Report Server asking for credential as home page

Hi,
I have a user that when she tries to logon to Report Manager the system asks for her credentials and then denies permission.
We have even tried enhancing her permissions to the same level as mine (full admin) , but it asks for her credentials and denies permission.
Can anybody help?
Mr Shaw

Hi Mr Shaw,
Based on my understanding, when a user access report manager, credential entry pops up and the user account doesn’t work, right?
In Reposting Service, RSWindowsNegotiate is added to the RSReportServer.config file by default. Negotiate specifies report server can either accept Kerberos or NTLM authentication tokens. In this scenario, the issue could be caused by Kerberos authentication.
If there is a mismatch between the destination specified in the token and the report server process configuration, the underlying Kerberos authentication scheme supported by Windows will prevent report server from authenticating the user. So please refer to
methods below to fix the issue:
• Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the Reporting Services configuration file (in SSRS 2012, this file locates at xx:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config).
• Change the report server service account to Network Service.
• Configure a specific hostheader for SSRS, configure your DNS server to understand that hostheader, and configure your domain controller to have an SPN for the hostheader and the report server service account.
For detail information, please refer to this article:
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008.
Reference:
Authentication with the Report Server
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Similar Messages

UCM workflow notification - link to document asking for credential.

Hi,
We are using UCM 10gr3 and WCI 10gr3 in our project. We have integrated the content from UCM on to the portal KD through crawler. Also we have some workflow in place as well.
The problem that we are facing is: The link to the docuemnt in any workflow notification from the content server is prompting for credential.
We want to by pass this..i.e on clicking on the link of the documents it should not asked for credential rather it should show the conent information.
Any help is much appriciated.

OK this is a very different but interesting question...
Lets have another look.
If I understand you, users are already logged into a Windows domain and these credentials are used to authenticate with WCI using 'Integrated Windows Authentication' IWA through the browser.
It is possible to get UCM 10gr3 to use IWA also but this requires that UCM is installed on a Windows Server and is using IIS as the webserver.
If that is the case then the UCM ISAPI plugin code can handle the IWA for you. you would then need to make sure (via a provider and possibly a credential map) that AD group memberships are available to UCM and are clearly mapped to UCNM security roles. Provided the roles evaluate to give the user permissions on the expiring content it will all work without authentication.
NB UCM 11g works in a completely different way
If UCM is installed on *nix or using Apache then this will be too much effort!

10g express, how to change port number for the database home page

10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jl

Andy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl

4.0.1 will not load home pages instead loads last view pages even with it set for showing only home page.

I have set under tools, options, general tab for showing my home page but when I restart firefox it loads the last viewed sites instead of the home page.

bump
It seems to be a bad interaction between Tomcat and running as a Windows service.
No thoughts out there?
I guess I'll be forced to upgrade to Tomcat 4.1.27 or 4.1.28. - MOD

I subscribed online and now want to cancel my product and receive a full refund. where can I find the registration number asked for on the refund page.

I subscribed online and now want to cancel my product and receive a full refund. where can I find the registration number asked for on the refund page.

Hi rosemarym,
Is it the ExportPDF subscription that you want to cancel? If so, please see Cancel your membership or subscription | Acrobat, Acrobat.com online services. There is no registration number associated with a subscription (your Adobe ID acts as verification).
If you're still having trouble unsubscribing, please let me know and I can help you take care of it.
Best,
Sara

Outlook 2010 client ask for credential when Exchange 2010 server restart

Hi,
Each time our Exchange server is restarted (most of time for update installation), all open Outlook clients are prompt for credential.
This is annoying because when the users come back, sometime they don't take care about the credential windows and believe that's they don't receive any mail and start to prompt the support when they notice that's their mail come to their mobile but
not on Outlook...
One solution is to ask everybody to shut their computer down every time an update of the server is planned. But as the users are, by design, very lazy and don't really care about this kind of things. It isn't an acceptable solution.
Does anyone know if there is a way for stopping Outlook to ask about credential when it loose temporarily the connection with Exchange ?
Thanks for reading

