Report to check the WBS "system status"

Hello friends,
Would anyone know for a standard report where I can check for the WBS "system status"?
i.e.: I want to know everything I have in AVAC status
Thanks and Regards
Alex

You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
System will display you user / system status for all the PS Objects.
With Regards
Nitin P.

Similar Messages

Standard Report, for checking the PR approval status by a certain User

Hello Experts,
                      Is there any standard report in the SAP where we can find out for the given managers, if level 1 approver is Mr. X, then which all has been approved by Mr. X and and pending with subsequent approvers?
Please help.
thanks and regards,
Yawar Khan

Hi,
Yes, standard report is available for PR approval status list using T-code ME5A - List Display of Purchase Requisitions and the following input data's are given .
Purchasing Group                  :    ___
Scope of List                         : ALV
Plant                                       : _____ (if required)
- Assigned Purchase Requisitions to be ticked.
- Released Requisition Only to be ticked.
- Requisition for overall Release to be ticked.
- Requisition for Item-wise Release to be ticked.
Now execute the report and then report top layout button click for 'Release indicator' option selected for released status confirmation purpose. If release indicator status is 'X' means PR released, otherwise PR is not released.
Hope, it is useful for you.
Regards,
K.Rajendran

Report to check Standard WBS link to which standard network and activity

Dear All,
Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
Thank you.
Nies

Hi,
Please try this:
1. Tcode : CN41
2. Change database profile: In that in the origin check mark the Standard structure. Continue..
3. At the bottom of the selection screen check mark the standard structures.
4. In the selction area for the Project hit F4 and select the project based on the standard WBS Element.
5. Exceute the report.
Hope this is useful.
Reward points if found useful.
thanks..

Where we check the Project closing status?T.code for List of Closing Projec

Dear Guru's,
Where can we check the Project closing status? Can we change the closing status if want to do some modification, and what is the transaction code that we to view the list of closing project.
Regards,
Kalyan

1.You can find the project status ( all the status ) in any project maintenance transaction for ex. Run Cj20n > Open you project> on the basic data tab you will find the project status.
( If you want to see the status of other PS oject than click on that object, similarly you will get the status of that object on Basic data tab. )
2.Yes you can change the closing status of proejct for midification. path is clickon the object for which you want to change the closed object > Edit> Status--> Close --> Undo.
3.For the list of Project status go to CN41
on the projectno. input line click on multiple selection--> give the proejct no. list for which you wanted to see the status. -->enter --> Excute.
Report will open in screen. in that report go to toolbar and click on 'choose filed' button.(F5) -->one pop up window will open -->right handside scroll down in that window >select 'status' field and move it to left side>enter
project status will be shown against you project list. you can verify the same in maintenance txn.
If you have activated user status the same will also get populated.
You can downlaod the same in Excle file path is : Evaluation menu>export>save to file. ( via filtering in Excle you call do all the analysis realted to project status how amny are in clised status etc. )
Regards
Nitin

Use of dynpro services is not possible in the current system status

Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

BADI CRM_MKTPL and Status Change button! (Hide the standard system status)

Hello,
In transaction CRM_MKTPL, i need to delete some status that appears when i click on button Change status.
I am trying to use the BADI: CRM_MKTPL using the method 'GET_DROPDOWNBOX_VALUE', but i didn't get what i
want because this method is only valid (i think) for Listboxes for a field and not for a button, that is my
requirement.
Also i am trying to use the method 'p_fill_dropdown_listbox', but i don't know how to use this, and where, in
whick part of the BADI CRM_MKTPL.
I want to hide the standard system status in the dropdown list.
Any ideas?
Thanks in advance
Best regards
Message was edited by:
yukimai maio

just check in your badi there is any option is there for menu area customization or not in the implementation you can find attribute,interface ,subscreen like tab there check any menu area tab is there or not.. if it is not there then try for any menu exit and lastly you can try for transaction variant tcode SHD0.
regards
shiba dutta

What does mean the error "System status DELT is active"?

Hi Gurus,
Can somebody tell me what does mean the error "System status DELT is active"?

Hi Disha,
I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
When I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
Any help on this is highly appreciated.
Regards
Surender

,i want to update the item system status of the CONTRACT (va42) to TECO

Hi,
here my requirement is that ,i want to update the item system status of the CONTRACT (va42) to TECO
Which function module i have to use for this.
I have checked the bapi BAPI_CUSTOMERCONTRACT_CHANGE .
But i cant find any field related to system status update.
can any one advice me how i can i solve this
thanks in advance.

I got one function module for this.

Report to check the stock transfer through 303 mvt type

Hi,
I understand that the stock transfer can be done through two ways
1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

hello
for this you can use MB51 only. same report you can give the movement types as 313 & 315.
Laxman

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

T code to check the job run status

Hi Gurus,
I am filling the setup tables for inventory, but i didn't run in background. I clicked on execute button, but suddenly i got disconnected from net and my server also.
Now i have to check the job run status whether it is running or not.
Request you to provide the suggessions.
Thanks & Regards,
Saketh

Hi,
if you ran job in background you can see at SM37.use proper time ,date and use id to get your job.
if you ran on frond end then you won't see job.if your job was completed then you can see data at SE11 by using setup table name or you can see at t code NPRT by using name of the run.
if you won't find your job then just delete your setup tables again and fill it.
No issues.
Thanks

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Is there standard report to get the WBS by using asset number

Dear All,
Please advice, is there any standard report to get the WBS by using asset number ?
Thank you.
Nies

We can get WBS report by using costcenter - S_ALR_87011966

Report to check the WBS "system status"

Similar Messages

Maybe you are looking for