Report Server Success Page

Hi,
Where does the html/htm file for "success
completion" resides ?
Regards,
Izabella.

hi,
this page is created on the fly by the server. there is no way to change that.
regards,
the oracle reports team

Similar Messages

Report Server URL page can't be displayed.

So we attempted to upgrade sql 2012 to sql 2014 for SCCM. Upon doing so this broke reporting services. My dbadmin reverted back to sql 2012 and now we cant get reporting services at all to work. The issue started when he went to upgrade sql and
it had an error on the reporting services part because of some ssl cert which I don't think we use since the service urls are all http. I could never get the https to work the first time.
I am doing all of the below on the sql server itself.
in the reporting services configuration manager web service url section when you click on the report server web service url it goes to a page cant be displayed. If you go to the report manager url section and click on the report manager site identification
url it does take you to a webpage but says unable to connect to the remote server.
Any one have any ideas?

What you might do is look at the URL reservations. In order to view what is bound to http.sys you will need to open a command prompt on the server use the following command to view records:
netsh http show urlacl
If someone isn't correct, you can remove it using the following command, as an
example:
netsh http delete urlacl URL=https://servername:443/reportserver
URLs also get written to the rsreportserver.config file. So you may need to remove entries there.
I have had to do this for failed SSRS bindings. When making changes using netsh, do so with extreme care. In theory, removing all your bindings using reporting services configuration manager and re-adding them is supposed to do this for you,
but i've found out that isn't always the case. You could always try that first. It should be noted that in order to complete this step successfully, the report manager URL should be removed first (through the advanced button), then the web service
URL. When adding it back, the order is reversed, with the web service URL being added first and the report manager URL being added second.

Reports Server, 9iAS R2, Redhat 7.3

Hello,
My installation of 9iAS R2 proceeded fine after I installed the openmotif21 compatibilty rpm, but post installation I am still unable to start the reports server successfully.
When I run the command 'rwserver.sh server=rep_oradev' the server dialog box comes up with the message server starting up, but it never does. There is no error message or log entry either?
IF I edit the file $ORACLE_HOME/reports/conf/rep_oradev.conf so it only has the entry for the 'URLEngine', it will successfully start this server by itself, however it fails when I put the old entry for 'Engine' back in.
Has anyone successfully got the reports server running on RH7.3 and if so did they need to do anything in particular.
Regards,
James Ousby

Here's a note from our Sotware developers -
"SPS 2.1 (just started beta) will be officially supported on rh 7.3"
This was posted last June, so if you have the 2.1 release of the SPS then you should be OK.

Long running reports end successfully - present s "page can not be found"

Long running reports and browser timeouts - page can not be found"
We are launching Oracle 9i Reports from a Portal 9ias (release 9.0.2.2) system. We are in production with about 100 users. It is not going well with respect to Report problems.
We have the following problems:
1) hanging reports,
2) reports where parameter screens will not present due to large LOV on parameter screen,
3) and the most aggravating problem is "Page can not be found" presented to user when in fact the report ran successfully and create a .pdf.
We are at our wits end with Oracle Support and the Oracle Portal and Reports product.
As I said, I am launching Oracle Reports 9i from a Portal 9.0.2.2 application. I have several long running reports that complete successfully but return to the user an error "Page can not be found". Meta-link Note: 189454.1 suggests a modification to ReceiveTimeout parameter in the pc registry. We set the ReceiveTimeout parameter to 7200000. This did not solve the problem. Users still receive "Page can not be found".
Is there a report server side setting that we must set also ... or some other setting we should check?
I need to solve this issue. Is there someone out there that can help? Are there other people having similar Oracle Reports issues? According to Oracle Support we are the only people with these issues. Are we?

