Report-Service is not available: REP-110 und REP-1070
Hello,
I get the following errors after new configuration for Froms, Reports and Discoverer (11.1.1.6):
FRM-41214: Unable to run report
Or:
REP-110: File 01RD_MARG_04E. cannot be opened.
REP-1070: An error occurred while opening or saving a document.
The Report-Server is in Running state, but Report-Service is not available.
How can I isolate the error position?
Thanks in advance,
Mohammad
Just out of curiosity, what did you change in opmn.xml?
Oh, I see in the doc now. That the same thing can be inserted in opmn.xml. But I have never seen
that done in any production environment I have encounterd.
I find that document a little bit strange, to be honest. Is that really the way to configure the Reports Service?
It is so very strange that they do not mention the env-id possibility in the rwserver.conf file.
The REPORTS_PATH is gotten from either registry, that is, the default for the host if you so like, or envid in the call to reports service via the URL as a parameter, ie. &envid=test. That envid can also hold
variables like NLS_LANG and such.
I regard the opmn files as do-not-touch and part of the WLS system structure.
I seldom touch the reports.bat-file. But maybe that was necessary in this case. I do not know.
Edited by: Lars Sjöström on May 31, 2012 5:03 PM
Similar Messages
-
Report error service is not available
Hello,
I find the following error on several locations in my SIPstack logs on my Edge Server:
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
What service is this referring to?
How can we troubleshoot this error message further?
Any additional information about this topic would be appreciated!
/mk
The full INFO message:
L_INFO(TF_PROTOCOL) [0]0A40.1148::03/10/2014-17:14:03.968.000000ad (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 2161867164
Instance-Id: 000000F0
Direction: incoming;source="internal edge";destination="external edge"
Peer: standard.kressmark.com:5061
Message-Type: response
Start-Line: SIP/2.0 503 Service unavailable
From: "Mattias Kressmark"<sip:[email protected]>;tag=45e334cc8d;epid=8ff7cc2b20
To: <sip:[email protected]>;tag=FD66AF22DAE1582D6D94354611261F35
CSeq: 1 SERVICE
Call-ID: 9316261cef2141d3815a94c386e180d6
Via: SIP/2.0/TLS 17.21.122.15:49348;branch=z9hG4bKB54C0D77.B76658C4DF13234B;branched=FALSE;ms-received-port=49348;ms-received-cid=4600
Via: SIP/2.0/TLS 192.168.1.10:51983;received=81.217.34.250;ms-received-port=51983;ms-received-cid=100
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_recordHi,
Did you deploy Monitoring server in your Lync server environment?
Please update to the latest version for Lync server 2010 and then test the issue again.
http://technet.microsoft.com/en-us/lync/dn146015
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?
I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone??? -
Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
RahulHi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners -
Mail service POC - connecting to GMAIL gives error "service is not available"
From webcenter Dev Guide, I followed steps to connect to gmail server using webcenter mail service.
Mail service connection info:
imap server : imap.gmail.com
imap port : 993
smtp server : smtp.gmail.com
smtp port : 465
imap secured : true
smtp secured : true
Test connection status : Success
external application info:
App Name: MyGmailApp
Display Name : My Gmail App
Login URL : https://mail.google.com/mail
Username field : Username
Password field : Password
Authentication Method : POST
Field Names : 'Email Address', 'Reply-To Address'. (Display to user true for both)
Shared credentials & public credentials entered are gmail credentials.
I dropped mail service on to a page & ran the portal.
The error I got was "The service is not available" , Log is given as below. what did i miss ??? Please help me out.
