BOE ofers you the ability to refresh the reports upfront.
We were wondering if there is a way to easily implement this logical dependance : to refresh the Webi Report only after the end of BI data loads.
There is off course, the possibility to use an external scheduler, but we have checked the licencing and it's quite expensive.
Is there another way to do so ?
Many thanks for your attention.
Best Regards.
Raoul

Hi Alan,
Thank you very much for your quick answer.
I would like to make sure that I understand you since I'm not very familliar with BOE :
First , we create an event in the CMC and connect it to a file location
Then we schedule the document and add the file event : do you mean schedule the webi report ?
Finally create the file as part of the Bex query refresh process : how exactly do we do that, in the BI process chains ?
Thank you very in advance for your help.
Best Regards.
Raoul

Set custom database userid for report schedules

Hi,
I am writing a c# program to reschedule reports deployed to CRS 2008. I am able to reschedule reports, but not able to use custom database username/password. All my schedules still use the original database settings from the report even after setting the property "UseOriginalDataSource" to false. Below is the code snippet I am using. Am I missing something here?
               ReportLogons rptLogons = report.ReportLogons;
                    for (int j = 1; j <= report.ReportLogons.Count; j++)
                        ReportLogon rptLogon = rptLogons[j];
                        rptLogon.UseOriginalDataSource = false;
                        rptLogon.CustomUserName = "sykampillila";
                        rptLogon.CustomPassword = "facets";
                        rptLogon.CustomDatabaseName = infoObj.ProcessingInfo.Properties["SI_LOGON_INFO"].Properties["SI_LOGON1"].Properties["SI_DB"].ToString().Trim();
Thanks
Ajith

Did you check the new instance using Query Builder?
Sincerely,
Ted Ueda

Promotion and report schedule job goes to pending state

hi everyone,
we are using BO4.1 SP02 Patch 1 platform, suddenly now report schedules and promotion jobs are not promoting and it goes pending state.
we restarted the LCM APS and AJS , but still promotion job in pending state
we also restarted Webi APS and AJS but still schedule in pending state.
anyone faced this problem before, could you please help us to find the cause.
Regards,
Ganesh

HI Ganesh
Can you make it 1 and try out once
Because 1 = OUTPROC and 100 = MIXEDPROC
Outproc causes the job server children to shut down after every job
Mixedproc causes the job server children to shut down after every 100 jobs
and Job server children will be automatically shutdown if left unused for more than 2 hours
Can you check the taskmanager for the jobserverchild.exe is created or not ???
Please get back

Error on open the Report Schedule Page from other application

Hi,
I want to open the only "Report Schedule Page" of the InfoView from my application. For this I am using the following url -
http://servername:8080/businessobjects/enterprise115/desktoplaunch/InfoView/CrystalEnterprise_Report/schedule/get.do?objId=526
The problem I am facing is that sometime the Report Schedule Page open successfully and sometimes it gives the following error -
HTTP Status 400 - Invalid path /InfoView/InfoView/logon/logon was requested
type Status report
message Invalid path /InfoView/InfoView/logon/logon was requested
description The request sent by the client was syntactically incorrect (Invalid path /InfoView/InfoView/logon/logon was requested).
Apache Tomcat/5.0.27
Please help me in resolving this issue?
Thanks,
Vicky

Hi,
first of all it is neither supported nor recommended to embed or call single components or pages of InfoView in other applications. You would have to write your own schedule page using the BO SDK.
The problem you are facing looks like the component you are calling does not get or find a valid session to the BOE system in the desired place. But even if it would (sometimes you are seeing that) I doubt that it would work to schedule a report using this mechanism as the further requests when pressing the OK button will call other parts of InfoView then, which will probably cause other problems. So try to use another solution as stated above.
Regards,
Harald

Crystal report scheduling error

Hello,
We are getting this error Intermittently, "login error. [CrystalEnterprise.DiskUnmanaged]: [Logon failure: unknown user name or bad password.]" when we schedule crystal report to file location. I had checked the user name and password and access to the file location, they are fine. We have scheduled this report to run daily, but somedays it throws the above error and somedays it runs fine. Any ideas please?
Thanks,

Rakesh,
Issue has been resolved in below forum, please check
CrystalEnterprise.DiskUnmanaged: Logon failure
Crystal Report Scheduling Destination Options in Infoview
Regards,
Arjun

