Report standard from FBL3N and VF03
Dear Experts,
Is there any SAP standard report if we need data which taken from VF03 (billing no, billing date, batch no, material number , material description), quantity) combined with data from FBL3N (amount in local, amount in document currency, posting date, profit center) ?
Kindly advice.
Thank you
Hi ,
As fas as I know, there is no such standard report in SAP.
- Better you can use the fields and generate the customized report using "Report Painter", or
- Give the relevant fields in the form of a Functional specification for the ABAP team to develop.
Regards'
Srini
Similar Messages
-
Reports Executed from SA38 and user name
Hi,
I wanted to find the reports executed from sA38 and the user name who did it
We are able to get the information from STAD, but we are able to get only one day's data
Please let me know if there is any table , where i can get the information of all the list of Reports and users executed from SA38
Thanks in AdvanceHello Balaji
you need to turn on audit log ...through sm19 you can to that,not only the user but report name
which is executed is also available when you turn on the audit (sm19),after that you can check
the daily audits by tcode sm20.so browse for it...you may get more information.
regards,
Manjula. -
Empty report returned from WEBI and Crystal report when using external hier
Hi,
WEBI and Crystal report build from BEX query returned empty report when we used external hierarchy 0PROFIT_CTR. In BEX we don't have any problems with it.
No authority check is perfomed on the hierarchy when we start the report in WEBI/Crystal. Only check on the hierarchy is performed when the root authorization is assigned to the userWe using BO4 SP12
-
Same gl balance from fbl3n and f.01 doesn't tally
Hi all
In our financial report same GL displays different figure when used in fbl3n and f.01
please reply
ThanksHi
If you are in ECC 6 and New GL Implemented check with F.01 with FAGLL03 T code.
Rgds
Vani -
Report call from forms and 1017
Hi,
we have a web application and and it's first screen is the login screen where user can change their password or when grace time comes we force the user to change their password etc. Password changes successfully, no issue and user goes inside the application. But here is the problem. When user clicks the report after chagning the password then report doesn't work, can't connect to database and audit trail shows 1017 so obviously when they click 3 times their account gets locked because in profile it's set to 3 failed attempts. When user close the application and re login again and then click the report, it works fine. I'm suspecting the new changed password doesn't pass to the report? i would really appreciate for your help, suggestions, advise. how do i make sure that the new changed password should be passed to the report?. We're running against 11g database and sec_case_sensitive_logon is set to false.
Thanks
RMThank you for replying.
Forms and Report Version:
Forms [32 Bit] Version 10.1.2.3.0 (Production)
Report Builder 10.1.2.3.0
ORACLE Server Release 10.1.0.5.0
We have a common procedure in the forms Obj Libarary which is called from WHEN-BUTTON-PRESSED trigger.
Here is the common procedure:
PROCEDURE EP_RUN_REPORT
( as_in_rep_name IN VARCHAR2,
as_in_plist IN PARAMLIST,
ab_in_printer IN VARCHAR2 DEFAULT NULL
IS
ls_rep_id REPORT_OBJECT;
ls_job_id VARCHAR2(300);
ls_status VARCHAR2(20);
ls_url VARCHAR2(120);
ls_rep_server VARCHAR2(100);
BEGIN
TOOL_ENV.GETVAR( 'REP_SERVER' ,ls_rep_server );
IF ls_rep_server IS NULL THEN
pkg_alert.ep_alert('E','ERROR GETTING ENVIRONMENT VARIABLE');
RAISE FORM_TRIGGER_FAILURE;
END IF;
ls_rep_id := FIND_REPORT_OBJECT (as_in_rep_name);
IF ab_in_printer IS NULL THEN
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_DESTYPE, CACHE );
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_DESFORMAT, 'PDF');
ELSE
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_DESTYPE, PRINTER );
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_DESNAME, ab_in_printer);
END IF;
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_SERVER, ls_rep_server );
SET_REPORT_OBJECT_PROPERTY(ls_rep_id, REPORT_OTHER, 'PARAMFORM=NO');
ls_job_id := RUN_REPORT_OBJECT (ls_rep_id, as_in_plist);
ls_status := REPORT_OBJECT_STATUS(ls_job_id);
WHILE ls_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
ls_status := REPORT_OBJECT_STATUS (ls_job_id);
END LOOP;
IF ls_status = 'FINISHED' THEN
IF ab_in_printer IS NULL THEN
TOOL_ENV.GETVAR('URL',ls_url);
IF ls_url IS NULL THEN
pkg_alert.ep_alert('E','ERROR GETTING ENVIRONMENT VARIABLE');
RAISE FORM_TRIGGER_FAILURE;
END IF;
WEB.SHOW_DOCUMENT( ls_url ||
'reports/rwservlet/getjobid'||
SUBSTR(ls_job_id, INSTR(ls_job_id,'_',-1)+1)||
'?'||'server='||ls_rep_server,
'_blank');
ELSE
NULL;
END IF;
ELSE
pkg_alert.ep_alert('E','ERROR WHILE GENERATING REPORT');
RAISE FORM_TRIGGER_FAILURE;
END IF;
END;Is there any other option beside giving the message?
