Report sum on the first row

Hi All,
i have an report with a few columns an i sumerized them by clicking on the sum checkbox. My report result into data with a nice sum row at the bottom of the report.
The question is, is it possible to get this summary line to the beginning of the report as the first row of the report ?
Regards,
Marco

Yes, but you got to do that yourself like in this example using analytic functions:
http://apex.oracle.com/pls/otn/f?p=31517:86
You may put your totals wherever you want.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Grand total level of the percentage column giving value from the first row of column

Hi Guys,
I have a requirement like to show the percentage value which the calculation of two columns , in the grand total level .
I think it can be achievaable by giving the aggregation rule for that column as Server complex Aggregate .
eg.
Fiscal Year Department subdepartment   Total cost     Sub Department cost     % cost
2011           Edu             Books                 500              50                               10
2011           Edu             Note Book           200            100                                50
2011           Edu             Furniture             300             30                                 10
2011            Edu                                      1000           180                              18
Grand Total
Ideally it should come like as above ..but the problem with me that ,it showing correct value for all the rows ,but at the grand total level it's taking the value of % cost from the first row . like below..
2011           Edu                                   1000                  180                         10
Grand Total
I have calculated the % cost column in the answer itself as (Sub Department cost /Total Cost )
where the
Aggregation rule for the columns given are
Total Cost - Sum ,Sub Dep Cost - Sum, % Cost - Server Complex Aggregate
So plz suggest me any Idea to achieve this ..Thanks in advance.

Give the agg. as avg for % field.
Best of Luck,
Kashi

How do I set only the first row of a DataGrid as the selected row?

I have a "Go" button on a search form that fetches data into an already data bound grid. After the data is fetched, I want to make the first row in the Datagrid the selected row, as if the user clicked on it. If the result set is empty, I don't want the code to crash. (I only want one row to be able to be selected at a time)
            protected function btnGo_clickHandler(event:MouseEvent):void
                getSBJsResult.token = baa_data_svc.getSBJs(cmbSrch.text);
                grdSBJs. // ????? What goes here to select the first row?

This should do it.
If this post answered your question or helped, please mark it as such.
if(myDataGrid.dataProvider.length > 0){
myDataGrid.selectedIndex = 0;

How can I get Numbers to return the first row in a group of VLOOKUP query results instead of last one?

I'm trying to query from one table (call it Table1) a batch of rows in another table (Table2) using VLOOKUP on a date specified in the first table (Table1). My problem is it's returning the last incident in Table2 of the requested date instead of the first incident. This really breaks the OFFSET scheme I'd like to use to collect the rest of the items for that date. Is there some way to compel VLOOKUP to return the first row of query results, not the last?
NOTE: I see I've asked this before, but forgot to go back and look at responses given. It's been a while and I've limped along until now with the way things were. I'm actually trying to delete this questions, so if you see it, ignore it. I suppose if someone can tell me real quick how to delete a stupid question, that might be helpful.

you cannot delete a post yourself. You can flag the post an request a moderator remove.

How to skip the first row in Text file (in Sql Loader)

Hi All,
How to say the control file to skip the first row of the text file..
i just going this example
this is my text file:
01308201222455038130820122245503813082012224550382
1090358 474661834012245503813082012 0075 0 00000000000 000000000 00000130820120000000000000000 136.84 -833.3911082012 000000 000 009035847466183 090358 47466183 0015007514300000970001430000097700BH1150274792012081320120811201208122012-08-11-22.45.50.38369899999.0075LIQJGL17
Control file:
OPTIONS
DIRECT = TRUE ,
PARALLEL = FALSE ,
SKIP = 1,
ERRORS = 0
UNRECOVERABLE
LOAD DATA
INFILE <"FILE_DIR">
BADFILE <"FILE_DIR">
INSERT
INTO TABLE DAILY_TRANSACTION
WHEN (1:1)='D'
TRAILING NULLCOLS
Above the Eaxmple text file i need to Skip the first row which is
01308201222455038130820122245503813082012224550382
please can anyone suggest me is this correct?
if not please correct me please
since two days i been serching but i didn't get any thing
Thank's
Edited by: Lavanya on 24-Sep-2012 00:51

