Report server not functioning.

HI,
All the services of Oracle 9iAS are working except the report
server. when I start it through services it says application
cannot start, and stopped due to application error 186. I cant'
understand.
othere thin my management server is also functioning. it gives
me error the path is wrong , how can I change it.
Thanx in advance.
Sreekant

Yes, could you also specify the version of 9iAS you are using,
the version number of reports?
HI,
All the services of Oracle 9iAS are working except the report
server. when I start it through services it says application
cannot start, and stopped due to application error 186. I cant'
understand.
othere thin my management server is also functioning. it gives
me error the path is wrong , how can I change it.
Thanx in advance.
Sreekant

Similar Messages

Report server not starting up

We are using oracle 9iAS version 1.0.2.1.0 v1.
our Report server is not starting up with error
Error 1075 The dependency service does not exists or has been marked for
deletion.
How to find out the dependency service

Hi,
this is the Oracle Forms forum, you might have more luck in the Reports forum here Reports
However, I guess you installed the reports server as a service under windows, right? Check the DependOnService registry key value under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<reports server key>
Uninstall the reports server using rwserver -uninstall <server_name> and reinstall it using rwserver -install <server_name> [batch=yes/no] [autostart=yes/no] with valid parameters.
HTH
Gerald.

PDF printing--tomcat/cocoon installed, but report server not found------

As I understood, APEX 3.1 requires either BI/FO tools to enable PDF printing.
As I do not have BI license, and as I happened to check a very good link on a blog which had a detailed viewlet on apache-cocoon route for PDF print enabling, I downloaded the tomcat, cocoon source files, built the cocoon .WAR, put it in required place as instructed, started tomcot (ran into pronblems because of port conflits, resolved these by configuring different ports for 8005 and 8080 ports).
Now, when I want to configure the external report server, I am stuck.
I am not able to locate 'Instances' tab, or 'manage environment settings ' tab in 'manage services'
I am able to find only following tabs in 'manage services' under HOME.--> Administration ----> Manage services
1) session state
2) caching
3) workspace preferences
4) applications
5) workspace
6) workspace schema reports
7) Logs
Can anyone help me to find out where to configure the 'report server' now?
Thanks,
suresh.

Sorry, it was a silly problem:) You have to be logged in as admin to 'see' the 'instances' tab. maybe in all the tomcat/cocoon build/config issues, this simply got off my head!
now, the problem of print server config is over, I have configured the same. the 'print' link is available now in report region, when I run the report. but when I click the 'print' link, it is taking ages...or rather it is still processing...!!
Can anyone please point out to me now what is the problem...?
thanks.

Oracle Report Server Not Accessible

Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
 Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
 Oracle Instance Location: C:\Oracle\Middleware\asinst_1
 Oracle Instance: asinst_1
 Domain Option: Create Domain
 Domain Name: Sapphire
 Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
 Domain Host Name: PC201845.cts.com
 Domain Port No: 7001
 User Name: weblogic
 Automatic Port Detection: true
 Administrator Console: http://PC201845.cts.com:7001/console
 EM Console: http://PC201845.cts.com:7001/em
 EMAgent URL: http://PC201845.cts.com:5155/emd/main
 Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
 Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.

TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=transmission control protocol. NFS=network file server.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share.

Standalone report server not found on the network between logical partitions on AIX

