Report Server Vs Reports Engine

Hi,
Could someone explain the difference between report server and a report engine (advantages vs disadvantages)?
What does lifes remaiming means on a reports engine?
On a 100+ user system, which is better, mulitple reports servers or higher reports engine setting?
Thanks
Edited by: 913146 on 08-Feb-2012 02:35

Hi,
About engLife,you can get the details from the below link.:)
You will also get the information of other report server parameters
http://docs.oracle.com/html/A9210201/pbr_tune.htm#1005700_
Difference between report server and a report engine
Report engine is a part of Report server..When ever a report server starts then the report engine gets initialized and gets available at the same time.
If Report server is down,Report Engine also goes down.
which is better mulitple  reports servers or higher reports engine setting?
Now consider this example,
If you have set you Max and Min engine to 3,
Now assume,3 users have simultaneously sent request to execute a report.
These 3 request will be handled by 3 engines available in the report server.
Now in between this,if the 4th user tries to execute another report..since all the engines are full,this request will be in the queue and will be executed once any report engine gets free.
Multiple report server will be helpful,As the load gets balanced between different report servers.
Regards
Fabian

Similar Messages

  • Report Engine rwEng-0 crashed when server startup

    I installed 9ias on RedHat Linux, and applied the latest patches(Core patch 2, NT patch 1, form&report patch 2).But when I start the report server(in-process server).
    The report server's log shows:
    ** 2003/5/19 8:51:9:297 -- Reports Server is starting up
    *** 2003/5/19 8:51:24:418 -- Reports Server started up engine rwURLEng-0
    *** 2003/5/19 8:51:31:892 -- Reports Server started up engine rwEng-0
    *** 2003/5/19 8:51:32:956 -- Engine rwEng-0 crashed
    Then I run a report with the web browser, after single sign-on login interface, the browser is hang, then shows
    REP-51026: No output for job 19
    Some new lines append in the log file:
    *** 2003/5/19 9:7:2:980 -- Reports Server started up engine rwEng-0
    *** 2003/5/19 9:7:9:633 -- Reports Server started up engine rwEng-1
    *** 2003/5/19 9:7:15:994 -- Reports Server started up engine rwEng-2
    *** 2003/5/19 9:7:23:226 -- Reports Server started up engine rwEng-3
    *** 2003/5/19 9:7:30:328 -- Reports Server started up engine rwEng-4
    *** 2003/5/19 9:21:24:827 -- Reports Server shut down engine rwURLEng-0
    *** 2003/5/19 9:21:30:413 -- Reports Server started up engine rwURLEng-0
    I sent the request again, the browser shows:
    REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
    Anyone can help me?

    Thanks for your advice,I try it , when startup, no error in the reportserver.trc file, but when I send a request from the web , it shows:
    [2003/5/20 2:59:7:975] Debug 56031 (ConnectionImpl:runJob): Job 1 is waiting for
    notification
    [2003/5/20 2:59:8:919] Info 56020 (EngineManager:spawnEngine): Launching engine
    rwURLEng-0
    [2003/5/20 2:59:8:919] Debug 50103 (EngineManager:spawnEngine): Start engine com
    mand line = /oracle/product/app/bin/rwengine.sh -cp /oracle/product/app/j2ee/hom
    e/lib/ojsp.jar:/oracle/product/app/reports/jlib/rwrun.jar:/oracle/product/app/jl
    ib/zrclient.jar -XX:+AllowUserSignalHandlers -XX:CompileThreshold=20000 -Xmx128M
    oracle.reports.engine.RWEngine name=rwURLEng-0 server=rep_app_server ORACLE_HOM
    E=/oracle/product/app engineimplclass=oracle.reports.urlengine.URLEngineImpl tra
    ceopts=trace_all tracefile=/oracle/product/app/reports/logs/rep_app_server-rwURL
    Eng-0.trc tracemode=trace_replace cacheDir=/oracle/product/app/reports/cache
    [2003/5/20 2:59:8:969] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0
    has been launched
    [2003/5/20 2:59:8:970] State 56004 (EngineInfo:setState): Engine rwURLEng-0 stat
    e is: Initial
    [2003/5/20 2:59:19:841] Exception 50125 (exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=55103,
    java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
    engine",
    java.lang.String moduleName="REP"
    at oracle.reports.RWExceptionHelper.read(Unknown Source)
    at oracle.reports.engine._EngineClassStub.getEnvs(Unknown Source)
    at oracle.reports.server.EngineManager$TimedPingerThread.run(EngineManag
    er.java:1581)
    ): Internal error exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=55103,
    java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
    engine",
    java.lang.String moduleName="REP"
    [2003/5/20 2:59:19:842] Warning 50103 (EngineManager:registerEngine): REP-55103:
    API URLEngine:getEngineEnvs not applicable to URL engine
    report_server.log shows:
    *** 2003/5/20 2:56:53:703 -- Reports Server is starting up
    *** 2003/5/20 2:59:19:842 -- Reports Server started up engine rwURLEng-0
    *** 2003/5/20 2:59:25:94 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:26:164 -- Engine rwEng-0 crashed
    *** 2003/5/20 2:59:32:439 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:35:302 -- Engine rwEng-0 crashed
    *** 2003/5/20 2:59:42:88 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:44:472 -- Engine rwEng-0 crashed
    I still get "REP-56048: Engine null crashed, job Id: 1
    " on the web.