Error Log:
javax.mail.MessagingException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:571)
at javax.mail.Service.connect(Service.java:288)
at javax.mail.Service.connect(Service.java:169)
at oracle.webcenter.collab.mail.MailSession$2.call(MailSession.java:1302)
at oracle.webcenter.collab.mail.MailSession$2.call(MailSession.java:1276)
at oracle.webcenter.concurrent.Submission$2.run(Submission.java:484)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:888)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:682)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1649)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:241)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:235)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1206)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:136)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:893)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:753)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:110)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
at com.sun.mail.iap.ResponseInputStream.readResponse(ResponseInputStream.java:97)
at com.sun.mail.iap.Response.<init>(Response.java:96)
at com.sun.mail.imap.protocol.IMAPResponse.<init>(IMAPResponse.java:61)
at com.sun.mail.imap.protocol.IMAPResponse.readResponse(IMAPResponse.java:135)
at com.sun.mail.imap.protocol.IMAPProtocol.readResponse(IMAPProtocol.java:261)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:114)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:104)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:538)
... 16 more
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:323)
at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:217)
at sun.security.validator.Validator.validate(Validator.java:218)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1185)
... 34 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318)
... 40 more
<Submission> <run> Submission[id=1, service=oracle.webcenter.collab.mail, resource=null] caught exception running task
oracle.webcenter.collab.share.ConnectionFailedException: The service is unavailable.
at oracle.webcenter.collab.mail.MailSession.acquireImapStore(MailSession.java:1374)
at oracle.webcenter.collab.mail.MailSession.login(MailSession.java:462)
at oracle.webcenter.collab.share.Session$1.call(Session.java:652)
at oracle.webcenter.collab.share.Session$1.call(Session.java:646)
at oracle.webcenter.concurrent.Submission$2.run(Submission.java:484)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:888)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:682)
at java.lang.Thread.run(Thread.java:662)Did you add Gmail's certificate to the trust store? Check this link: Configuring SSL
-
Exception in thread "main" bea.jolt.ServiceException: Service is not availa
Hi All,
I'm new to Tuxedo. I've installed tuxedo. I've deployed simpapp given as sample. It's c clients and server are working fine. Now I'm trying to use Java client for the same server. In my office I need to work with Tuxedo9.1 and JOLT. When I'm trying to run I'm getting problem. I'm not able to find any solution. Please help me. I'm giving entire work done by me as follows.
Problem in Running Java Client with Tuxedo.
My ASCII tuxconfig file details:
# (c) 2003 BEA Systems, Inc. All Rights Reserved.
#eident "@(#) samples/atmi/simpapp/ubbsimple $Revision: 1.5 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY 123456
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 50
MAXSERVERS 30
MAXSERVICES 50
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
APPDIR="/shashi/mysimpleapp/simpapp"
TUXCONFIG="/shashi/mysimpleapp/simpapp/tuxconfig"
TUXDIR="/newutitux/newtux/tuxedo9.1"
#Example:
# APPDIR="/home/me/simpapp"
# TUXCONFIG="/home/me/simpapp/tuxconfig"
# TUXDIR="/usr/tuxedo"
systest LMID=simple MAXWSCLIENTS=4
#Example:
#beatux LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE
JSLGROUP LMID=simple GRPNO=2 OPENINFO=NONE
JREPGROUP LMID=simple GRPNO=3 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGROUP SRVID=2
CLOPT=" -- -n //10.10.100.110:5000 -d /dev/tcp "
JREPSVR SRVGRP=JREPGROUP SRVID=4
CLOPT=" -- -W -P /shashi/mysimpleapp/simpapp/jrepository "
JRAD SRVGRP=JSLGROUP SRVID=3
CLOPT=" -- -l //10.10.100.110:5555 -c //10.10.100.110:5000 "
*SERVICES
TOUPPER
I've started the server using command tmboot -y.5 servers are started.
When I test using tmadmin command following is the output.
>psr
Prog Name Queue Name Grp Name ID RqDone Load Done Current Service
BBL 123456 simple 0 0 0 ( IDLE )
simpserv 00001.00001 GROUP1 1 0 0 ( IDLE )
JSL 00002.00002 JSLGROUP 2 0 0 ( IDLE )
JRAD 00002.00003 JSLGROUP 3 0 0 ( IDLE )
JREPSVR 00003.00004 JREPGRO+ 4 0 0 ( IDLE )
pscService Name Routine Name Prog Name Grp Name ID Machine # Done Status
TOUPPER TOUPPER simpserv GROUP1 1 simple 0 AVAIL
My Jrlyconfig file content is:-
LOGDIR=/shashi/mysimpleapp
ACCESS_LOG=access.log
ERROR_LOG=error.log
LISTEN=10.10.100.110:4444
CONNECT=10.10.100.110:5555
SOCKETTIMEOUT=30
and jrly is also running.