Hello,
Here s our architecture:
forms/reports11gr2(patchset 1)
weblogic 10.3.6
on IBM AIX 7.1
Server JRE
Java(TM) SE Runtime Environment (build pap6460sr13ifix-20130303_02(SR13+IV37419) )
IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr13-20130114_1
JRE -client - 1.6.0_27
We have 2 logical partitions separated in 2 different physical m/c where cluster of forms /reports is installed.
if i have a report service repsrv11g on one logical partition say, box 100 on Physical box 6000, the other logical partition box101's forms server on physical box 7000 is not able to look up the report service when calling from Forms using the Run_report_object.
Gives, FRM -41213 error.
If i just run the URL(use 2nd box) with http://101:8888/reports/rwservlet/showjobs?server=repsrv11g, it gives REP-51002: Bind to Reports Server repsrv11g failed
We thought/read that as long as they re on the same network / domain, report service is available.
Also did rwdiag.sh on one partition, its not able to find the other one.
Ran the test form which Oracle provides and it s also not able to find the report server on the network when run on the other lpar.
Temporarily, we created another report service on the other lpar but still using loadbalancing dns while doing web.show_document, so, it could potentially fail to bring up a report if load balancer redirects from one form's server to report server on the other partition.
Any thoughts would be greatly appreciated.
Thanks.

Hello,
Any inputs on this pls?

Report server not starting

Hi!!
I am new to Oracle AS. Today on an Oracle AS (10.1.2.3) on Solaris when we giving opmnctl startall it starting all the process but not the Report server.
$opmnctl startall
Startup in APPLICATION SERVER 02
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=dgcisapp02:6200
12 of 13 processes started.
ias-instance id=app_inst2.dgcisapp02
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
rep_dgcisapp02_appHome1/ReportsServer/rep_dgcisapp02_appHome1
Error
--> Process (pid=13855)
failed to start a managed process after the maximum retry limit
Log:
/oracle/oraapp/product/10.1.2/opmn/logs/rep_dgcisapp02_appHome1~ReportsServer~rep_dgcisapp02_appHome1~1
The log file mentioned here only contains
10/07/06 15:46:12 Start process
10/07/06 15:55:23 Start process
10/07/06 15:55:28 Start process
10/07/06 15:55:32 Start process
10/07/06 15:57:02 Start process
10/07/06 15:57:06 Start process
10/07/06 15:57:10 Start process
if I give opmnctl status it is showing like this
Processes in Instance: app_inst2.dgcisapp02
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 13873 | Alive
OC4J | home | 13821 | Alive
OC4J | OC4J_BI_Forms | 13823 | Alive
OC4J | OC4J_Portal | 13826 | Alive
WebCache | WebCache | 13812 | Alive
WebCache | WebCacheAdmin | 13813 | Alive
HTTP_Server | HTTP_Server | 13814 | Alive
Discoverer | ServicesStatus | 13815 | Alive
Discoverer | PreferenceServer | 13817 | Alive
wireless | performance_server | 13838 | Alive
wireless | messaging_server | 13839 | Alive
wireless | OC4J_Wireless | 13840 | Alive
rep_dgcisapp02_ap~ | ReportsServer | N/A | Down <<--- This should be up. It was up previously. Tried a restart but not coming up.
namingservice | namingservice | 13818 | Alive
DSA | DSA | N/A | Down
The only change that I did today that I backed up logs from $ORACLE_HOME/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/
and made all the logs (jms.log,rmi.log,global-application.log,server.log,default-web-access.log) to 0 by giving
# >logname
as root user.
applications are writing to the new logs as I can see that its size is increasing.
Pls help me to resolve this out !!
GC

There is no error in the report server log.
if i open the log in an terminal giving tail -f and from other terminal i give
opmnctl startproc ias-component=rep_dgcisapp01_ASHome1
3 times start process is appending in report server logs. like
10/07/06 17:52:56 Start process
10/07/06 17:53:37 Start process
10/07/06 17:53:42 Start process
10/07/06 17:53:46 Start process
Can not access em to start the report server.
gc

Report server not working

Hi, I am using "x86_forms_reports_101202". I have defined a new report server and it has been working properly but today, when trying to run a report, the form from which i am running it, does not repond. I have restarted both the services and the server too. I have also checked opmnctl and the report server is running and i log filest gives no information about what is happening. Could anybody help me where to look where the problem is? ... Thanks in advanced.