  • Could not initialize Report Engine server. (Error: RWI 00226)

    Hi All,
    I am trying to export a webi report from a Java application. When I connect to XI R3.1 report server, it is throwing me the following error. The error is at the line
    DocumentInstance boDocumentInstance = boReportEngine.openDocument(infoObject.getID());
    I amable to connect to the BO server and get the list of reports but when I try to open the document after getting the service(boReportEngines.getService(...), no error at this point), it is throwing the following error. I tried to restart the report server and the CMS server, but it is still giving this error. Any pointer is appreciated.
    The Report Export Failed!com.businessobjects.rebean.wi.CommunicationException: Could not initialize Report Engine server. (Error: RWI 00226)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:243)
         at com.businessobjects.rebean.wi.occa.OccaConnection.<init>(OccaConnection.java:67)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.createCadenzaSession(OccaReportEngineComAdapter.java:322)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.initNewCadenzaSession(OccaReportEngineComAdapter.java:410)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.openDocument(OccaReportEngineComAdapter.java:152)
         at com.businessobjects.rebean.wi.ReportEngineImpl.openDocument(ReportEngineImpl.java:391)
         at com.businessobjects.rebean.wi.occa.WebiReportEngine.openDocument(WebiReportEngine.java:191)
         at com.infostep.ext.step.BOReportNode.openBOWebiReport(BOReportNode.java:307)
         at com.infostep.ext.step.BOReportNode.openBOReport(BOReportNode.java:860)
         at com.infostep.ext.step.BOReportTestNodeEditor$6.doCallback(BOReportTestNodeEditor.java:519)
         at com.itko.util.swing.panels.ProcessingDialog$2.run(ProcessingDialog.java:248)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:291)
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:121)
         ... 11 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
         at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:359)
         ... 25 more
    Thanks,
    Sulagna

    Hi,
    Did you find a solution to this issue? I am having exacty the same problem and I can't find a solution for this.
    Thanks
    J. Russell

  • Getting error "Cannot initialize Report Engine server. (RWI 00226)"

    Hello All,
    We have BO XI 3.1 running on AiX 5.3 and db2 9.5 with fixpack 6.
    I am getting error "Cannot initialize Report Engine server. (RWI 00226)" Whenever i am trying to create a document or report.
    We were not getting this error earlier. getting it since few days.
    currently our web intelligence processing server is not running and showing the status as "initializing and disabled".
    every time when i tried to restart web intelligence processing server,it is going to initializing status only.
    I tried to enable the trace for this server but it is not allowing me to do and throughing the error " Configuration, auditing or enable/disable state change rejected; server SIA.WebIntelligenceProcessingServer is currently being initialized."
    I also tried creating a new instance of web intelligence processing server, even it has also gone to "initializing" status all the time.
    Environment Information:
    BOXI 3.1 SP2
    OS: AIX 5.3
    DB: DB2 9.5 Fix pack 6
    Plese help in resolving this issue.
    Thanks & Best Wishes,
    Sachin.