Hi,
Just checking in to see if the information from Ed (DareDevil57) was helpful. Please let us know if you would like further assistance.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Proxy Server asking for username and password almost 6 times for every page I load, but the same doesn't happen with other browsers like chrome

The same question keeps popping up again and again "The proxy moz-proxy://proxy.iitm.ac.in:3128 is requesting a username and password. The site says: "moz-proxy://proxy.iitm.ac.in:3128""
Even after i give the right details, it asks me like 5 more times before it completely loads the page. Some times it happens only 2 times.
With other browsers like chrome, it asks only in the beginning. it doesn't occur after that.
This started occurring only recently. i upgraded to firefox 9.0 and it functioned properly for more than 12 hours before it started occuring. i tried downgrading back to 8.0.1 but the problem still continued.

i'm afraid i need to use proxy settings to connect to internet. The settings are all fine because it used to work properly all this time. i specify the proxy address and the port, which is correct, i am very confident. it is so because the page actually loads on firefox, but not before it asks for my user name and password for it a lot of times, and for every page. for other browsers, it asks only in the beginning, that is, when i start the browser.
i've put three pics here. under the first two settings, the third image showing the user name and password thingy popping up. this happens a lot of times for every page.

Crystal report parameter asking for DB login

Hi All,
I have created a crystal report in 2008, in my crystal reprot i have a command which gives me 2 columns and a stored proced which give me 6 columns and then i joined them in link tab.
Now in my report i have created a parameter using one the column from command. The data source for both are same database but diffrent tables.
When i exported the report to enterprise and try to schedle it, for parameter option when i try to edit the parameter it promps me for database logon every time (i.e. every time i edit parameter it promps for Db logon) and i have already provide DB creds in database information page.
BOXI R3.1 with no FP.
please suggest on this.
Thanks,
Nimesh.

In CMC, what option did you select on the Database Configuration section of the report properties?
If it is " Prompt users for database credentials", then it'll prompt users for credentials whenever the report is run.
If it is set to " use same credentials as above" (not exact wording), then it don't ask for credentials.

One of AD RMS cluster servers always asks for credential

I have created AD RMS cluster on Windows Server 2012 R2.
and I have configured NLB between the two servers but when users try to connect to second cluster server they cannot connect to it as it always ask for credentials.
I have put cluster name as trusted site on all clients.
Also I have noticed that AD RMS logging service doesn't exist any more on Windows Servers 2012 R2.
a

Hi Ahmed-Mahmoud,
Please try to populate the IE local intranet sites with the appropriate URLs, credentials not automatically sent to RMS unless cluster/server names are in the IE Local Intranet
sites.
Active Directory RMS Stop entering user's credential when opening files
https://social.technet.microsoft.com/Forums/en-US/2af38d78-bc2f-4882-ab4f-b155f08c30c1/active-directory-rms-stop-entering-users-credential-when-opening-files?forum=rms
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Crystal Reports Addon asking for Restart problem

Hi,
I am using SAPB1 2005B PL 27.
i am using .Net 2.0
system is Windows 2003 Server R2 SP1
by using B1DE 2005,
I created addon for Crystal Reports Installation.
crystal reports are developed in Crystal Reports 10.
while installing,
1. Menus are adding perfectly
2. if i try to click the menu(means Report) , it is asking for Restart the Addon.
i installed the license perfectly. is there any Configuration problems?
plz help me asap.
Regards,
Anand.

It could be a problem with the code in your AddOn. Since you can see the menu's it an indication that the AddOn was started.
I suggest you to check your code. Also post the portion of the code to the SDK forum where development related topics are discussed.
Suda

Unable to open a report and asking for user credentials

Hi,
when i am trying to open a crystal report, i am asking for user credentials and my URL is directed to the below URL
http://hostname/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FSERVICE%3D%252FOpenDocument%252FappService.do%26OBJIDS%3D20016421%26backUrl%3D%252Fcontent%252Fview.do%26PREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26CONTAINERID%3D6424083%26backContext%3D%252FPlatformServices%26LOC%3Den%26APPKIND%3DInfoView%26PVL%3Den%26ACTID%3D280%26service%3Dtimeout&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=servername%3A6600&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
Please help me on this

Hi,
This is happening to all of the users. And this kind of behaviour is happening frequently to most of the users but as for me and some of us this is not happening frequently.
And we are using Crystal Reports 2008 ie. CR12.
-VinodC

Why do the options for a new Home page always appear first when I sign in when I already have a Home page?

