Report Server gives 'Documents contains No DATA'

When I try to execute the reports on large volume of data after
some time the 'Documents contains No Data' is displayed on the
browser. Whereas the works on client server. I am using reports 3
and web app server 3.0.1.0.1 and the reports are called on
browser netscape 4.5. Any suggestions ?
null

The collocated statement is for the service not the database on Standard Edition. Monitoring in Lync 2013 is a service on the Front End instead of a separate server. 
"By default, the SQL Server Express back-end database is collocated on the Standard Edition server. You cannot move it to a separate computer. With one exception, you cannot collocate other databases on the Standard Edition server. If you choose to deploy
Persistent Chat Server on a Standard Edition server, you can collocate the Persistent chat database and the Persistent Chat Compliance database on the same Standard Edition server"
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Similar Messages

  • IWS 6.0 SP1, document contained no data

    Hello all,
    I'm working on iWS6.0 SP1 on Solaris 8 and when I start the administration
    console (Netscape Communicator, port 7777) I see this Netscape error: "the
    document contained no data. Try again later or contact the server
    administrator", and the adminitratotion server restarts. Log errors shows
    this output:
    [13/Dec/2001:09:11:05] warning ( 680): for host 194.158.64.17 trying to GET
    /https-admserv/icons/dgLeftTab.gif, send-file reports: error sending
    /usr/iplanet/ws6.0/bin/https/admin/icons/dgLeftTab.gif (Operation not
    applicable) status=1:5
    [13/Dec/2001:09:11:05] warning ( 680): for host 194.158.64.17 trying to GET
    /https-admserv/icons/spacer.gif, send-file reports: error sending
    /usr/iplanet/ws6.0/bin/https/admin/icons/spacer.gif (Operation not
    applicable) status=1:5
    [13/Dec/2001:09:11:10] failure ( 655): Child process admin thread is
    shutting down
    [13/Dec/2001:09:11:10] info ( 684): Installing a new configuration
    [13/Dec/2001:09:11:10] info ( 684): [LS ls1] http://www.govern.ad, port 7777
    ready to accept requests
    Thanks in advance

    Greg Redman wrote:
    I upgraded from iWS 4.1 SP7 to 6.0 back in August. After some
    migration problems with config files were resolved, everything was up
    and running. No changes were made to the ACL or server.xml files to
    get everything running. Because of the migration problems, however,
    we went back to iWS 4.1 and waited for the SP1 release.
    I just went through the SP1 migration and everything is up and running
    except the none of my images are showing up on the HTML pages being
    served. For every "GET" of an image file I'm seeing an error in the
    error log the says ...(no access rights). Has something changed in
    SP1 that requires ACL type changes ?Can you show us an example of the error? What about the request/response
    (what's being sent back to the browser)?
    Joe McCabe Some men are alive today simply because it is against the
    Moz' Pit law to kill them. -- Ed Howe

  • Error message: "This document contains photoshop data which appears to be damaged."

    I saved the file I was working on by choosing "Save" from the "File" menu. Unfortunately after 10 min as I saved my work  my PC had "issues" and needed to be manually shut off. I was trying to open the psd file after restarting my computer and I get this error message: "This document contains photoshop data which appears to be damaged. Continue and ignore the photoshop data?" I clicked okay and then I get just a black screen. No Layers or any pictures.
    I have tried to preview in Graphic Converter, in Illustrator, in ACDSee, etc... Nothing... I just get a black screen. Also, I have tried file recovery programs: Stellar Phoenix PSD Repair V1.0 and Advanced PSD Repair v1.4
    The program Stellar Phoenix PSD Repair V1.0 was able to recover only BMP picture 3.4 KB, it is so tiny that you can't see anything on the picture.
    I also have tried to install plugin "psdrecover", for Adobe Photoshop. Unsuccessfully for some reason. The plugin does not want to be installed into the "plugins" folder. I did follow the instructions.
    I am using Photoshop 6 version and Windows 7 operating System.
    I am in dire need of help. I've been working on it for days. Is there any way to recover that file back?