    Hi,
    Thanks for your prompt response.
    I already tried the solution provided by you. I stopped BO server completely and restarted it again but it does not worked for me.
    I have stopped the old Web intelligence processing server and created a new instance and started, but the new one has not started but going to initializing status.
    It even not allowing me to delete the newly created instance, saying that it is still in initializing status.
    Please suggest me if anything else i need to check.
    Thanks in advance.
    Best Regards,
    Sachin

  • Minimum hardware requirement for Report server with 4 engines ??

    Hello all ,
    Can someone please tell what is the minimun Hardware requirement to be able to run a Oracle 91 AS with report server having 4 engines ??
    and where I can find this kind of documentation.
    We have a Oracle9iAS Containers for J2EE running on a machine with under 1 ghz power and around 300 mb RAM
    , but the report server seems to keep crashing ..
    Can anyone pls advice
    Thanks

    Hi,
    For calculating the minimum hardware requirements, you may need to look at various factors:
    1. No of reports requests that need to be processed per second
    2. Whether all these requests are synchronous or asynchronous
    3. Response time required
    4. Type of reports - large amounts of data, large no of images, etc
    5. How much caching you are using
    6. No of queries in your report
    7. Simple / complex layout of the report
    and so on.
    So just the information of 4 engines may not be sufficient for trying to calculate the hardware requirements. One useful reference point for you may be the Oracle9i Reports Scalability whitepaper:
    http://otn.oracle.com/products/reports/index.html
    It lists the number of users supported on some pre-defined hardware configurations, and the average response time for the reports server.
    You might also want to take a look at the paper on "Tuning Oracle Reports":
    http://otn.oracle.com/products/reports/htdocs/search.html?cat=SAP&col=ALC&submit=Search
    However, it is also possible that your Reports Server is crashing due to some other problem (not the hardware configuration).
    By the way, your RAM seems to be too low for Oracle9iAS installation. See the installation guide for minimum hardware requirements.
    Navneet.

  • Report Engine error in BO XI R3.1

    I am using BO XI R 3.1 to connect to BO R3 Report Server. While trying to open a report from the server, i am getting the following error.
    Could not initialize Report Engine server. (Error: RWI 00226)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:230)
         at com.businessobjects.rebean.wi.occa.OccaConnection.<init>(OccaConnection.java:66)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.createCadenzaSession(OccaReportEngineComAdapter.java:294)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.initNewCadenzaSession(OccaReportEngineComAdapter.java:345)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.openDocument(OccaReportEngineComAdapter.java:149)
         at com.businessobjects.rebean.wi.ReportEngineImpl.openDocument(ReportEngineImpl.java:387)
         at com.businessobjects.rebean.wi.occa.WebiReportEngine.openDocument(WebiReportEngine.java:187)
         at com.jpmorgan.extraclear.mcri.BOWebiTest.main(BOWebiTest.java:56)
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    Please someone help me out with this issue.

    Hi Shruti,
    Were you able to resolve this issue? Of so, can you please post the resolution too in this forum.
    I am facing the same issue at the same line
    boReportEngine.openDocument (...)
    And the error is the same too as below
    The Report Export Failed!com.businessobjects.rebean.wi.CommunicationException: Could not initialize Report Engine server. (Error: RWI 00226)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:243)
         at com.businessobjects.rebean.wi.occa.OccaConnection.<init>(OccaConnection.java:67)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.createCadenzaSession(OccaReportEngineComAdapter.java:322)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.initNewCadenzaSession(OccaReportEngineComAdapter.java:410)
         at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.openDocument(OccaReportEngineComAdapter.java:152)
         at com.businessobjects.rebean.wi.ReportEngineImpl.openDocument(ReportEngineImpl.java:391)
         at com.businessobjects.rebean.wi.occa.WebiReportEngine.openDocument(WebiReportEngine.java:191)
         at com.infostep.ext.step.BOReportNode.openBOWebiReport(BOReportNode.java:307)
         at com.infostep.ext.step.BOReportNode.openBOReport(BOReportNode.java:853)
         at com.infostep.ext.step.BOReportTestNodeEditor$6.doCallback(BOReportTestNodeEditor.java:519)
         at com.itko.util.swing.panels.ProcessingDialog$2.run(ProcessingDialog.java:248)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)

