Report to Check material attach in CJR2 (detail planning)

Hi All,
Is there any report to show which material that i already input in CJr2 (detail planning)
Step 1. CjR2
       2. choose layout 1-701 CE planning
       3. Input WBS and CE
       4. Go to edit and detail planning
       5. Input material no dan plant , quantity, when it save it goes to the total value. But i could not find report to show material that was assigned.
Plz advice.
Cheers,
Nies

Hi Sreenivas,
I go to CJR2
Then I put WBS element : let say ABCD
Cost element : 630600
Then I select august and go to Edit - detail planning
I choose item category M and put material number and qty
then save it and post
After that i try to use standard report S_ALR_87013532 ..its only show the plan cost.
I wish there is standard report to check which material has been assigned in the WBS and CE.
Cheers,
Nies

Similar Messages

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Display Material |Attachment File in ALV report

Dear All,
I have to make ALV report for mutliple material attachment file.I want to display material wise attachment where user can see in report. We can see attachment list in Service For Object button in MM03 tcode for single material. And i also i do not want attachement list on tool bar where like MM03 is dispalying.
I need ALV report for materialcodewise image/attachment file like,
MaterialCode    File
A101                any filename
B101                 any filename
So user can click on file base on material, then file will open and he can see image/attachment.
Please guide me for above mentioned query.
Regards,
Shivam.

Dear Shivam,
You can have multiple attachments for a sinlge material. You need to consider that in your report.
for getting the list of attachments using the static method CL_BINARY_RELATION=>READ_LINKS.
DATA: lw_BOR TYPE sibflporb.
DATA: lt_rel TYPE OBL_T_RELT,
             lw_rel type OBL_S_RELT.
DATA: lt_links TYPE obl_t_link,
             lw_links type OBL_S_LINK.
DATA: lo_root TYPE REF TO cx_root.
lw_bor-instid = <Materail no.>   "<------- Materail No.
lw_bor-typeid = 'BUS1001006'.
lw_bor-catid = 'BO'.
lw_rel-sign = 'I'.
lw_rel-option = 'EQ'.
lw_rel-low = 'ATTA'.           "<----------Attachments
APPEND lw_relt TO lt_rel.
TRY.
      CALL METHOD cl_binary_relation=>read_links
        EXPORTING
          is_object           = lw_bor
          it_relation_options = lt_rel
        IMPORTING
          et_links            = lt_links.
    CATCH cx_root INTO lo_root.
ENDTRY.
Once you get the list of attachment populate your output table using the same.
you can use FM SO_OBJECT_READ to get details of attachment.
Make the column with attachment as hotspot, so that ALV take action in sinlge user click.
In the user-command of ALV write the code to open the attachment.
you can use the FM SO_DOCUMENTS_MANAGER
Hope this helps you.
Regards,
Sachinkumar Mehta

Requirement to develop New report to display material self life details

Hi,
I have a requiement to develop a report to find material Expiry date susing total self life:
My selection screen:
warehouse number
storage location
storage type
material
material type
total shelf life
My list should display the material number, description,material type, material group, storage unit, total stock, goods receipt date, expiry date.
Please tell me what are the table to be used to fetch these details.
Thanks,

Hi,
For your requirement use the below Table,
material number : MARD-MATNR
description : MAKT-MAKTX
material type : MMARA-MATKL
storage unit - MARD-LGORT
Total stock - MARD-LABST
goods receipt date MSEG -DATE
expiry date MSEG - DATE
Regards
Thiru

Report to check Po o/p processing status & details

Dear experts ,
Is there a standard SAP report that give me the details of a PO o/p type processing status with details ?
Regards
Anis

Dear Jurgen ,
Thx for the update , but ME9F is an executable report , also it doesnt have the message details in the o/p screen . I wanted an information report for end user that would just tell him if the output exitsis & if yes what is its status & other details .
Regards
Anis

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

How to get Material attached to a change number

Hi All,
I have change number with me. I need to know lab/office field of the material attached to that change number.
Can anybody suggest me how to get it?
Thanks in advance.

hi ,
This thig u want in report or sap script .
if in report u make it through program and join with that field using for all entries .
if in smartforms then check it in DDIC list and specify if not available then through program u call that fields.
in script through program u can do that.
Regards,
Subash chandra Sahoo.

Storage For Material Attachment File

Dear All,
I have to make ALV report for material attachment file.I want to display material wise attachment where user can see in report. I can see attachment list in Service For Object button in MM03 tcode. I had tried to find out any table for the same but is not found.But where it is store image respective to material code.
Please guide me for above mentioned query.
Regards,
Shivam.

Hi Shivam ,
i think you need to display those links in ALV right or
whole attachement as a icon in ALV ....how this can be possible ?
anyhow ..you can use check these FMs
CL_ALINK_CONNECTION
CL_BINARY_RELATION
regards
Prabhu

Report on raw material to wip for a production order

Hi,
Is there a report which has a list of " issue of raw materials to a production order"?
Or how to know how much raw material is issued to WIP on a production order.
i nee dto have a report which has material cost and material overhead an dtotal.
how to build this report ?
Thanks,
Sai.

Hi Sai,
You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
Then proceed. Click on the icon DETAIL LIST.
Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
You should see the total issuances to per material.
I hope this helps.
Heinrick Palad

MB5L Report Discrepacy for Material and Stock Account Currency

I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

Hi,
Here's some information from help. Variances can occur for the following reasons:
You have entered postings to the stock account manually.
The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
Check Account Determination - OMWB
The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
Cheers !

One report to check WBS and Asset number

Hi All,
Please advice. Is there any report to check WBS and asset number belong to ?
Many thanks in advance.
Nies

Please let me know your exact requirement.
But KOSRLIST_PR will show (if you have valid entries) the settlement receiver something like below with WBS element information and settlement details:
WBS ISC/00002-1-02 RECEIVER WBS2-COMP 1000
FXA 1000/700000132/0 RECEIVER WBS2-COMP 1000 100.00 AUC Act
Regards
Sreenivas

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Material Attachment date

When the project is being created in CJ20 materials are attached.
Is there any possibility we can get the material attachment date from administration point of view User name and Date.
regards,
Amlan Sarkar

Hi,
In Matertial Detail screen you can see the required information in assignment tab.
Thanks
Saikishore.Ganga

Material Attachment repository

All
Our customer would like to have material attachment added to one of thier material reports, they want to be able to click on an icon/link and see the attachment of the material. so I want to know where the material attachments are stored, Is there a repository for these files?
Regards
Sly

Hi,
You need to implement SAP DMS (Document management system) for the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30bba04a-0114-2d10-6696-9898522c97df?quicklink=index&overridelayout=true
Regards,
Sandesh Sawant

Reports to check the settled costs/revenues

Hi All,
Can you please suggust me some reports to check settled costs/revenues with sender and reciver details.
Muzamil

Hi,
Try this:
Tcode CJ13, Input the fields.
Execute amd hit F7, Now hit Shift+F7.
This screen will take you to the settlement hierarchy screen.
Hoope its useful.
Reward point if useful. Revert back if any other issue.
Thanks..

Report to Check material attach in CJR2 (detail planning)

Similar Messages

Maybe you are looking for