Both Crystal Reports and Crystal Reports Server are installed on the same machine. It is a Windows 2003 server x64, service pack 2. There is no firewall running on this machine.
I am able to connect to the InputFileRepository server using netcat from a completely different machine, so I am sure it is not a firewall issue.
What else can I do to troubleshoot the issue? Are there any logs I can look at? If I use something like Wireshark, will I get any sort of meaningful packet trace?
I am completely stumped as to what is going on. I wish things on Windows were as easy to fix as things on Linux :-\

Report not run inexplorer and report server not start

sir
i install dev suit 10g and
1. create new form and test that run in explorer
2. create report and test in report builder that run and give right result, but when i test in explorer that not run and no error and report server OC4J not start i try but window appear and hide
please give me idea how run report in explorer
regard
fahim

The normal procedure for the Developer Suite is:
1. Start OC4J instance via Windows Start menu.
2. Run a report:
http://127.0.0.1:8889/reports/rwservlet?module=....
That doesn't work?
Can you see the in-process report server?
http://127.0.0.1:8889/reports/rwservlet/showenv?
Or errors in the job queue?
http://127.0.0.1:8889/reports/rwservlet/showjobs?
(note that your port number may be different)

Reports server not coming up....

Hi ,
During clonign after the changing of APPS password the reports server is not coming up ....
getting the error below....
adrepctl.sh: exiting with status 2
starting Reports Server for CT1RTD on port 25103.
REP-0186: Daemon failed to listen to port
adrepctl.sh: exiting with status 0
Reports Server for CT1RTD is already stopped.
I had changed the CGIcmd.dat...wiht the newly updated apps password and also updated wdbsvr.app...
TNS entry also fine....
port is not used by anything else....
before changing the APPS password it was running up and fine...
anyone have any idea...how ot fix this....
Thanks,
Kr

issue got fixed...when changed the domain in tnsnames.ora

Report server not access

hello
i have oracle 10 when i run the report they could not generate plz reply with solution
message: not connected to the report server.

If you are getting an error like the following:
e.g
Rep-51002 Unable to Bind Report Server
1- If you are calling the reports from forms, Are you able to run the reports from reports URL or command line?
2- Is the reports server up and running? You can use ORACLE_HOME/bin/rwdiag.sh -findAll and see if you can see it
3- If is not running, have you checked reports logs files?
Regards

Oracle report server not startup

Hi All,
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
eqiiasl521.fmrco.com->tail -50 ./product/10gAS_10.1.2.0.2/ifs/cmsdk/log/eqodsdb-itf_fmrco_com_1516_odsdbi1_fmrco_com_CMSDK/eqiiasl521_fmrco_com_Node.log | more
at oracle.ifs.protocols.nfs.server.NfsServerThread.run(NfsServerThread.java:154)
at oracle.ifs.protocols.nfs.server.RpcListener$ServerThread.run(RpcListener.java:298)
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:113)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at oracle.ifs.protocols.nfs.server.XdrStream.read(XdrStream.java:304)
at oracle.ifs.protocols.nfs.server.XdrStream.nextPacket(XdrStream.java:207)
at oracle.ifs.protocols.nfs.server.XdrPacket.nextPacket(XdrPacket.java:168)
at oracle.ifs.protocols.nfs.server.RpcPacket.receive(RpcPacket.java:454)
at oracle.ifs.protocols.nfs.server.RpcServer.run(RpcServer.java:204)
at oracle.ifs.protocols.nfs.server.NfsServerThread.run(NfsServerThread.java:154)
at oracle.ifs.protocols.nfs.server.RpcListener$ServerThread.run(RpcListener.java:298)
Thanks for your help
www.dailytechs.com
-------------------------------

TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=transmission control protocol. NFS=network file server.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share.

Standalone server not functioning

I have just installed Coldfusion for the first time.
The Coldfusion MX 7 application server service is running,
but does not function. For instance, when requesting '
http://localhost/' or '
http://localhost:8500/' in a
browser the page cannot be displayed.
This also means that I can't add any Dreamweaver extensions
since that utility is a .cfm file.