  • Report engine(rwrun60) is crashing one by one

    Below is the setting of my reports server parameter on 11.5.10.2.
    maxconnect=300
    cachedir="/u02/EPFH/epfhora/8.0.6/reports60/server/cache"
    cachesize=1000
    minengine=16
    maxengine=24
    initengine=16
    maxidle=30
    security=1
    englife=50
    mailprofile="$Header: REP60_server.ora 115.6 2004/11/30 05:20:55 ptiwari ship $"
    nlssupport=yes
    The number of engines starts with 16 and goes up also, but after handling few number of requests, it shutdown one by one and finally one engine left.(The minserver is 16).
    I suspect when memory acquired by report server(rwmts60) is growing, it is not able to restart the report engine.
    What is the cause the report engine is not able to keep 16 engines as specified. We have esingle node application with 8 cpus.
    One peak the load is as below.
    load averages: 3.11, 3.92, 4.23 13:09:24
    550 processes: 542 sleeping, 1 zombie, 5 stopped, 2 on cpu
    CPU states: 73.4% idle, 18.5% user, 8.1% kernel, 0.0% iowait, 0.0% swap
    Memory: 16G real, 6746M free, 12G swap in use, 33G swap free
    Regards,
    Mushir

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    You can check for corrupted and duplicate fonts and other font issues:
    *http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
    *http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

  • Report Engine SDK sample code questions

    Hello,
    I've been able to view a boxi report in an iframe via the Enterprise SDK by modifying the sample code in the HowToViewWebiReports_VB example.
    I'm not totally happy with the way that's working, so I'm looking at using the Report Engine SDK, although I understand it's performance and scalability isn't quite as good as the Enterprise SDK.
    I'm a VB.NET guy, not a C# guy, and I'm not clear on how the wssdk_net2.0_portal_sample_12.0_en example is supposed to work.
    I don't have one and my CMS server is running Tomcat, not IIS so there's not going to be an ASP.NET web service running there.
    In the dsws.config for the wssdk_net2.0_portal_sample_12.0_en example I put the name of the CMS server, but it's looking for a web service at http://cmsservername:8080/dswsbobje/services/Session, but I get a 404 when i try to hit that. 
    I'm not familiar with Tomcat, but in searching around on the server, I see a dswsbobje directory under the webapps in my Tomcat installation, but I don't see a services or a Session folder underneath that.  In the dswsbobje folder I see the following folders:
    BOAR-INF
    META-INF
    WEB-INF
    xsd
    Is there something else that needs to be installed on the Tomcat server to get the web service running?
    -Eric

    It looks like I have something there.  When I launch launch http://servername:8080/dswsbobje,  I see:
    Apache-AXIS
    Hello! Welcome to Apache-Axis.
    What do you want to do today?
    Validate the local installation's configuration
    see below if this does not work.
    To enable the disabled features, uncomment the appropriate declarations in WEB-INF/web.xml in the webapplication and restart it.
    Validating Axis
    If the "happyaxis" validation page displays an exception instead of a status page, the likely cause is that you have multiple XML parsers in your classpath. Clean up your classpath by eliminating extraneous parsers.
    I clicked on the "Validate" link and I see:
    Axis Happiness Page
    Examining webapp configuration
    QaaWS Configuration
    QaaWS Servlet is not valid.
    ErrorServer servername not found or server may be down
    See Web Application log to get more info or read QaaWS v2 documentation starting with section
    Perhaps this environment needs some additional configuration?

  • Report Engine crashing on Solaris when report with graph is given.

