Report Status is Not Displaying in My history

Hi All,
There is no history details are displayed in history but it was appear in schedule tab.
Can anyone tell me how to fix it
Regards

Hi,
Please ask your ABAPer to check whether there is any restriction on the BLART (Document type) field while selecting the data from BSEG or BSID/BSAD table.
ABAPer need to include the AB document type while selecting the data.
Regards,
Gaurav

Similar Messages

Enforcement states for a deployment report status is not refresh..

Enforcement states for a deployment report status is not refresh.
We have deployed patches by software update and monitoring status by checking report
Enforcement states for a deployment. We have observed status difference in report and in actual PC. Status of One PC is
Downloaded update in report but actually that patch was
installed on PC.
why this difference and what is the solution to solve this.

Hi Garth - I don't recreate the SU group. I recreate the deployment from
the SU group.
The SU Group contains all deployed updates and the deployment is a "catch-up" and targets a collection of all clients on the particular platform ie. Server 2008 R2. It's a mandatory deployment and I've set it to report "all messages" as opposed to the default
"success and failure".
There's no particular SU that are showing ESU. It's the client that shows ESU via the report "Enforcement States for a Deploymennt", and it's only ever the clients that were "Pending System Restart" previously that change to "Enforcement State
Unknown". The software centre on these clients all know they're pending restart, and if the pending restart is performed on the client it will then change to "Compliant", but it never changes from ESU while its real state is "Pending Restart".
Hopefully that clarifies the scenario.
Like I said, I have a workaround, but I'd like to eliminate this behaviour on all my SCCM 2012 instances which are all affected.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

Interactive report: third screen not displaying

Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC2'.
      IF R_SELFIELD-FIELDNAME = 'LIFNR'.
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PM

Use both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.                      " Field name SPMON
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'.              " ELSE FIELDNAME LIFNR
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
        SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
Regards,
Gurpreet

Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

Problem in report .if i run the report it is not display the quantity,price

This program is an AP Standard Price Variance Report. For each Material it details all invoices created for that material including the quantity invoiced, the actual Unit Cost for invoiced quantity and the actual   amount invoiced. For each material/Vendor combination, it totals and compares the actual quantity, Unit Cost, and the amount with standard quantity, Unit Cost and amount. The amount difference   equals the   total   deviation.
problem in if run the report under material have items but one of the item not displaying quantity and cost but it is calcualting
displaying the total invoice cost ..but under material number it is showing 0...
if it_bkpf-blart eq 'WE' or
       ( it_bkpf-blart eq 'WA' and
     ( it_bseg-werks = '09' or it_bseg-werks = '99' ) and "DV2K927836
         ( it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010' ) ).
      it_detail-menge      = it_bseg-menge.
    endif.
    it_detail-werks      = it_bseg-werks.
    it_detail-hkont      = it_bseg-hkont.
    it_detail-hkont_desc = ws_hkont_desc.
    it_detail-belnr      = it_bkpf-belnr.
    it_detail-blart      = it_bkpf-blart.
    it_detail-lifnr      = ws_lifnr.
    it_detail-lifnr_desc = ws_lifnr_desc.
    if it_bkpf-blart eq 'RN'
       or it_bkpf-blart eq 'RI'
       or it_bkpf-blart eq 'RF'
       or it_bkpf-blart eq 'RC'
         or it_bkpf-blart eq 'RD'
           or it_bkpf-blart eq 'ER'.
      if it_bseg-menge ne 0.
        it_detail-inv_ucost = it_bseg-wrbtr / it_bseg-menge.
      else.
        it_detail-inv_ucost = it_bseg-wrbtr.
      endif.
      if it_bseg-shkzg = 'H'.          "Credit Indicator
        it_bseg-wrbtr = 0 - it_bseg-wrbtr.
      endif.
      it_detail-inv_cost = it_bseg-wrbtr.
    endif.
    if it_bkpf-blart = 'WE' or it_bkpf-blart = 'WA'.
      if it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010'.
        if ( it_bkpf-blart eq 'WA' and
        ( it_bseg-werks = '09' or it_bseg-werks = '99' ) ). "DV2K927836
          clear ws_awkey.
          ws_awkey = it_bkpf-awkey.
clear ws_mseg_werks.

