Report Script returns no data and "java.io.FileNotFoundException" error

When attempting to write to a new file (Eg: C:\TEST.txt), Report Script returns no data and "java.io.FileNotFoundException" error occurs.
This error occurs only in Essbase 9.3.1.3 release, however it works fine in release 9.3.1.0.
After running the report the script, it pops up the follwing message:
"java.io.FileNotFoundException: ..\temp\eas17109.tmp (The system cannot find the file specified): C:\TEST.txt"
When checked the TEST.txt, it was empty.

Sorry folks, I just found out the reason. Its because there was no data in the combination what I was extracting.
but is this the right error message for that? It should have atleast create a blank file right?

Similar Messages

Someone is using faebook to run java script to get data and email from me in windows 8

someone is using faebook to run java script to get data and email from me in windows 8

Is this a developer question?
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Create a listing of reports with last run date and # of times run

Hi All,
I want to create a listing of reports with last run date and number of times report is run in the past 18 months.
If anybody can please help me with the query for the same.
Regards,
Sk
Edited by: user10989244 on Aug 18, 2009 7:12 AM

Hi Sk
Assuming you have the collection of statistics enabled, which it is out of the box, you can get the information you need from the EUL5_QPP_STATS table. This script will help:
SELECT
QPP.QS_DOC_OWNER WORKBOOK_OWNER,
QPP.QS_DOC_NAME WORKBOOK_NAME,
QPP.QS_DOC_DETAILS WORKSHEET_NAME,
QPP.QS_CREATED_BY RUN_BY,
TRUNC(MAX(QPP.QS_CREATED_DATE)) LAST_USED_DATE,
COUNT(QPP.QS_ID) TIMES_USED
FROM
EUL5_QPP_STATS QPP
WHERE
QPP.QS_CREATED_DATE >= ADD_MONTHS(SYSDATE, -18)
GROUP BY
QPP.QS_DOC_OWNER,
QPP.QS_DOC_NAME,
QPP.QS_CREATED_BY,
QPP.QS_DOC_DETAILS
ORDER BY 1,2,3;
Best wishes
Michael

Why not Deprecate java.util.Date and java.util.Calendar

With the introduction of java.time, why did you not flag java.util.Date and java.util.Calendar. These classes have been a bane to every Java developer and should never be used again with the introduction of Java 1.8.

Adding the @Deprecated annotation would only just provide a warning about an old API and recommendation to the developer(s) to no longer use it. Doing so would not break any existing library out there; in fact quite a number of constructors and methods on the Date class have already been flagged deprecated.
The new java.time package is far superior to Date/Calendar.

Java.sql.Date and java.util.Date - class loaded first in the classpath

I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????

I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work.

Java.util.Date and java.sql.Date

when i am trying to displaying date in my jsp page errors occurs saying that java.util.date and java.sql.date are matching..
i have some sql statements which i need to execute in the page.so i cant delete that import sql statement.
so what is the solution for this.
i want to display the date as 19th april 2003....in the jsp page.
thank u

You should use full names.
java.util.Date date;
java.sql.Date sdate;
..And it may be a good idea to delete one of the two "import" declaration of packages.

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

Is it possible to run Go URL SQL and return raw data using Java?

Hi All,
I just got GO URL SQL working in HTML, when i type the following URL on to the address bar.
https://odsau.oraclecorp.com/analytics/saw.dll?Go&SQL=select+"MFG Serial Number"."Job Name","MFG Serial Number".Item+from+"Supply Chain Management"
It prints out a table with all the data that query from the database in a HTML page. However, I want to be able to manipulate these data in a JAVA script.
Is there a similar function i can use in Java script and return raw data so i can store them into a variable for data manipulation?
Or is there a work around that someone has already done ?
Thanks
John Lau

You can excute SQL statemetns throught JDBC, but that doesn't have a facility to read those statements from a file. You'd have to write code to read the file and create and execute statements through JDBC. That should be pretty straightforward though.
It's conceivable that there's a third party library out there that does it, if you know what to look for.
If you're not familiar with JDBC, check out http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/