1) If you can reproduce the Reports Hanging issue consistently you can push Oracle Support to file a bug.
2) I am not sure about this now, but again you can take this to Oracle Support and push for resolution.
3) There are some problems with IE - Adobe integration. This is not a Reports bug. You can try
(a) Switching off Adobe - web integration in Adobe Acrobat reader settings, so that Adobe will not automatically open pdf file in web. Instead a dialog will be shown as to which application to open the pdf file or save it to disk and user can save the file to disk and open.
(b) Use IE latest version. (or some other browser like Netscape )
[ You can roll back the ReceiveTimeout param change you made to see the impacts one at a time ]
1) To confirm that this is a Adobe - IE pdf problem run the same report to htmlcss, rtf. If these come fine, then we can ascertain that this is Adobe - IE issue.
2) Give http://host:port/reports/rwservlet/showjobs?server=server_name. You can see all the jobs and their jobids. For the concerned jobs you can click and see whether output is actually generated or not.
Thanks
The Oracle Reports Team
The statements and opinions expressed here are my own and not that of my employer

Publishing content from reports server to a portal page

I have a system with Forms/Reports 6i in a client/server implementation. I have 6i reports server from this on the server tier. I have added 9iAS (minimal install) to get Portal and HTTP server. I have completed the configuration and I can have the portal page submit jobs to the reports server and they are displayed properly.
But I also wish to run reports from the application. This app submits jobs to the reports server via RWCLI60. I was hoping I could use 'File' as the destype and drop off content into a directory the web server knows about and then have a portal page that will generate links to the files. These could be pdf or html output.
Can anyone tell me if this is possible and provide a short list of steps to configure it? Thanks.

there is an example of this on dev2dev, see sample code, "redirect" example
(dev2dev.bea.com)
"Lancy Mendonca" <[email protected]> wrote:
>
All
In a webflow how is it possible to redirect to a portal page from a input
processor.
The situation I have is as follows. I have a homepage that has a login
portlet.
The user enters the username and password and after performing the validation
and authentication I need to redirect to another portal page that is
available
only to logged users.
Any help will be creatly appreciated

The Report Server page comes up on local server, but the page does not open from clients

Hello,
The Report Server Page opens up just fine on the local server, but page does not open up from desktops and client PCs. SSRS is installed on a Windows Server 2008 R2 server and with SQL Server 2008 R2 SP2
Clients are using IE 11 and they see:
Oops! Internet Explorer could not connect to tumdv-fsql01
How can make this site accessible from clients?
Thanks
Paul

That did not work.
What port numbers specifically does SSRS use? I will check the firewall.
http://100.100.100.100/CengeaReports/Pages/Folder.aspx
When I add the IP Address and try the link again, IE says "This page can not be displayed". When I try the Fix connection problems, IE says:
"The website is online, but it is not responding to connection attempts."
Paul

Report Server 10g - unexpected font change on second page of the report

Hi all,
I'm having a problem with Oracle Report server 10.1.2.3.0.
It's sometimes using an unusual font (It think it looks like a Greek one).
One example would be when a text overflow from page one to the second page it will change from Times New Roman to a "Greek" font and switches from bold to normal font it still happens in the same "Text" type item just on a new page. However when I update the text in the DB to a longer one so it flows through the whole second page to the 3rd page then it's using the correct font again.
When I open the generated PDF file in a text editor I see an unusual value in one of the font settings "/BaseFont /#53#79#6D#62#6F#6C" when I edit it manually to the value taken from another occurrence of the "BaseFont" in the same file it helps and changes the font to the correct one.
When I export the report to the PDF from report builder it's always using the correct font.
The encoded font "/#53#79#6D#62#6F#6C" translates to: "Symbol"
select CHR(TO_NUMBER('53','xx'))||CHR(TO_NUMBER('79','xx'))||CHR(TO_NUMBER('6D','xx'))||CHR(TO_NUMBER('62','xx'))||CHR(TO_NUMBER('6F','xx'))||CHR(TO_NUMBER('6C','xx')) from dual;
The correct font is as expected "Times-Roman"
I noticed that this happens only when HTML code is allowed in the Text/field. When I generate HTML version of the report I see after the page break and new table on the new page the following tag <font face="symbol">. When I set Web Setting->"Contains HTML Tags" set to NO then font stays the same even after the page break.
Did anyone experienced something similar?
Thank you,
Palo