The screen page for creating a new Firefox Home page always shows up first when I sign on.....but, I already have a Home page and have to click again to get there.
How can I get Firefox to go directly to my actual Home page?

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

Crystal reports report allways asks for db creditentials, please vertify!

Hi all, just upgraded couple of test servers up to pl 19 and pl 19 hf1
my problem is, if i create a report (the ones allready in the b1 database still work as should), so this new report asks for creditentials every time on running.
Reproduce:
Upgrade pl 19, create a new report, save it inside SAP, run it from sap, and i get a box prompting for db creditentials.
Help me vertify this issue!
Please test your pl 19 systems with compleatly new riports (even the simplest report will do)
Thank you all!
Regards,
D

For Further reference only:
PL19 indeed has this bug, PL20 is promised to fix it (i didn't have time to check this... but there are 2 notes about this so it is probably fixed)

Interactive Rating Stars for XSLTListView Blog Home Page

Hi All, using the OOTB blog site template, I'd like to modify the OOTB List View Web Part (using SharePoint Designer) on the home page of the blog site to also include interactive rating stars next to each entry's title. So far I've been able to get the
stars to show up but I haven't been able to figure out how to make it clickable/interactive. Any ideas/suggestions? Thanks!http://www.henryong.com

Hi Henry,
Please follow the steps given below
1. Create a custom blog.xsl file and dump the below code in the file. Upload the blog.xsl file to a style library.
<xsl:stylesheet xmlns:x="http://www.w3.org/2001/XMLSchema" xmlns:d="http://schemas.microsoft.com/sharepoint/dsp" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal" xmlns:o="urn:schemas-microsoft-com:office:office" ddwrt:ghost="show_all">
<xsl:include href="/_layouts/xsl/blog.xsl"/>
<xsl:include href="/_layouts/xsl/internal.xsl"/>
<xsl:param name="AllRows" select="/dsQueryResponse/Rows/Row[$EntityName = '' or (position() >= $FirstRow and position() <= $LastRow)]"/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:template match="/" ddwrt:ghost="hide">
<xsl:choose>
<xsl:when test="$RenderCTXOnly='True'">
<xsl:call-template name="CTXGeneration"/>
</xsl:when>
<xsl:when test="($ManualRefresh = 'True')">
<xsl:call-template name="AjaxWrapper" />
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates mode="RootTemplate" select="$XmlDefinition"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="View_DefaultSummary_RootTemplate" mode="RootTemplate" match="View[@BaseViewID='0']" ddwrt:dvt_mode="root" ddwrt:ghost="hide">
<xsl:apply-templates select="." mode="full" />
</xsl:template>
<xsl:template match="View[@BaseViewID='0' and List/@TemplateType='301']" mode="full" ddwrt:ghost="hide">
<xsl:apply-templates select="." mode="RenderView" />
<xsl:apply-templates mode="footer" select="." />
</xsl:template>
<xsl:template match="View" mode="RenderView" ddwrt:ghost="hide">
<xsl:variable name="ViewStyleID">
<xsl:value-of select="ViewStyle/@ID"/>
</xsl:variable>
<xsl:variable name="HasExtraColumn" select="$TabularView='1' and $MasterVersion=4 and ($ViewStyleID = '' or $ViewStyleID = '17')"/>
<xsl:if test="Aggregations[not(@Value='Off')]/FieldRef">
<tr>
<xsl:if test="$HasExtraColumn">
<td/>
</xsl:if>
<xsl:if test="$InlineEdit">
<td width="1%"/>
</xsl:if >
<xsl:apply-templates mode="aggregate" select="ViewFields/FieldRef[not(@Explicit='TRUE')]">
<xsl:with-param name="Rows" select="$AllRows"/>
<xsl:with-param name="GroupLevel" select="0"/>
</xsl:apply-templates>
</tr>
</xsl:if>
<xsl:variable name="Fields" select="ViewFields/FieldRef[not(@Explicit='TRUE')]"/>
<xsl:variable name="Groups" select="Query/GroupBy/FieldRef"/>
<xsl:variable name="Collapse" select="Query/GroupBy[@Collapse='TRUE']"/>
<xsl:variable name="GroupCount" select="count($Groups)"/>
<xsl:for-each select="$AllRows">
<xsl:variable name="thisNode" select="."/>
<xsl:if test="$GroupCount > 0">
<xsl:call-template name="GroupTemplate">
<xsl:with-param name="Groups" select="$Groups"/>
<xsl:with-param name="Collapse" select="$Collapse"/>
<xsl:with-param name="HasExtraColumn" select="$HasExtraColumn"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="not(not($NoAJAX) and not($InlineEdit) and $Collapse and $GroupCount > 0)">
<xsl:apply-templates mode="Item" select=".">
<xsl:with-param name="Fields" select="$Fields"/>
<xsl:with-param name="Collapse" select="$Collapse"/>
<xsl:with-param name="Position" select="position()"/>
<xsl:with-param name="Last" select="last()"/>
</xsl:apply-templates>
