Report to display EPC's in URN format
Hello,
I am new to AII and I have a request which is stated below. can someone let know if this is possible and if so, could give me some information to get started on this. maybe if there are some tables, or FM's or BAPI's that would have this information.
The first screen is the Observation Search Screen. After clicking on an observation, you can drill into the contents by selecting view action objects. The EPC from the shipping container is displayed (as a header) in the EPCu2019s URN format. Iu2019d like to get a query or report that can display all of the observed EPCs (the header information) in the URN format.
Would this be possible? If there is anything else that I can provide, please advise.
thanks...
Yes this is very much possible. We have done a similar assignment for a pharma client using FM /AIN/DM_OBJECT_READ_BY_URN and with tables /AIN/DM_OBJECT & /AIN/DM_OBJ_ID. I cant write you all the code but yes it is very much possible.
Thanks,
Naveen
Similar Messages
-
Generate XML report then display like HTML with specified formate
Hello,friends
I want to generate XML report then use XSL to parse it,report will display like HTML with specified formate like attachment,any ideas?
Thank you
AlbHi Ray,
I don't why I can not upload any format picture,so I listed the display as below:
Test Result Company Logo
SN 1111 User Operator
Status Fail Factory SE
Product xxx Tester xxx
Start time xxx Line xxx
Test time xxx
NAME STATUS VALUE LOW HIGH RULE
1.0 Pass/Fail Test Passed True True EQ
2.0 Less than Test Failed 15 10 LT
3.0 String Value Test Passed A string from the limit file A string
End of Report
Could you give me some suggestions?
Thanks a lot
Alb -
Report Title Displaying in Multiple Lines on PDF Format when i Print in PDF
Report Title Displaying in Multiple Lines on PDF Format when i tried to print in PDF Format, is there any limit for Report Title Characters
Displaying Like -
LRDP
Open
Label
Paradigm
Forecast
Report
Any Info Appreciated
~SrixGot It .. Just need to chnage the Width Parameter.......!
-
How can i display page number in this format in xml publisher report (1-1)
in this format
1-1
1-2
1-3
2-1
2-2
2-3
can i display page nos in this format in xml publisher please help me on thisHi,
Use the SET COUNTRY..
SET COUNTRY 'US'.
write: / sy-datum.
SET COUNTRY 'IN'.
write: / sy-datum.
Thanks,
Naren -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
Report to display PO details and download details in an excel fil
Hi,
I have been asked to develop a report for "Develop report to display PO details and download details in an excel file".
Could any one guide me technically what are the different tables i need to take to generate the report. Treat this is very urgent. Pls provide sample code too....
Thanks in advance....Purchase Order PO
Tcode for creation ME21,ME22,ME23. tables EKKO,EKPO.
refer this program
REPORT ZPOCHANGE.
This is a subroutine perform in the Purchase order Layout sets.
Description : To retreive the details of changed remarks in PO output and to capture the retrival date
Additional features with the previous changed appearing. e.g. from .... to
Note : If the latest modification details required
Please Uncomment the lines mentioned under 'Last Modified Remarks only'
Information
/: PERFORM CHDATE IN PROGRAM ZPOCHANGE
/: USING &EKKO-EBELN&
/: CHANGING &RVDATE2&
/: ENDPERFORM.
/: IF &RVDATE2& EQ ' '.
/ Revision Date: NIL
/: ELSE.
/ Revision Date: &RVDATE2&
/: ENDIF.
Main Window
/E CHANGE_REMARKS
/: PERFORM CHDET IN PROGRAM ZPOCHANGE
/: USING &EKPO-EBELP&
/: USING &EKKO-EBELN&
/: USING &T166T-CHTXT&
/: USING &T166T-CTXNR&
/: CHANGING &ITAB1-F_NEW&
/: CHANGING &ITAB1-F_OLD&
/:ENDPERFORM.
/:IF &ITAB1-F_NEW& NE ' '
= &ITAB1-F_OLD(C)& CHANGED TO &ITAB1-F_NEW(C)&
/:ENDIF
You might need to apply Note 373524 - Message determination and printing
TABLES : CDSHW , "Change documents, formatting table
CDHDR , "Change document header
EKPO , "Purchasing Document Item
EKKO , "Purchasing Document Header
T166C . "Print-Relevant Purchasing Document Changes
DATA : ITAB1 LIKE CDSHW OCCURS 100 WITH HEADER LINE.
