Report T.code for LS1,Ls2,Ls4,Ls8

hii.....
by which t,code we can see the report about ls1,ls2,ls4 ,ls8.pls tell me standard t.code to see the reports.
Thanks & Regards
Rekha Sharma

Hi
Kindly explain what is LS?
Thank You,

Similar Messages

  • Standard report(t.code) for open deliveries

    Hi Friends,
    can anyone give me standard open delivery report T.code.
    thanks
    nitchel

    Hi nitchel
    check the standard reports which may help you
            VL06 ---      Delivery Monitor
      *     VL06C --     List Outbound Dlvs for Confirmation*
      *     VL06D--      Outbound Deliveries for Distribution*
      *     VL06F --     General delivery list - Outb.deliv.*
            VL06O ---      Outbound Delivery Monitor
    Regards
    Srinath

  • Report (T.CODE) for pending PO for release..VERY URENT

    Hi guru's
    First i wiil tell clearly abt my requirement, i wnt to get a report(list) of pending PO for release (i want to view the PO, but i dont want the option to release PO).In ME28 there is option to view pending PO for release and also for option to release.
    So i went to T.code ME2N, and i create a new scope of list in SPRO.
    For reporting , in SPRO i have made (pending for PO release(PPFR) in Scope of list).
    To get the exact report in Front end , any further SPRO activites is there to get a report.
    Goods solution will be highly rewardable..
    Please send me immediately.. urgent..
    Thanks
    sap-mm

    Hi
    Simple method for resolving your issue is,
    1.Goto Release PO Tcode:me29n
    2.Click Selection Variant under document overview on
    3.Click Purchase orders option
    4.Click Dynamic selection
    5.Click purchasing document header
    6.Select Subject to release option
    7.Choose yes "X" and press enter
    8.Enter company code under relevant field
    8.Create variant and save variant
    9.Execute the screen
    It will list all the pending PO's for approval.
    Reward point if it is useful.
    regards
    DVP

  • CUIC Agent Real-time reporting reason code

    Hi,
    In CUIC agent real time report reason code for not ready it shows 50002 or integer we have configured in ICM.
    How we can display reason code as name which we have configured in icm like tea, coffee , meeting.
    CUIC version we are using 8.5.
    Regards,
    Dinesh Joshi

    The way I got round this was creating thresholds - eg 1 = Lunch 2 = meeting etc.
    this does work, however you can't then Threshold the time on those particular texts, but at least you can see what 'state' they are in.
    let me know if it works..
    Thanks Sarah

  • Creation of Transaction code for Reports created in FGI1.

    Hi all,
       We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
       We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4.  When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
       Appreciate your suggestion at the earliest.
    Thanks
    Dasa

    Hi
    Check TSTCP table  for the existing t-codes and for creating check this link
    Re: Transaction Code Creation for a Table/View
    Regards
    Pavan

  • How to Create Transaction code for a Report

    Hi Gurus,
    I created some reports and I wants those reports
    should be placed in the SAP Menu(initial screen) not
    in the User menu in the form of Transaction codes.
    I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
    Thanks in Advance
    Danial

    Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
    Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
    Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

  • Transaction code for Depricitation Report

    Hi,
    we have asset accouting with WDV Method & maintaing our books as per F.Y. April to March
    But, due to foreign investor's investment, we have need to closed our books, twicely, i.e.  IFRS - F.Y.-Jan to Dec / ( US gap ) & Indian gap, FY. April to March.
    Currently, We are using, AR03 trasaction to view the Depriciation Report (Asset Register)
    My problem is, when we run the Deprication report for IFRS Books closing, we could't get report, properly, because of our F.Y. maintan April to March.
    in that case we have need to maintain Manually on XLS.
    Please tell me any transaction code for depriciation report for IFRS  Books closing as well as Indian Gap.
    Thanks
    Regards
    Jitendra

    dont you have an option in there to run based on your depreciation area? Select your depreciation area and the report date based on your fiscal year variant. Optionally, you can also try reports like S_ALR_87012006 - Ordinary Depreciation, and S_P99_41000192 - Posted depreciation by asset and posting period with depreciation area selection.

  • Transaction code for report

    Hi All,
    I am new to SAP area. I have created ABAP program (Report and variant) which generate list of materials. User would like to run whenever they want and have little knowledge of SAP. So I would like to provide Transaction code for this report to user. Can anyone let me know how to create transaction code for report. Also suggest, if any other option available to provide the same to user.