</xsl:if>
</xsl:for-each>
<xsl:if test="$InlineEdit and not($IsDocLib) and $ListRight_AddListItems = '1'">
<xsl:call-template name="rowinsert">
<xsl:with-param name="Fields" select="$Fields"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template mode="Item" match="Row[../../@TemplateType='301' and (../../@BaseViewID='0' or ../../@BaseViewID='7' or ../../@BaseViewID='8' or ../../@BaseViewID='9')]" ddwrt:ghost="" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:param name="Fields" select="."/>
<xsl:param name="Collapse" select="."/>
<xsl:param name="Position" select="1"/>
<xsl:param name="Last" select="1"/>
<xsl:variable name="ShowBody">
<xsl:if test="../../@BaseViewID='0' or ../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="ShowTopDate">
<xsl:if test="../../@BaseViewID='0' or ../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="ShowDrafts">
<xsl:if test="../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="thisNode" select="."/>
<xsl:if test="$ShowDrafts=1 or $thisNode/@_ModerationStatus. = 0">
<table>
<tr class="ms-blogpostdatecol" valign="top">
<td class= "ms-leftblogdate" style="width: 93px">
<div id="PostDateTopBox{generate-id()}" class="ms-postcalendardateboxtop">
</div>
<xsl:if test="$MasterVersion = 4">
<div id="PostDateBottomBox{generate-id()}" class="ms-postcalendardateboxbottom" style="overflow-x:hidden">
<div>
<xsl:value-of select="$thisNode/@PublishedDate.MonthDayOnly" disable-output-escaping="yes" />
</div>
</div>
</xsl:if>
<xsl:if test="$MasterVersion != 4">
<div id="PostDateBottomBox" class="ms-postcalendardateboxbottom" style="overflow-x:hidden;font-size:0.8em">
<div>
<xsl:value-of select="$thisNode/@PublishedDate.MonthDayOnly" disable-output-escaping="yes" />
</div>
</div>
</xsl:if>
</td>
<td class = "ms-rightblogpost">
<table dir="None" cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td class="ms-PostTitle">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}">
<xsl:apply-templates select="$Fields[@Name='Title']" mode="PrintField">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</a>
</td>
<xsl:if test="../../@BaseViewID='7'">
<xsl:if test="($thisNode/../@value.listpermission.EditListItems = '1' and (($thisNode/../@value.listpermission.ManageLists = '1') or ($XmlDefinition/List/@WriteSecurity = '2' and $thisNode/@Author.id = $Userid) or ($XmlDefinition/List/@WriteSecurity != '2')))">
<td align="right" class="ms-blogedit">
<a href="javascript:" onclick="javascript:ShowPopupDialog('{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/EditPost.aspx?ID={$thisNode/@ID}&Source={$HttpVDir}%2Fdefault.aspx');">
<xsl:value-of select="'Edit'" />
</a>
</td>
</xsl:if>
</xsl:if>
</tr>
</tbody>
</table>
<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name!='Title' and @Type!='Note' and not(@Name='PostCategory' and $thisNode/@PostCategory='')">
<xsl:choose>
<xsl:when test="@Name='Author'">
<span class="ms-postfootercolor">
<xsl:value-of select="'by '"/>
</span>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@Author.span" disable-output-escaping="yes" />
</xsl:when>
<xsl:when test="@Name='PublishedDate'">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;&nbsp;</xsl:text>
<span class="ms-postfootercolor">
<xsl:value-of select="'on'"/>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@PublishedDate" />
</span>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
<div>
<xsl:for-each select="$Fields">
<xsl:if test="@Name='PostCategory' and not ($thisNode/@PostCategory='')">
<xsl:value-of select="'Category'" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">:&nbsp;</xsl:text>
<xsl:apply-templates select="$Fields[@Name='CategoryWithLink']" mode="Computed_body">
<xsl:with-param name="thisNode" select="$thisNode"/>
</xsl:apply-templates>
</xsl:if>
</xsl:for-each>
</div>
</div>
<xsl:if test="$ShowBody=1">
<div class="ms-PostBody">
<div>
<xsl:apply-templates select="$Fields[@Name='Body']" mode="PrintField">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</div>
</div>
</xsl:if>
<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name ='Permalink' or @Name ='EmailPostLink' or @Name ='NumCommentsWithLink'">
<xsl:choose>
<xsl:when test="@Name='Permalink' or @Name='EmailPostLink' or @Name='NumCommentsWithLink'">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
<xsl:if test="@Name='Permalink' or @Name='EmailPostLink'">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;|&nbsp;</xsl:text>
</xsl:if>
</xsl:when>
<xsl:when test="$thisNode/@*[name()=current()/@Name]!=''">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;|&nbsp;</xsl:text>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
</div>

