Report SLIN Error need to be removed
Hi All,
I am getting the below SLIN error while doing extended program check.
How to rectify this error.
Use addition UNIT when outputting IT_TAB-MENGE
Use auxiliary field when outputting with MESSAGE
Regards,
Viji.
Hi,
Try using IT_TAB-MENGE UNIT 'USD'.
Regards,
Arati.
Similar Messages
-
Report Server Error (NEED URGENT HELP!!)
Dear Supporting Team & All Oracle Members,
I was unable to run my report smoothly just
recently. The error messages were as follows:
"rwcgi60.exe - Application Error"
"The instruction at "0x77f6754b" referenced
memory of "0x016dle18". The memory could
not be "read". Click on OK to terminate
the application".
For your info, development was by using
Javascript with Netscape 4.7 as my default
browser. Is there anything wrong with my
setting? Before this, I've been using the
same server for the past three (3) months
but nothing happen. Kindly provide some
solutions to this problem.
Thanks in advance.
nullDear Supporting Team & All Oracle Members,
I was unable to run my report smoothly just
recently. The error messages were as follows:
"rwcgi60.exe - Application Error"
"The instruction at "0x77f6754b" referenced
memory of "0x016dle18". The memory could
not be "read". Click on OK to terminate
the application".
For your info, development was by using
Javascript with Netscape 4.7 as my default
browser. Is there anything wrong with my
setting? Before this, I've been using the
same server for the past three (3) months
but nothing happen. Kindly provide some
solutions to this problem.
Thanks in advance.
null -
after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi 55 KBHi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi 22 KB -
Hi All,
I am getting the following SLIN error for my report.
Code Snippet.:
LOOP AT i_ekes INTO wa_ekes WHERE ebeln = wa_po-ebeln
AND ebelp = wa_po-ebelp.
AT END OF ebelp.
V_CARRY_501 = c_x.
ENDAT.
SLIN Error:
The LOOP statement processing will be limited
(FROM, TO and WHERE additions in LOOP)
Interaction with group change processing (AT NEW, ...) is undefined
Points Assured,
Regards,
Viji.Hi,
As per SAP documentation u should not use AT events with where clause. SAP will not give guarenty on the functionality.
Replace the logic like below.
SORT i_ekes BY ebelp.
LOOP AT i_ekes INTO wa_ekes.
CHECK wa_ekes-ebeln = wa_po-ebeln
AND wa_ekes-ebelp = wa_po-ebelp.
AT END OF ebelp.
V_CARRY_501 = c_x.
ENDAT.
ENDLOOP.
Also at what position is the field EBELP?
If it is not the first field then till that field it takes the key.
eg: EBELP is 3rd field in ur itab then when ever field1 or 2 or 3(EBELP) changes then control enters to AT event.
Another way could be like this.
i_ekes_temp [] = i_ekes[].
DELETE i_ekes_temp WHERE wa_ekes-ebeln NE wa_po-
ebeln AND wa_ekes-ebelp NE wa_po-ebelp.
SORT i_ekes_temp BY ebelp.
LOOP AT i_ekes_temp INTO wa_ekes.
AT END OF ebelp.
V_CARRY_501 = c_x.
ENDAT.
ENDLOOP.
I feel first approach is better.
Hope it is clear.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Aug 26, 2008 6:17 PM -
U2022 u201CInvoice Dateu201D need to be removed from ageing reports
Anybody please help me in the following: u201CInvoice Dateu201D need to be removed
>
Sathya priya wrote:
> Anybody please help me in the following: u201CInvoice Dateu201D need to be removed
Standard reports?or customized? -
Epson 1670 Perfection Photo Scanner gives "Scanner reported an error" in Image Capture
I can not get my scanner to work. It gives a generic "Scanner reported an error. An error occurred during scanning" message anytime I try to scan something. I have tried downloading the drivers from Epson and get the same result. I am using a 2011 MacBook Pro 15" with Snow Leopard 10.6.7. Any help would be appreciated.
For anyone else with this problem (for those who WANT to use Image Capture from Preview)
The EPSON ICA drive needs to be deleted.
