Report Server Internal Error

While using 9iAS Report Server, we encounter HTTP500: Internal
Server Error problem.
Looking into the Apache error_log, we found the following error:-
[Tue Oct 9 19:29:58 2001] [error] [client 128.1.0.1] Premature
end of script
headers: /export/home2/oracle/6iserver/tools/web60/cgi/rwcgi60
Can some one help?

Similar Messages

Report Server Internal Error During Report Generation

Hi,
We are running 9iAS on Sun Enterprise server. Though we have
successfully installed Form & Report Servers. The Form Server is
running perfectly but while reports are generated from Report
Server, it gives Internal Server Error (HTTP Error Code: 500) --
The server has encountered error or misconfiguration...
Checking the hard disk, we found that the report in PDF file has
been generated but it gives error being delivered.
We have no idea what had happened. Can someone kindly enlight me
some possibilities?

I guess to start with the obvious, IE 500 Internal Server Error resolves to Permission denied: 'GetObject'.
Before chasing that error, what version of CR and .NET are you using?
Once we determine that you are using a version of CR that is actually supported on the OS, we can move on to [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to see if it tell us something - look for "Access Denied" messages.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Server Internal Error 500

Hi!! I have problems, when I execute http://localhost:7501/tools, and the login is administrator.My Error is:Server Internal Error 500 Thanks.

Hi!!
I include my weblogic.log
Thanks for you help !!!
"Michael Girdley" <----> escribió en el mensaje
news:3a96e5cc$[email protected]..
>
>
You should check the server log and console to see what's happening.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Erika Astorga" <[email protected]> wrote in message
news:3a944274$[email protected]..
Hi!! I have problems, when I execute http://localhost:7501/tools, and
the
login is administrator.My Error is:Server Internal Error 500 Thanks.
[error.txt]

SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
    <DataSource Name="DataSource1">
      <DataSourceReference>DataSource1</DataSourceReference>
      <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
    </DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
    <ReportParameter Name="machine_id">
      <DataType>String</DataType>
      <Prompt>machine_id</Prompt>
    </ReportParameter>
    <ReportParameter Name="from_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>From Date</Prompt>
    </ReportParameter>
    <ReportParameter Name="to_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>To Date</Prompt>
    </ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
    <ReportItems>
      <Table Name="table1">
        <DataSetName>Main_Report</DataSetName>
        <TableGroups>
          <TableGroup>
            <Header>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Textbox Name="textbox2">
                          <rd:DefaultName>textbox2</rd:DefaultName>
                          <ZIndex>1</ZIndex>
                          <Style>
                            <TextAlign>Left</TextAlign>
                            <PaddingLeft>2pt</PaddingLeft>
                            <PaddingBottom>2pt</PaddingBottom>
                            <PaddingRight>2pt</PaddingRight>
                            <PaddingTop>2pt</PaddingTop>
                          </Style>
                          <CanGrow>true</CanGrow>
                          <Value>=Fields!syscode.Value</Value>
                        </Textbox>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
              <RepeatOnNewPage>true</RepeatOnNewPage>
            </Header>
            <Grouping Name="table1_Group1">
              <PageBreakAtEnd>true</PageBreakAtEnd>
              <GroupExpressions>
                <GroupExpression>=Fields!syscode.Value</GroupExpression>
              </GroupExpressions>
            </Grouping>
          </TableGroup>
        </TableGroups>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Subreport Name="subreport1">
                      <Parameters>
                        <Parameter Name="machine_id">
                          <Value>=Fields!machine_ip.Value</Value>
                        </Parameter>
                        <Parameter Name="syscode">
                          <Value>=Fields!syscode.Value</Value>
                        </Parameter>
                        <Parameter Name="from_date">
                          <Value>=Parameters!from_date.Value</Value>
                        </Parameter>
                        <Parameter Name="to_date">
                          <Value>=Parameters!to_date.Value</Value>
                        </Parameter>
                      </Parameters>
                      <ReportName>Holding_Summary_Multi_Period</ReportName>
                    </Subreport>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.25in</Height>
            </TableRow>
          </TableRows>
        </Details>
        <TableColumns>
          <TableColumn>
            <Width>10.5in</Width>
          </TableColumn>
        </TableColumns>
        <Height>0.5in</Height>
      </Table>
    </ReportItems>
    <Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
    <DataSet Name="Main_Report">
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
        <QueryParameters>
          <QueryParameter Name="@machine_id">
            <Value>=Parameters!machine_id.Value</Value>
          </QueryParameter>
        </QueryParameters>
        <DataSourceName>DataSource1</DataSourceName>
      </Query>
      <Fields>
        <Field Name="syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>syscode</DataField>
        </Field>
        <Field Name="display_name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>display_name</DataField>
        </Field>
        <Field Name="customer_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>customer_syscode</DataField>
        </Field>
        <Field Name="account_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>account_syscode</DataField>
        </Field>
        <Field Name="machine_ip">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>machine_ip</DataField>
        </Field>
      </Fields>
    </DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
    offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
    <ReportItems>
      <Image Name="image1">
        <Sizing>Fit</Sizing>
        <Left>8.875in</Left>
        <MIMEType />
        <Width>1.5in</Width>
        <Source>External</Source>
        <Style />
        <Value>bottom_right_logo.gif</Value>
      </Image>
    </ReportItems>
    <Height>0.5in</Height>
    <PrintOnLastPage>true</PrintOnLastPage>
    <PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

Report Server service Error.

