"Report this post" feature

Have I missed something or has this feature just been turned back on again for Level 3s?
15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4, Mac OS X (10.4.5) Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Hi JDee
Thanks for the prompt answer - just as quick as ever
I thought they usually include some form of announcement that appears in the sidebar, or have I missed that?
15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4, Mac OS X (10.4.5) Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Similar Messages

Report this post ?

Today I just noticed a link at the bottom of posts that says "report this post". I became level 2 two days ago, and am wondering if this is new to level 2 users, or if it is new to all users as of today (march 1st). I didn't notice this yesterday, but I have been known to miss things...

818/3264
Hi maciscool,
(I agree with your name
Yes, this ancient feature was disabled until last week, that's why you didn't notice it.
Also, I'm not sure it is available to Level 1 members.
Axl

"Report this Post" Messages Bounced to Email

The last two times I used the "Report this Post" link the messages bounced back to my email address from a third-party server. I don't know if the problem resulted from a misconfigured co-location server or Apple's mail server, or if it was the result of an iframe injection or other cross-site scripting attack. I sent several messages directly to Apple about this but have not received a response. Has anyone else experienced this?
Received: (qmail xxxx invoked from network); 6 Oct 2009 00:00:00
Received: from xxx.contegix.com (HELO xxx.contegix.com) (xxx.xxx.xxx.xxx)
by xxx.xxx.xxx.xxx with SMTP; 6 Oct 2009 00:00:00
Received: by xxx.contegix.com (Postfix)
id xxxxxxxxxxx; Tue, 6 Oct 2009 00:00:00
Date: Tue, 6 Oct 2009 00:00:00
From: [email protected] (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="xxxxxx.xxxxxx
Message-Id: <[email protected]>
This is a MIME-encapsulated message.
--xxxxxx.xxxxxx/xxx.contegix.com
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host xxx.contegix.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: delivery temporarily suspended: host
xxx.apple.com\[xxx.xxx.xxx.xxx\] refused to talk to me: 554 Open proxy list.
Review your server settings.
--xxxxxx.xxxxxx/xxx.contegix.com
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; xxx.contegix.com
X-Postfix-Queue-ID: xxxxxxxxxxx
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 1 Oct 2009 00:00:00
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 4.0.0
Remote-MTA: dns; xxx.apple.com
Diagnostic-Code: smtp; 554 Open proxy list. Review your server settings.
--3883A8B3ACA.1254814094/xxx.contegix.com
Content-Description: Undelivered Message
Content-Type: message/rfc822
Received: from xxx.contegix.com (localhost.localdomain \[127.0.0.1\])
by xxx.contegix.com (Postfix) with ESMTP id xxxxxxxxxxx
for <[email protected]>; Thu, 1 Oct 2009 00:00:00
From: [email protected]
To: [email protected]
Message-ID: <[email protected]>
Subject: Notification: innappropriate message
MIME-Version: 1.0
Content-Type: text/plain; charset=ANSI_X3.4-1968
Content-Transfer-Encoding: 7bit
Date: Thu, 1 Oct 2009 00:00:00
The following post is innappropriate
\[message content\]
\--xxxxxx.xxxxxx/xxx.contegix.com--
----------

capaho,
Previous related Topics:
9/3/09 Duplicate Post Report Rejected
9/6/09 Is anyone else getting bounced email notifications for "Report this Post?".
9/8/09 Weird bounce message when I report a questionable or duplicate post
9/25/09 Does this indicate a problem on the forums
ali b

2006-Apr-25 "Report this post" change...

Hello, friends,
I noticed last evening (MDT in U.S.) that a "report this post" link has begun to appear on threads.
(I'm "L3.")
Personally, I'd seldom used the function when 'twas granted in the previous edition of Apple Discussions. So, for clarity, I presume its intent is to facilitate communicating egregious instances of misbehavior that don't comply with the Use Agreement...?
Thanks to Apple folks for returning this function, which I'd read had been "in the works" for some time. Are there any other "new" functions that I missed — or anything similar on the "to-do" list?
Thanks again,
Dean

Btw, I intermittently request that a Host "wrap" (or "fold," as you put it, Brian Z.) a post within a thread that's become difficult to read. Would that also be considered appropriate to "report this post," or would a stand-alone message be preferable
In my experience, the Hosts generally prefer that any issue that they need to decide upon is brought to their attention using the 'Report this post' link. That would include wraps and folds and other formatting issues; perceived violations of the ToU; posts that need to be moved; duplicate posts, etc. Use the "Optional Reason" field to draw their attention to the specific issue you are concerned with.