    I hate to be the bearer of bad news, but you're likely out of luck.  We almost never hear of anyone recovering image data from a damaged PSD.
    Some thoughts:
    1.  Set up backups.
    2.  Get in the habit of saving your master file in several different locations as you work on it.
    3.  Consider upgrading to Photoshop CS6, which auto-saves your work in the background.  I'm not sure whether it would have recovered the data in your particular case, but it's possible.
    4.  Don't feel bad - go back and do the image again, and I'll bet it comes out even better in less time.
    -Noel

  • Error when creating table (Document contains no data)

    Hi,
    I've installed htmldb 2.0 and after playing with it for a while, everything seems to be ok, except
    for table creation. No matter I use the sql command console or the object creation wizard, the
    situation is the same: i can arrive until the last confirmation page, and after submitting the browser
    complains about a page with no data (Document contains no data).
    I can create other things, such as views, functions, sequences, even applications. Is just table the one giving problems. Can somebody tell me where are the relevant logs, in order to trace better the situation? Or, if you have any other suggestion (maybe I missed something during the installation, or things like that).
    Thanks in advance.
    salu2
    dario estepario ...

    Sure, this is part of the weird thing: nothing is displayed when this error happens. However, yesterday, a friend of mine made the same test (with another browser) and I saw some messages like this ones on the error_log*:
    [Tue Nov 22 15:12:01 2005] [error] [client 201.138.102.50] [ecid: 1132693921:192.168.1.1:24300:0:155,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-500 Error Reading Data from Client!!
    At least, they are a http-500 errors ... while in my case, I can not receive any answer at all.
    But this was yesterday, today ... every time I reproduce the situation, the error_log does not move.
    Regards,
    PS: Another point: I can create the table importing data.

  • Report server gives error

    i have installed oracle 9i AS (EE)on NT,
    Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
    i want to display reports through JSP How it can be done? Does anybody knows it?
    Naresh
    null

    Please check at http://<server>/dev60html/runrep.htm for follwings :
    01. your test.rdf must be in report60 folder
    02. your db must contain scott user
    03. connect string must be tested and give the same inplace of test
    04. your webhost may contain a dot, please check this should be the same as yours
    hope this will help
    bye !

  • Oracle Report Server gives java error message

    Hi All,
    We have an oracle report server (or service) in Oracle application server 10gR2 running in Red Hat Enterprise Linux 4.5. And it was working fine.
    But recently it gives some error message in the terminal like below.
    java.lang.Exception
    at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
    at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
    at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
    at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
    java.lang.Exception
    at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
    at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
    at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
    at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
    java.lang.Exception
    at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
    at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
    at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
    at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
    java.lang.Exception
    at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
    at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
    at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
    at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
    java.lang.Exception
    at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
    at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
    at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
    at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
    When I restart the report server it works fine for a while and the error message appears again.
    Dear Experts,Please response early.

    Please check at http://<server>/dev60html/runrep.htm for follwings :
    01. your test.rdf must be in report60 folder
    02. your db must contain scott user
    03. connect string must be tested and give the same inplace of test
    04. your webhost may contain a dot, please check this should be the same as yours
    hope this will help
    bye !

  • Report refresh does not contain correct data

    Hi all,
    I'm having a problem with an interactive report. this report contains checkboxes for each row.
    When clicking the submit button, a process is called which changes the status of the checked records.
    This status change should cause the IR to not query these records anymore after the submit, but they still appear even though i did a commit after the proces.
    When i refresh the page the correct records are removed from the report.
    Is this normal because i thought the page processes are completed before branching is executed.
    Grtz,
    Mario

    my mistake, i was doing a query with sysdate in the where clause, but when using systimestamp this problem was solved.

  • F.13 Clearing Documents contain no data

    Hi,
    I have carried out F.13 transaction to clear some customer accounts.
    However, the system displays that it has created a few clearing documents in the output.
    But when i see the document postings, i see no data in the documents. It says List is empty.
    Can anyone please clarify why the sysem is posting the null documents with the document numbers.
    Thanks,
    srikanth.

