Report showing list of installed equipment at site

Hi,
I need a report showing
1. List of installed equipment at site.
2. List of installed equipment at based on sales order number.
Please tell me how to find these reports.
Thanks in advance
Anil

run tranz IH08

Similar Messages

Head count report showing list of employees as un assigned 0ORGUNIT

Hi All,
Some of my Head count reports showing a list of employees as not assigned to any organizational unit , but in infocube it is showing org unit .
can any one clarify me onthis .
Thanks in advance.
Babu

I have done investigation all inf cube and master data info objects .
in 0ORGUNIT what i found is
0SOURCESYSTEM
0LOGSYS
both fields are missing .
those two fields effect any data loads.
and one more thing when i reload the data it is showing diffrent amount of employees as un assigned org unit.
Thanks for your prompt responce.

Report showing list of order confirmations and open/close reservations?

Hi
Can we have any standard report having list of order confirmations and open/close reservations in SAP PM ?
Regards
Pooja

Hi Pooja,
Try IW12, Display Document flow, if you are looking for a combined report of Order confirmations and Material status.There are various other reports related to order confirmations and Material status seperately. For material status you can use IWBK.
Better place to post PM questions is in Enterprise Asset management Forum.
Warm regards,
Srinivas Potluri

System Profiler Report Shows PowerPC apps installed - what to do with them?

I just purchased a new iMac and successfully installed brand new shrink wrapped software: Adobe CS3 Design Standard and Microsoft Office:mac 2008. Additionally, I ran Adobe Updater and Microsoft AutoUpdate to ensure I had all of the latest updates - each ran successfully and all applications were successfully updated to the latest versions.
Following the software installation I ran System Profiler to audit all the applications that were installed and I noticed all applications installed with these packages were Universal with the exception of nine applications which are listed as PowerPC apps:
* six apps installed with Adobe Illustrator and
* three apps with Microsoft Office:mac 2008; MSML Server was loaded in two different locations?!
I am concerned that I may have problems if I happen to run any of these PowerPC apps on the Intel iMac or just the fact that they are even present on the computer and may cause problems.
Can someone offer advise if I should delete these PowerPC apps from my new Intel iMac or what I should do with them?
Thanks for your help,
John
Following is a list of the specific PowerPC apps in question that I extracted from the System Profiler Report:
Analyze Documents:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Export Flash Animation:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Microsoft Query:
Version: 10.0.0
Last Modified: 12/3/07 3:00 AM
Kind: PowerPC
Get Info String: 10.0.0 (1204) Copyright 1995-2002 Microsoft Corporation. All rights reserved.
Location: /Applications/Microsoft Office 2008/Office/Microsoft Query
MSMLServer:
Version: 1.0
Last Modified: 11/14/07 3:53 PM
Kind: PowerPC
Get Info String: 1.0, ©1986-2005 Microsoft Corporation
Location: /Applications/Microsoft Office 2008/Office/Microsoft Messaging Library.bundle/Contents/MacOSClassic/MSMLServer
MSMLServer:
Version: 1.0
Last Modified: 11/14/07 3:53 PM
Kind: PowerPC
Get Info String: 1.0, ©1986-2005 Microsoft Corporation
Location: /Applications/Microsoft Office 2008/Office/Microsoft Messaging Library.bundle/MSMLServer

The Adobe items are all AppleScripts which have been compiled as applications. AppleScripts are not compiled as universal apps.
Microsoft Messenger is a universal app. It's possible the server apps are not given they are dated 2005.

Report showing number of articles having negative on hand

Hi,
I have a requirement for a report showing no. of articles in a site that have negative on hands. I tried to develop it by creating a condition to restrict articles that have negative on-hands. I created a calculated key-figure by setting a value 1 and setting exception aggregation to total and reference characteristic as article. But it gives the total no. of articles in that site. It seems the condition is effective only for displaying the negative on-hands but while calculating the no. of articles, it considers everything instead of the condition to give only negative OH articles. Any idea how to achieve this? The report output will be:
Site No. of articles having negative OH
Thanks,

got it working after playing a little bit with calculated key figure.

[Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
                Operation = "ExecQuery";
                ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/

Need report or transaction that shows what pieces of EQUIPMENT for material

Hi,
Please could you tell me a report or transaction that will give me the pieces of EQUIPMENT that materials are tied to in SAP?
Currently in CS15 (where used list) you can only enter one material at a time. I need a report where I can enter many materials and the report shows all of the pieces of equipment that the materials are tied to.
Please suggest,Waiting for reply
Thanks & Regards
Anil

Anil
This is a common request and a quick search of this forum and/or SAPFans using CS15 would have found the answer....
There is nothing standard, however, a common approach is to copy CS15 and add the required functonality.
If you are using ECC6, then it may be possible to use the Enhancement Framework to extend the standard report. Talk to your ABAP team.
PeteA

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line.