thanks again.
RM -
ITS Reports called from Launchpad and LPA Reporting iView
Hi..
We have developed custom reports that launch from the reporting launchpad. When selected, the LPA reporting application provides a list of employees. After selecting an employee, the report fails to launch with selected employee. The report input screen is displayed in ITS. Are there any configuration that maps the LPA employee selection field to the receiving ITS report?
Standard reports work fine.what error you get?
check here
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc -
Combined report from FS10N and COMAC
Dear experts,
I would like to combine some fields in report, taken from FS10N and COMAC. The report is to display production order with account balance amount with status work in progress (gl account xxx). Beside query, is there any standard report to display data combined from transaction codes above?
Thank you in advance.Pranav,
you entered in FS10N and hit twice to get details, then you are in line item report from FS10n similar to FBL3n. In this report you display only what you have in line item screen. You don't have Cost Object in this instance since this line item is balance sheet account.
You have to develop a report which fetches from PO tables
Check below transaction and enter you document number in dynamic selection:
S_ALR_8701228
Here you can see differences among line items and cost assignment. -
GL report including incoming check account (FBL3N and FBL5N) SAP E1P
Hi experts, I have a minor problem concerning some reports we are running daily in our business.
Today we run few GL -account reports using transaction FBL3N and then we have to run FBL5N
in customer level to get information from our incoming check account... (FBL3N does not accept
that account in line level)
Now we have a need to get these reports in to a one report... Using SE16 is out of the question because
our company security reasons
SO, does anyone know any kind of solution to get all general ledger account transactions from a certain day
to one report?
We are using SAP R/3 E1P...Hi ,
You can write an ABAP Query T-code SQVI. and generate the reoprt as desired.
regards,
Shayam -
Oracle Assets Category-wise Report from FA and GL tables
Hi,
I am developing a customized report (Schedule of Fixed Assets) in the Oracle Assets Module, Which includes Category Wise Opening Balance, additions, adjustments, transfer IN, Transfer OUT and Retirements of Cost and Depreciations. I am using FA tables (FA_CATEGORY_BOOKS, FA_CATEGORIES_B) for category_id, category_name (segment1 of category combination) and book_type_code (Book Name). And I am also using GL tables (GL_BALANCES, GL_JE_HEADERS, GL_JE_LINES) for the amount of begin_balance_dr,begin_balance_cr,accounted_dr and accounted_cr.
The report gets the category_id,category_name from FA_CATEGORIES_B and book_type_code, asset_account_ccid, reserve_account_ccid and book_type_code from FA_CATEGORY_BOOKS for a single book. The sum of accounted_dr or sum of accounted_cr is calculated for a single category_id whose asset_account_ccid is matched with code_combination_id of GL_JE_LINES.
There are 15 books each have many projects (FA_CATEGORIE_B.segment6). This report is working as desired for 14 books but in one book there is same asset_account_ccid and reserve_account_ccid for more than one category_id(s). That’s why the same amount is displayed against the multiple category_ids .
As functionally it is possible in Oracle Assets to have same asset_account_ccid or reserve_account_ccid for more than one category_ids, I want to know that is there any other attribute(except asset_account_ccid,reserve_account_ccid and code_combination_id) which can be used to get the separate data for each category_id from GL tables.