CR 2008 Advanced Chart in Report Header -Returning Repeated Data

Very new to CR. I've a situation i need some assistance with. I have an advanced chart located in a report header. the chart is sourcing data from a stored procedure call. the stored procedure returns timeseries data (timestamp, value) for a one month period, thirty values. There are many columns in the result set but i'm trending only two of tehm in the trend.
Problem is that, although the data set has only thirty values, when I view the trend visually the data is repeated many times over. So i'll see the data for the dates 1...30, then 1...30, many times over. If I zoom into the trend I can get to a point where there's a single month of data in the extents but this isn't the desired behaviour; i want to see only the 30 values plotted.
configuration is,
Advanced Chart -Line chart format-
"For each record"
(Date Time Field)
"Show Values"
(Series Data Field)
I've confirmed using Field Explorer / browse data that there are only thirty values in the result set. What am I overlooking here?

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Report Script Help Needed - Data Extract

Hi,
I have a cube with 11 dims: Account, Period, Resource, Facility, SSSS, CCCC, Activity, Years, Version, Scenario, Charges
I need a report script that will extract data for a certain year and scenario only. I have not written a report script in a long time and have the following thus far. However it's not extracting data that I know exists. Can anyone help? Thanks is advance. This runs but I just get a blank screen or file....
//ESS_LOCALE English_UnitedStates.Latin1@Binary
// This report script extracts data from cube
"FY11"
{DECIMAL 4}
{NAMEWIDTH 25}
{SUPCOMMAS}
{SUPBRACKETS}
{SUPPAGEHEADING}
{NOINDENTGEN}
{SUPMISSINGROWS}
{SUPZEROROWS}
{TABDELIMIT}
{SUPFEED}
{ROWREPEAT}
"JAN"
"FEB"
"MAR"
//"APR"
//"MAY"
//"JUN"
//"JUL"
//"AUG"
//"SEP"
//"OCT"
//"NOV"
//"DEC"
"BUDGET"
// This is the members of the CCCC dimension to extract
// This is the members or the ACCOUNT dimension to extract
!

Hello -
You can try/modify the code below and see if this works -
//ESS_LOCALE English_UnitedStates.Latin1@Binary
{ SUPMISSINGROWS }
{ SUPZEROROWS }
{ SUPFEED, SUPBRACKETS, SUPCOMMAS }
{ NOINDENTGEN }
{ DECIMAL 4}
{ NAMEWIDTH 30 }
{ ROWREPEAT }
{ TABDELIMIT }
{MISSINGTEXT "-" }
<PAGE ("Scenario", "Resource", "Facility" ,"SSSS", "Activity", "Version", "Charges")
"Budget"
"Resource"
"Facility"
"SSSS"
"Activity"
"Version"
"Charges"
<COLUMN ("Year","Period")
"FY11"
"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
<ROW ("Account", "CCCC")
<LINK (<DESCENDANTS ("ACCOUNT") AND <LEV("ACCOUNT",0))
<LINK (<DESCENDANTS ("RT9_CCCC") AND <LEV("CCCC",0))
Here you may want to change teh combination in the Page dimensions for eg -
I know for Scenario you want Budget
But for Version should it be "Version" or may be "Working" Or "Final" or any other version dimension member ...?
Same way modify the dimension memebres for other dimensions.
Regards
Edited by: Rosi on Aug 24, 2009 10:01 AM
Edited by: Rosi on Aug 24, 2009 10:02 AM

Form Letter Report - How To Format Date and Number Hidden Fields

Hi
Is it possible to format date and number fields in a form letter report. This case were Paper Design shows fields as $<hire_date>. The examples in reference book only print character values which do not require formatting. I cannot determine how to achieve this. Cannot select fields from Paper Design view as per other report styles where can apply formatting. Do I have to perform formatting in the query to return date as string in format I wish for? This is not case for other report styles.
Thanks

you could add a field, set the source of the field to hire_date (assuming hire_date is a column in the data model), and put a format mask of whatever format you want. then set visible to No.
then instead of &<hire_date> you can instead type &<name of your new field>.