    Hi,
    We are using following environment:
    Solaris 8
    Oracle 9i Report Sevices.
    When we try to execute reports having graphs then the report engine crashes with the following exception:
    REP-0177: Error while running in remote server
    REP-56048: Engine rwEng-0 crashed
    The complete crash log is also appendend in the end of this mail.
    When I remove the graph from the rdf then reports get exectued fine without any crash. The same rdg with graph works fine on windows NT.
    If somebody can help on this, it will be great.
    Thanks,
    Ashish
    The complete crash log is as follows:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xf017b350
    Function name=_Xm21FreeHashTable
    Library=/usr/lib/libXm.so.4
    Current Java thread:
         at sun.awt.motif.MWindowPeer.create(Native Method)
         at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
         at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
         at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
         at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
         at java.awt.Frame.addNotify(Frame.java:353)
         at java.awt.Window.pack(Window.java:369)
         at tdg.Perspective.<init>(Perspective.java:478)
         at oracle.dss.graph.PFJ.<init>(PFJ.java:47)
         at oracle.dss.graph.Graph.createPFJ(Graph.java:1190)
         at oracle.dss.graph.Graph._setupGraphView(Graph.java:353)
         at oracle.dss.graph.Graph.<init>(Graph.java:164)
         at oracle.reports.chart.Chart.<init>(Chart.java:51)
         at oracle.reports.chart.ChartRunner.<init>(ChartRunner.java:46)
         at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
         at oracle.reports.engine.EngineImpl.run(EngineImpl.java:289)
         at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
         at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
         at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
         at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
         at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
         at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
    Dynamic libraries:
    0x10000      /users/orarep9i/OraHome1/jdk/jre/bin/../bin/sparc/native_threads/java
    0xff350000      /usr/lib/libthread.so.1
    0xff390000      /usr/lib/libdl.so.1
    0xff200000      /usr/lib/libc.so.1
    0xff330000      /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
    0xfe480000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/client/libjvm.so
    0xff2d0000      /usr/lib/libCrun.so.1
    0xff1d0000      /usr/lib/libsocket.so.1
    0xff100000      /usr/lib/libnsl.so.1
    0xff0d0000      /usr/lib/libm.so.1
    0xff310000      /usr/lib/libw.so.1
    0xff0b0000      /usr/lib/libmp.so.2
    0xff080000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/native_threads/libhpi.so
    0xff040000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libverify.so
    0xfe440000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libjava.so
    0xfe410000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libzip.so
    0xf3be0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libnet.so
    0xf3bc0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libioser12.so
    0xf39e0000      /usr/lib/nss_nis.so.1
    0xf2000000      /users/orarep9i/OraHome1/lib/librw90.so
    0xf1d00000      /users/orarep9i/OraHome1/lib/libobx90.so.0