Regards,
Fahim
[email protected]hi vijay,
thanks for your quick reply,
i'm preparing a reports,fields from bsis and bseg database tables,
and,my select statement giving error,saying that cluster table can't be joined,
my problem is,how to write the select statement without inner join those tables,is there any alternative,
i heard there is 'select for all entries',but i don't know proper usage of that addition,
regards,
kc -
Difference in GL Balances between two Standard Report fbl3n and fagll03
Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK Description Amount
86 GR/IR 1000.00
31 Vendor -800.00
50 TDS -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK Description Amount
21 Vendor 800.00
40 TDS 200.00
96 GR/IR -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No. PK Ammount
Entry 1 50 -200.00
Entry 2 40 -200.00 -
> ?????
*OPEN ITEMS - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No. PK Ammount
Entry 1 50 -200.00
Entry 2 40 +200.00
*OPEN ITEMS 0.00
PLEASE HELP
Regards
Soumitra BhattacharyaHi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram -
Report to display total and detail from table GLT0 and FBL3N
hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls adviceuse report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas -
Footer in FBL3N and FS10N reports
Hi there. Is there a possibility to add a footer to reports printed from mentioned transactions? Greetings. P.
Hi
You can not modify the footer for FBL3N or FS10N report as they are standard SAP reports and don't provide any flexibility for making changes to header/ footer.
I would agree with Ajay above to make a custom report if the requirement is to add the header or footer at any cost. It is not recommended to modify standard SAP objects without consulting with SAP. If you do so and you face a problem later on, then SAP will not provide you any support for the objects to which you made a modification to.
regards -
How to get Long text in report from FBL3N
Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji -
Line item missing from FBL3N report
Line item is missing from FBL3N report. I am selecting correct parameters for FBL3N report.
The correct balance is shown in the FS10N report.
I have checked the document, it is not reversed.
Can anyone please tell me the reason for the same?HI ,
If its related to 2009 and are you sure that you have selected fiscal year or date in which that document falls .
Can you Do one thing Please go to Dynamic selection of FBL3N and put that document number in Document number field and then find out whether that documents come or not .
if it does then please look at posting date and GL accounts etc for that and check the header data as well.
May document is related to different company code .
One more thing Please check when you run FS10N display line item can you see document there if you can then definatley you will be able to see .
Please attached the screen shot of document with header data .
Many Thanks
Regards. -
Report on standard ODS object and transactional ODS object
hi gurus
i have an infoset which is built on two transactional ODS objects and one standard ODS object which gets the data on regulr schedule. the transactional ODS obejcts get the user entered data.
when i query on the infoset, i am getting the data. and when i query on the standard ODS object i am getting the data. but when i am trying to create a query on the combination of the Infoset and the ODS object i am not getting the data.
is there any way to generate report on the standard ods object and Infoset from transactional ods objects.
your help will be greatly appreciated.
thanks in advance
vijaykumarHello ViJaY,
how r u ?
Try creating a MultiProvider with the Standard ODS and InfoSet.
Best Regards....
Sankar Kumar
Maybe you are looking for
-
Downloading a file from Database [Blob field]
I am trying to write an application which can upload and download files [Excel, Word etc.] to/from an Oracle 9i database Blob field. I am using Java/JSP for the same. The upload part works just fine. However, when I try to download the file that I up
-
Toshiba DT01ACA050 too many bad sectors on first 5 months
Hi Good day, I bought a toshiba internal drive 500gb(sealed) from my friend but after weird behavior on my pc I found out that it has too many bad sectors detected by HD tune pro and HDsentinel. He insisted that the drive is in good condition because
-
Can I get back the color control bar?
After a 5 hour download and install, the most noticeable change is that Apple changed the left-hand side control bar from colored to all gray. Frankly, I've been very disappointed with Apple's design changes lately, and this one is another example,
-
Moved from PC to Mac: Should I Reformat my iPod?
BEFORE: I used to use a PC all the time, never a Mac. Therefore my iPod is formatted for PC. NOW: I use a Mac 99% of the time. Maybe (very ocasionally) a PC. QUESTION: Is it worth reformatting my iPod for my Mac? I think if I leave in PC format, my i
-
Is there any way the AP DIV layer can work in a centered layout and move with the other elements on my web page? Murray, I asked before about the rollover images and the grid design with photos. You gave me a solution but I couldn't even find some of