DATA : ITAB2 LIKE EKPO OCCURS 100 WITH HEADER LINE.
DATA : DOCUM LIKE EKKO OCCURS 100 WITH HEADER LINE.
DATA : TABKEY LIKE CDSHW-TABKEY.
data : begin of ctab occurs 10,
tname like t166c-tname,
fname like t166c-fname,
TABKEY LIKE CDSHW-TABKEY,
FLAG(3),
end of ctab.
DATA : VAL1(15), VAL2(15).
DATA : M1(20), M2(10), M3(10),M4(5).
DATA : RVDATE(10),RVDATE2(10) , EBELN LIKE EKKO-EBELN, COUNT TYPE I.
Text number for change text(CTXNR), CHANGE TEXT(CHTXT), Purchase order
Number and item number are passed from Layoutset
FORM CHDET *
--> ITAB *
--> OTAB *
FORM CHDET TABLES ITAB STRUCTURE ITCSY
OTAB STRUCTURE ITCSY.
LOOP AT ITAB.
CASE ITAB-NAME.
WHEN 'T166T-CHTXT'.
MOVE ITAB-VALUE TO M1.
WHEN 'T166T-CTXNR'.
MOVE ITAB-VALUE TO M2.
WHEN 'EKKO-EBELN'.
MOVE ITAB-VALUE TO M3.
WHEN 'EKPO-EBELP'.
MOVE ITAB-VALUE TO M4.
ENDCASE.
ENDLOOP.
Throught this function change details are retrived into itab1.
CALL FUNCTION 'ME_CHANGES_READ'
EXPORTING
DOCUMENT_CATEGORY = 'F'
DOCUMENT_NUMBER = M3
TABLES
XCDSHW = itab1.
SELECT SINGLE * FROM T166C WHERE CTXNR = M2.
IF SY-SUBRC = 0.
CONCATENATE M3 M4 INTO TABKEY.
********Last Modified Remarks only**********************
read table ctab with key tname = T166C-TNAME
tabkey = tabkey
fname = T166C-FNAME.
if sy-subrc ne 0.
LOOP AT ITAB1 WHERE TABNAME = T166C-TNAME
AND TABKEY+3(15) = TABKEY
AND FNAME = T166C-FNAME.
*********Last Modified Remarks only**********************
ctab-tname = t166c-tname.
ctab-fname = t166c-fname.
ctab-tabkey = tabkey.
append ctab.
delete itab1.
exit.
endloop.
Captured details are exported to Layoutset
LOOP AT OTAB.
CASE OTAB-NAME.
WHEN 'ITAB1-F_OLD'.
OTAB-VALUE = ITAB1-F_OLD.
MODIFY OTAB.
CLEAR : ITAB1-F_OLD.
WHEN 'ITAB1-F_NEW'.
OTAB-VALUE = ITAB1-F_NEW.
MODIFY OTAB.
CLEAR : ITAB1-F_NEW.
ENDCASE.
endloop.
endif.
******Last Modified Remarks only****************
ENDIF.
clear ctab.
ENDFORM.
FORM CHDATE *
--> ITAB *
--> OTAB *
Form for revision date retrival. PO no. is passed from layoutset
and in the change document header latest modified date is captured
and passed to revision date field in Layoutset.
FORM CHDATE TABLES ITAB STRUCTURE ITCSY
OTAB STRUCTURE ITCSY.
CLEAR : RVDATE, EBELN.
LOOP AT ITAB.
CASE ITAB-NAME.
WHEN 'EKKO-EBELN'.
MOVE ITAB-VALUE TO EBELN.
ENDCASE.
ENDLOOP.
SELECT UDATE INTO CDHDR-UDATE FROM CDHDR WHERE OBJECTCLAS = 'EINKBELEG'
AND OBJECTID = EBELN.
IF RVDATE < CDHDR-UDATE.
RVDATE = CDHDR-UDATE.