Lavanya wrote:
Hi Jeneesh,
Thank you for your prompt replay
I didn't try to load this control file
And i need one more question
I have Text file in my Machine which Contains very huge data so i was wrote one control file for that, and i got FTP connection also as well as.
My question is firstly I need to PUT the Text file Into Unix Server isn't?
so when i trying to put the text file into unix it's giving an error
ftp>put c:/abc.txt
Not connectedYou haven't succesfully made your FTP connection to the server.
e.g.
c:\>ftp
ftp> o testserver
Connected to testserver.mycompany.com.
220 testserver FTP server ready.
User (testserver.mycompany.com:(none)): myuser
331 Password required for myuser.
Password:
230 User myuser logged in.
ftp>then you can use FTP to put your data to the server. Remember, if you are transferring a text file from a windows based operating system to a unix server you need to put it in ASCII mode...
ftp> ascii
200 Type set to A.
ftp>which will automatically convert the windows CR/LF pairs to the single LF character used by unix.

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

Get only the first row for duplicate data

Hello,
I have the following situation...
I have a table called employees with column (re, name, function) where "re" is the primary key.
I have to import data inside this table using an xml file, the problem is that some employees can be repeated inside this xml, that means, I'll have repeated "re"'s, and this columns is primary key of my table.
To workaround, I've created a table called employees_tmp that has the same structed as employees, but without the constraint of primary key, on this way I can import the xml data inside the table employees_tmp.
What I need now is copy the data from employees_tmp to employess, but for the cases where "re" is repeated, I just want to copy the first row found.
Just an example:
EMPLOYEES_TMP
RE NAME FUNCTION
0987 GABRIEL ANALYST
0987 GABRIEL MANAGER
0978 RANIERI ANALYST
0875 RICHARD VICE-PRESIDENT
I want to copy the data to make employees looks like
EMPLOYEES
RE NAME FUNCTION
0987 GABRIEL ANALYST
0978 RANIERI ANALYST
0875 RICHARD VICE-PRESIDENT
How could I do this?
I really appreciate any help.
Thanks

Try,
SELECT re, NAME, FUNCTION
FROM (SELECT re,
               NAME,
               FUNCTION,
               ROW_NUMBER () OVER (PARTITION BY re ORDER BY NAME) rn
          FROM employees_tmp)
WHERE rn = 1G.

Getting the first row for each group

Hi Everyone,
I have a query which returns a number of rows, all of which are valid. What I need to do is to get the first row for each group and work with those records.
For example ...
client flight startairport destairport stops
A fl123 LGW BKK 2
A fl124 LHR BKK 5
B fl432 LGW XYZ 7
B fl432 MAN ABC 8
.... etc.
I would need to return one row for Client A and one row for Client B (etc.) but find that I can't use the MIN function because it would return the MIN value for each column (i.e. mix up the rows). I also can use the rownum=1 because this would only return one row rather than one row per group (i.e. per client).
I have been investigating and most postings seem to say that it needs a second query to look up the first row for each grouping. This is a solution which would not really be practical because my query is already quite complex and incorporating duplicate subqueries would just make the whole thing much to cumbersome.
So what I really new is a "MIN by group" or a "TOP by group" or a "ROWNUM=1 by group" function.
Can anyone help me with this? I'm sure that there must be a command to handle this.
Regards and any thanks,
Alan Searle
Cologne, Germany

Something like this:
select *
from (
   select table1.*
   row_number() over (partition by col1, col2 order by col3, col4) rn
   from table1
where rn = 1In the "partition by" clause you place what you normally would "group by".
In the "order by" clause you define which will have row_number = 1.
Edit:
PS. The [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions004.htm#i81407]docs have more examples on using analytical functions ;-)
Edited by: Kim Berg Hansen on Sep 16, 2011 10:46 AM

How to highlight the first row of a table

When entering the form, how do I get the first row of the table to be highlighted when it has not been selected yet? There is already data in the table. Thanks.
Allyson