> The Coldfusion MX 7 application server service is
running, but does not
> function. For instance, when requesting '
http://localhost/' or
> '
http://localhost:8500/' in a
browser the page cannot be displayed.
>
> This also means that I can't add any Dreamweaver
extensions since that
> utility
> is a .cfm file.
Do you have any other services installed?
For example, I left CF MX7 on when I installed CF8 (just to
make sure
everything is working. I also have WAMP installed. So my CF8
administrator
is at
http://localhost:8501/cfide/administrator.cfm

Reports Server not start

hi!
OEBS11i Vision demo
at Red Hat Enterprise Linux AS release 4
after editing $FND_TOP/usrxit/devenv.env
and restarting OAS, Reports server is not running.
And not runnig after restoring backup copy of devenv.env
log:
REP-0001: Unable to find the report builder message file. Please verify your installation.

Try to "Create Applications environment file" from adadmin and check then (You may take a backup of your current env files before).

Web Intelligent Reporting Server not started

Hi Experts - I am using BO XI 3.1 with Sp - 2 and SAP BI 7.10.
When i run any webi report the Status of Web Intelligent Reporting Server become - Initializing.
If i restarts the the SIA , Again the Webi Intelligent server got start , but as i run any webi query in webi rich client it stops working and the status in CCM become Initialising... and its never turn up green untill i again restarts the SIA.
Is this a bug in Sp -2 , I haven't apply ant fix pack beyond Sp-2.
Thanks
Ashwani

Hi
can you please activate the tracing of the webi processing server. Go to the CMC and under Servers->Web Intelligence Processing Server->Properties just add -trace xl in the command line argument and restart the server. Check the WebI log file created in the logging directory for error messages.
Regards,
Stratos
PS: Does your SIA run using the local system account (CCM->SIA->Properties->Logon On As)?

SQL Server not functional after Windows Sysprep

Hello!
I sysprep generalized a full configured Windows Server 2012 Standard copy with SQL Server 2012 configured on it but not set up using the sysprep prepare method. I only want to generalize the windows copy but have the SQL install work as previously configured.
After i boot back into the server after the generalize finishes i am unable to access the SQL server using windows authentication even after i changed the computer name and use the same user accounts as before. I have seen the sysprep prepare for imaging
documentation for syspreping an SQL instance however i already have SQL installed and i just want to migrate this install to newer hardware. Does anyone have any advice for this? Thank you.

Hello Kabitokaii,
It seems that sql server is not recognizing your new computer name. Since your new name is different from the name when SQL Server has been installed, you have to change the also in sys.servers....
you can query the name by submitting the following statement: (once you´re told you can´t connect only with windows autentication, i`m assumin that you can connect with SQL Server autentication.)
SELECT * FROM SYS.SERVERS.
If the names are different (from SYS.SERVERS to current machine name), you have to change is, following the bellow steps:
http://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/
Steps to rename SQL Server
Execute the below commands for each instance on the machine.
-- for a Default Instance
sp_dropserver <old_physical_server_name>
GO
sp_addserver <new_name>, local
GO
--for a Named Instance
sp_dropserver <'old_physical_server_name\instancename'>
GO
sp_addserver <'new_name\instancename'>, local
GO
</new_name></old_physical_server_name>
Restart the SQL Server services.
Execute the below query in each instance to verify the updated system metadata.
SELECT @@SERVERNAME
Edvaldo Castro http://edvaldocastro.com MCITP Database Administrator on SQL Server® 2008 MCITP Database Administrator on SQL Server® 2005 MCTS: SQL Server® 2008 MCTS: SQL Server® 2005 MCT: Microsoft Certified Trainer MTA: Microsoft Technology Associate
MTAC – Microsoft Technical Audience Contributor CCSQLA – Cambridge Certified SQL Associate TOEIC – Test of English for International Communication

Report server not functioning.

Similar Messages

Maybe you are looking for