<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name ='AverageRating'">
<xsl:choose>
<xsl:when test="@Name='AverageRating'">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
</div>

</td>
</tr>
</table>
</xsl:if>
</xsl:template>
<xsl:template name="FieldRef_Text_body.Title" ddwrt:dvt_mode="body" match ="FieldRef[@Name='Title']" mode="Text_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<xsl:choose>
<xsl:when test="@AutoHyperLink='TRUE'">
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping ="yes"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="FieldRef_Note_body.Body" ddwrt:dvt_mode="body" match="FieldRef[@Name='Body']" mode="Note_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<div dir="{@Direction}" class="ms-rtestate-field">
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping="yes"/>
</div>
</xsl:template>
<xsl:template name="FieldRef_Blog_Permalink_Computed_Body.Permalink" match="FieldRef[(@ID='a194bd80-24e6-e71b-b235-3a283b9f1e71') and @Name='Permalink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_permlink_alt}" style="left:-0px !important;top:-412px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_permlink_alt}" class="imglink" longDesc="{$thisNode/../@resource.wss.posts_permlink_alt}" />
</a>
</span>
</span>
</xsl:template>
<xsl:template name="FieldRef_Blog_EmailPostLink_Computed_Body.EmailPostLink" match="FieldRef[(@ID='1c216b4a-13a6-cd5c-b37b-3776b29ff92e') and @Name='EmailPostLink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="javascript:navigateMailToLink('{$HttpVDir}%2F{$thisNode/../@resource.wss.lists_Folder}%2F{$thisNode/../@resource.wss.blogpost_Folder}%2FPost.aspx?ID%3D{$thisNode/@ID}')" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" style="left:-0px !important;top:-267px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" class="imglink" longDesc ="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" />
</a>
</span>
</span>
</xsl:template>
<xsl:template name="FieldRef_Blog_NumCommentsWithLink_Computed_Body.NumCommentsWithLink" match="FieldRef[(@ID='65746b4a-13a6-a72c-b815-3a96b29f1f9e') and @Name='NumCommentsWithLink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" style="left:-0px !important;top:-396px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" class="imglink" longDesc="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" />
</a>
</span>
</span>
<span>
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@NumComments" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'Comment(s)'"/>
</a>
</span>
</xsl:template>
<xsl:template match="View[List/@TemplateType='301' and (@BaseViewID='0' or @BaseViewID='8' or @BaseViewID='9')]" mode="footer" ddwrt:ghost="hide">
<xsl:call-template name="pagingButtons" />
<xsl:if test="List/@EnableSyndication=1">
<div class="ms-blogrss" id="BlogRSSMain{generate-id()}">
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/_layouts/listfeed.aspx?List={$List}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$Rows/@resource.wss.blog_rss_link}" style="left:-0px !important;top:-475px !important;position:absolute;" title="{$Rows/@resource.wss.blog_rss_link}" align="absmiddle" />
</a>
</span>
</span>
<a href="{$HttpVDir}/_layouts/listfeed.aspx?List={$List}">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'RSS Feed'"/>
</a>
</div>
<script type="text/javascript">
var divBlogRSSNav = document.getElementById("BlogRSSNav");