ENDIF.
COUNT = COUNT + 1.
ENDSELECT.
LOOP AT OTAB.
CASE OTAB-NAME.
WHEN 'RVDATE2'.
CONCATENATE RVDATE6(2) '.' RVDATE4(2) '.' RVDATE(4) INTO RVDATE2.
IF COUNT = 1.
RVDATE2 = ''.
ENDIF.
MOVE RVDATE2 TO OTAB-VALUE.
MODIFY OTAB.
ENDCASE.
ENDLOOP.
CLEAR : COUNT.
ENDFORM.
Message was edited by:
Karthikeyan Pandurangan -
Sales Report - The report to display the Sale Dist accor to the Ship to.
Hi Gurus,
We have a report where Sales District is placed under the rows with Variable as Authorization processing type.
The current report is displaying the Sales District with Sold-to of the sale. But now the requirement is for the report to display the sales district according to the ship-to of the sale.
But, we need the sales district reported from the ship-to level.
and The format of the report should not change.
Can any one guide me on the above incident. Points will be awarded.
Regards,
Venkat.This can be done by swithching sales district on the navigational attr of ship-to and use
And using the same in the place of current sales district.
regards,
Naveen.A -
How to generate Inventory Report to display all details at end of mon/yr?
Hi Guys..
I would like to know how we can generate a
Inventory report to display all inventory details at the end of every
month or year?
Also, another question.How can we create a PO past delivery date report?
Any help is appreciated.
Thanks,
Sri Harsha;Hi,
Pls the code here-
TYPES :
BEGIN OF ty_mard,
matnr TYPE matnr,
werks TYPE werks_d,
lgort TYPE lgort_d,
labst TYPE labst,
retme TYPE retme,
umlme TYPE umlme,
END OF ty_mard.
TYPES :
BEGIN OF ty_mska,
matnr TYPE matnr,
kalab TYPE labst,
vbeln TYPE vbeln,
posnr TYPE posnr,
END OF ty_mska.
TYPES :
BEGIN OF ty_vbap,
matnr TYPE matnr,
kwmeng TYPE kwmeng,
pstyv TYPE pstyv,
END OF ty_vbap.
TYPES :
BEGIN OF ty_mbew,
matnr TYPE matnr,
salk3 TYPE salk3,
stprs TYPE stprs,
END OF ty_mbew.
TYPES :
BEGIN OF ty_mchb,
matnr TYPE matnr,
charg TYPE charg_d,
END OF ty_mchb.
TYPES :
BEGIN OF ty_mara,
matnr TYPE matnr,
mfrpn TYPE mfrpn,
END OF ty_mara.
TYPES :
BEGIN OF ty_makt,
matnr TYPE matnr,
maktx TYPE maktx,
END OF ty_makt.
TYPES :
BEGIN OF ty_ekpo,
matnr TYPE matnr,
netpr TYPE bprei,
meins TYPE bstme,
END OF ty_ekpo.
DATA :
BEGIN OF final OCCURS 0,
matnr LIKE mard-matnr,
maktx LIKE makt-maktx,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
mfrpn LIKE mara-mfrpn,
usp LIKE mbew-stprs,
labst LIKE mard-labst,
salk3 LIKE mbew-salk3,
kalab LIKE mska-kalab,
vbeln LIKE mska-vbeln,
sov LIKE ekpo-netpr,
uom LIKE ekpo-meins,
posnr LIKE mska-posnr,
pstyv LIKE vbap-pstyv,
kwmeng LIKE vbap-kwmeng,
retme LIKE mard-retme,
umlme LIKE mard-umlme,
END OF final.
DATA :
BEGIN OF itab OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
labst LIKE mard-labst,
retme LIKE mard-retme,
umlme LIKE mard-umlme,
charg LIKE mchb-charg,
END OF itab.
DATA :
i_mard TYPE STANDARD TABLE OF ty_mard,
i_mbew TYPE STANDARD TABLE OF ty_mbew,
i_mchb TYPE STANDARD TABLE OF ty_mchb,
i_mara TYPE STANDARD TABLE OF ty_mara,
i_vbap TYPE STANDARD TABLE OF ty_vbap,
i_mska TYPE STANDARD TABLE OF ty_mska,
i_makt TYPE STANDARD TABLE OF ty_makt,
i_ekpo TYPE STANDARD TABLE OF ty_ekpo.