The ICA driver can be removed by following steps:
1. Disconnect the scanner
2. Open following path in Finder
/Library/Image Capture/Devices/from there (called Epson Scanner.app)
3. Delete this file.
4. Plug in your scanner.
5. Try to scan an image. (after this step it worked for me)
Others have had to:
3. Delete this file
4. Reinstall the old ICA driver for the Epson scanner.
5. Plug in your scanner.
6. Try to scan an image.
And still others have had to:
3. Delete this file
4. Reinstall the new ICA driver (listed above) for the Epson scanner.
5. Plug in your scanner.
6. Try to scan an image.
Sorry all. It has been a long day of troubleshooting and trying different things out.
Good luck. Drop me a line if you want to compare notes.
-jojo -
Hi All,
When I am refreshing Webi report, getting error:
Invalid Prompt definition. See your Business Objects administrator. (Error: WIS 00005)
Please help.
Regards,Hi,
Please search the Knowledge Base for Articles before posting. www.service.sap.com/xsearch
You need to look at :
Note 1404402 - Expanding an WebI LOV prompt, using SAP BW Hierarchy node, fails with errors. (FixPack2.5)
Note 1569069 - Invalid prompt definition
Regards,
H -
5200: FR Essbase Report - POV Error
Hi All,
One of our user (non-admin) is getting the below POV error when he tried to run a FR Essbase report,
"5200:Error executing query :;has Pov Dims=0;pov XML=<?xml version ="1.0"?><datasources></datasources>"
we tried the following actions as a part of trouble shooting, but nothing worked so far,
- Verified the File --> Preferences in workspace and the POV settings is ON
- Reset the user POV using ManageUserPOV.cmd
- Deprovisioned & reprovisioned the user
- Verified the user security access
- we are able to run the report with other admin & non-admin logins
Kindly suggest us with a solution, if you have faced this error in your past.
Thanks,
SivaTry to reset his POV using the HYPERION_HOME\BIPlus\bin\ManageUserPOV.cmd utility.
You need to alter the ManageUserPOV.properties file to indicate his/her user ID
JTS -
Crystal Report Viewer error out when running multiple instances
Hi,
I am using java 1.4 with BO XI R3.0.
I notice I can only run one report at a time. If I was to run two reports, the 1st report will error out while 2nd report will run to its completion. Reports run on separate popup windows. I have tested with IE6, IE8 and also FireFox 3.0
Depending on the timing, I get different kinds of error.
"A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server. [RCIRAS9190] [RASLIB9002] "
"The Report Processing Server session you are using to connect is in the process of being shut down. You need to retry. [RCIRAS0200]"
I am using PSReportFactory and set parameters into CrystalReportViewer to display.
processParametersu2026
CrystalReportViewer viewer = new CrystalReportViewer();
pfieldDV = new ParameterFieldDiscreteValue();
pfieldDV.setValue(formatViewerParameterInputValue(tempRpt[1],tempParam[x]));
pfield.getCurrentValues().add(pfieldDV);
viewerParameters.add(pfield);
viewer.setParameterFields(viewerParameters);
createCrystalViewer(m_oReportWrap.getRequest(), response, sInstanceId,viewer);
private void createCrystalViewer(HttpServletRequest request, HttpServletResponse response2, String sInstanceId, CrystalReportViewer viewer) throws ReportSDKExceptionBase, FileNotFoundException, IOException, SDKException
IEnterpriseSession eSession = oLogon.getCESession();
IInfoStore iStore = oLogon.getInfostore();
IInfoObject rptObject = findInfoObject(iStore,sInstanceId);
IReportSourceFactory rptFactory = IReportSourceFactory)eSession.getService("","PSReportFactory");
IReportSource reportSource = rptFactory.openReportSource(rptObject,Locale.ENGLISH);
IReport report = (IReport)rptObject;
ConnectionInfo conn = new ConnectionInfo();
ConnectionInfos connInfo = new ConnectionInfos();
ServletContext sc = getServletConfig().getServletContext();
String realPath = sc.getRealPath("");
Properties prop = new Properties();
viewer.setOwnPage(true);
viewer.setDatabaseLogonInfos(connInfo);
viewer.setReportSource(reportSource);
viewer.setURI(request.getRequestURI() + "?reportID=" + rptObject.getID() + &viewerType=vwrTypeJavaSDK&viewID=1");
viewer.setEnterpriseLogon(eSession);
viewer.setHyperLink("New Window");
viewer.processHttpRequest(request, response2, sc, null);Thanks to both of you.
I actually was able to resolved this issue by tracking the values inside IEnterpriseSession.