Content of jrepository file is:-
#!JOLT1.0^M
add SVC/TOUPPER:vs=1:ex=1:bt=STRING:\^M
bp:pn=STRING:pt=string:pf=167772161:pa=rw:ep:^M
add PKG/SIMPSERV:TOUPPER:^M
ULOG Message is:-
165446.systest!BBL.5691.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit, Patch Level (none)
165446.systest!BBL.5691.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!simpserv.5692.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!simpserv.5692.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!simpserv.5692.1.0: Welcome to the simple server
165446.systest!JSL.5693.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JSL.5693.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JSL.5693.1.0: INFO: JOLT Listener version-BEA Jolt 9.1
165446.systest!JSL.5693.1.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2664953090480>, Expiration Date : <None>"
165446.systest!JSL.5693.1.0: JOLT_CAT:1564: "INFO: Licensee : <Customer>"
165446.systest!JREPSVR.5694.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JREPSVR.5694.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JREPSVR.5694.1.0: Current version: BEA Jolt 9.1
165446.systest!JREPSVR.5694.1.0: Repository "/shashi/mysimpleapp/simpapp/jrepository" (2 records) is writable.
165446.systest!JRAD.5695.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JRAD.5695.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JRAD.5695.1.0: INFO: JRAD version-BEA Jolt 9.1
I don't find any problem in starting and running the system.
Problem faced:-
1.Repository Editor is connected to the system using port number given for jrly( i.e.. 4444) but it is giving an exception
"bea.jolt.ServiceException:Service is not available:.GETKEYS"
2.When trying to load bulk loader after setting jolt.jar and joltadmin.jar to the classpath it is giving the exception
java bea.jolt.admin.jbld //10.10.100.110:4444 services.txt
Exception in thread "main" bea.jolt.ServiceException: Service is not available:.GETKEYS
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at bea.jolt.admin.JSvcPkgTbl.initTable(jbld.java:1010)
at bea.jolt.admin.JSvcPkgTbl.<init>(jbld.java:990)
at bea.jolt.admin.JBldDefRec.<init>(jbld.java:138)
at bea.jolt.admin.jbld.main(jbld.java:801)
Note:- I've tested on port number 5000 and file as jrepository also.The content of services.txt is as follows
service=TOUPPER
export=true
inbuf=STRING
outbuf=STRING
access=inout
3.While running the ToUpper.java given in sample it is giving the exception as follows.
"Exception in thread "main" bea.jolt.ServiceException: Service is not available:TOUPPER
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at ToUpper.main(ToUpper.java:36)"
Content of ToUpper.java:-
/* Copyright 1996 BEA Systems, Inc. All Rights Reserved */
import bea.jolt.*;
public class ToUpper
public static void main (String[] args)
JoltSession session;
JoltSessionAttributes sattr;
JoltRemoteService toupper;
JoltTransaction trans;
String userName=null;
String userPassword=null;
String appPassword=null;
String userRole="myapp";
String outstr;
sattr = new JoltSessionAttributes();
sattr.setString(sattr.APPADDRESS, "//10.10.100.110:4444");
switch (sattr.checkAuthenticationLevel())
case JoltSessionAttributes.NOAUTH:
break;
case JoltSessionAttributes.APPASSWORD:
appPassword = "appPassword";
break;
case JoltSessionAttributes.USRPASSWORD:
userName = "myname";
userPassword = "mysecret";
appPassword = "appPassword";
break;
sattr.setInt(sattr.IDLETIMEOUT, 300);
session = new JoltSession(sattr, null, null,
null, null);
toupper = new JoltRemoteService ("TOUPPER", session);
toupper.setString("STRING", "hello world");
toupper.call(null);
outstr = toupper.getStringDef("STRING", null);
if (outstr != null)
System.out.println(outstr);
session.endSession();
System.exit(0);
} // end main
} // end ToUpper
Please help me. Thanks in Advance. Waiting for ASAP help.
Regards
Shashi RanjanHi,
As per your suggestion I'm again giving the detail of all the files which I'm using.
tmboot -y output:-
Booting all admin and server processes in /home/oracle/simaapp/tuxconfig
INFO: Oracle Tuxedo, Version 11.1.1.1.0, 32-bit, Patch Level (none)
Booting admin processes ...
exec BBL -A :
process id=6116 ... Started.