Hi,
I am trying to configure Reports server non Cartridge but I am gettion
following error message in reports server log file.
*** 2000-01-25 22:16:02 -- Daemon failed to listen to port.
i gave port number as 1951.
If I try to start service in the windows nt
following error message is coming.
"The Oracle Reports Server[Repserver] service returned service specific error 186."
My system configuration is
Oracle8i database, OAS 4.0.7 and Reports6I and developer server. I am running all of them in one machine using sp3.
As per discussion i have changed Tnsnames.ora to test.world but still unsuccessful. Even in listener.ora i have included port 1951 but no luck
Appr. any response.
Rajesh.
null

1. listener.ora is for the Net8 listener - nothing to do with the Reports Server, so I suggest you change it back to whatever port it was listening on (usually 1521 or 1526) and then stop and re-start the Net8 listener (otherwise it will prevent the reports server from listening on that port).
2. You need to look in sqlnet.ora and add whatever value for names.default_domain is to the alias in tnsnames.ora. So if it says 'world' in sqlnet.ora, you need 'alias.world = (ADDRESS....' in tnsnames.ora
3. Try another port in tnsnames.ora
4. re-install reports 6i beta - the installer will set up, configure, and start the reports server for you.
Regards
The Oracle Reports Team http://technet.oracle.com

Report server gives error

i have installed oracle 9i AS (EE)on NT,
Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
i want to display reports through JSP How it can be done? Does anybody knows it?
Naresh
null

Please check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye !

Report server start error

Hi,
After I installed my Devsuit10g report server was starting fine without any problem by using this command 'rwserver server=servername'
Then I have installed oracle 10g on the same machine, after that report sever start gives this error message as 'The procedure entry psoasys could not be located in the orapls10.dll'.
I can see this .dll in both oracle devsuithome/BIN and oracleDB home/BIN.
Now how to start the report server. I have no Oracle AS installed in this machine.
Has anybody encountered this problem? any solution?
Rgds

Maybe this could help:
set ORACLE_HOME=devsuitehome
set PATH=devsuitehome/BIN;%PATH%
rwserver server=servernamecheers

Report server name error

aoa!
plz help me, i got following error when i run report through forms on application server 9i, forms run successfully, but report not. the error is
"FRM-41213: Unable to connect to the Reports server misdb"
thanks in advance.

Assuming misdb Reports server is up and running, see Metalink Note:291955.1 - Diagnosis Test Form For Easy Debugging of FRM-41213 Error

Bug report: ube_ipa: internal error when compiling with -xO5

When compiling imlib2-1.1.2, one source file causes compilation to fail with the following error message:
ube_ipa: internal error
cc: ube_ipa failed for loader_tiff.c
The command which fails is (probably wrapped):
cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I.. -I../src -I../loaders -I../libltdl -I/usr/X11R6/include -I/usr/openwin/include -I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -g -fast -xarch=386 -xstrconst -v -xildoff -xO5 -c loader_tiff.c -KPIC -DPIC -o .libs/loader_tiff.o
Changing -xO5 to -xO4 works around the problem. The source file in question is imlib2-1.1.2/loaders/loader_tiff.c
Patch 112756-10 has been applied, and doesn't correct the problem. GCC doesn't have any problem compiling the file.
A quick note to any Sun employees reading this: it took me 45 minutes to find somewhere to submit this bug report. Searching sun.com for "submit bug report" turned up many forum postings where people asked "Where do I submit bug reports?", a bug report form for Sun One Java Studio, and not much else. It might be in your interest to make submitting bugs easier.

Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Report Server giving error http404

roblem with Report Server :
I have installed report server and i am using CGI not web cartridge.I have
followed all the stpes of installation and when i call report through URL,I am getting
following error :
HTTP-404 File not found
The URL is,
http://brio1:4444/webcache/rwcgi60.exe?server=repserver+report=emp.rdf+userid=scott/tiger@db_8+destype=cache+desformat=cache
where
webcache is a virtual directory defined in the directory structure of listner with port no. 4444
which is pointing to, F:\orant\report60\server\cache
repserver is a report server with the same tnsname in tnsname.ora file
Following environment variables have also been set,
REPORTS60_VIRTUAL_MAP = /webcache/ , which is again defined in the directory structure of listner with port no. 4444
and pointing to, F:\orant\report60\server\cache
REPORTS60_PHYSICAL_MAP = F:\orant\report60\server\cache
REPORTS60_SHARED_CACHE= yes
1.How do i use report server efficiently when i call report through calling form using RUN_PRODUCT?

You must map the directory /bin of the DEVELOPER 6.0(where you store rwcgi60.exe) as a CR(CGI RECURSIVE) directory (do not copy the rwcgi60.exe to the bin directory of OAS 4.0.8 also map usual as /ows-bin/)
From your error seems that you don't refer correctly the mapping of rwcgi60.exe. desformat=HTML odesformat=PDF.

Crystal Reports Server XI error in Infoview

We have an old Windows 2000 server that was running Crystal Reports Server XI (not R2) and we recently reinstalled it on a Windows 2003 server and imported all the reports. All scheduled reports work find however in Infoview if we click View Latest Instance I get the following error:
"An error has occurred: File or assembly name CrystalDecisions.Enterprise.Desktop.Word, or one of its dependencies, was not found."
In the Application Event log on the server I get the following 3 errors at the same time.
"Failed to connect to server. Error: 0x80070005"
"Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK' failed during request for component '{90C1F7A4-6DFD-4F1F-A5D2-923F04D9D77B}'"
"Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK', component '{54EC1C27-1B41-4A53-8E89-8F8D13E78AB8}' failed. The resource '' does not exist."
it looks like a permissions issue. Has anyone seen this before?
Mike

Post Author: krishna.moorthi
CA Forum: General
Hi,
I am new in Crystal Report Server XI .
I am facing the problem to passing dyamic parameters and connection information to the report in the ASP.Net and C# environment.
can u give me the tips for dynamic passing parameters and connection to the report?
waiting for your reply.
thanks in advance

Report Server Internal Error

Similar Messages

Maybe you are looking for