Any ideas on what would cause this NOT to work? I added this row right after the table is created and populated and it is still not highlighted when I enter the form. The snippet of code that does this is:
MyTableModel modelS = (MyTableModel)dataModel.get("S");
jTable1 = new JTable(modelS);
jTable1.setRowSelectionInterval(0,0);MyTableModel is this:
class MyTableModel extends DefaultTableModel {
public MyTableModel(Object[] columnNames, int numRows) {
    super(columnNames, numRows);
public boolean isCellEditable(int row, int column) {
    if (TableKey == 'S') {
      if (column == 6) {
        return false;
    if (TableKey == 'O') {
      if (column == 0 || column == 4 || column == 5) {
        return false;
    if (TableKey == 'P') {
      return false;
return true;
}Can anyone help? Thanks.
Allyson

Infopath submit button only works for the first row in a repeating table‏

Hi, I have a InfoPath Email submit button issue I could not figure out. I have a master/detail repeating table in my form, and one of fields is "EmailAddress" which shows customer's email address. I created a submit button and put the "EmailAddress"
field to "TO" object. When I tested it, the submit button only would return the first row of emailaddress from the repeating table, but not the rest of it..
What I want is when I highlighted a customer, and click the submit button, the current customer's email address would show up in "TO" list. I did some research and saw some suggestions about using current() function. So I put current() in the front,
like this:
current()/dfs:dataFields/d:vw_HZLeadLists/@EmailAddress
Still not working..Just return the first record of emailaddress from master repeating table... Does anyone know what's going on here? Thanks a lot!

Hello,
Use double eval to get all rows values. See my reply for more information in below thread:
eval(eval(EmailAddress, 'concat(ToField, ";")'), "..")
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc22aeb7-351f-45a7-8a4c-94132c3e0db2/eval-semicolon-function-issue?forum=sharepointcustomizationprevious
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to ignore the first row in sender file

I would like to ignore the first row in each file in the sender channel - how can i do it?

Hi
Check this,
As he said give Document Offset = 1
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Also check this forum
Re: Supress Column Heading - File Content Conversion in Sender Adapter
Thanks,
Prakash

How to disable the first row of an ALV Grid?

Hi All,
      I am working on a module pool programme. I am displaying ALV grid. I have to give some default values in the first row and disable it. I have to disable the third column and fourth row value. How can i achieve this?
Help will be appreciated.
Thanks,
Ibrahim.

here is the code i have written....but its not working...
TYPES : BEGIN OF tp_grid,
        fname(25)   TYPE c,
        reqd,
        seqno       TYPE n,
        tl_styl TYPE lvc_t_styl,
        edit,
        END OF tp_grid.
DATA : wl_styl TYPE lvc_s_styl.
DATA : wl_layout TYPE lvc_s_layo.
DATA : lt_celltab TYPE lvc_t_styl.
READ TABLE tl_grid INTO wl_grid INDEX 1.
wl_styl-fieldname = 'TAG NUMBER'.
wl_styl-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT wl_styl INTO TABLE lt_celltab.
INSERT LINES OF lt_celltab INTO wl_grid-tl_styl index 1.
MODIFY tl_grid INDEX 1 FROM wl_grid.
wl_layout-stylefname = 'TL_STYL'.
CALL METHOD l_initgrid->set_table_for_first_display
    EXPORTING
      is_layout                     = wl_layout
    CHANGING
      it_outtab                     = tl_grid
      it_fieldcatalog               = tl_init_fcat
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
ENDFORM.                    " display_initgrid
Help will be appreciated....
Thanks,
Ibrahim

How to keep the first row fixed in a JTable, with sorting, and bellow the headers ?