Just Wondering....Report this Post?

Hello,
Just today, I noticed below everyone's post, there is 'Report This Post' button.
What is that for?
Silly question, but I was just wondering.
Thanks.
C h r i s t o p h

Hi Christoph *
The report this post button is for reporting inappropriate content or posts that violate the ToU (http://discussions.apple.com/help.jspa).
You are seeing this because you have reached level 2 on these forums (more info about levels in ToU documentation). You are now also able to post in the User tips library (http://discussions.apple.com/forum.jspa?forumID=599)
J.C
Message was edited by: J.C

"Report this post" has disappeared just when I need it

I think the moderators should take a look at this - this guy's threads seem to start of sensibly enough before deteriorating into paranoia.
AK

Not all people have lost the button.
However, you have posted to the right location if you felt a thread required reporting.
Austin,
I don't think your thread needs reporting so much as someone to clarify that what has happened is not a hack, but rather a misunderstanding of how network updates can fail. It is possible they have a bad router, or a bad routing software that doesn't work with their system, or both have decided to turn on a routing setting that blocks software update, or they have an internet service provider that has blocked the right port.
It would seem one poster jumped to conclusions, and the other is just not able to post as frequently as the other would desire.

"Report this post" still for level4/where are "points"?

a privilege of level4 was to report the "abuse" of the forum; that option is still availabe only for level4 gurus.. but we don't have anymore any levels... (??)
in term of use, I do read an explination of "points", but MyProfile doesn't display any such "points"....
that is a kind of inconsistency, isn't it...?

Hi Tom,
thanks for your profound statement...- but... (<<in the iM's forums I'm well known for my buts... single t):
software has to fullfill many standards; at first that of the IT dept, who has to handle it on a daily/minute basis... but there's another group of followers: the users (user alarm!!)... I studied a long time ago "communications" (whatever that means).... so, my dimensions are not server-load, perfomance, bandwidth etc, but usability, simplicity, content, et al.
my O.P. concernd the point/level thing... I complained the lost of level-indicators, because I'm used to use them as quality indicators; that's why I wrote never change..., because changing something, I experienced as reliable & good is just "allowed" by something "better"... which I haven't found yet, even more, the level systems still works in some "stealth mode", isn't transparent for the average user as me......
your statement/background info touches the p.o.v. of an engineer... who has to hold a system stable with 100k of users, 24/d, with zillions of posts... chapéau for that!.... my Qs is from the the other side's p.o.v....
that's no critic against you, Tom, .. I just hoped for some "commend about future products"....

Report a post

How do you report a post (actually there are 5 of them just the same):
http://discussions.apple.com/thread.jspa?threadID=1190029&tstart=0
I guess Apple Discussions server did not update properly lately because I still do not have the "report this post" link .....
Then someone else can report it instead.
So this ends up being a request more than a question....

Hardy Geer wrote:
It is more than a moronic joke. He is trying to get some illegal cash.
Not necessarily. Do not assume anything in the post or the user profile is accurate. The perpetrator may be targeting someone by masquerading as him, or simply trying to get a nice list of Discussions users email addresses for those irate enough to reply to the one listed in the profile.
Like with all spam, the safest thing to do is report it if possible & otherwise ignore it. If this sort of thing becomes more common, the moderators may have to make changes either to staffing hours or to signup procedures or something, but it is their concern & not ours.

Someone with enough points to report a post

can someone with enough points please report this post
https://discussions.apple.com/message/16308484#16308484

David, thanks for being so vigilant, but don't worry, there are many people who read the forums and action posts, and the moderators have automated systems for detecting problem posts also. So just enjoy the forum

Which level acquires 'report a post' capability.