var divBlogRSSMain = document.getElementById("BlogRSSMain");
if (divBlogRSSNav != null && divBlogRSSMain != null)
divBlogRSSNav.innerHTML = divBlogRSSMain.innerHTML;
divBlogRSSNav.className = "ms-blogrssnav";
divBlogRSSMain.removeNode(true);
</script>
</xsl:if>
<xsl:if test="$EnableAlert">
<div class="ms-blogrss" >
<a href="{$HttpVDir}/_layouts/SubNew.aspx?List={$List}&Source={$HttpVDir}%2Fdefault.aspx" longDesc="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}">
<img src="/_layouts/images/menualert.gif" alt="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}" title="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}" align="absmiddle" height="16px" width="16px"/>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'Alert Me'"/>
</a>
</div>
</xsl:if>
</xsl:template>
<xsl:template name="pagingButtons" ddwrt:ghost="hide">
<xsl:choose>
<xsl:when test="$XmlDefinition/List/@TemplateType = 106 and $XmlDefinition/@RecurrenceRowset='TRUE'">
<xsl:if test="$dvt_nextpagedata or $dvt_prevpagedata">
<xsl:call-template name="CalendarExpandedRecurrenceFooter"/>
</xsl:if>
</xsl:when>
<xsl:otherwise>
<xsl:if test="$XmlDefinition/RowLimit[@Paged='TRUE']">
<xsl:call-template name="CommandFooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
</xsl:call-template>
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="CommandFooter" ddwrt:ghost="hide">
<xsl:param name="FirstRow" select="1"/>
<xsl:param name="LastRow" select="1"/>
<xsl:param name="dvt_RowCount" select="1"/>
<xsl:if test="$FirstRow > 1 or $dvt_nextpagedata">
<xsl:call-template name="Navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="Navigation" ddwrt:ghost="hide">
<xsl:param name="FirstRow" select="1"/>
<xsl:param name="LastRow" select="1"/>
<xsl:param name="dvt_RowCount" select="1"/>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$EntityName = '' or $LastRow < $RowTotalCount">
<xsl:value-of select="$LastRow"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RowTotalCount"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"/>
</xsl:variable>
<table width="100%" border="0" cellpadding="0" cellspacing="0" class="ms-bottompaging">
<tr>
<td class="ms-bottompagingline1">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
<tr>
<td class="ms-bottompagingline2">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
<tr>
<td class="ms-vb" id="bottomPagingCell{$WPQ}">
<xsl:if test="not($GroupingRender)">
<xsl:attribute name="align">center</xsl:attribute>
</xsl:if>
<table>
<tr>
<xsl:if test="$dvt_firstrow > 1">
<td>
<a>
<xsl:choose>
<xsl:when test="$dvt_RowCount = 0 and not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$ShowWebPart"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idRewind}" />
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idRewind}" />
</xsl:when>
<xsl:otherwise>
<xsl:variable name="RealRowLimit">
<xsl:choose>
<xsl:when test="$XmlDefinition/Query/GroupBy[@Collapse='TRUE']/@GroupLimit">
<xsl:value-of select ="$XmlDefinition/Query/GroupBy[@Collapse='TRUE']/@GroupLimit"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select = "$XmlDefinition/RowLimit"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:choose>
<xsl:when test="not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$dvt_prevpagedata"/><xsl:value-of select="$ShowWebPart"/>\u0026PageFirstRow=<xsl:value-of select="$FirstRow - $RealRowLimit"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