We have had this a few times before and there are 2 ways that most likley will fix this.
If on mac close all adobe apps, do a find for all files with the .lst in their file name. Delete all you .lst files, they are font database files that go corrupt and will regenerate themselves when needed and usually a working copy.
Close any multiple master fonts you have open in fontbook, and other utility such as Suitcase. Multiple master fonts will have a filename like "Kronos mm", and in the adobe illustrator type >> font menu i believe they have a different icon (possibly a mm) than the others {a(type 1), tt(true type), O (opentype)}
Your problem is likely the 1st option, as the mm problem usually happens while editing the file, while the other is after you open the file. If you still have the problem, you then may have 2 different fonts sharing the same FOND ID number. Close as many fonts as you can, especially the one that looks like your wrong font.

Crystal Reports 2008 - Blank page on server only

Crystal Reports 2008 - Blank page on server only
My report is developed in the Crystal Reports 2008 Report Designer 12.0.0.683.
I have a .NET application that takes the report file, an ODBC connection and exports the resulting report to PDF. This application is deployed as an MSI and includes the Crystal Reports .msm merge module. The report uses multiple views and tables from a single database to create invoices in PDF format.
Problem: For one particular invoice, a blank page is being added to the end of the invoice. This blank page contains the report's standard page header. There is no missing data and no missing sections on the invoice. This is only occurring when the pdf is generated on a Windows Server 2008 x64 server where the application is deployed using the merge modules.
I have installed the application locally on my Windows Vista Business x86 system and the generated PDF does NOT contain the blank page at the end.
The blank page is not generated when previewing the report in Report Designer. For the particular invoice this is occurring on, footer F and footer G are blank and therefore suppressed.
Please bear in mind that this happens only for one particular invoice that uses this report file and does not happen from my local system using the same .rpt file.
The report is constructed of the following sections:
-Page Header (suppressed on page 1)
-Grp1 header A (watermark conditionally suppressed based upon a parameter)
-Grp1 header B (Keep together - always fits onto a single page)
-Details
-Grp1 footer A (Keep together)
-Grp1 footer B (Conditionally suppressed based upon data)
-Grp1 footer C (Keep together)
-Grp1 footer D (Contains sub report(suppressed when blank). Keep together. Suppress blank section. New page before but (Not OnLastRecord))
-Grp1 footer E (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
-Grp1 footer F (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
-Grp1 footer G (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
-Report footer (Always blank. Suppress blank section)
-Page footer (Fixed static content, displayed on every page.)
Edited by: alibaabaa on Oct 12, 2009 12:41 PM
Edited by: alibaabaa on Oct 12, 2009 12:45 PM

Thanks for responding, Jonathan.
Is the same runtime installed on the 64 bit system? I notice from your version number that you do not have any service packs installed on the dev system. SP 2 is out and may help.
I have installed SP1 and SP2 this morning, resaved the report file and tried again but the same problem remains.
I'm not sure how to answer your runtime question. I am using the same application built with the same merge modules on both the dev machine and the production server. Of course, the dev machine has the additional complication of having Crystal Reports 2008 installed. Perhaps this is causing the difference?
Compare the printer settings between the two systems. Try installing the same printer driver on the 64 bit system.
Perhaps I am misinterpreting your suggestion, but I am not printing the invoices. I am only exporting them to PDF. It is the PDF that has the extra page. Is there a 'print to PDF' driver of some sort that I need?
Also, was the .NET application compiled as 32 bit, or Any CPU? Whichever it was, try switching it then recompiling to see if that helps.
I tried switching to Any CPU but this caused the Crystal Reports module not to load at all on the 64bit Windows server.
Thank you for your suggestions, but my problem remains. Is it worth trying with the redistributable msi rather than using the merge modules? If so, could you recommend which one I should use? I am using Visual Studio 2008 Professional.