    0xf36b0000      /users/orarep9i/OraHome1/lib/librws90.so.0
    0xf2a80000      /users/orarep9i/OraHome1/lib/libde90.so.0
    0xf2fc0000      /users/orarep9i/OraHome1/lib/libucol90.so.0
    0xf39b0000      /users/orarep9i/OraHome1/lib/libuicc90.so.0
    0xf2ea0000      /users/orarep9i/OraHome1/lib/libca90.so.0
    0xf35e0000      /users/orarep9i/OraHome1/lib/libmma90.so.0
    0xf2dc0000      /users/orarep9i/OraHome1/lib/libmmiw90.so.0
    0xf3860000      /users/orarep9i/OraHome1/lib/libmmov90.so.0
    0xf2f90000      /users/orarep9i/OraHome1/lib/libmmos90.so.0
    0xf2cc0000      /users/orarep9i/OraHome1/lib/libmmoi90.so.0
    0xf32e0000      /users/orarep9i/OraHome1/lib/libmmia90.so.0
    0xf2da0000      /users/orarep9i/OraHome1/lib/libmmft90.so.0
    0xf1fc0000      /users/orarep9i/OraHome1/lib/libmmcm90.so.0
    0xf1c00000      /users/orarep9i/OraHome1/lib/libvgs90.so.0
    0xf2ca0000      /users/orarep9i/OraHome1/lib/libuihx90.so.0
    0xf1b90000      /users/orarep9i/OraHome1/lib/libuc90.so.0
    0xf1b20000      /users/orarep9i/OraHome1/lib/libuipr90.so.0
    0xf1900000      /users/orarep9i/OraHome1/lib/libuimotif90.so.0
    0xf1ae0000      /users/orarep9i/OraHome1/lib/libot90.so.0
    0xf18a0000      /users/orarep9i/OraHome1/lib/librem90.so.0
    0xf1820000      /users/orarep9i/OraHome1/lib/libree90.so.0
    0xf1fa0000      /users/orarep9i/OraHome1/lib/librec90.so.0
    0xf17f0000      /users/orarep9i/OraHome1/lib/libuiimg90.so.0
    0xf17b0000      /users/orarep9i/OraHome1/lib/libuia90.so.0
    0xf2a60000      /users/orarep9i/OraHome1/lib/libtknqap90.so.0
    0xf1780000      /users/orarep9i/OraHome1/lib/libutt90.so.0
    0xf1750000      /users/orarep9i/OraHome1/lib/librod90.so.0
    0xf1720000      /users/orarep9i/OraHome1/lib/libror90.so.0
    0xf16f0000      /users/orarep9i/OraHome1/lib/libros90.so.0
    0xf16c0000      /users/orarep9i/OraHome1/lib/libuat90.so.0
    0xf16a0000      /users/orarep9i/OraHome1/lib/libdfc90.so.0
    0xf1680000      /users/orarep9i/OraHome1/lib/libutc90.so.0
    0xf1660000      /users/orarep9i/OraHome1/lib/libutj90.so.0
    0xf1630000      /users/orarep9i/OraHome1/lib/libutl90.so.0
    0xf1610000      /users/orarep9i/OraHome1/lib/libsl90.so.0
    0xf0c00000      /users/orarep9i/OraHome1/lib/libclntsh.so.9.0
    0xf15f0000      /users/orarep9i/OraHome1/lib/libwtc9.so
    0xf15d0000      /usr/lib/libsched.so.1
    0xf15b0000      /usr/lib/libaio.so.1
    0xf0a00000      /usr/lib/libXm.so.3
    0xf1540000      /usr/lib/libXt.so.4
    0xf0900000      /usr/lib/libX11.so.4
    0xf1520000      /usr/lib/libgen.so.1
    0xf1500000      /usr/lib/librt.so.1
    0xf14e0000      /usr/lib/libSM.so.6
    0xf14b0000      /usr/lib/libICE.so.6
    0xf1480000      /usr/lib/libXext.so.0
    0xf0bd0000      /usr/openwin/lib/libdga.so.1
    0xf0bb0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libawt.so
    0xf0280000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/motif21/libmawt.so
    0xf09b0000      /users/orarep9i/OraHome1/jdk/jre/bin/../lib/sparc/libmlib_image.so
    0xf0000000      /usr/lib/libXm.so.4
    0xf08e0000      /usr/openwin/lib/libXtst.so.1
    0xeff00000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libfontmanager.so
    0xf07a0000      /usr/openwin/lib/libdps.so.5
    Local Time = Fri Apr 18 09:22:09 2003
    Elapsed Time = 110
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)