Booting server processes ...
exec TMUSREVT -- -f /home/oracle/simaapp/tmusrevt.dat :
process id=6117 ... Started.
exec simpserv -A :
process id=6118 ... Started.
exec JSL -- -n //station1.example.com:7000 -d /dev/tcp :
process id=6119 ... Started.
exec JREPSVR -- -W -P /home/oracle/simaapp/jrepository :
process id=6120 ... Started.
exec JRAD -- -l //station1.example.com:5555 -c //station1.example.com:7000 :
process id=6121 ... Started.
6 processes started.
TMUSREVT.ENV content:-
FIELDTBLS=Usysflds; export FIELDTBLS
FLDTBLDIR=$TUXDIR/udataobj; export FLDTBLDIR
FIELDTBLS32=jrep.f32; export FIELDTBLS32;
FLDTBLDIR=$TUXDIR/udataobj; export FLDTBLDIR;
tux.env content:-
TUXDIR=/u01/tuxedo/tuxedo11gR1; export TUXDIR
JAVA_HOME=$TUXDIR/jre; export JAVA_HOME
JVMLIBS=$JAVA_HOME/lib/i386/server:$JAVA_HOME/jre/bin
PATH=$TUXDIR/bin:$JAVA_HOME/bin:$PATH; export PATH
COBCPY=:$TUXDIR/cobinclude; export COBCPY
COBOPT="-C ANS85 -C ALIGN=8 -C NOIBMCOMP -C TRUNC=ANSI -C OSEXT=cbl"; export COBOPT
SHLIB_PATH=$TUXDIR/lib:$JVMLIBS:$SHLIB_PATH; export SHLIB_PATH
LIBPATH=$TUXDIR/lib:$JVMLIBS:$LIBPATH; export LIBPATH
LD_LIBRARY_PATH=$TUXDIR/lib:$JVMLIBS:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
WEBJAVADIR=$TUXDIR/udataobj/webgui/java; export WEBJAVADIR
UBBCONFIG content:-
*RESOURCES
IPCKEY 78111
MASTER "station1"
UID 501
GID 501
PERM 0600
MAXACCESSERS 50
MAXACLGROUPS 16384
MAXGTT 100
DOMAINID "simpapp"
MAXGROUPS 100
MAXNETGROUPS 8
MAXMACHINES 256
MAXQUEUES 50
MAXDRT 0
MAXRFT 0
MAXRTDATA 4
MAXSPDATA 33924
MAXSERVERS 50
MAXSERVICES 100
MAXCONV 10
MODEL SHM
LDBAL Y
1,10 Top
CMTRET COMPLETE
MAXBUFTYPE 16
MAXBUFSTYPE 32
SCANUNIT 10
SANITYSCAN 12
DBBLWAIT 2
BBLQUERY 30
BLOCKTIME 6
NOTIFY DIPIN
SYSTEM_ACCESS FASTPATH
MAXINTERFACES 150
MAXOBJECTS 1000
SIGNATURE_AHEAD 3600
SIGNATURE_BEHIND 604800
USIGNAL SIGUSR2
*MACHINES
DEFAULT:
"station1.example.com" LMID="station1"
TUXCONFIG="/home/oracle/simaapp/tuxconfig"
TUXDIR="/u01/tuxedo/tuxedo11gR1"
APPDIR="/home/oracle/simaapp"
TLOGNAME="TLOG"
TLOGSIZE=100
CMPLIMIT="MAXLONG,MAXLONG"
NETLOAD=0
SPINCOUNT=0
MAXACLCACHE=100
MAXOBJECTS=1000
SICACHEENTRIESMAX="500"
MAXWSCLIENTS=4
*GROUPS
GROUP1
LMID=station1 GRPNO=1 OPENINFO=NONE
JSLGROUP LMID=station1 GRPNO=2 OPENINFO=NONE
JSRGROUP LMID=station1 GRPNO=3 OPENINFO=NONE
TMUGROUP LMID=station1 GRPNO=4 OPENINFO=NONE
TMUSREVTGROUP LMID=station1 GRPNO=5 OPENINFO=NONE
*NETGROUPS
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGROUP SRVID=2
CLOPT=" -- -n //station1.example.com:7000 -d /dev/tcp "
JREPSVR SRVGRP=JSRGROUP SRVID=3
CLOPT=" -- -W -P /home/oracle/simaapp/jrepository "
JRAD SRVGRP=JSLGROUP SRVID=4
CLOPT=" -- -l //station1.example.com:5555 -c //station1.example.com:7000 "
TMUSREVT SRVGRP=TMUSREVTGROUP SRVID=5 GRACE=3600
ENVFILE="/home/oracle/simaapp/TMUSREVT.ENV"
CLOPT=" -- -f /home/oracle/simaapp/tmusrevt.dat "
SEQUENCE=11
*MODULES
*JDBCCONNPOOLS
*SERVICES
TOUPPER
LOAD=50 PRIO=50
BUFTYPE="ALL"
TRANTIME=30
AUTOTRAN=N
AFFINITYSCOPE=SERVER
*INTERFACES
*ROUTING
jrepository content:-
#!JOLT1.0
add SVC/TOUPPER:vs=1:ex=1:bt=STRING:\
bp:pn=STRING:pt=string:pf=167772161:pa=rw:ep:
add PKG/SIMPSERV:TOUPPER:
After exception the content of ULOG:-
175351.station1.example.com!BBL.6116.3086526144.0: 06-13-2010: client high water (0), total client (0)
