Report server start error

Hi,
After I installed my Devsuit10g report server was starting fine without any problem by using this command 'rwserver server=servername'
Then I have installed oracle 10g on the same machine, after that report sever start gives this error message as 'The procedure entry psoasys could not be located in the orapls10.dll'.
I can see this .dll in both oracle devsuithome/BIN and oracleDB home/BIN.
Now how to start the report server. I have no Oracle AS installed in this machine.
Has anybody encountered this problem? any solution?
Rgds

Maybe this could help:
set ORACLE_HOME=devsuitehome
set PATH=devsuitehome/BIN;%PATH%
rwserver server=servernamecheers

Similar Messages

  • Error while install oracle 11G forms and reports  -creating Reports  Server components error

    Hello,
    while install oracle 11G forms and report i face below issue on below step ( configuration step)
      >> creating Reports  Server components error
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
    [2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

    Ram,
    You didn't read the response in your other thread.
    WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
    John

  • Report Server service Error.

    Hi,
    I am trying to configure Reports server non Cartridge but I am gettion
    following error message in reports server log file.
    *** 2000-01-25 22:16:02 -- Daemon failed to listen to port.
    i gave port number as 1951.
    If I try to start service in the windows nt
    following error message is coming.
    "The Oracle Reports Server[Repserver] service returned service specific error 186."
    My system configuration is
    Oracle8i database, OAS 4.0.7 and Reports6I and developer server. I am running all of them in one machine using sp3.
    As per discussion i have changed Tnsnames.ora to test.world but still unsuccessful. Even in listener.ora i have included port 1951 but no luck
    Appr. any response.
    Rajesh.
    null

    1. listener.ora is for the Net8 listener - nothing to do with the Reports Server, so I suggest you change it back to whatever port it was listening on (usually 1521 or 1526) and then stop and re-start the Net8 listener (otherwise it will prevent the reports server from listening on that port).
    2. You need to look in sqlnet.ora and add whatever value for names.default_domain is to the alias in tnsnames.ora. So if it says 'world' in sqlnet.ora, you need 'alias.world = (ADDRESS....' in tnsnames.ora
    3. Try another port in tnsnames.ora
    4. re-install reports 6i beta - the installer will set up, configure, and start the reports server for you.
    Regards
    The Oracle Reports Team http://technet.oracle.com

  • Report Server Internal Error During Report Generation

    Hi,
    We are running 9iAS on Sun Enterprise server. Though we have
    successfully installed Form & Report Servers. The Form Server is
    running perfectly but while reports are generated from Report
    Server, it gives Internal Server Error (HTTP Error Code: 500) --
    The server has encountered error or misconfiguration...
    Checking the hard disk, we found that the report in PDF file has
    been generated but it gives error being delivered.
    We have no idea what had happened. Can someone kindly enlight me
    some possibilities?

    I guess to start with the obvious, IE 500 Internal Server Error resolves to Permission denied: 'GetObject'.
    Before chasing that error, what version of CR and .NET are you using?
    Once we determine that you are using a version of CR that is actually supported on the OS, we can move on to [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to see if it tell us something - look for "Access Denied" messages.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Problem in configuring Reports Server. Error-186

    Dear All,
    I have Developer6.0 on Windows NT with service pack 3 applied.
    Problem is that the Report Server is not getting configured as an NT service .
    after typing
    rwsmts60 -install repserver
    a Service is created in the Win NT Services
    when I try to start
    ( I have a default printer )
    the following error comes :
    "The Oracle Reports Server (repserver )
    service returned service specific error
    186"
    Secondly I tried not to use NT service
    by
    rwsmts60 -listen repserver
    It gives the error
    "REP-0186: Daemon failed to listen to port"
    My Tnsnames.ora entry is
    repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
    ( Port = 1949 ) )
    I tried different port no.s but still the error persists.
    The report server and the OAS is on the same Machine and database is on a separate machine
    I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
    Thanks,
    Rajat
    null

    did you ever get this resolved? I have the same problem. [email protected]
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ajayb1():
    Dear All,
    I have Developer6.0 on Windows NT with service pack 3 applied.
    Problem is that the Report Server is not getting configured as an NT service .
    after typing
    rwsmts60 -install repserver
    a Service is created in the Win NT Services
    when I try to start
    ( I have a default printer )
    the following error comes :
    "The Oracle Reports Server (repserver )
    service returned service specific error
    186"
    Secondly I tried not to use NT service
    by
    rwsmts60 -listen repserver
    It gives the error
    "REP-0186: Daemon failed to listen to port"
    My Tnsnames.ora entry is
    repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
    ( Port = 1949 ) )
    I tried different port no.s but still the error persists.
    The report server and the OAS is on the same Machine and database is on a separate machine
    I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
    Thanks,
    Rajat
    <HR></BLOCKQUOTE>
    null