DATA :
wa_mard TYPE ty_mard,
wa_mbew TYPE ty_mbew,
wa_mchb TYPE ty_mchb,
wa_mara TYPE ty_mara,
wa_vbap TYPE ty_vbap,
wa_mska TYPE ty_mska,
wa_makt TYPE ty_makt,
wa_ekpo TYPE ty_ekpo.
DATA :
sov_total TYPE currency,
urestrict_total type currency.
*Select options:
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR gf_matnr, " Material No.
s_werks FOR gf_werks, " Plant
s_lgort FOR gf_lgort, " Storage Location
s_charg FOR gf_charg. " Batch No.
SELECTION-SCREEN END OF BLOCK a.
*Validation of Selection Fields
AT SELECTION-SCREEN.
IF s_matnr IS INITIAL
AND s_werks IS INITIAL
AND s_lgort IS INITIAL
AND s_charg IS INITIAL.
MESSAGE e001(zcir).
ENDIF.
*Function Module for Checking the inputs
CALL FUNCTION 'MMIM_ENTRYCHECK_MAIN'
TABLES
it_matnr = s_matnr
it_werks = s_werks
it_lgort = s_lgort.
*Checking of input values for S_CHARG
IF NOT s_charg-low IS INITIAL OR NOT s_charg-high IS INITIAL.
SELECT charg FROM mchb into table LT_charg WHERE charg IN s_charg.
IF sy-subrc NE 0.
MESSAGE e002(zcir).
ENDIF.
clear wa_mchb.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR COL_HEADING.
WRITE sy-uline(105).
WRITE :/ '|',2 text-101, "MATERIAL NO:
16 text-102, "MATERIAL DESCRIPTION
52 text-103, "PLANT
60 text-104, "STORAGE LOCATION.
74 text-105, "MANUFACTURE PARTNER NO.
88 text-106, "VALUATED STOCK.
95 text-107. "STANDARD PRICE.
105 '|'.
FORMAT COLOR COL_GROUP.
WRITE :/ '|',2 text-108, " UNRESTRCTED STOCK
16 text-109, " SALES DOCUMENT NO:
20 text-110, " ITEM NO:
27 text-111, " UNIT
32 text-112, " NET VALUE
39 text-113, " ITEM CATEGRY
50 text-114, " QUANTITY
60 text-115, " BLOCKED STOCK
79 text-116, " TOTAL STOCK
95 text-117. " STOCK TRANSFER
87 '|'.
FORMAT COLOR OFF.
WRITE sy-uline(105).
*START OF SELECTION
START-OF-SELECTION.
IF NOT s_matnr IS INITIAL
OR NOT s_werks IS INITIAL
OR NOT s_lgort IS INITIAL.
PERFORM select1.
ELSEIF NOT s_charg IS INITIAL.
PERFORM select2.
ELSEIF NOT s_matnr IS INITIAL
OR NOT s_werks IS INITIAL
OR NOT s_lgort IS INITIAL
AND NOT s_charg IS INITIAL.
PERFORM select3.
ENDIF.
PERFORM final1.
PERFORM collect.
*END OF SELECTION
END-OF-SELECTION.
LOOP AT LT_FINAL.
FORMAT COLOR COL_KEY.
WRITE :/2 LT_FINAL-matnr,
14 LT_FINAL-maktx,
52 LT_FINAL-werks,
58 LT_FINAL-lgort,
69 LT_FINAL-mfrpn,
73 LT_FINAL-labst,
87 LT_FINAL-usp.
FORMAT COLOR OFF.
FORMAT COLOR COL_NORMAL.
WRITE :/2 LT_FINAL-kalab,
14 LT_FINAL-vbeln,
17 LT_FINAL-posnr,
24 LT_FINAL-uom,
28 LT_FINAL-sov,
36 LT_FINAL-pstyv,
46 LT_FINAL-kwmeng,
57 LT_FINAL-retme,
65 LT_FINAL-salk3,
75 LT_FINAL-umlme.
ENDLOOP.
