Report that display 'Net Pay' by Empl for current and previous period.

Hi,
We are looking for a SAP report that display 'Net Pay' by Employee for current and previous period in USA payroll module. If you know of any, pl let me know.
Thanks in advance,
Niranjan

Thanks Archana and Sikindar.
We knew about this report, however, it gives information one below the other if we run, say for 2 periods, but what we are looking for is something as shown in example below
Empl #      Empl # Name    Prev Pay period Net Pay        Current Pay period net pay.
123              XYZ                     $ 1200.00                                 $ 1200.00
256              ABC                    $ 2000.00                                $ 3000.00
We want to run for 2 periods at a time and get the results as above. That way, payroll dept can run this report and compare if we are paying too much in current pay, compared to previous pay. This is basically to avoid any typos when they create new pay records in infotype 0008.
Niranjan

Similar Messages

Selective deletion in DSO for current and previous year

Hi,
Can any one give an idea how can I selectively delete current and previous year data (only). is there any process type that can help me in process chains. This should be before loading a fresh load for the same period. this is for psodo delta.
or
any other alternative, plz. suggest.
Thanks
ganesh
Edited by: Ganesh on Jul 7, 2008 12:08 PM

Hi,
If you have any date value example posting date or 0CALMONTH.., you can filter the date using the selection conditions and selectively delete the data.
Process:
Manage of DSO->Contents Tab->Selective (with delete Icon)->Deletion selections->give the period->Execute->Start->Yes->continue.
Hope this helps..........
Rgs,
I.R.K

Report that display salary for employee from this year and prvious year

Hi
How to do a report that display salary for employee from this year an previous year, my table has from period and two perid?
Thanks

You could try something like this but you MUST learn how to post questions! Very few members will help you if you word your question poorly or forget to mention vital imformation!
select distinct ty.id, ty.emp, ty.sal, ly.sal
from (select distinct id, userid, sal
from salary_table
where id = 123456
and from_period = '01-JAN-2010'
and to_period = '31-DEC-2010') LY,
salary_table TY
where ty.id = 123456
and ty.from_period = '01-JAN-2011'
and ty.to_period = '31-DEC-2011'

Invoices report that displays also the VAT number

Hi
I am looking for invoices report that displays also the customer/vendor name and its VAT registration number.
The customer invoices are SD invoices (can be displayed using the FI) and the supplier invoices are MM or FI invoices.
It is relevant for the supplier invoices (MM/FI) and for the customer invoices (two seperate reports)
Thanks
Ofer

Hi Edgar,
As per my understanding, std SAP report won't fulfill your requirement. Best approach would be a custom report where you can update the required fields.
Regards,
Chandru

Report that displays 'z'program,t-codes,user-ids,list of clients

Hi everyone
i have a requirement.
i need a report that displays all t-codes,all zee programs,all the user-ids,all the clients logins available and status of hotpack application i.e. ABAP,SD,FI/CO,MM and others.
i know that all t-codes are in table TSTC and user-ids in USH02, USH04, USR01, USR02, USR03.
for the rest do suggest me the tables.
if anyone know the answer pls do reply.
Regards
Venkat
will reward with points and thanks in advance.

hi,
the table that store all zprograms with their user id's is TRDIR.
in the selection screen if u specify the zprogram name and user id.
if u specify user id u will get the list of programs that were done by the particular user.
please reward me if helpful.
thanks,
gupta.

How to Build a Report that display values Current + 11 consuctive Months

Hi Experts,
Could you please update me on how can achieve...this
I want to develop a forecast report that can be analysed either by WEEKLY,MONTHLY and QUARTERLY.
for the current+ 11 respective time chars
In the first screen the user selects how he want to analyze report...Weekly,Monthly or Quarterly (By checking in Radio Button)(user won't enter any date variables)
If he selects WEEKLY then it should provide how many Policies (count) are going to mature current week,next week.....12th from the current week
If he selects MONTHLY then it should provide how many Policies (count) are going to mature current month,next month.....12th month from the current month
Like wise Quarter
Further able to Drill down by employee.....policy mature date...etc
I got 0Calday,0Calmonth,0Cal year/Month ,quarter and Policy Mature Date,Employee No....etc.
Please update me

Hi Wondewossen
Thanks for the update.....
Can i develop a report which shows....monthly
Current Month.....Current Month1....Current Month2.....Current Month+11
and
an option to use to drill down on this to weekly and daily
CURRENT MONTH should be from Current day to end of current month
Example:
If user execute report on 01/03/2008 it shoul display policies that expire from 01/03/2008 to end of month (30 Days) in current month column
If user execute report on 21/03/2008 it shoul display policies that expire from 21/03/2008 to end of month(9 Days) in current month column
I shall be greatful if any one can explain me how can i acheve this in detail steps
Thanks

Report that displays Costcenter , Document Number and Document type

Hi All,
Can anyone suggest Report that displays Costcenter for a Document Number of certain Document type - Like G/L accounts .
Thanks in advance ,
Regards,
Ry

Good afternoon.
If you are trying to run a report for a particular cost center (or range of cost centers) and have the report show the GL document number and document type, try transaction KSB1. You can update the line layout to show these fields.
If you are trying to run a report for a GL account and have the report show the cost center, run FAGLL03. You can update the line layout to include cost center.
Apologies if I have mis-understood your question.
Barb

Report to display a Cash/Cheque receipt for Vendor

Hi.,
How to Create a report to display a Cash/Cheque receipt for Vendor

Check out transactions,
F110
F.28
F-28
these transactions are used for making payments to customers/vendors.
Regards,
Raghavendra

I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty)

I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty). Would it be able to be claimed at the iStudio in Thailand?

There is NO International Warranty for the iPhone. Your best bet is to purchase one in Thailand. If you purchase a phone in France, you will NOT get warranty service on it in Thailand and will have to return it to France (or any EU country) for warranty service.

I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?

I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?

where did you get this phone from

Hi, i'm paying every mont for photoshop and lightroom, I had to bring my Mac to apple to change the hard drive, and now i want reinstall my programs, anyone can help me?

Hi, i'm paying every mont for photoshop and lightroom, I had to bring my Mac to apple to change the hard drive, and now i want reinstall my programs, anyone can help me?

Download and install the trial version(s) from https://www.adobe.com/creativecloud/catalog/desktop.html and activate them with your Adobe ID.

I jus took my phone case off my iPhone 4S that I've had on it for forever and just noticed that my phone is bent? What should I do?

I jus took my phone case off my iPhone 4S that I've had on it for forever and just noticed that my phone is bent? What should I do?

Will Apple replace my iphone?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire). I'm also going to guess that either your DirecTv or your Blueray has a component output option. If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
I doubt you will be able to tell the difference on your DTV. Most of the stores that demo HD use component wiring on their store models. The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.)
Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching. I think I use my BluRay about 5% or less of my viewing time. If I "tossed", I wouldn't shed a tear.

Report that display 'Net Pay' by Empl for current and previous period.

Similar Messages

Maybe you are looking for