// Perform Crystal Enterprise Logon
ISessionMgr oSessionMgr = CrystalEnterprise.getSessionMgr();
IEnterpriseSession m_oCESession = oSessionMgr.logon(sUserid, sPassword, sSystemName, getSecTypeString(iSecType));
System.out.println("in logon m_oCESession "+m_oCESession);
The UserInfo in the SeucuritySession: userInfo was always null so whatever i pass in, it was not storing them.
(EnterpriseSession:logon=(SecuritySession:userInfo=null)
All i need to do is to add IUserInfo userInfo = null; before IEnterpriseSession then it will store the user & password. -
HP Scan (Officejet Pro 8600) reports an error
I'm having several problems with scanning. I am using HP Scan Version 4.4.1 (21) on a MacBook Pro running Mavericks - 10.9.1. This is installed as part of the v12.34.37 Mac OS Driver/Application Suite for Mavericks.
1. Scanner reported an error (An error occurred during scanning.)
This occurs having selected 'Scan' from the HP Scan Menu, I then select Type, but only have the 'Automatic' option available to me.
2. I no longer have access to change settings on the Scanner Presets Menu. I can't select any of the options (Source, Orientation, Mode, Resolution, Crop to) and I also seem to have lost the 'manual' double-sided option (which alongside the lack of twain driver was a shocking omission from this model, and an enormous dissappointment).
See the image below: -
3. Scan to computer (scanning to PDF or JPG)
Having selected a computer from the list, the scanner is unsuccessful. The error message is: -
Scan Unsuccessful
The HP Scan dialogue briefly appears on screen and displays the message 'Preparing to Scan'.
The scan could not be completed due to one or more of the following issues:
- Connection to the computer is lost
- The scan application on the computer is currently in use
- OCR application is not installed on the computer
See the computer monitor for details (there is no information on screen).
I can scan from the webscan applicaiton, and eprint is configured correctly if that has any bearing on the response!
I hope that this is enough information to get the problem diagnosed/solved, but if not, please let me know what else you need!
Thanks!!Hi,
I've got around to runing the tests you recommended.
The power cycle did not work.
I then ran the troubleshooting from the recommended link for Mavericks which is what I am running.
Solution one: There are no other users using the scanner, just one connection from my computer.
Solution two: Scan to computer checked, and printer sharing switched on. Still no scan.
Solution three: Repair Disk. This resulted in the following: -
2014-03-02 15:41:07 +0000: Disk Utility started.
2014-03-02 15:44:11 +0000: Repairing permissions for “Macintosh HD”
2014-03-02 15:44:20 +0000: Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.
2014-03-02 15:44:20 +0000: Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .
2014-03-02 15:44:20 +0000: Repaired “Library/Printers/InstalledPrinters.plist”
2014-03-02 15:45:51 +0000:
2014-03-02 15:45:51 +0000: Permissions repair complete
2014-03-02 15:45:51 +0000:
2014-03-02 15:45:51 +0000:
This did not solve the problem.
Solution four: Uninstall and reinstall the software. The scan to computer feature is still not working.
I am still without a working scanning feature. I may look at returning the printer and exchanging it for a different make or model - this is harder than it should be. -
Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens. -
how to hide the slin errors
Hi Shilpa.
I would like to suggest my opinion,
Refered from,
[SAP HELP Library - Standard Reference for Errors and Warnings|http://help.sap.com/saphelp_nw04s/helpdata/en/43/00c5b7daf15166e10000000a1553f6/content.htm]
SLIN Infos point to possible (semantic) program errors. According to the situation, the program should be changed or the messages should be switched off.+
+Only the SLIN messages of this category can be switched off by means of special comments
Reference,
Use u201C#EC * to hide warnings from places that cannot be removed by proper typing.
[SDN Library - Standard Reference - PDF - Make ABAP code unicode enabled - Hide SLIN Error Messages|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c031aa90-0201-0010-b69d-88a278e158c8]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
have added name to Sql server , users cannot access the report, getting error message ,
I have give all the permission to this users, so why this users still cannot look at the report,
and getting error message,
An error has occurred during report processing.
cannot create a connection to data source Ax live
for more information about this error navigate to the report server on the local server machine or enable remote errors.
can some please help me what this message means,
I really appreciate it
thanks In advanceIf "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question. -
Full Error is: "Failed to get members of collection '{Collection Name from "Initialize Data"}'.". The SMS Provider reported an error. Details: Generic failure
Orchestrator 2012 R2 7.2.84.0
Using Integration Pack 7.2 for System Center 2012 Configuration Manager
I have a Runbook that is setup to use Get Collection Members from SCCM. The fields are:
Collection: {Collection Name from "Initialize Data"}
Collection Value Type: Name
When I use the Runbook Tester (or when I try to run it myself) I get the error:
"Failed to get members of collection '{Collection Name from "Initialize Data"}'.". The SMS Provider reported an error. Details: Generic failure
I have tried using the Collection ID and I get the same error. From the Collection Property in Get Collection Members I can browse and see all the collections in SCCM, so I know the connection is working.
