Report Selection Screen Problem

hi..
I created a report in which the selection texts of my program had been defined,but when i
had transported it to the PRD Server ,it is not displaying the text which i had specified
in the report for the selection screen.
but after transporting it i again check in the DEV Server
It is still displaying the Texts which i had specified ............
I want to know the reason why it is happening? Can anybody tell me reason for it and provide
guidelines in solving it...

it is because you did't save your text along with your report transport request.
just move your treansport request to PRD also in which your text is there.
check version of text goto>text element>selection text>utilities>take the transport request which shown here and move this to PRD also.

Similar Messages

Problen in report selection screen

Hi ,
I had a problem in the report.In the report selection screen user asking to keep page no option.So when they select the page no in the selection screen,so from that page number report out put should display.
how to do this.
Thanks,

If you generating the LIST using the classical approch you cah use the SCROLL LIST keyword for this purpose.
Like:
DATA: L_PAGENO TYPE I.
L_PAGENO = 3.
START-OF-SELECTION.
DO 100 TIMES.
WRITE: / SY-ABCDE.
ENDDO.
SCROLL LIST INDEX 0 TO: PAGE L_PAGENO.
TOP-OF-PAGE.
WRITE: 'Top-of-page'.
Regards,
Naimesh Patel

Table Control on a report selection screen -not a dialog transaction screen

Hi
Does anyone know of a way to have table control functionality on a report selection-screen? The program needs to be able to run as a background job (ie cannot be a dialog transaction) and we need to be able to save variants with the selection-screen values.
Any help would be appreciated.
The key point is we want to allow the user to enter a dynamic number of rows of table data on the selection-screen, save a variant containing that data and execute the program with the variant as a background job.
Thanks
Nicole Knight

Hi Nicole,
The main problem is how to persist the data. If you are not able to create a couple of tables then you could always utilise TVARV instead. On a similar line to my original post you could have the button call a dialog transaction. In here you could do your normal GUI table control. When saving the data simply transpose each column into a separate select-option held on TVARV keyed by the 'variant name' + fieldname. Then retrieve and transpose this back when executing the report.
Other methods could be storing the data in cluster xy (see EXPORT TO DATABASE command).
This seems a bit overkill for what would be a couple of maintenance dialogs.
Cheers,
Pete
PS. The view cluster is just a way of hierarchically performing table maintenance across multiple related tables. It offers a good UI for this purpose (header and item config tables) and is utilised extensively in the IMG.

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

ECCS : custom characteristics into standard report selection screen

Hello guys,
I have added a custom characteristic which is also a subasignment to the EC-CS module.
This field now appears into the standard report selection screen as expected.
I want to define this field as a mandatory selection field, do you know if this is possible? (exemple of standard report CX34A)
Thank you in advance for your help
best regards
Pascal.

Hi Thereza,
This field is already flaged
I have found the following solution : create a variant and assign it to the standard transcation with transaction SE93..
Best regards

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Number of Entries icon should come on report selection screen

Hi,
In my requirement, I want Number of Entries icon on my report selection screen.
Means when i insert the required selection parameter's, then i want to see the total number of entries, which is come after the execution of my report.
Please let me know that how can i do it...
Regards..

HI.
Check the link display number of line items in my report at the title bar
I have extract the part from the above link.
if u want to display the no of line items, as shown in SE16, u create a SET STATUS with a push button with name No of Entries on the report screen.For that status, u write the code as to display no of lines in ur table by using either
DESCRIBE TABLE itab LINES lin.
lin gives the no of line items.
or
select count(*) from vbap.
write sy-dbcnt.
U got require output, when ur pressing No of entries button, then this will display on the output screen.
Thanks and Regards
Sachin Sharma

Two selection screen problem in one report

i have a two selection screens 1000 & 2000 in single report , which needs to be executed one after the other ,
the problem is when i execute second selection screen(2000) , the cursor is going back to at-selection-screen once again.
but i need to trigger start-of-selection directly after executing second selection screen,
the first selection screen 1000 will be executed with the help of select options..
the sample code is below .
at-selection-screen.
    perform validations.
   call selection screen 2000.
    at selection screen on value request p_adm
start-of-selection.
   main logic

Moderator message - Cross post locked
Rob

Problem in Report selection screen

Hi friends,
I have a requirement to change the selection screen dynamically .
My actual requirement is, i have there radio buttons in the selection screen ,
based on the click of the radio button the input blocks should get changed.
I am able to achieve that by looping the screen in the event of selection screen output.
My problem is if i execute the report defaultly the first radio button is selected ,
so my first selection screen block should display but this is not displaying.
If i write code in initilization event , this works , but this event is triggering every time
so i am unable to use this event and i am unable to set flags also to solve this .
Kindly Provide me a solution.
Thanks & Regards,
Arun.

Hi Arun,
I think may be you have misssed the part user command which is to be used as follows:
PARAMETERS RAD1 RADIOBUTTON GROUP RAD
DEFAULT 'X' USER-COMMAND flag.
If its already there, kindly copy and paste your code here so that we can help you...

Match code in report selection screen does not show any values for 0FISCPER

Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
Michal

Hi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Standard PNP selection screen problem in reason for action type

Hi all,
We have used standard PNP in one of our report program.
The input for 'Reason for Action' (excluding a particular reason for action ) has no effect on the actual selection of data from the PNP. i.e. even if a particular reason for action is excluded in the selection, record pertaining to that action for reason is still picked in the PNP selection and passed on to the program through Get PERNR statement.
The above problem seems to affect all the standard and custom HR Reports as well.
Please advise on how exactly the excluding of a particular reason for action work in selection through PNP and is there anyway to solve the problem.
eagerly waiting for your response.
Thanking You,
Regards.
Deepak

Thanks for your response,
We tried but it did not work.
Our code is as follows,
INITIALIZATION.
W_REPID = SY-REPID.
PERFORM CREATE_RANGES.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0000 SPACE PN-BEGDA PN-ENDDA.
PERFORM GET_DATA.
END-OF-SELECTION
If you could give us your email id, we would email the screen shots of the selection screen and the output.
my email id - [email protected]
Thanking You,
Regards
Deepak

Report Selection Screen Problem

Similar Messages

Maybe you are looking for