175351.station1.example.com!BBL.6116.3086526144.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit, Patch Level (none)
175351.station1.example.com!BBL.6116.3086526144.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!TMUSREVT.6117.3086412000.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!TMUSREVT.6117.3086412000.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!simpserv.6118.3086706368.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!simpserv.6118.3086706368.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!simpserv.6118.3086706368.0: Welcome to the simple server
175351.station1.example.com!JSL.6119.3086870208.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JSL.6119.3086870208.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JSL.6119.3086870208.0: INFO: JOLT Listener version-Oracle Jolt 11.1.1.1.0
175351.station1.example.com!JREPSVR.6120.3086403264.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JREPSVR.6120.3086403264.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JREPSVR.6120.3086403264.0: Current version: Oracle Jolt 11.1.1.1.0
175351.station1.example.com!JREPSVR.6120.3086403264.0: Repository "/home/oracle/simaapp/jrepository" (2 records) is writable.
175351.station1.example.com!JRAD.6121.3086603968.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JRAD.6121.3086603968.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JRAD.6121.3086603968.0: INFO: JRAD version-Oracle Jolt 11.1.1.1.0
180656.station1.example.com!JRAD.6121.3086603968.0: JRAD_CAT:1526: INFO: JRLY connection is UP
180656.station1.example.com!JSH.6187.3086858464.-2: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
180656.station1.example.com!JSH.6187.3086858464.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
180656.station1.example.com!JSH.6187.3086858464.-2: INFO: JOLT Handler version-Oracle Jolt 11.1.1.1.0
180657.station1.example.com!JSH.6187.3086858464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'oracle'; client name 'admin'"
Content of stderr:-
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
services.txt content
service=TOUPPER
export=true
inbuf=STRING
outbuf=STRING
access=inout
The content of jrlyconfig file:-
LOGDIR=/home/oracle/simaapp
ACCESS_LOG=access_log
ERROR_LOG=errorlog
LISTEN=station1.example.com:4444
CONNECT=station1.example.com:5555
then I'm running jrly -f jrlyconfig
The exception occurs when I run the command. "java bea.jolt.admin.jbld //station1:4444 services.txt"
Exception in thread "main" bea.jolt.ServiceException: Service is not available:.GETKEYS
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at bea.jolt.admin.JSvcPkgTbl.initTable(jbld.java:1010)
at bea.jolt.admin.JSvcPkgTbl.<init>(jbld.java:990)
at bea.jolt.admin.JBldDefRec.<init>(jbld.java:138)
at bea.jolt.admin.jbld.main(jbld.java:801)
similarly when I'm trying to connect through RE.html
the exception is
bea.jolt.ServiceException: Service is not available:.GETKEYS
The output of command JREPSVR -v is
# List of services and corresponding handler functions built into the server
:ADDREC
:DELREC
:FLUSHCACHE
:GARBAGECOLLECT
.GETALL:GETALL
.GETKEYS:GETKEYS
.GETREC:GETREC
.GETSVC:GETSVC
:LOCKREP
.NUMRECS:NUMRECS
Regards,
Shashi Ranjan -
Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-ChrisHi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
TF400893: Team Foundation Server services are not available.
Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
RegardsHi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
"SQL Server 2008 Reporting Services does not support map report items"
Hi,
I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
"Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
-Also, similar kind of error I am getting for "Indicator" control.Hi Tej,
I think you get this error message when you are deploying a report to report server using BIDS, correct? If not, please provide more details on your scenario :-)
If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server. When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it. Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
BIDS gets the server version from a report project property called TargetServerVersion:
http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services." The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
Hope this helps!
Cheers,
LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights. -
I wanted to suspend my verizon service, but I couldn't. The web shows "the service is not available at this time. Try it later..." How can I address this problem??
Hi Shell126 - We certainly want you to be able to easily manage the account while so far from home! Have you tested a different web browser? Also try clearing the cookie and temporary internet files on your current browser. I am eager to help get this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
The Security Token Service is not available -- SP Server on Windows 7
I just installed SharePoint Server 2010 on a Windows 7 workstation with the aim of setting up a development environment.
Installed all the prerequisites, then SP, everything seemed to go smoothly.
However, the Health Analyzer is warning my that "the Security Token Service is not available". It says that the "Administrator should try to restart the Security Token Service"
I looked under Services for my computer and also looked in IIS, did not see any thing that referenced security tokens. Where would I find the security token service?
Thanks.No.
In Central Admin>Application Management>Manage Service Applications I see the
Security Token Service Application is running. But the health analyzer is still saying that
The Security Token Service is not available.
Any advice on resolving this would be greatly appreciated. -
The Security Token Service is not available error on dedicated Distributed Cache server
I have an error on a dedicated Distributed Cache server stating that the Security Token Service is not available. I was under the impression that when Distributed Cache was running on a dedicated server that the only service that should be enabled
is Distributed Cache.
The token service is working as expected on all other servers but this one. Does this service need to be started or should I just ignore this error message?
Jennifer Knight (MCITP, MCPD)as per my little experience with 2013, if STS is working fine on Web server then I am sure that sharepoint will be fine...Distributed cache stores the ST issued by STS. NO need to worry about this error.
Login
Token Cache
DistributedLogonTokenCache
This
cache stores the security token issued by a Secure Token Service for use by any web server in the server farm. Any web server that receives a request for resources can access the security token from the cache, authenticate the user, and provide access to the
resources requested.
I would say check the ULS logs and get more details about the error why its not working on that server.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
"Media Services Are Not Available"
I'm new...trying to get my photos off of my Blackberry Curve 8520 , and put some music on my Blackberry.
I just installed the Blackberry Desktop Software. On my Blackberry, under Options -> Memory I have Mass Storage Mode Support set to On, and Auto Enable Mass Storage Mode When Connected set to Yes. I apparently have 128.6 MB available which doesn't seem like a lot, but whatever.
In the Blackberry Desktop Software, under Media Sync, the Music, Pictures and Videos tabs all tell me,
"Media Services are not available.
Media Storage is not available.
Please check that a media card is installed correctly in your Blackberry device and that mass storage mode is turned on."
Now, I never put a media card in my device and as far as I can tell there wasn't one in the box, so I'm going to assume I don't have one. Is this normal? Do I really need one in order to transfer files to my PC?Hi
There's no media card in your device.Get one.
If still need to confirm through your device, do the following:
Go to options>memory, There you can check if media card is inserted or not.
One is application memory that you are telling is 128.6 Mb. Below that is Media Card under which you can see the total space and free space. If you are unable to find this media card and details below, then there's no media card inserted for sure.
Regards
Ankush -
XML-RPC Service is not available
I'm experiencing a problem where CF 8.01 will not start. the log shows the message "The XML-RPC service is not available. This exception is usually caused by service startup failure. Check your server configuration."
I traced this to a corrupted /lib/neo-xmlrpc.xml file; the structures being generated when I consume a local web service are malformed. If I reinitialize this file to its form as created when CF is installed, CF will start.