Report Scheduling. How to syncronize the GMT and the local server timezones

Hi everybody, I need to schedule reports using the Schedule tab on BIP, but I didn't still understand how the syncronization between my server's timezone and the GMT timezone works.....
I noticed that when I open the Report Schedules initial page, this is refreshed using the GMT timezone as follows:
Page Refreshed Monday, July 26, 2010 7:53 AM GMT
Actually I'm located in Athens (GMT+3)
I noticed that if I want to Run once a report, ONLY the GMT is took in consideration.
For example, I want to run a report at 11.30 (Athens timeone) where the time conditions are the following:
BIP time (GMT timezone): 08.00 AM GMT
server timezone: 11.00 AM (Athens time)
So, if I want to run a report at 11.30 AM (Athens time), I have to write in BIP (Run once) 08.30 AM, instead of 11.30, otherwise if I put 11.30, the report runs 3 hours and 30 minutes later instead of only 30 minutes !!! This is very frustrating....because it means that everytime I need to remember that there is a difference of 3 hours and if I want effectively....
I also set the Report Formatting Time Zone = GMT+03:00 to fill the gap between the GMT's timezone and Athens's timezone but it didn't work....
I found that the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> is set into the tmpl.xsl; I tried to change it (GMT+3 or GMT+03:00), I stop and restart the BIP server....but nothing...the BIP timezone is always GMT (as showed by th Page Refreshed date and time).
At the end my question is this: is there a way to modify the internal BIP timezone in order to fill the gap between this and the server timezone ?
In other words, I'd like to see the page refreshed with the server timezone (Athens timezone) and not the GMT timezone, in order to schedule reports thinking directly my local server timezone (and not think always to calculate how many hours is the difference).
This, I think is a common issue for everybody, but....I didn't find nothing in the forum....
If somebody found a workaround, every help will be appreciated.
Thanks
Alex

Good Morning Vetsrini,
I know that the "Report Formatting Time Zone" is used to set the timezone properly INSIDE the report...but my attention now is concentrated on the Scheduling...
As I mentioned before I'd like to find a way to syncronize the BIP timezone (based on GMT) and my local server timezone (Athens, GMT+2), and this I think it's possiblie only if I can modify the BIP timezone (GMT): instead to have GMT, I'd like to have GMT+2 in order to have the same time in both of systems.
I already tried to change the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> into the tmpl.xsl, but it didn't work....
I don't understand how all the others millions of BIP users who don't live in UK can use the scheduler keeping in mind always the gap between their local time and the GMT time set in BIP......
Do you have another hint or workaround ?
Thanks for your help
Alex

Format in Report Schedulling

Hi Gurus,
I am using Report Scheduling Functionality of SAP. But the report which i am getting is not in appropriate format.
Please tell how can i change the layout of Scheduled report which can be fitted in Excel?/
Please revert asap.
Thank You

Hello,
Please describe more what is the transaction code you are using, what is the output etc.
What error it is giving when downloaded to excel.
Regards,
Ravi

Report schedules failing silently

Hi SAP BI gurus and experts!
We are facing a tough intermittent issue concerning report scheduling. From time to time, mostly on a weekly basis, scheduled reports are not sent via email to the recipients. We try to check on CMC if there's any error, but cannot find anything there - no error status or error message for any report instance. Most of the time, when we restart AdaptiveServer service, emails that had not been sent are then sent normally.
Does any of you have faced this issue before?
Could you tell us how we could see the status of the sent/not sent reports?
We are also checking the log, as described in this post Schedule report (log file) to see if we can find something there.
Are we checking the right places? Any ideas on what could be causing this behavior?
We are using SAP BI 4.0 SP9.
Thanks!!
Best Regards,
Luigi

hi,
You will not get instances of friday and saturday.
You will get an instance on the day your cms starts.
Regards,
Prithvi

BOE report scheduling based on BW event

Hi Experts,
I am looking for a solution to schedule a BOE report (eg. crystal, WebI) based on a BW event (eg. data load is finished).
Systems: BOE XI 3.1 SP3, BW 7.01
The best option with minimum SDK enhancements so far is when BW routine creates a file in a specified folder and BOE Event Server picks up this file and raises a file event which is used as a trigger for a report schedule.
Has anyone come across other alternatives without external file manipulations?
Any insight into possible BOE BI 4.0 new features on BW-BOE cross platform scheduling and events handling?
Thank you

Hi,
BusinessObjects Enterprise also has an Event Server and the most simple event could be the "existence" of a file on a file server. and yes there is also an SDK for it. You can find more details as part of the BusinessObjects Enterprise documentation on help.sap.com
ingo

XL Reporter Scheduled Jobs and connection settings

Company needs to decommission current SQL Server and move to new box.
Company has many XL Reporter scheduled jobs that run on a client machine.
When the new sql server is in place, what will happen to those jobs? The client machine SBO installation will be directed to the new sql server and the license server there. Will the scheduled jobs "know' from the SBO client to go to the new server for data? Or is the connection string somehow encapsulated in the scheduled job such that they will still try to access data on the old server?
SBO 2007 A SP 00 PL 48
(Yes, I know it's old. There are reasons.)
TIA.

Your 2nd guess is true: the connection string somehow encapsulated in the scheduled job such that they will still try to access data on the old server. It will not automatically find the new server unless new server has the identical settings.
You probably need to re-schedule those jobs.
Thanks,
Gordon

Report Schedules after downtime

Similar Messages

Maybe you are looking for