    Please try the following
    * Modify $ORACLE_HOME/bin/reports.sh, replace "classic"
    with "server" in the LD_LIBRARY_PATH for the JVM
    * Modify $ORACLE_HOME/bin/rwengine.sh, just before the exec
    command, insert the following line:
    export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/i386/libawt.so
    In Linux there was a similar problem and the above workaround worked . You can give this a try .
    Thanks
    The Oracle Reports Team

  • Report Engine SDK: CommunicationException when accessing IReportEngine members

    Hello,
    I have installed BOXI 3.1 SP3, including the .NET SDK, and I am trying to use the Report Engine SDK part to navigate through a WebIntelligence document (analyse its structure, etc.), via a Console App.
    I built my console app targeting .NET framework 3.5, and compiled it in 32 bits mode (x86 platform). I can access the standard SDK without any problem and log in to the CMS then retrieve any InfoObject instances from my enterprise server.
    My problem occurs when I try to access my BusinessObjects.ReportEngine.IReportEngine instance's members. Sample lines of code:
    SessionMgr sessionManager = new SessionMgr();
    EnterpriseSession session = sessionManager.Logon(login, password, cmsName, authType);
    InfoStore infoStore = (InfoStore)session.GetService("InfoStore");
    UserInfo userInfos = session.UserInfo;
    string logonToken = session.LogonTokenMgr.CreateWCAToken("", 1, -1);
    ReportEngines reportEngines = new ReportEngines(logonToken);
    IReportEngine reportEngine = (IReportEngine)reportEngines.getService(ReportEngineType.WI_ReportEngine);
    bool test = reportEngine.IsReady; // or any other member of reportEngine, like reportEngine.OpenDocument(...)
    An exception of type 'BusinessObjects.ReportEngine.CommunicationException' occured.
    Message:
    The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236), Session Init Failure,
    Stacktrace:
       à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.Connect(Boolean forceNewInstance)
       à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub..ctor(OCCAServerConnection connection, Boolean forceNewInstance)
       à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerConnection.get_Stub()
       à BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.SetupStub()
       à BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller..ctor(IServerSession session, IServerProtocol protocol, IServerConnectionInfo info)
       à BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId, OpenDocumentParameters parameters)
       à BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
       à BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.GetAnyServerInstance()
       à BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.get_IsReady()
    What do you suggest?

    Hi,
    Enterprise / ReportEngine SDK is not supported / tested / compatible with desktop / console apps.
    Could you try the same logic with a web services sdk, as WebServices SDk is the only SDK which could be used to develop thick client apps.
    - Bhushan
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Report engin is not working

    Dear All
    I have install Forms6i and Report6i on client machine and give exact path of server and also mention net 8 service and also give path of reports and forms. my form are running correct but my eports are not working and i notice when i run my report then report engin is not come on status bar, please let me know the solutions
    Thanks in Advance
    Regard

    Hello,
    The problem may be a PATH problem.
    Start the reports server after having set the PATH :
    set ORACLE_HOME=d:\oracle\ods1012
    set PATH=%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\jre\bin\client;%ORACLE_HOME%\jlib;%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\bin;%ORACLE_HOME%\jre\1.4.2\bin\client;%ORACLE_HOME%\jre\1.4.2\bin;
    Regards

  • Integration with a Reporting Engine Web Service

    I want to use a separate reporting engine for my reports. That is, use APEX to perform the filtering and parameter settings and preview the result in APEX. But the final formatted output will use a more complex layout. Sorry, cannot use BI Publisher or PL/PDF (license issues). Other FOP solution isn't sufficient as well because I'm planning to centralized our reports.
    I already tried using Jasper Reports (also BIRT and Pentaho,they seem identical to me) Web Service but with no luck. I don't want to invest too much time in learning these tools since I don't know if it will ever work with APEX.
    We do have SQL Server 2005 but I'm currently learning its reporting services. I'm a MS Access developer and already have enough of it. Anybody got a suggestion?
    Thanks

    Hi Mertz,
    Well you have to bear in mind that Oracle have made it incredibly simple to integrate APEX with BIP to produce some visually stunning reports that contain data that can be pretty complex.
    However...obviously you need to stump up the money for BIP to get that level of ease/functionality.
    So, what you're really asking is: is there a way I can produce output just as complex as BIP without the price tag of BIP?
    If that's the question the answer is definitely yes, you can use FOP. Anything you can do using BIP (and the BIP Desktop) tool you can do with FOP (or pretty much everything, I haven't found any real big exceptions to the rule).
    However, the 'price' you pay with FOP is that it's another layer that you need to learn about (unlike diving into the BIP desktop plugins to design your form). However you do get complete control over the layout of your exports.
    John.
    http://jes.blogs.shellprompt.net
    http://apex-evangelists.com

  • Report Engine does not increase when there is a large no of reports queue

    Hello Everybody,
    Specifications:
    Product : Oracle Application Server Forms and Reports Services 10.1.2.0.2
    OS : Windows 2003 R2 Server
    Dual Core CPU 2600MHz
    6 GB RAM
    We are doing the sizing for our reports server. We have specified the following in our rep_server.conf
    <engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="2" maxEngine="6" minEngine="2" engLife="50" maxIdle="30" callbackTimeOut="90000" engineResponseTimeOut="3" jvmoptions="-Xms64m -Xmx128m">
    Even when there are 5000 or more reports in the queue still the number of engines in the reports server remains at 2 though I have given that it can use upto a maximum of 6 engines. Can anybody please explain why this happens? Am I missing something here?
    Thank you for your reply in advance.