FORMAT COLOR COL_TOTAL.
WRITE :/2 text-119, " TOTAL VALUE
28 V_sov_total,
87 V_urestrict_total.
FORMAT COLOR OFF.
Form Name: select1
text: Population of internal table LT_MARD and using LT_MARD populating
the internal table LT_MCHB
FORM select1.
SELECT matnr
werks
lgort
labst
retme
umlme
FROM mard
INTO TABLE LT_mard
WHERE matnr IN s_matnr
AND werks IN s_werks
AND lgort IN s_lgort.
SELECT matnr
charg
FROM mchb
INTO TABLE LT_mchb
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
ENDFORM. "select1
Form Name: select2
text:Population of internal table LT_MCHB and using LT_MCHB populating
LT_MARD
FORM select2.
SELECT matnr
charg
FROM mchb
INTO TABLE LT_mchb
WHERE charg IN s_charg.
SELECT matnr
werks
lgort
labst
retme
umlme
FROM mard
INTO TABLE LT_mard
FOR ALL ENTRIES IN LT_mchb
WHERE matnr EQ LT_mchb-matnr.
ENDFORM. "select2
Form Name: select3
text: Population of internal table LT_TAB using inner join and then
populating internal tables LT_MARD and LT_MCHB
FORM select3.
SELECT a~matnr
a~werks
a~lgort
a~labst
a~retme
a~umlme
b~charg
INTO CORRESPONDING FIELDS OF TABLE LT_TAB
FROM mard AS a
INNER JOIN mchb AS b ON bmatnr = amatnr
WHERE a~matnr IN s_matnr
OR a~werks IN s_werks
OR a~lgort IN s_lgort
AND b~charg IN s_charg.
LOOP AT LT_TAB.
MOVE: LT_TAB-matnr TO wa_mard-matnr,
LT_TAB-werks TO wa_mard-werks,
LT_TAB-lgort TO wa_mard-lgort,
LT_TAB-labst TO wa_mard-labst,
LT_TAB-retme TO wa_mard-retme,
LT_TAB-umlme TO wa_mard-umlme,
LT_TAB-matnr TO wa_mchb-matnr,
LT_TAB-charg TO wa_mchb-charg.
APPEND wa_mard TO LT_mard.
APPEND wa_mchb TO LT_mchb.
ENDLOOP.
ENDFORM. "select3
Form Name:collect
text:population of LT_FINAL internal table-LT_FINAL using other internal
tables
FORM collect.
LOOP AT LT_mard INTO wa_mard.
MOVE : wa_mard-matnr TO LT_FINAL-matnr,
wa_mard-werks TO LT_FINAL-werks,
wa_mard-lgort TO LT_FINAL-lgort,
wa_mard-labst TO LT_FINAL-labst,
wa_mard-retme TO LT_FINAL-retme,
wa_mard-umlme TO LT_FINAL-umlme.
READ TABLE LT_makt INTO wa_makt WITH KEY matnr = wa_mard-matnr.
MOVE wa_makt-maktx TO LT_FINAL-maktx.
READ TABLE LT_mska INTO wa_mska WITH KEY matnr = wa_mard-matnr.
MOVE: wa_mska-kalab TO LT_FINAL-kalab,
wa_mska-vbeln TO LT_FINAL-vbeln,
wa_mska-posnr TO LT_FINAL-posnr.
READ TABLE LT_vbap INTO wa_vbap WITH KEY matnr = wa_mard-matnr.
MOVE: wa_vbap-kwmeng TO LT_FINAL-kwmeng.
READ TABLE LT_mara INTO wa_mara WITH KEY matnr = wa_mard-matnr.
MOVE : wa_mara-mfrpn TO LT_FINAL-mfrpn.
READ TABLE LT_mbew INTO wa_mbew WITH KEY matnr = wa_mard-matnr.
Calculation of Unrestricted value
LT_FINAL-usp = wa_mard-labst * wa_mbew-stprs.