    Dear,
    Yes, It may wonder you when you display the cleared document and it has no line items generated because balance of both the item is zero...
    For example.....
    Debit entry in customer is Rs 1000 and it cleared by a creadit entry in the same customer of Rs 1000 so system will not generate any line item while clearing because both are knocked off...
    Do not worry, nothing has gone wrong....its correct behaviour of the standard system..
    Regards,
    Chintan Joshi

  • OT:  The Document Contains No Data

    anybody getting this when trying to access the discussions?
    hate to post off topic, but there is no way to communicate with anyone at Apple to troubleshoot the issue.
    also others experiencing interminable waits with broadband to load a page?

    yeah, i have been getting this off and on. I just have to come back later and read or reply. it just happened to me half an hour ago.
    sometimes the pages just don't load.
    you can't expect much out of apple these days, they are just too occupied with getting ipods out for Christmas.

  • ITunes U reports contain no data: PSM public site

    For over two months, since the Queens College public site went live on PSM, the iTunes U reports we receive have contained no data. Is any other public site on PSM having this issue? we have not been able to get a response to our inquiries regarding this matter.
    SteveL
    CUNY

    Are you seeing blank data in a report with "iTPSM: Usage report for yoursitename-dz year-month-day" as the subject line? iTunes U Public Site Manager weekly reports will have start with ITSPM instead of iTunes U and include -dz in the site name. This thread has further information - http://discussions.apple.com/thread.jspa?messageID=13000515&#13000515
    -Thanks

  • Campaing Report that gives me both start and end dates

    hello topliners,
    I am looking to pull a report analysis of all the campaigns to get their start date and their end date. But all the reports only give me the start date, is there a way to get the end date to show on the report?
    Thanks

    Hi,
    I gueass the best solution is to use PV1A t-code.
    You can write an LSMW for this t-code if the number of business events to be maintained is huge.
    Regards,
    Dilek

  • Report server times out for 3 mb of excel

    I'm using a report viewer control in our application and it is working fine while displaying data and exporting it in different format by clicking export button provided by the report viewer.
    I have another page but there will be a normal asp button to generate same report. so i am using report viewer control and calling the public method .Render exposed by the report viewer.
        byte[] bytes = rptViewver.ServerReport.Render("Excel", deviceInfo, out mimeType, out encoding, out extension, out streamids, out warnings);
    this time i am getting below exception.
        Exception :System.Net.WebException: The request failed with HTTP status 504: Connection Timed Out.
        at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
        at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
        at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
        at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
        at Microsoft.Reporting.WebForms.ServerReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
        at Reports_GenerateReport.DisplayReport(Boolean IsExport) in f:\Sunil\View Reports\Login\Reports\GenerateReport.aspx.cs:line 1702
    My doubt is like, why it is getting time outs while leveraging same report viewer control internally.
    any suggestions to get rid of this?

    Hi sGudivada,
    Please check the ExecutionLog view in ReportServer database to learn more information about the report. The report server execution log contains information about the reports that execute on the server or on multiple servers in a scale-out deployment. For
    example:
    TimeDataRetrieval fields. Record number of milliseconds spent retrieving the data.
    TimeProcessing fields. Record number of milliseconds spent processing the report.
    TimeRendering fields. Record number of milliseconds spent rendering the report.
    Reference:
    http://msdn.microsoft.com/en-us/library/ms159110(v=sql.110).aspx
    There is an article about troubleshooting report performance, you can refer to it.
    http://msdn.microsoft.com/en-us/library/bb522806(v=sql.105).aspx
    Thanks,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Crystal Report Server XI R2 - Upgrade MySQL to 5.0 or 5.1?

    Although SP4 for Crystal Report Server XI R2 contains mySQL v 4.1.23, there are security vulnerabilities which are only addressed in 4.1.24 and 4.1.25.  These versions are not in release in binary form from mysql.com, as 4.1 is no longer supported.
    To address the security vulnerabilities, an update of mySQL to 5.0 or 5,1 may be required, but a straight upgrade from 4.1 to either of these versions does not seem to work - CMS cannot connect to the new database version.
    Can anyone provide some guidance on how to patch mySQL from 4.1 to 5.0 or 5.1 for Crystal Report Server XI R2, or whether there is another way of addressing the security vulnerabilities in 4.1.23?
    Thanks
    Paul