Report Server asking for credential as home page

Hi,
I have a user that when she tries to logon to Report Manager the system asks for her credentials and then denies permission.
We have even tried enhancing her permissions to the same level as mine (full admin) , but it asks for her credentials and denies permission.
Can anybody help?
Mr Shaw

Hi Mr Shaw,
Based on my understanding, when a user access report manager, credential entry pops up and the user account doesn’t work, right?
In Reposting Service, RSWindowsNegotiate is added to the RSReportServer.config file by default. Negotiate specifies report server can either accept Kerberos or NTLM authentication tokens. In this scenario, the issue could be caused by Kerberos authentication.
If there is a mismatch between the destination specified in the token and the report server process configuration, the underlying Kerberos authentication scheme supported by Windows will prevent report server from authenticating the user. So please refer to
methods below to fix the issue:
• Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the Reporting Services configuration file (in SSRS 2012, this file locates at xx:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config).
• Change the report server service account to Network Service.
• Configure a specific hostheader for SSRS, configure your DNS server to understand that hostheader, and configure your domain controller to have an SPN for the hostheader and the report server service account.
For detail information, please refer to this article:
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008.
Reference:
Authentication with the Report Server
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Unable to view PDF output from Report Server

Help!
I have successfully setup CGI Report Server and can generate and view reports in IE5 as HTML repformat.
However when I try to generate output as PDF I do not get the report displayed. Instead I get a little acrobat icon displayed in the top left of the browser window.
When I click on the icon I get a IE5 message:
"There is no viewer available for the type of object you are trying to open....
Content Type: application/pdf"
...and then insists on taking me to Microsoft activex plugin page.
This is very stange as I DO have Adobe Acrobat Reader 4 installed and the plugin works ok when viewing PDF files on Oracle webpage.
Any suggestions on how to resolve are gratefully received!!
Regards,
Richard.

You have run into an interesting problem. The problem is not with Reports. The problem is with Adobe. You can search Adobe's web site and they point to Microsoft (btw, this problem doesn't occur with netscape as the browser) Microsoft's web site point to Adobe.
The Problem is that the .ocx Adobe puts out for use with IE times out if the report take stoo long to start sending back data. We had report that worked and some that didn't. We took a report that worked and put a sleep command in it and when the sleep command got to 10 the report quit working.
My suggestion: move to netscape, make your reports as fast as absolutely possible.
Jeff
null

Crystal Reports Server 2008 dispose not closing document

Hey everyone,
I;m running some reports through Crystal reports 2008 server (no service packs) using the RAS sdk and Java.
This was working swimmingly for a while until yesterday when the server hosting the RAS and app server fell over. I tracked it down to a problem with the RAS server. The error i got in my logs was General Exception, Report SDK Exception Not enough memory for operation. I reran the process and when i watched task manager the memory being allocated to crystalras.exe went through the roof! it went from 50k to 1.8g of ram in under 10 minutes.
I tried lots of the other suggestions in here for the errors about memory that are similar to mine (increasing the heap memory etc.) and none of them worked.
One thing i noticed though is that when I run the process and watch the metrics page of the RAS server on the management console the number of Open documents does not decrease even though i am 100% totally and utterly calling .close and .dsipose after every report i open. Definitely. Ive debugged it a million times and it is calling these methods. It is successfully releasing the connections fine but does not seem to releasing the open documents. After the Open documents metric went down to 0 (im presuming after a timeout) the memory that crystalras.exe was reduced. I then changed the timeout tag in CRConfig.xml to 1 minute to see would this help out any but the open documents did not timeout any faster.
Would i be right in thinking that these open documents would be causing my problem of the aggregated memory? Im at my wits end here so any piece of help is greatly appreciated!

Hi Ted,
Thank you for getting back to me, i was on vacation there for a while so that is why i didnt get back to you.
When I call reportClientDocument.isOpen() just before i dispose of the report it is true and after i dispose of it it correclty returns false.
I am really stressing out over this as we are reduced to running 500 reports through the server (one after another) and then stopping the process and restarting the RAS server and then running another 500 reports.
crystalras.exe gets up to about 2g of ram consumed for only 500 reports.
I even changed some of the timeout settings on the settings page of the management console to see would they timeout and release the memory but alas it didnt release as much as a byte. I left it for 3 days and it didnt deallocate one piece of memory.
Im currently investigating is there some way from my code that I can restart the RAS server, either through the SDK or through a windows process or scheduled task.
Ted, as far as i can see there are no service packs for Crystal Reports Server 2008, is that right? when i go to the downloads page there only ones listed for release X1.
Thank you for your help.
J.