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

Data Warehouse:java.lang.NoClassDefFound Error while using OWB API for Java

I was writing code to use the OWB APIs for Java:
I have imported the folowing files:
oracle.owb.connection.RepositoryManager;
oracle.owb.connection.OWBConnection;
oracle.owb.connection.ConnectionFailureException;
when jvm tries to get instance of Repositary Manger by the following code
reposManager = RepositoryManager.getInstance();
I get the following exception:
Exception in thread main
java.lang.NoClassDefFoundError: com/objectspace/jgl/HashMap
I have checked my OWB and Java environment but I cant locate com/objectspace/jgl.jar file. Can some one tell me were this jar is located in so i can import it.

Either use some criteria you develop related to one of the keys on the table or use some sort of record limiting method.
Note the method of limiting will vary related to the database you are using. You will have to look at the documentation.
For example I am told this will work in MySQL to get 200 records starting at record 100.
SELECT * FROM myTable ORDER BY whatever ASC LIMIT 100,200
Because you are running out of memroy I assume the table is large,
I am not sure what the impact of the above will have on performance because if in the above if the order by is not based on an index at the server level all the records will be selected and sorted before the records are limited.
I would make sure you have an appropriate index.
If you use the advanced search over the user forums using "resultset paging" and possibility the database you are using you should be able to get some ideas.
I hope this makes sense to you.
rykk

Executing multiple scripts using sqlcmd utility and halt execution on error

Hello Everyone,
This is a kind of urgent. I'm stuck with this from last couple of days and had a bad weekend due to this.
Any help on this topic will be appreciated.
I'm running through an issue in which I am executing 214 sql scripts in a folder using
sqlcmd -S %Server% -E -d Employee2K6 -b -i "!dir!!file" -b -r1 1>NUL 2>"%logs%\!file!.log"
I'm able to generate the logs as well. I'm not able to stop the execution on error.
Can anybody tell me how to stop the subsequent scripts execution if any of the scripts fails?
Many Thanks!
Kusum

Hi Visakh,
Thanks for the reply.
I think I didn't put together my question correctly here.
Here's some more information for you.
I'm executing the below mentioned command in a batchfile.
sqlcmd -S %Server% -E -d Employee2K6 -b -i "!dir!!file" -b -r1 1>NUL 2>"%logs%\!file!.log"
the !dir!!file here brings the folder that contains 214 scripts. I want the script execution to halt whenever a script
fails.
Right now all the scripts are getting executed and if some of them fails it generates the logs as well.
I checked sqlcmd commands to halt execution on error. The msdn has it has -b but that's not working for me.
Any help on this is highly appreciated.
Thanks!

Report Query returning "No Data Found" with bind variables

I put a simple query into Report Query:
Select "bluefish". "name" as "name",
"bluefish"."primary_flag" as "primary_flag",
"bluefish"."status" as "status",
"bluefish"."ID" as "ID" from "bluefish" "bluefish" where "bluefish"."ID" = :P3_XPRINTID
When I test the query, data is returned; however, when I try to run the query using "Test Report" button, I get an error 01403 No Data Found. If I replace the bind variable with an explicit value, the report works.
Anyone have any ideas as to what is causing this problem? I am using the Generic Report Layout, with various output types. I AM editting the query and defining the bind variable before I test the report (otherwise, the query wouldn't run).
Charles

Sometimes if you create a form/report/whatever using the wizards, it will create an After Submit process called something like Reset Page - basically you want to make sure you don't have any After Submit processes that call a Clear Session state (it may say something like Clear Cache for Page).
In your branch, there is also a box that says Clear Cache - you want to make sure that does not have page Number 8 in it or it will clear your session state.
Put the page in Debug mode and read through it - check to make sure your value is getting saved and maybe you can see what is going wrong.

Report Script returns no data and "java.io.FileNotFoundException" error

Similar Messages

Maybe you are looking for