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!

See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences

[Forum FAQ] Reporting Service Point cannot be installed on a Site System Server running SQL Server 2012 SP1

Symptom: When you install Reporting Service Point role on a Site System Server running SQL Server
2012 SP1, you may encounter an issue that the Reporting Service Point role cannot be installed. The error log “srsrpMSI.log” and “srsrpsetup.log” may throw the error as shown in Figure 1 and Figure 2.
03:32:03:764]:
MainEngineThread is returning 1618
Figure 1: Error -1
<03/03/14 03:32:03>
srsrp.msi exited with return code: 1618
Figure 2: Error -2
Reason: All the two logs indicate an error return code 1618. From the KB below you may know what
the return code means.
ERROR_INSTALL_ALREADY RUNNING
1618
Another installation is already in progress. Complete that installation before proceeding with this install.
KB link:
http://support.microsoft.com/kb/290158 “it is related to an Office Suite KB, anyway, the MSI return code is the same meaning”
You can look into Resource Manager and Event Viewer to find the other currently running MSI installation. You may get a warning in Event Log that means the MSI wants to install a SQL Server
related Component (Figure 3). The Resource Manager confirms this (Figure 4).
Event Log:
Event ID: 1004
Source: Msinstaller
Level: Warning
Detection of product '{A7037EB2-F953-4B12-B843-195F4D988DA1}',
feature 'SQL_Tools_ANS', component '{0CECE655-2A0F-4593-AF4B-EFC31D622982}' failed. The resource '' does not exist.
Figure 3: Event Log
Figure 4: Resource Manager
Resolution: the error is exactly what the following KB describes.
KB Link:
http://support.microsoft.com/kb/2793634
After we resolve the SQL Server 2012 issue, the Reporting Service Role is installed successfully.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Trying to download the latest update for Epson printer/scanner but although it starts (up to about 5KB) it stops without completing. The download list shows it is installed ( 8 times!) but there is nothing in Finder downloads

Trying to download the latest update for Epson printer/scanner but although it starts (up to about 5KB of 26.8MB) it stops without completing. The download list shows it is installed ( 8 times!) but there is nothing in Finder downloads. What can I do to download this update

Try re-indexing Spotlight.
Spotlight – Re-index
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Applications/Image Capture or VueScan work?
VueScan
VueScan FAQ

How to show content of a list which resides in other site collection in Office 365?

Hi All,
Can anyone help on How to show content of a list which resides in other site collection in Office 365 . Using Rest and Soap services this is not possible as we have limitations in office 365.So if anyone have any idea please let me know.
Note : We are not allowed to use CSOM for this requirement.
Many Thanks,
Vinod.

Hi Vinod,
You can use cross site publishing feature of SharePoint 2013.
http://blogs.msdn.com/b/justinvoels/archive/2012/09/24/sharepoint-2013-search-driven-publishing-and-cross_2d00_site-collection-publishing-overview.aspx
https://technet.microsoft.com/en-us/library/jj635883.aspx
Alternative to cross-site publishing in SP Online
https://www.youtube.com/watch?v=chwHhEmIERg
Best Regards,
Brij K
http://bloggerbrij.blogspot.co.uk/

Rebate report or list which shows the balance of each rebate in the list

Hi,
VB(8 list rebates; this report lists the rebates in the selected range and you can drill in...Even after drill in this list does not include settlements or manual accruals and so does not reprent the balance? Any thoughts or experience with this issue?
a further question;
when you have several hundred, is there a report or list that shows the open balance of each rebate with out drilling into each rebate number?
thanks
Craig

Hi,
Have you tried the following :-
Compare Rebate Basis: Billing Documents Versus Statistics
Title
Comparison of the Rebate Basis and Accrual Corrections
Purpose
The report RV15B002 gives you the option of comparing statistics from the rebate settlements with the values from the billing documents. These values can differ if you start rebate processing later and want to take into account old billing documents. The report also allows you to post a rebate correction agreement, which corrects accruals.
Regards,
Amrish Purohit

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

To show report which list all Accounts with no activity associated with it

Hi
1) Is it possible to show report which list all the accounts which do not have any activity associated with it?
2) A report which shows All the accounts with Activity ( Even though there is no activity associated with it)
Quick reply appreciated

Hi Rits,
You can achieve this using combine analysis. Create two reports and in the first one make the Activity Id blank, In the second report keep it as it is and do union of both the analysis.
This will give you all the accounts which have/have not Activities associated with them.
Hope it helps,
Thanks,
Mayank

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Report showing list of installed equipment at site

Similar Messages

Maybe you are looking for