    Answered my own question.  Managed to upgrade to 5.0 following this process, but follow these instructions with care...
    1.  Stop all CMS services in Config Manager.
    2. Go to Add/Remove programs and click "change" for Crystal Reports Server XI.  Click on "Modify" then change the entry for MySQL4.1.13a to "Entire Feature will be unavailable" (from Enterprise -> Server Components -> Servers - > Central Management Server).  This will remove the existing mySQL version and any data/license key information/customisation, so be wary.
    3. Install the desired version of mySQL.
    4. Use the MySql command line to create a new database - "create DATABASE BOE115;"
    5. In the Central Config Manager, select the CMS and display its properties.  Select the Dependencies tab and remove the old version of mySQL and add the new version.  Click on the Config tab, then Select Datasource.  Select mySQL driver, then complete the details for the newly created database.  Once complete it will still produce an error, at which point you need to select the options to Re-create the Current Datasource.
    6. Once the datasource is sucessfully recreated, restart the Crystal service in the Config Manager.
    7. Open the Config tool, and add your license key. Then Re-Enable all the servers within the Servers page.
    8.  Any other customisation or preferences would need to be re-applied.
    This worked for me, but obviously take care as your existing mySQL database will be completely removed during the process.

  • Error in Accessing the Report Server URL

    Hi All,
              I am trying to access the Report Server URL in PowerPivot.But facing below issue .Can any one help me how can I solve the issue
    Thanks,  
    Sid

    Hi Visakh,
                    Yes,The user is holding the permission as "Global User" in sql.Hope you help me in solve this issue
    Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .
    Hi siddiqali,
    According to the screenshot you posted above, the use account didn't have sufficient permission to open the report, please check the following prerequisites before you perform the action:
    You must use a report definition (.rdl) file as a data source. Importing from a report model is not supported.
    You must have permission to open the report under your Windows user account, and you must know the address of the report or the report server that hosts it. You can check your permissions by trying to open the report in a Web browser first.
    If the report opens, it confirms that you have sufficient permissions and the correct URL.
    Reporting Services must be version SQL Server 2008 R2 or SQL Server 2012. Those versions include the data feed export feature that streams report data in the XML data feed format. You can identify the report server by the Export as Data Feed option
    that appears in the report toolbar when you open the report in browser:
    For detail information, please see:
    Import Data from a Reporting Services Report:
    http://technet.microsoft.com/en-us/library/gg413491.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • Urgent !! Error related to NT service for Report Server in 6i

    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ashwani Dave ([email protected]):
    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards<HR></BLOCKQUOTE>
    I think something is either active or hung listening on the same socket Oracle Reports is trying to run on. Remove the conflict by using another port. If Oracle Reports/Forms has crashed and hung the socket the only easy way to fix the problem is to three finger salute the machine.

Maybe you are looking for

  • Ipod won't sync on Original PC

    My son has ipod 2nd gen. All purchases for my children are on my account on house laptop. Everything worked fine until last night. Laptop does recognise Ipod but will not sync. Syncing process starts but stops pretty quickly with new apps and music n

  • PAL external display for powerpoint

    I will be traveling to the UK and will need to display several powerpoint slides on an external PAL CRT monitor. I don't have the choice of an RGB display. Can I set the display to PAL in preferences and feed the PAL CRT from my G4 Powerbook? G5 DP 2

  • Quicktime Movies on published iWeb require right click to start???

    I recently added several videos to my iWeb site. While in iWeb, the movies play fine with a normal left-click of the mouse on the play icon below the "movie screen". However, when I publish my site and go to my URL, I along with anyone else accessing

  • OSD SCCM 2012 R2: 0x80004005: app install failed

    Hi, I have this application in a simple task sequence which fails to install (error 0x80004005). The application itself installs correctly in a windows session. It has "Allow this application to be installad from the Install Application task sequene

  • IWeb '09 links jacked up....

    Trying to create a website/resume. When others or myself, follow the links across the top in a sequential order, the links don't work. <Home> <The Man> <The Musician> <The Minister> <Media> <Music> When I click from Musician to Minister...links are d