  • Report server gives error

    i have installed oracle 9i AS (EE)on NT,
    Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
    i want to display reports through JSP How it can be done? Does anybody knows it?
    Naresh
    null

    Please check at http://<server>/dev60html/runrep.htm for follwings :
    01. your test.rdf must be in report60 folder
    02. your db must contain scott user
    03. connect string must be tested and give the same inplace of test
    04. your webhost may contain a dot, please check this should be the same as yours
    hope this will help
    bye !

  • Report Server Internal Error

    While using 9iAS Report Server, we encounter HTTP500: Internal
    Server Error problem.
    Looking into the Apache error_log, we found the following error:-
    [Tue Oct  9 19:29:58 2001] [error] [client 128.1.0.1] Premature
    end of script
    headers: /export/home2/oracle/6iserver/tools/web60/cgi/rwcgi60
    Can some one help?

    While using 9iAS Report Server, we encounter HTTP500: Internal
    Server Error problem.
    Looking into the Apache error_log, we found the following error:-
    [Tue Oct  9 19:29:58 2001] [error] [client 128.1.0.1] Premature
    end of script
    headers: /export/home2/oracle/6iserver/tools/web60/cgi/rwcgi60
    Can some one help?

  • Report server name error

    aoa!
    plz help me, i got following error when i run report through forms on application server 9i, forms run successfully, but report not. the error is
    "FRM-41213: Unable to connect to the Reports server misdb"
    thanks in advance.

    Assuming misdb Reports server is up and running, see Metalink Note:291955.1 - Diagnosis Test Form For Easy Debugging of FRM-41213 Error

  • Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

    I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
    I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
    When I preview the report on Report Server. I got the following error message:
    Error in File Report1: Failed to load database information.
    Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
    Database driver: Oracle
    Server: servers_host_name
    Database: (tried both ORACLE_SID and tns_name)
    User: oracle_user_name
    Password: oracle_pw
    It still got the same problem.
    I will appreciate any help.
    Tham.

    I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like.  I poked around some, and was able to get the Instant Client working with a few minor changes.  Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
    The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
    To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path.  This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment.  The following is what I put in my file (again for the 32-bit 11g R2 instant client):
         export ORACLE_SID=summitdb
         export ORACLE_HOME='/usr/lib/oracle/11.2/client'
         export ORACLE_BASE='/usr/lib/oracle/'
         export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
         export PATH="$:/usr/lib/oracle/11.2/client/bin"
         export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
    After that, I created the missing soft link using this command:
         ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
    Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

  • Report Server giving error http404

    roblem with Report Server :
    I have installed report server and i am using CGI not web cartridge.I have
    followed all the stpes of installation and when i call report through URL,I am getting
    following error :
    HTTP-404 File not found
    The URL is,
    http://brio1:4444/webcache/rwcgi60.exe?server=repserver+report=emp.rdf+userid=scott/tiger@db_8+destype=cache+desformat=cache
    where
    webcache is a virtual directory defined in the directory structure of listner with port no. 4444
    which is pointing to, F:\orant\report60\server\cache
    repserver is a report server with the same tnsname in tnsname.ora file
    Following environment variables have also been set,
    REPORTS60_VIRTUAL_MAP = /webcache/ , which is again defined in the directory structure of listner with port no. 4444
    and pointing to, F:\orant\report60\server\cache
    REPORTS60_PHYSICAL_MAP = F:\orant\report60\server\cache
    REPORTS60_SHARED_CACHE= yes
    1.How do i use report server efficiently when i call report through calling form using RUN_PRODUCT?

    You must map the directory /bin of the DEVELOPER 6.0(where you store rwcgi60.exe) as a CR(CGI RECURSIVE) directory (do not copy the rwcgi60.exe to the bin directory of OAS 4.0.8 also map usual as /ows-bin/)
    From your error seems that you don't refer correctly the mapping of rwcgi60.exe. desformat=HTML odesformat=PDF.