I'm just curious as I have read posts in the last couple of months where level 2 was mentioned by both a moderator and an Apple employee in this group as the required level.
However, I have also read on another post that it is level 3:
http://discussions.apple.com/thread.jspa?messageID=12048636&#12048636
I just reached level 2 and do not see the 'report a post' link. Is there something I need to do, will it come in time, or do I really need to reach level 3?

Unless it has been changed recently, my understanding is that Level 2 is required to see a "Report this post" link. You also need to be logged in. Here's an example of where it's located — click to enlarge:

HT4461 I recently downloaded an app from App Store which is a paid app and it doesn't have any features as in the description in the App Store. How do I report this app and stop payment what I did online to purchase it.

I recently downloaded an app from App Store which is a paid app and it doesn't have any features as in the description in the App Store. How do I report this app and stop payment what I did online to purchase it.

Hi Sajeed.f,
This article has the steps to go through to file such a report:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers!
- Ari

Newby question: I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site...

Hi,
I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site.
I am using a trial right now, so I am not sure if I have all the necessary licences, but I am really new to this subject so a link to msdn page or blog item might already do the trick.
This is what I have right now:
https://www.youtube.com/watch?v=rV2_m4iWxSE
Thanks

No that is not currently available.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Active "Report Service Integration Feature" failed

Hi Expert,
I tried to reactive the "Report Service Integration Feature" from "Deactivate", but failed. system show
The content type with Id 0x010100C3676CDFA2F24E1D949A8BF2B06F6B8B defined in feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0} was found in the current site collection or in a subsite.
Please let me know how to fix it.
James Liang

One thing you could try is (re)installing the SSRS 2014 addin on your SharePoint server(s).
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable

trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'

tiburon77 wrote:
trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Report using the feature of opening Excel in SAP.

We are building a custom report using the feature of opening Excel in SAP.
We need to do things like:
Protect the worksheet, but leave some rows unprotected
Freeze the windows
Have any one ever used this feature before? Can any know how to do this?
Thank you,
PV

No, no extra somewhere. What it actually is, is that you are calling the methods of the application(sort of). Here is an example application which does to the freeze panes.
report zrich_0001.
include ole2incl.
data: e_sheet type ole2_object.
data: e_appl type ole2_object.
data: e_work type ole2_object.
data: e_col1 type ole2_object.
data: e_col2 type ole2_object.
data: e_cols type ole2_object.
data: e_cell type ole2_object.
data: e_wind type ole2_object.
data: field_value(30) type c.
parameters: p_file type localfile default 'C:RichTest.xls'.
start-of-selection.
* Start the application
create object e_appl 'EXCEL.APPLICATION'.
set property of e_appl 'VISIBLE' = 1.
* Open the file
call method of e_appl 'WORKBOOKS' = e_work.
call method of e_work 'OPEN'
          exporting
               #1 = p_file.
* Write data to the excel file
do 20 times.
* Create the value
    field_value = sy-index.
    shift field_value left deleting leading space.
    concatenate 'Cell' field_value into field_value separated by space.
* Position to specific cell in Column 1
    call method of e_appl 'Cells' = e_cell
           exporting
                #1 = sy-index
                #2 = 1.
* Set the value
    set property of e_cell 'Value' = field_value .
* Position to specific cell in Column 2
    call method of e_appl 'Cells' = e_cell
           exporting
                #1 = sy-index
                #2 = 2.
* Set the value
    set property of e_cell 'Value' = field_value .
* Position to specific cell in Column 3
    call method of e_appl 'Cells' = e_cell
           exporting
                #1 = sy-index
                #2 = 3.
* Set the value
    set property of e_cell 'Value' = field_value .
enddo.
call method of e_appl 'Columns' = e_col1
         exporting
              #1 = 1.
call method of e_appl 'Columns' = e_col2
          exporting
              #1 = 2.
call method of e_appl 'Range' = e_cols
          exporting
            #1 = e_col1
            #2 = e_col2.
call method of e_cols 'Select' .
get property of e_appl 'ActiveWindow' = e_wind.
set property of e_wind 'FreezePanes' = 1.
** Close the file
* call method of e_work 'close'.
** Quit the file
* call method of e_appl 'QUIT'.
* free object e_appl.
Regards,
Rich Heilman

"Report this post" feature

Similar Messages

Maybe you are looking for