This program is an AP Standard Price Variance Report. For each Material it details all invoices created for that material including the quantity invoiced, the actual Unit Cost for invoiced quantity and the actual   amount invoiced. For each material/Vendor combination, it totals and compares the actual quantity, Unit Cost, and the amount with standard quantity, Unit Cost and amount. The amount difference   equals the   total   deviation.
problem in if run the report under material have items but one of the item not displaying quantity and cost but it is calcualting
displaying the total invoice cost ..but under material number it is showing 0...
if it_bkpf-blart eq 'WE' or
       ( it_bkpf-blart eq 'WA' and
     ( it_bseg-werks = '09' or it_bseg-werks = '99' ) and "DV2K927836
         ( it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010' ) ).
      it_detail-menge      = it_bseg-menge.
    endif.
    it_detail-werks      = it_bseg-werks.
    it_detail-hkont      = it_bseg-hkont.
    it_detail-hkont_desc = ws_hkont_desc.
    it_detail-belnr      = it_bkpf-belnr.
    it_detail-blart      = it_bkpf-blart.
    it_detail-lifnr      = ws_lifnr.
    it_detail-lifnr_desc = ws_lifnr_desc.
    if it_bkpf-blart eq 'RN'
       or it_bkpf-blart eq 'RI'
       or it_bkpf-blart eq 'RF'
       or it_bkpf-blart eq 'RC'
         or it_bkpf-blart eq 'RD'
           or it_bkpf-blart eq 'ER'.
      if it_bseg-menge ne 0.
        it_detail-inv_ucost = it_bseg-wrbtr / it_bseg-menge.
      else.
        it_detail-inv_ucost = it_bseg-wrbtr.
      endif.
      if it_bseg-shkzg = 'H'.          "Credit Indicator
        it_bseg-wrbtr = 0 - it_bseg-wrbtr.
      endif.
      it_detail-inv_cost = it_bseg-wrbtr.
    endif.
    if it_bkpf-blart = 'WE' or it_bkpf-blart = 'WA'.
      if it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010'.
        if ( it_bkpf-blart eq 'WA' and
        ( it_bseg-werks = '09' or it_bseg-werks = '99' ) ). "DV2K927836
          clear ws_awkey.
          ws_awkey = it_bkpf-awkey.
clear ws_mseg_werks.

In IC WebClient Date and time not displaying in Interaction History

Hi All,
In IC webclient, Date and time is not displaying for some activities in Interaction History.
Thanks
Hemalatha

HI HEMA,
I AM ALSO CHECKING THAT 1. I AM NOT GETTING ANY SOLUTION. CAN U TELL ME AFTER GETTING THE SOLUTION.
THANX
CHINMAYA
Edited by: Chinmaya Parida on Feb 7, 2008 3:38 PM
Edited by: Chinmaya Parida on Feb 7, 2008 3:42 PM

SSRS Report - background image not displaying in MHTML email

We have a report that has a rectangle with an image as a background (doesn't make any difference whether image is external, embedded, etc). The background image displays fine on the screen and when exporting to PDF, but doesn't show when emailing (via subscription)
in MHTML format and opening in MS Outlook, gmail, etc.
It seems to be a legitimate bug with SSRS (have tried in SSRS 2008 R2, 2012, 2014).
Is there a workaround? Service Pack?

Hi Corey Gray,
Per my understanding that the background image in the email subscription not display which format is MHTML, right?
I have tested on my local environment and can reproduce the issue. I deliver this report to three email amounts: Outlook, Hotmail and 163, below I will share the test results with you.
Outlook: the backgroudimage disappear in the email body and there is no one attachment being sent in the email.
Hotmail: the backgroudimage disappear in the email body, however, the backgroundimage being sent as one attachment in the email.
163: the backgroudimage displays in the email body and the backgroundimage being sent as one attachment in the email.
Based on previous test results, we can conclude that: these different scenarios caused by the settings of the email rather than Reporting Services.
If you are using Outlook, I would recommend you submit one thread in this Outlook forum,
http://social.technet.microsoft.com/Forums/en-us/outlook/threads.
In this forum, you can get more professional support about how to set the Outlook.
If you have any other question, please feel free to let me know.
Regards
Vicky Liu

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

COOIS- Report Grid Value not displaying

Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam Perumal

Hi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P

Report Painter - Values not displaying

I have a report created in Report Painter using Library 1GK that shows the total units. When I run the report for all cost centers the data does not display. I can explode the row and see the values but not total. I can export the data and the values export. This happens for both units and hours. Any ideas?
Thank you!
Helen

Please check the Section layout for your report and review the Rows tab. The Miscellaneous area has Mark Totals and Suppress duplicated totals. Treatment of zero rows can also be checked, may be the total of debits and credit of individual rows are totalling to zero. Just a guess.

Interactive report's data not displaying on the edit form.

I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.

Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad

Crystal Report for Enterprise not displaying Long Text from BEx

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report. Can I display long text in the Crystal Report? How?
Thanks,
KP

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Security report SEC_LIST_MBR is not displaying users list

Hi,
When we run security report SEC_LIST_MBR. It is not displaying list of users instead it is just displaying user id who ran the report all other columns Full Name, Teams, Task Profile and Member access are blank.
Please suggest what is causing it not to display list of users.
In database we loaded the following page http://ReportServer/reports and ran report SEC_LIST_MBR. It also gave same result - one row with user id data only.
Regards,
Rajesh

We found the root cause it was because table "task" does not have records in APPSERVER Database.
Once we updated task table. Security report SEC_LIST_MBR is displaying results correctly.
Regards,
Rajesh

Report Status is Not Displaying in My history

Similar Messages

Maybe you are looking for