  • Crystal Reports Server XI error in Infoview

    We have an old Windows 2000 server that was running Crystal Reports Server XI (not R2) and we recently reinstalled it on a Windows 2003 server and imported all the reports.  All scheduled reports work find however in Infoview if we click View Latest Instance I get the following error:
    "An error has occurred: File or assembly name CrystalDecisions.Enterprise.Desktop.Word, or one of its dependencies, was not found."
    In the Application Event log on the server I get the following 3 errors at the same time.
    "Failed to connect to server. Error: 0x80070005"
    "Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK' failed during request for component '{90C1F7A4-6DFD-4F1F-A5D2-923F04D9D77B}'"
    "Detection of product '{5A5C2A47-52AC-4715-9A6C-E4433B2DDDEF}', feature 'DotNETSDK', component '{54EC1C27-1B41-4A53-8E89-8F8D13E78AB8}' failed.  The resource '' does not exist."
    it looks like a permissions issue.  Has anyone seen this before?
    Mike

    Post Author: krishna.moorthi
    CA Forum: General
    Hi,
    I am new in Crystal Report Server XI .
    I am facing the problem to passing dyamic parameters and connection information to the report in the ASP.Net and C# environment.
    can u give me the tips for dynamic passing parameters and connection to the report?
    waiting for your reply.
    thanks in advance

  • Crystal Reports Server XI - Error: Help

    Post Author: Robert
    CA Forum: General
    Hey Guys,
    Error is to do with dynamic parameters and info view (and cms)
    When i run a report with dynamic parameters it will prompt me to select the parameters i want, but when i click ok i get this error:
    Unknown Error in Prompt Engine !! and the report is no more
    Im under pressure to get this working again, any help most greatly appreciated.
    Robert

    Post Author: krishna.moorthi
    CA Forum: General
    Hi,
    I am new in Crystal Report Server XI .
    I am facing the problem to passing dyamic parameters and connection information to the report in the ASP.Net and C# environment.
    can u give me the tips for dynamic passing parameters and connection to the report?
    waiting for your reply.
    thanks in advance

  • The Report Server Failed Error in Crystal Report

    Dear All,
    I converted one PLD to Crystal Report using the Crystal Converter tool in SAP B1 8.81 Pl00. However, when I try to preview the Crystal Report, I am getting an error "The Report Server Failed" and then SAP hangs.
    Any known solution for this?
    Thanks and regards,
    Bharath S

    Dear Bharath,
    Your PL is too low. Upgrade to the latest PL will solve this problem.
    Thanks,
    Gordon

  • Weblogic server start error: java.lang.OutOfMemoryError

    Hi:
              when i start weblogic server, i met following error !
              java.lang.OutOfMemoryError
              <<no stack trace available>>
              why?
              thanks!
              starting output as follow :
              C:\bea7\user_projects\zhudomain>startweblogic
              C:\bea7\user_projects\zhudomain>echo off
              CLASSPATH=C:\bea7\jdk131_03\lib\tools.jar;C:\bea7\weblogic700\integration\li
              b\wl
              pi-worklist.jar;C:\bea7\weblogic700\samples\server\eval\pointbase\lib\pbserv
              er42
              ECF172.jar;C:\bea7\weblogic700\server\lib\weblogic_sp.jar;C:\bea7\weblogic70
              0\se
              rver\lib\weblogic.jar;
              PATH=.;C:\bea7\weblogic700\server\bin;C:\bea7\jdk131_03\bin;C:\PROGRA~1\RATI
              ONAL
              \RATION~1\NUTCROOT\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\PRO
              GRA~
              1\RATIONAL\RATION~1\NUTCROOT\mksnt;c:\Oracle\Ora81\bin;C:\WINNT\system32;C:\
              WINN
              T;C:\WINNT\System32\Wbem;C:\PROGRA~1\ULTRAE~1;C:\CTEX\MiKTeX\TeXMF\miktex\bi
              n;C:
              \CTEX\MiKTeX\LocalT~1\cct\bin;C:\Program Files\Rational\common;C:\Program
              Files\
              Rational\ClearQuest;C:\Program Files\Rational\Rose\TopLink\;C:\Program
              Files\Rat
              ional\Rational Test;C:\bea7\jdk131_03\bin
              * To start WebLogic Server, use a username and *
              * password assigned to an admin-level user. For *
              * server administration, use the WebLogic Server *
              * console at http://[hostname]:[port]/console *
              C:\bea7\user_projects\zhudomain>"C:\bea7\jdk131_03\bin\java" -hotspot -Xms32
              m -X
              mx200m -Dweblogic.security.SSL.trustedCAKeyStore=C:\bea7\weblogic700\server\
              lib\
              cacerts -Dweblogic.Name=myserver -Dbea.home="C:\bea7" -Dweblogic.management.
              user
              name= -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled= -Dja
              va.s
              ecurity.policy="C:\bea7\weblogic700\server\lib\weblogic.policy"
              weblogic.Server
              <2002-11-13 ÏÂÎç04ʱ21·Ö01Ãë> <Info> <Security> <090065> <Getting boot
              identity
              from user.>
              Enter username to boot WebLogic server:system
              Enter password to boot WebLogic server:
              Starting WebLogic Server...
              <2002-11-13 ÏÂÎç04ʱ21·Ö08Ãë> <Notice> <Management> <140005> <Loading
              configurat
              ion C:\bea7\user_projects\zhudomain\.\config.xml>
              java.lang.OutOfMemoryError
              <<no stack trace available>>
              