An example of a collection I am trying to use is this: SUM - Patch and Reboot Server - 3rd Sat 1AM . I have tried using it with quotes and single quotes as well and I get the same error.
The log file for SCCM looks like this when it fails:
CSspQueryForObject :: Execute...~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
~*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(1782) : Failed to parse WQL string SELECT * FROM SMS_Collection WHERE Name = "{Collection Name from "Initialize Data"}"~*~*~ $$<SMS Provider><03-25-2014
11:34:52.904+300><thread=528 (0x210)>
~*~*~Failed to parse WQL string SELECT * FROM SMS_Collection WHERE Name = "{Collection Name from "Initialize Data"}" ~*~*~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
Execute WQL =SELECT * FROM SMS_Collection WHERE Name = "{Collection Name from "Initialize Data"}"~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
Execute SQL =~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
Removing Handle 1792008112 from async call map~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
ExecQueryAsync: COMPLETE SELECT * FROM SMS_Collection WHERE Name = "{Collection Name from "Initialize Data"}"~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1862502880~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
My SCCM Administrator and I are out of ideas about what else to try. Anyone have some ideas on what might be causing the issue?
MCITP | VCP4 | VCP5Hi,
may I ask if you modified the log? Because of ...
Execute WQL =SELECT * FROM SMS_Collection WHERE Name = "{Collection Name from "Initialize Data"}"~ $$<SMS Provider><03-25-2014 11:34:52.904+300><thread=528 (0x210)>
Have you typed or subscribe the Published Data to the Field Collection in the Activity "Get Collection Member"?
It must be subscribed!: Click with right mouse key-> Subscribe->Published Data
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Time machine reporting space error
My TM backups are coming back with an error saying that my backup is XX.X and I only have XX.X space on my external drive. The confounding thing is that the external HDD has more than double the space that the backup needs. I have attached a couple of screen shots with the error. I have done a surface scan with Drive Genius 3 to make sure that a bad block wasn't the cause.
Any ideas?Time Machine works on a recursive algorithm to try and maximize the archival capability of its backups. If it can't maximize it, it will report an error. Generally speaking your backup drive needs to be at least twice the size of the original. Because the algorithm itself gives you no control over when it considers an archive too old to preserve, I recommend making manual Time Machine backups instead of automatic by controlling it with Time Machine switch in Apple menu -> System Preferences -> Time Machine. When off, go ahead and backup the archives that are most important to you, somewhere other than the Time Machine drive. Otherwise if the original drive does not retain the data, it will eventually vanish.
Maybe you are looking for
-
Should I buy a 32GB or 64GB iPad 4? I will use it mainly to store photos, surf web, email.
I have two Nikon cameras, a D3X and a D600 and use Lightroom 4 to process my photos on my MacBook Pro. I want to use the iPad to show my portfolios to others as well as to enjoy looking at what I think are my best photos. I currently have 40K+photo
-
Can i create a template in pages with IOS?
How do I create a template in Pages from my iPhone 6? Thank you.
-
Post Author: amr_foci CA Forum: Xcelsius and Live Office could i use the live office connecter outside my LAN? and if yes,, wat configuration sould be done to be able to connect to my reports over the WWW from the live office thank you
-
OIA 11.1.1.5 - OIM 11.1.1.5 Integration Cannot see the Provisioning Server
Hi Everyone, I'm trying to integrate OIM and OIA, I followed the steps that appear on http://docs.oracle.com/cd/E24179_01/doc.1111/e23377/integratingwithoimpreferred.htm#BABBEBFC but when I need to create the provisioning server I don't see the oracl
-
Problème lancement "gérer les sites"
Bonjour a tous, J'ai un "petit" problème avec Dreamweaver et je me permets de vous le soumettre, je viens de le télécharger, sur le site officiel, la version d'essai proposée et après une installation tout à fait normal, un lancement de programme tou