V_urestrict_total = V_urestrict_total + ( wa_mard-labst * wa_mbew-stprs ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = V_urestrict_total
IMPORTING
OUTPUT = V_urestrict_total
MOVE wa_mbew-salk3 TO LT_FINAL-salk3.
READ TABLE LT_ekpo INTO wa_ekpo WITH KEY matnr = wa_mard-matnr.
MOVE wa_ekpo-meins TO LT_FINAL-uom.
Calculation of Sales Order Value
LT_FINAL-sov = wa_mska-kalab * wa_ekpo-netpr.
V_sov_total = V_sov_total + ( wa_mska-kalab * wa_ekpo-netpr ).
APPEND LT_FINAL.
ENDLOOP.
ENDFORM. "collect
*Form Name:FINAL1
*Population of all the internal tables
FORM FINAL1.
SELECT matnr
kalab
vbeln
posnr
FROM mska
INTO TABLE LT_mska
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
SELECT matnr
kwmeng
pstyv
FROM vbap
INTO TABLE LT_vbap
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
SELECT matnr
salk3
stprs
FROM mbew
INTO TABLE LT_mbew
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
SELECT matnr
mfrpn
FROM mara
INTO TABLE LT_mara
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
SELECT matnr
maktx
FROM makt
INTO TABLE LT_makt
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
SELECT matnr
netpr
FROM ekpo
INTO TABLE LT_ekpo
FOR ALL ENTRIES IN LT_mard
WHERE matnr EQ LT_mard-matnr.
ENDFORM. "final1
Reward if helpful.
Chandralekha -
Use report to display html data
Hi
I have multiple rows of text in a clob field that contains html tags. I want to display this data in html format in my htmldb application. Can I use an htmldb report to do this or am I better off using an item?
Thanksbump...
has anyone a solution to this?
I have a form that allows users to add raw HTML code. Now I want to display the formatted version in a report but the tags show in the report instead...any suggestions?
regards
Paul P -
How to display currency values in indian format
hi all,
When I am displaying Currency values as output , those are displaying in U.S. format (ie.1,234,000.00) , But I need to display those in Indian Rupee format (i.e 12,34,000.00).
Plz any one can help me that how to display this
thank you,
regards
HanumaHi Hanuma kumar, please try this code.
REPORT ZAMOUNT_CONVERSION.
DATA : RESULT1(20).
PARAMETERS : NUM TYPE P DECIMALS 2.
DATA : num2 type STRING.
DATA : col_amt(20) type n,"15
col_b type i,
num_1(20) type C,"15
Length type i.
num_1 = num.
write : 'default format :',num.
uline.
skip.
IF ( num >= 999999999 ).
write num_1 using edit mask 'RR__,__,__,__,______' to col_amt.
CONDENSE col_amt.
length = STRLEN( col_amt ).
if length = 16.
REPLACE first OCCURRENCE OF ',' in col_amt with space.
write :/'amount indian format:',col_amt.
else.
write :/'amount indian format:',col_amt.
endif.
ELSEIF NUM < 999999999 AND NUM >= 9999999.
write num_1 using edit mask 'RR__,__,__,______' to col_amt.
condense col_amt .
length = STRLEN( COL_AMT ).
if length = 13.
REPLACE first OCCURRENCE OF ',' in col_amt with space.
write :/'amount indian format:',col_amt.
else.
write :/'amount indian format:',col_amt.
endif.
ELSEIF NUM < 9999999 AND NUM >= 99999.
write num_1 using edit mask 'RR__,__,______' to col_amt.
condense col_amt .
length = STRLEN( COL_AMT ).
write :/'amount indian format:',col_amt.
ELSEIF NUM < 99999.
data : dumy(10) type c.
dumy = num .
CONDENSE dumy.
length = STRLEN( dumy ).
if length <= 6.
write :/'amount indian format:',num.
else.
write num_1 using edit mask 'RR__,______' to col_amt.
write :/'amount indian format:',col_amt.
endif.
ENDIF.
uline. -
PowerDesigner 16.5 SP02 HTML Report not displaying diagrams in IE8
I am creating an HTML report in PowerDesigner 16.5 SP02 and the diagrams are not displaying in IE8.