    Hello,
    Anybody has any idea why the report engine is behaving like this?
    Thanks in advance

  • Webi and Deski report engine ports

    We're having problems connecting to the webi or deski report engines through a firewall with BO XI R2 Java SDK. We've followed this document extensively :
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0047e5f4-3140-2b10-1bae-de175e4c741c
    We've set the -port and -requestport switches but the opendocument call always hangs and eventually gives out the error :
    No server was available to process the request. Please try again later. (Error: RFC 00101)
    Its definitely a firewall issue - I can turn off the firewall to solve it, but obviously that's not a long term solution.
    I believe we have configured the servers correctly according to that document given we managed to successfully connect to the CMS through a firewall following the same procedure.
    If anyone has any experience connecting to the RAS webi / deski servers through a firewall via the Java SDK, please let me know.
    Greg.

    You should only be getting the getRASConnection() method log with Desktop Intelligence, since the internal server name is RAS21.  It's distinct from the public server name RAS (Report Application Server) that's specific to Crystal Reports.  Not trying to harp on this, just an FYI when posting.
    How about the Desktop Intelligence Cache Server?  All communications to the Desktop Intelligence Report Server goes through the Cache Server.  So it's SDK <-> DeskI Cache <-> DeskI Report Server.
    Sincerely, 
    Ted Ueda

  • Embedded report engine is limited to a max of 3 simultaneous user requests

    Please help me.
    I currently developing an ASP.NET web application using Microsoft Visual Studio 2005 with Crystal Reports Embedded.
    But found that this embedded report engine is limited to a maximum of three simultaneous user requests.
    I would like to know, is it any solution for increase the amount of crystal report simultaneous user requests? Can this issues solved if we upgrade to Full Version Crystal Report?
    Please help me. Thank you everyone.

    Hello,
    3 licensing is what stays with the Engine dll and itu2019s applicable to all Crystal bundled products(CR 4 VS2010, CR 4 VS2008, CR 4 VS2005, CR 4 VS2003) and stand alone products(CRXIR2 S6, CR2008 SP3). This cannot be changed/increased until you opt for our server based products, which gives you option for increasing the licenses. You might want to contact CIC (800-677-7271) to get more details on this.
    Until an existing handle on report is released from memory, the other requests cannot be taken up. So, once a report rendering is over you might want to call the ReportDocumentObject.Close(),ReportDocumentObject.Dispose() and force the GC to act. This might release the unused objects from memory and you can reuse them.
    As Don suggested, if you wish, do a search on the forum threads and you will find more details and licensing guides for different products provided earlier.
    As far as my knowledge goes, timeout can also be caused if your app has timeout defined or DB has a timeout setting done. You might want to check that. If you need help on timeout section, I hope you will address it in a new thread. See [rules of engagement.|http://wiki.sdn.sap.com/wiki/x/FgQ]
    Thanks.

Maybe you are looking for

  • Problem in document number auto generation

    Dear All,        I have created a screen in this screen,i want to generate a auto generate number       for that i have write a code but when am executing the program in VS2005,the form was loaded in SAPB1 2005,But am not getting the auto generate nu

  • Using iPhone in Africa

    How can I use my iPhone 5s in Kenya, Tanzania and Ghana. these countries aren't listed in the international data plan

  • EMail received: subscription cancelled - although ...

    Hi all, today, my husband received an eMail stating skype is sorry that he cancelled his subscription and it will be terminated by 13th August (end of current billing period). However neither did he cancel anything himself nor is his credit card or m

  • Basic problem displaying components

    I downloaded Creator today to see if I could make the basic JSF code and then fill in the parts that Creator would not know about. I"ve used similar tools before, like VIsual Basic, as well as the component palette in a Java IDE or two. I'm haivng a

  • How to get list of users with access of MM01 (create & change)

    Hi all, i have to take out list of user having access for MM01 (create material), when i use SUIM to get the list it shows all the list of users including the users with DISPLAY & CHANGE, but i want only those users who had the access of CREATE & CHA