Below is an example of the corrupted structure:
<wddxPacket version='1.0'><header/><data><array length='3'><struct type='coldfusion.server.ConfigMap'><var name='http:// 123.123.123.2<char code='0d'/><char code='0d'/><char code='0a'/> /common/verifyUser.cfc?wsdl'><string>http:// 123.123.123.2<char code='0d'/><char code='0d'/><char code='0a'/> /common/verifyUser.cfc?wsdl</string></var></struct><struct type='coldfusion.server.ConfigMap'><var name='http:// 123.123.123.2<char code='0d'/><char code='0d'/><char code='0a'/> /common/verifyUser.cfc?wsdl'><string></string></var></struct><struct type='coldfusion.server.ConfigMap'><var name='http:// 123.123.123.2<char code='0d'/><char code='0d'/><char code='0a'/> /common/verifyUser.cfc?wsdl'><string></string></var></struct></array></data></wddxPacket>
The corruption is occurring on my developer installation on a windows xp machine. If I execute the same code on my standard server edition running on Windows Server, the structure for the same verifyUser web service looks like this:
<var name='http://123.123.123.1/common/verifyUser.cfc?wsdl'><string></string></var>
On both machines I'm running CF version 8,0,1,195765 with updates chf8010003.jar and hf801-1875.jar.
Has anyone else seen this or have any ideas on how to correct?You're right. Here's what was happening:
My cfinvoke included webservice="http://#APPLICATION.server_ip_address#/common/verifyUser.cfc?wsdl". I was using the same code to extract the IP address, but different operating systems. So when I populated APPLICATION.server_ip_address without trimming, I was getting extraneous trailing garbage on the XP server version.
Thanks. -
The SCOM reporting service is not starting and SCOM RMS is grey.
Hi,
I have performed an activity in my environment related to password change of all SCOM accounts. I referred to the blogs mentioned below :
http://www.systemcentercentral.com/forums-archive/topic/changing-the-scom-adminservice-account-password/
http://support.microsoft.com/kb/936220
What I did to perform the same, I just do as written in the second blog. I started assigning different roles and service to different users, removing SCOM users from those place. Later on,when all the SCOM users are replaced by the new different user, I
changed the password of the SCOM account from AD. Now I tried to repeat the same steps to put back the scom accounts in place as they were earlier. But now, the server is unavailable and grayed out. Reporting service is not getting started.
All the discoveries have stopped working. There is a flood of event ID 1102 in the event viewer.
What should I do to get the services and working of SCOM in place. Please your help.Hi Vinay,
Below is where you need to enter these it is same for SCOM 2007 R2 / 2012 / 2012 R2.
Below are the account mappings:
Data Warehouse Action Account - is for the Data writer account.
(scom_dw)
Data Warehouse Report Deployment Account - is for the Data reader account
(scom_dr)
The one which is blacked out in the screenshot will be the main SCOM Action account. (scom_ac)
On the action account change the Account display name as well. (Display name is it will just show outside where i have blacked out my Action account)
Below are the screenshots as well:
Domain\Username.
Gautam.75801
Maybe you are looking for
-
How can I list path of all muisc NOT stored in iTunes Muisc Folder?
Hi I'm trying to help out a friend (using a Vista PC) with this... Is there a utility which will list the file path of all the music files in the iTunes Library _which are not in_ the iTunes Music Folder? We have discovered that there are many many t
-
I see from a previous post (and notes at http://www.completedigitalphotography.com/?p=550) that the Space key is supposed to put Bridge into full screen mode. What happens on my computer is that Bridge hides the menu bar, but leaves the bridge window
-
IMac won't start up, don't have Install DVD. Is there any hope at all?
Hi Everyone, I have a Non-Intel iMac G5 2.1ghz, it has performed flawlessly until last Thursday when I installed a Security Update (as prompted by OS X) and then rebooted. It loads to the grey screen with the Apple Logo and the spinning wheel. It goe
-
[Solved] pacman -Syyu sync's repository and then repoistory.db
For instance I run 'pacman -Syyu' and it will then sync core, core.db, extra, etra.db and so on a so forth for all the repo's in my pacman.conf. It did not sync the .db on my last install which was up to date unitl I just did a fresh install using th
-
Dear experts Below is my company scenario, We did the GR in reference of PO in Dec. but now we received a Debit note (stated 1 material is free of charge). SAP only allow us to post LIV followed by Debit note. but the problem is that vendor only gave