</xsl:when>
<xsl:otherwise>
<xsl:attribute name="href">
javascript: <xsl:call-template name="GenFireServerEvent">
<xsl:with-param name="param" select="concat('dvt_firstrow={',$FirstRow - $XmlDefinition/RowLimit,'};dvt_startposition={',$dvt_prevpagedata,'}')"/>
</xsl:call-template>
</xsl:attribute>
</xsl:otherwise>
</xsl:choose>
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idPrevious}" />
</xsl:otherwise>
</xsl:choose>
</a>
</td>
</xsl:if>
<xsl:if test="$FirstRow <= $LastRowValue">
<td class="ms-paging">
<xsl:value-of select="$FirstRow" /> - <xsl:value-of select="$LastRowValue" />
</td>
</xsl:if>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0">
<td>
<a>
<xsl:choose>
<xsl:when test="not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$dvt_nextpagedata"/><xsl:value-of select="$ShowWebPart"/>\u0026PageFirstRow=<xsl:value-of select="$NextRow"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
</xsl:when>
<xsl:otherwise>
<xsl:attribute name="href">
javascript:
<xsl:call-template name="GenFireServerEvent">
<xsl:with-param name="param" select="concat('dvt_firstrow={',$NextRow,'};dvt_startposition={',$dvt_nextpagedata,'}')"/>
</xsl:call-template>
</xsl:attribute>
</xsl:otherwise>
</xsl:choose>
<img src="/_layouts/{$LCID}/images/next.gif" border="0" alt="{$Rows/@tb_nextpage}" />
</a>
</td>
</xsl:if>
</tr>
</table>
</td>
</tr>
<tr>
<td class="ms-bottompagingline3">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
</table>
<xsl:if test="not($GroupingRender)">
<script>
var topPagingCell = document.getElementById("topPagingCell<xsl:value-of select='$WPQ'/>");
var bottomPagingCell = document.getElementById("bottomPagingCell<xsl:value-of select='$WPQ'/>");
if (topPagingCell != null && bottomPagingCell != null)
topPagingCell.innerHTML = bottomPagingCell.innerHTML;
</script>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
2. Edit the blog post xslt list view webpart on the home page of blog site and specify the custom xsl path, under Miscellaneous -> XSL Link and click ok.
3. After the page is render it should display like the image given below
http://moss-solutions.blogspot.com/

Report Viewer asking for Login credentials on Non-Development PC

I have created several reports within Crystal 2008(using the push method). I run these reports in a VB6 application using the Report Viewer. Reports without sub-reports will run on both the development and non-development PC. If I try to run a report with a sub on a non-development PC it will prompt the user for login credentials.
I can run the same report(with a sub) in development or on a PC with Crystal 2008 and Visual Basic installed. I have created a setup.exe to install this on the pc and included both the Crystal runtime 2008 and Crystal Report Viewer 2008 as prerequisites.
Any help would be appreciated

We created a form in Visual Studio 2008 that holds the Crystal Report Viewer. We then used Interop to wrap the assembly into a usable reference for the VB6 application.
This was working fine when we were using the pull method for the report but once we changed the code to use the push method reports with subs will ask for a login. No matter what is entered the report will not print to the screen. The reports without a sub will print just fine.
Not sure what to look for next?
Thanks for your quick response.

Report Server asking for credential as home page

Similar Messages

Maybe you are looking for