    Hi JLK,
    Now as you can see that you are getting "java.lang.OutOfMemoryError: PermGen space" during the activation on an application it means that you are application needs more space in the non-heap part of the JVM which is PermGen to create the Classes, Class Structures, Methods and Reflection Objects of this applications hence you are getting this issue.
    Now how to solve this issue you try the following check list which would help you resolve this issue and overcome same type of issue in future
    1). Make Sure that the PermGen Area is not set to a very less value.
    2). Usually if an Application has Many JSP Pages in that case every JSP will be converted to a *.class file before JSP Request Process. So a large number of JSPs causes generation of a Large number of *.class files all these classes gets loaded in the PermGen area.
    3). While allocating the -XX:MaxPermSize make sure that you follow a rough Formula… which works in most of the Application Servers.
    MaxPermSize = (Xmx/3) —- Very Special Cases (One Third of maximum Heap Size)
    MaxPermSize = (Xmx/4) —- Recommended (One Fourth Of maximum Heap Size
    To get more information on this I would suggest you to have look at the below link which would surely help you in this case
    Topic: OutOfMemory Causes and First Aid Steps?
    http://middlewaremagic.com/weblogic/?p=4464
    Regards,
    Ravish Mody

  • Location of reports server start/stop script.

    Hiii..
    can anyone tell me the location of reports server script in R12, so that i can restart the reports server.
    And how can i restart the reports server..??
    Thanks..

    As u told i have stopped and started the adopmnctl.sh script, but the status is showing down...y.???
    [oravis@MSFTORA3 scripts]$ sh adopmnctl.sh start
    You are running adopmnctl.sh version 120.6.12010000.3
    Starting Oracle Process Manager (OPMN) ...
    adopmnctl.sh: exiting with status 0
    adopmnctl.sh: check the logfile /u03/oracle/VIS/inst/apps/VIS_msftora3/logs/appl/admin/log/adopmnctl.txt for more information ...
    The following is the status o/p
    [oravis@MSFTORA3 scripts]$ sh adopmnctl.sh status
    You are running adopmnctl.sh version 120.6.12010000.3
    Checking status of OPMN managed processes...
    Processes in Instance: VIS_msftora3.msftora3.msftpnq.com
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oafm | N/A | Down
    OC4JGroup:default_group | OC4J:forms | N/A | Down
    OC4JGroup:default_group | OC4J:oacore | N/A | Down
    HTTP_Server | HTTP_Server | N/A | Down
    adopmnctl.sh: exiting with status 0
    adopmnctl.sh: check the logfile /u03/oracle/VIS/inst/apps/VIS_msftora3/logs/appl/admin/log/adopmnctl.txt for more information ...
    Thankss..

Maybe you are looking for

  • Can Flex work with a perl CGI script?

    i have a perl script that returns xml data eg: http://www.script.com/thescript.pl?method=search?surname=kelly would it be possible to use httpservice here? or is it even possible?

  • How to setup JDBC/ODBC in J2EE 1.3?

    hi all, How to setup JDBC/ODBC in J2EE 1.3? I managed to run Db2, cloudscape but not MSSQL7. Is there anyone know how to set up this JDBC/ODBC driver for MSSQL7/ regards, elvis scjp

  • Embedding Fonts in 9i Reports

    Hi, I know this feature is suppose to be available in 9i Reports. I am wondering how this is done. Is it suppose to be done automatically? What has to be done to specify a particular font to be embedded in the report? We would like to embed the barco

  • How can I burn my copy of Lion to a disc after downloading it?

    Is the downloaded copy or image of Lion stored somewhere on my HD?

  • Sony HD Footage Needs Additional Components

    Hi Gang I'm working with FC6 I have QT Version 7.6.4 (518.35) Certain HD Footage shot on a Sony HD camcorder at 23.97 Frame Rate won't open in QT, just get a black screen. And in Final Cut, only get sound no Video. QT prompts me that certain addition