I am aware that these are SVG images and that a download/install of SVGViewer would fix this BUT I don't want to have to download something to view the report in IE.
I am also aware that IE11 displays the diagrams but we are using IE8 company wide due to legacy applications that were built on it.
Any suggestions on how to fix this when building the report? Is it possible to change format of the diagrams? I know there is a way in PD Portal but can't seem to find a way to do it in PowerDesigner.
Any help would be appreciated.
Thanks in advance.Hi
1st create the report using the wizard that uses the default image type.
Go to the html source directory and find the image.
Copy and rename it to a jpg / bmp / png etc
Next create a custom template report.
Once you are at the selection criteria - select the Graphic File from the Available items on the left.
Import the graphic image as a .jpg / bmp /png etc
continue selecting reporting options.
once done - save as a new template
Go back to your model and select the newly created reporting template and continue as per normal.
Alternatively
I know this is not the most elegant solution but you could try the following.
1) Go the the directory where the html report files was saved.
2) copy and rename the image file to the desired format i.e .gif / .jpg
3) go to the html link in the report where the image is displayed.
4) right-click the image and select inspect element
5) check what the name of the source .html file is
6) edit the html page and rename the image in the .html file to what you changed it to.
7) save and refresh
hope this helps
regards
JC -
SSRS report not displaying data in correct order
Guys,
I have a SSRS 2012 report not displaying returned records from SQL in the correct order. Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
on the dataset in question, likewise returns the data correctly. Only when I run the actual report does the data display incorrectly(always last name order). I've done similar reporting using very similar stored procedures and I've never had this
problem. Below is the stored procedure. "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL. Wish I could supply screen shots.
Thanks for any help,
Dave
ALTER PROCEDURE [dbo].[RAC_PT_List]
@Level as int,
@SortBy as int,
@PTLName as varchar(30) = NULL,
@User as varchar(10) = NULL
AS
SELECT pat.headerID,
pat.PT_LName + ', ' + pat.PT_FName AS PTName,
pat.PT_AcctNo,
rco.RCO_CLMREF,
rco.RCO_AppealLevel,
rco.RCO_LevelNo,
rco.RCO_AuditorStatus,
let.LET_DEN_DueDate,
CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
let.LET_DEN_Dollars,
let.userID
FROM Master_PT_List pat
INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
AND (rco.RCO_LevelNo = @Level)
AND (let.userID = @User)
--AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
ORDER BY
CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
END
DESC,
CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
END
DESC,
CASE WHEN @SortBy = '3' THEN pat.PT_LName
ENDHi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201 201306
201202 201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advanceDo you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above. -
Reports to display vendor open items by payment methods
Hi Gurus,
Is there any reports to display vendor open items by payment methods?
Thanks iHi,
Use FBl1N or F.41
Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
Regards,
Radhika.
Maybe you are looking for
-
Passing Database Constant as a default value to EBS TCA API??
My synch BPEL process calls EBS TCA (Trading Community Architecture) APIs via Apps Adapter to create and update Organizations (Parties) and Customers (Accounts) accordingly. TCA provides two types of APIs to do the same job - one uses record types an
-
I believe I've encountered a phishing attempt via FireFox sync
I was using firefox 3.6.12, and noted a small pop-up box advising me that FireFox sync had encountered a password problem. It wanted me to re-enter the password in the popup box. Since I'm new to Firefox sync (I'm an x-marks refugee), I'm a little le
-
Itunes will not open message reinstall itunes error 7(windows error999)
I have unistalled and reinstalled several times will not open. Running windows 7, worked for a few weeks then this message error 7(windows error999)
-
Problem In loading Application_context.xml using CustomContextListener
Hi, I had a problem with Acegi Security 2.0.2 as we are using our customLoaderListener class.We are using Mevan Build tool, Weblogic11g Application server and We are create EAR File . CustomLoaderListener we are configuring in Weblogic-application.xm
-
Wls 10.0 - intermittent 401 errors
I have a simple HelloWorld servlet that is configured to use CLIENT-CERT as the authentication mechanism. I am attempting to deploy this to a WLS 10.0 instance (though the problem I'm seeing also occurs under 9.2) When I access the servlet once from