Unable to start Oracle Reports Server for 10g version 10.1.2.3.0

Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>



</cache>


<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">


</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>

<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>




<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:758)
     at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
     at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+

OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam          (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall

SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?

Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result)
   at System.Version.Parse(String input)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result)
   at System.Version.Parse(String input)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session Ended

Hi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Label Printing issues on Crystal Reports Server

I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?

I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G

Report Server Engine freezes for 30 seconds and more

Hi all,
I have problems with Report Server and reports execution.
Customer complains slowness in the execution in many reports that were fast.
Before: 4-5 seconds
Now : 25-30 seconds
I turned on server and engine trace and i saw that no log is written for 25 seconds in a report execution.
My environment:
DB: Oracle 11R2
Report Server: 10.1.2.3.0
I changed some parameters in server.conf:
cacheSize= "200" (from default value 20 - cache dir contains 950files for 150Mb)
initEngine= "1"
maxEngine= "4"
diagnosis value="yes" (to write .dig file)
<trace traceFile="E:\REPORTS\Log\reportServer.trc" traceOpts="trace_all" traceMode="trace_replace" traceModule="all" />
maxConnect="120" (from default value 20)
The SQL query takes 0.2 seconds.
Here the logs:
In reportServer.trc
[2012/2/8 6:7:0:901] Info 50132 (JobObject:reset): jobid = 134138 Get command line: REPORT=E:\REPORTS\aq\aq_sit_ord_abbin.RDF
USERID='...' ORIENTATION="LANDSCAPE" PARAMFORM="NO" DESTYPE="PREVIEW" <PARAMETERS> BATCH=YES DESTYPE=cache DESFORMAT=PDF
AUTHID="ANONYMOUS"
[2012/2/8 6:7:0:901] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 134138 is 0
[2012/2/8 6:7:0:901] Debug 50103 (ConnectionImpl:runJob): jobid = 134138 is in current queue
[2012/2/8 6:7:0:901] Debug 50103 (ConnectionImpl:runJob): Calling findDuplicatedJob for jobid = 134138
[2012/2/8 6:7:0:901] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 134138
[2012/2/8 6:7:0:901] Debug 50103 (ConnectionImpl:runJob): No Duplicate jobs for jobid = 134138
[2012/2/8 6:7:0:901] Debug 50103 (ConnectionImpl:runJob): Job 134138 is Enqueued
[2012/2/8 6:7:0:901] Debug 50103 (JobManager:firstToRun): job 134138 is first to run
[2012/2/8 6:7:0:901] Debug 50103 (JobManager.runJobLocal): Trying to get engine for Job 134138
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:getIdleEngine): Target max engines = 4
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 is used = true
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 state is 1
[2012/2/8 6:7:0:901] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2012/2/8 6:7:0:901] Debug 50103 (JobManager.runJobLocal): Job 134138 got Engine rwEng-0
[2012/2/8 6:7:0:901] Debug 50103 (JobManager:runJobInEngine): Job 134138 calling setCommand on engine rwEng-0
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2012/2/8 6:7:0:901] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 5
[2012/2/8 6:7:0:901] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2012/2/8 6:7:0:901] Debug 50103 (JobManager:runJobInEngine): Send job 134138 to engine rwEng-0
[2012/2/8 6:7:0:901] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
*[2012/2/8 6:7:0:901] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running*