I am trying to change the following code so then the fixed rows will stay on top(but below the headers!), but when I change getContentPane().add(fixedScroll, BorderLayout.SOUTH); to getContentPane().add(fixedScroll, BorderLayout.NORTH); it stays above the headers. How can I put the first rows on top, but below the headers ? Thanks.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
* @version 1.0 03/05/99
public class FixedRowExample extends JFrame {
Object[][] data;
Object[] column;
JTable fixedTable,table;
private int FIXED_NUM = 2;
public FixedRowExample() {
    super( "Fixed Row Example" );
    data = new Object[][]{
        {      "a","","","","",""},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {"fixed1","","","","","","",""},
        {"fixed2","","","","","","",""}};
    column = new Object[]{"A","B","C","D","E","F"};
    AbstractTableModel    model = new AbstractTableModel() {
      public int getColumnCount() { return column.length; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedModel = new AbstractTableModel() {
      public int getColumnCount() { return column.length; }
      public int getRowCount() { return FIXED_NUM; }
      public Object getValueAt(int row, int col) {
        return data[row + (data.length - FIXED_NUM)][col];
    table = new JTable( model );
    table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    table.setAutoCreateRowSorter(true);
    fixedTable = new JTable( fixedModel );
    fixedTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    JScrollPane scroll      = new JScrollPane( table );
    scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
    JScrollPane fixedScroll = new JScrollPane( fixedTable ) {
      public void setColumnHeaderView(Component view) {} // work around
                                             // fixedScroll.setColumnHeader(null);
    fixedScroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    JScrollBar bar = fixedScroll.getVerticalScrollBar();
    JScrollBar dummyBar = new JScrollBar() {
      public void paint(Graphics g) {}
    dummyBar.setPreferredSize(bar.getPreferredSize());
    fixedScroll.setVerticalScrollBar(dummyBar);
    final JScrollBar bar1 = scroll.getHorizontalScrollBar();
    JScrollBar bar2 = fixedScroll.getHorizontalScrollBar();
    bar2.addAdjustmentListener(new AdjustmentListener() {
      public void adjustmentValueChanged(AdjustmentEvent e) {
        bar1.setValue(e.getValue());
    scroll.setPreferredSize(new Dimension(400, 100));
    fixedScroll.setPreferredSize(new Dimension(400, 52)); // Hmm...
    getContentPane().add(     scroll, BorderLayout.CENTER);
    getContentPane().add(fixedScroll, BorderLayout.SOUTH);
public static void main(String[] args) {
    FixedRowExample frame = new FixedRowExample();
    frame.addWindowListener( new WindowAdapter() {
      public void windowClosing( WindowEvent e ) {
        System.exit(0);
    frame.pack();
    frame.setVisible(true);

Sorry, this code missed a very important line:
table.setAutoCreateRowSorter(true);
So you meant:
Object[][] header;//class atribute
header=new Object[][]{//in the constructor
            { "h","i","j","k","l","m"},
            { "h","i","j","k","l","m"}
public Object getValueAt(int row, int col) {//in the TableModel
        if (row==0){
            return header[row][col];
        else {
            return data[row][col];
I tried, but when I sort, the first row get sorted with the rest.

How to set the first row as selected in single selection of table

when the page renders how do we make the first row as selected for single selection in a table.
Thansk a lot for your help

set the selection Attribute's value to 'Y' for the first row. Thats enough.
eg;
Row row=vo.first();
row.setAttribute("SelectionAttribute", "Y");
--Prasanna

How to include the first row of detail in every xquery transformed xml?

I am dealing with a XML file,where i need to publish to different BS.
First node will be a common node node which contains vital info,second node goes to one BS and third goes to another BS.
*<header></header>*
*<details></details> (they are unbounded, but the first detail tag which comes in the input file is a mandatory tag in such a way that it needs to be included in every transformed message)*
*<trailer></trailer>*
We need to apply x query transformation on it in such a way:
*</header></header>*
*<1st detail></1st detail>*
*<detail></detail> (2nd row of detail in input file)* -------------------------> Goes to BS1
*<trailer></trailer>..*
*<header></header>*
*<1st detail></1st detail>*
*<detail></detail> (3rd row of detail in input file)* ----------------------------->Goes to BS2
*<trailer></trailer>*..
And so on.
Now, the problem is how to include the first row( *1st detail* ) of detail in every xquery transformed xml?

are you looping of this input with a for each?
/yourdata/details[1] should return always the first detail element.
or before the for each do an assing of this first detail element to "generic_details_var"
and use this var in every looping iteration (in an assign or as input for xquery)

Report sum on the first row

Similar Messages

Maybe you are looking for