    Hi Yogesh,
    Just as an option, you necessarily dont need to create a transaction so that the user can run the report. You can include the report in the menu for the user within his role to which he is assigned.
    Hence on SAP easy access screen when he logs in, the user would be able to see the report  all he needs to do is double click.
    Just an option for you.
    Regards,
    Aditya
    p.s. Transaction for role maintenance is PFCG .... refer to your basis consultant for more information

  • Code for reports field

    Hello,
    In Administration -> Setup -> Business Partners -> Countries there is a field called 'Code for Reports'.  Does anyone know what this field is for?  I thought it was for possibly putting in a different variation of the country code, e.g UK instead of GB to be displayed on printouts however it is not being displayed when i print preview/print.
    Any advice is appreciated.
    Many thanks,
    Kate

    Hi Gordon,
    I've tried displaying code on the print layout too but this does not get pulled through either.  I would like to use the 'code for reports' field to display 'UAE' instead of 'AE'. 'AE' is the default country code for United Arab Emirates which cannot be changed however the users would like to see 'UAE' instead.
    Kind regards,
    Kate

  • Transaction Code for Cost Center Report

    Hi everyone,
    using report painter I have created a cost center report which is a copy of a standard report. Now I would like to create a transaction code for this report which can be run from the menu.
    Can anyone explain step-by-step how to do this? I have already tried creating a TC for GR55 but this seems not to be what I want. I want the TC to start the report directly.
    Thanks in advance for your help!
    Regards,
    Martin

    Hi,
    Go to SE93 (create a new transaction), choose 'Transaction with parameters'. In the Transaction field put 'START_REPORT' and tick 'Skip Initial screen' flag. Tick all flags for GUI support and in the parameters section (below) type four parameters:
    D_SREPOVARI-REPORTTYPE = RW
    D_SREPOVARI-REPORT = (library of reports)
    D_SREPOVARI-VARIANT
    D_SREPOVARI-NOSELSCRN
    Regards,
    Eli

  • Transaction code for Custom report

    Hi,
    How to create transaction code for Custom report ?
    the custom report is a drilldown report of COPA, which can seen in tcode  FDI3.
    then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
    Thanks,
    Swetha

    Hi Swetha,
    There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
    Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
    --Ram

  • Transaction code for SAP query reports

    Hi All,
    I am trying to create transaction code for sap query report but couldn't go further.
    1) Created User group in SQ03
    2) Created infoset in SQ03 and assigned that to the user group
    3) Created query in SQ01 using the infoset.
    I executed the report in SQ01 and it is working fine.
    Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
    Assign transaction code to SAP Query (created via SQ01)
    But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
    Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
    Thanks in advance

    HI,
    based on the thread you've already mentioned:
    In SE93, Create a Paramter Transaction
    -> Transaction = Start_report
    -> In default values, give the below details:
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-EXTDREPORT = Name of the Query
    D_SREPOVARI-REPORT = User Group
    So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
    best regards, Christian

  • Is there any transaction code for uploding logo in ALV reports.

    is there any transaction code for uploding logo in ALV reports.

    hi,
    call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
                i_logo             = 'Z_LOGO'.
    endform.
    Upload Logo for REUSE_ALV_COMMENTARY_WRITE
    For those who wish to upload and use a picture in your ALV abap reports.
    Steps for uploading Logo :-:
    1. Goto the transaction OAER
    2. Enter the class name as 'PICTURES'
    3. Enter the class type as 'OT'
    4. Enter the object key as the name of the logo you wish to give
    5. Execute
    6. Then in the new screen select Standard doc. types in bottom window
    Click on the Screen icon
    Now, it will ask for the file path where you have to upload the logo
    7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
    or
    Import Logo and Background Picture for Reporting
    In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
    From the SPRO:
    HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
    Activities
    1. Enter the Name of your logo/background picture as an object key in the initial screen.
    2. Make sure that the class name is PICTURES, and the class type is OT.
    3. Choose Execute.
    4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
    5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
    6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
    Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
    If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
    Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

  • One Transaction code for many reports

    Dear all,
    I have some new requirement in Profitability Analysis for each new country a new currency and operating concern is to be define. and for each of this it is necessary to create a transaction code respectively  per new operating concernThis will lead to a high number of transaction codes in the Area menu for the Standard reports in CO-PA.To avoid this high no. of transaction codes, two help transaction have to be created, to act as a transaction for calling the correct report or transaction for the respective OC. The result will be, that only this new transactions (one for the EBIT report; one for the MI IIa report) will be in the area menu The function of these transactions is to call the correct transaction or report for the regarding OC. so I am required to create 2 new transactions which will do all the things .
    any body have idea how to go about it . and any help code
    Thanks & Regards
    Vinayak

    .

  • Creating T-Code for Report in Report Painter

    Hi Experts,
    I need to create a T-Code for a report Z22KST2 in transaction CJE0 under the report type 001.Please suggest.
    Thanks in advance.
    Anand patil

    Hi
    Go to SE93
    enter the TCODE you wants to create for this report painter report
    Select the PARAMETER trasaction radiobutton.
    Enter the description and transaction as START_REPORT
    enter the REPORT TYPE and REPORT in the down
    D_SREPOVARI-REPORTTYPE      = < Report Group>
    D_SREPOVARI-REPORT  =      <report>
    Check this -
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22
    Re: Interactive ALV
    Reward points if useful
    Regards
    Anji

Maybe you are looking for