*[2012/2/8 6:7:26:714] State 56016 (JobManager:updateJobStatus): Job 134138 status is: Running the report Initializing report*
[2012/2/8 6:7:26:714] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 134138
[2012/2/8 6:7:27:104] State 56016 (JobManager:updateJobStatus): Job 134138 status is: Running the report Formatting page 1
[2012/2/8 6:7:27:104] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 134138
[2012/2/8 6:7:27:432] State 56016 (JobManager:updateJobStatus): Job 134138 status is: Running the report Formatting page 1
[2012/2/8 6:7:27:432] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 134138
[2012/2/8 6:7:27:823] Debug 50103 (RWCacheItem:addFile): add file 'B66ST519.pdf' for job 134138
[2012/2/8 6:7:27:823] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 61232723
[2012/2/8 6:7:27:839] State 56016 (JobManager:updateJobStatus): Job 134138 status is: Finished successfully
[2012/2/8 6:7:27:839] Debug 50103 (JobManager:notifyWaitingJobs): Master job 134138 notify its duplicated jobs.
[2012/2/8 6:7:27:839] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 134138
[2012/2/8 6:7:27:839] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2012/2/8 6:7:27:839] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2012/2/8 6:7:27:839] Info 56013 (ConnectionManager:release): Connection 294 is released
[2012/2/8 6:7:27:839] Info 56013 (ConnectionManager:release): Connection 295 is released
In rwEng-0.trc
[2012/2/8 6:7:0:901] Debug 50103 (EngineImpl:setCommandLine): Running
[2012/2/8 6:7:0:901] Info 50132 (EngineImpl:setCommandLine): Get command line: <...>
[2012/2/8 6:7:0:901] Debug 50103 (EngineImpl:setCommandLine): Quit
*[2012/2/8 6:7:0:901] Debug 50103 (EngineImpl:run): Running Jobid=134138*
*[2012/2/8 6:7:26:667] DST 50103 (C Engine) System parameter BACKGROUND is obsolete.*
[2012/2/8 6:7:26:714] DST 50103 (rwfdt:rwfdtprint) Distributing the report
[2012/2/8 6:7:26:714] DST 50103 (rwfdt:rwfdtpredo) running
[2012/2/8 6:7:26:714] DST 50103 (rwfdt:rwfdtpredo) no preformat of pages requested, quit
[2012/2/8 6:7:27:823] DST 50103 (C Engine) 18:07:27 DST aq_sit_ord_abbin: desformat=PDF destype=cache copies=1 level=Report
[2012/2/8 6:7:27:823] DST 50103 (rwfdt:rwfdtfl_FreeDistList) running
[2012/2/8 6:7:27:823] DST 50103 (rwfdt:rwfdtfl_FreeDistList) quit
[2012/2/8 6:7:27:839] Debug 50103 (EngineImpl:run): CRunReport returns: 0
[2012/2/8 6:7:27:839] Debug 50103 (EngineImpl:run): Quit
What has happened in those 26 seconds?
In rwEng-0-j-2012-02-08_17-15-01.dig
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:setCommandLine): Before calling EngineComm.updateEngineState(STATE_RUNNING)
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:setCommandLine): After calling EngineComm.updateEngineState(STATE_RUNNING)
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:setCommandLine): Before calling EngineComm.updateEngineState(STATE_IDLE)
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:setCommandLine): After calling EngineComm.updateEngineState(STATE_IDLE)
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:run): Before calling EngineComm.updateEngineState(STATE_RUNNING)
[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:run): After calling EngineComm.updateEngineState(STATE_RUNNING)
*[2012/2/8 18:7:0:901] Diagnosis (EngineImpl:run): Before calling CRunReport()*
*[2012/2/8 18:7:26:714] Diagnosis (EngineImpl:updateJobStatus): Enter*
[2012/2/8 18:7:26:714] Diagnosis (EngineImpl:updateJobStatus): Before calling EngineComm.updateEngineJobStatus()
[2012/2/8 18:7:26:714] Diagnosis (EngineImpl:updateJobStatus): After calling EngineComm.updateEngineJobStatus()
[2012/2/8 18:7:26:714] Diagnosis (EngineImpl:updateJobStatus): Exit
Thanks in advance.
Best regards.
Alessandro Zenoni

Any suggest??
Another very strange thing: the problem is only in the afternoon.
From 7am to 1pm , reports are fast!
Thanks in advance.
Best regards.
Alessandro Zenoni
Edited by: Alessandro Zenoni on 10-feb-2012 11.01

Report Server Success Page

Similar Messages

Maybe you are looking for