Report to find current settings of system in SOBJ

Does a report exists with which I can find the current settings which aren´t transportable?

Hi Damian,
Use SE16 on table OBJH where "current Setting" or column CURSETTING = X to display the objects that have current setting flag set.
Thank You.
Regards,
Deepika

Similar Messages

Reverted to old version? or... Cannot find current settings file?

Upon opening FF this morning, everything's different. The Google toolbar is displayed, persona is different, get prompts for creating accts already active (FF Sync, Last Pass), NoScript displays in status bar, settings not as I left them yesterday.
Five HomePage tabs in tact.
What in the world is going on?

See:
* http://kb.mozillazine.org/Preferences_not_saved

Report to find Locked objects in sap system

Hi All,
does anyone know the report to find out the locked objects in an sap system?
or
name of the table that stores locked objects ?
or any other way through which we can find the number of locked objects ?
Thanks and regards
Abdul Hadi

Hi,
You can unlock locked objects in transaction SE03.
Click on Display Repaired objects.
You can see all the objects that are locked.
To unlock you can select the particular object and click on Unlock.
Do reward points if the answer to your question is met.
Regards
Suhas

XL - Reporter - To set current system date as the PARAMETER to run a report

Hi
Version : SAP 2007 B
Patch : 10
Using the XL - Reporter we had designed a stock report as per the client rquested format. In that Report , we use parameter function to get the start date and End date ( 2 PARAMETERS) for which the report should be generated.
Using the Report Organizer , JOB was created for the above report scheduling that the report should run daily night 9 Clock and save it in Local Computer.
Now comes the problem , how to provide the parameter ( Start and End Date - which is nothing but the server date or computer date)
Is there is any way to set the XL-Reporter Parameter - as current date or server date .
Thanks

Hi Balaji,
Check the following thread its solves your problem
Re: XL Reporter Date Function
*Close the thread if issue solved.
Regards
Jambulingam.P

Problem report for finder: finder quit unexpectedly

Last night I removed some viruses etc., from my computer that were making ads appear and also tabs opening when not wanted by random ads. I then installed virus protection, and also installed a software update. During those processes I restarted my computer a few times. The last time, finder wouldn't close down but in the end my macbook restarted and since then I have this message constantly popping up: problem report for finder - finder quit unexpectedly. I can't open up anything else and get a message saying when I try: check with developer to make sure safari (as an example) works with this version of OS X. You may need to reinstall the application.
In ten the details part it states crashed thread 0 but it also mention application specific information:
dyld: launch, loading dependant libraries, ignoring DYLD_*env vars
and then:
dyld error message:
library not loaded:/ system/library/frameworks/videotoolbox.framework/versions/a/videotoolbox
referenced from: /system/library/frameworks/qtkit.framework/versions/a/qtkit
reason: image not found.
Please please help. It's driving me nuts. I really need my computer. So much that Im even contemplating just buying a new one if nothing works :/

FIrst, get rid of your "virus protection," which is either useless or worse than useless. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I called a contact and their current location showed up. I've never noticed or seen that before. Is that feature only available during calls or can I find current locations of any of my contacts?

I called a contact and their current location showed up. I've never noticed or seen that before. Is that feature only available during calls or can I find current locations of any of my contacts?

Your friend may have this turned on -
Settings - Privacy - Location Services - scroll all the way down - System services - Share my location - toggle on

Need help finding overclocking settings in BIOS on my Z97 Gaming 7

Hello Folks!
As the title states I need some help finding some settings in the BIOS to help in overclocking on my awesome new MSI Z97 Gaming 7 mobo! For instance I can't find anything related to Load Line Calibration, LLC. I am unable to find additional settings for PLL and what the settings that are there do, for instance CPU PLL, the options are something like LL and SB? There is no explanation for what either of these are. These may be pretty basic things in overclocking Intel. I should also mention that I am new to Intel processors and their mobo's. I have always used AMD cpu's and overclocking seemed a bit more straight forward. This is also the first MSI motherboard I have owned so I am also new to these. I have been a great fan of MSI GPU's for years and finally had the chance to buy a motherboard and while it has been a great experience thus far I seem to be slighty behind the learning curve here. I do appreciate all the help I am able to get. I have read the guides that I have seen others pointed towards and have not really found the information I am looking for there.

Nichrome, thank you for the heads up concerning placing my rig info into my signature, I will do that immediately. Thanks for trying to help. I really do appreciate it. I am very familiar with overclocking on the AMD platform. I have previously owned and abused the PhenomII 965BE, 1055T FX-8320 and FX-8350. I guess switching from AMD to Intel and being confronted by so many new terms and settings in the BIOS I was kind of lost. I wasn't really too concerned with the PLL per say other than just desiring to know as much about my new system and motherboard as possible. I have always been a firm believer that to get the most out of your equipment you need to know it intimately, I guess I will get there with a bit of time and perseverance! I was really mainly trying to figure out where the LLC settings would be hidden or what they would be known as with an Intel based system, this setting is usually quite important when trying to stabilize higher overclocks. I am currently running and tinkering with an OC speed of 4.7-4.8GHz @ 1.275v with temps staying ~55C. I was hoping to push a little further and was trying to give myself the best possible advantage in doing so. Again, thanks for the help and information!!!

Where I can find documentation platforms (operating systems) CERTIFICATES for earlier versions of ASE (15.5, 15.0, 12.5, etc)?

Hi....
Where I can find documentation platforms (operating systems) certificates for earlier versions of ASE versions of ASE (15.5, 15.0, 12.5, etc)?

The detailed certification information that used to be available on the Sybase web site is not currently externally accessible since SAP decommissioned the site - all that is currently available is the basic information in the SAP Product Availability Matrix (PAM) and the base release information available in the ASE documentation.
ASE support is looking into ways of restoring external access to the certification reports, possibly here as SCN documents or on the SCN wiki. I don't have any estimate for when this will be available, though.
If you have a support contract, you can open an incident to ask about specific versions/platforms; we still have internal access to the reports. If the support engineer doesn't know how to access the reports, ask them to get in touch with me.
-bret

Display settings in System Preferences acting up

I'm having trouble with my Display settings under System Preferences. I am not using an external monitor. My display seems to be working fine, but when I open Display settings to change resolution and colour, weird stuff happens. Basically, I cannot use this preference pane at all.
My display is 1920x1200, but when I open the Display settings, I get two windows, one telling me that "I am about to change [something something], some applications cannot display information correctly if the screen has less than 800x600 pixels", and the other one, the usual main window, telling me that my resolution is now 640x480 (it isn't).
If I hit OK in the extra window that pops up, my resolution changes to 640x480 or something similar, and I am unable to change back unless I reboot. Also, in the main Display settings window, it says <<< DO NOT LOCALIZE >>> under the list of available resolutions, as well as << do not localize >> in the box where I can change refresh rate. None of the buttons seem to be working.
Does anyone have any idea what is going on here? This was working just fine when I received my new MacBook Pro a few days ago, but now it's not. I've been repairing disk permissions and rebooting, etc.
I have been installing the trial version of Adobe CS5, but had massive problems with this installation (as a lot of people are reporting with CS5 and Snow Leopard...) and uninstalled them again, cleaning out Adobe preference files. Could I have deleted some other important files by accident in this process?

Quit System Preferences, then delete these files or folders.
Users/yourname/Library/Preferences /com.apple.systempreferences.plist
Users/yourname/Library/Preferences/By Host/com.apple.systempreferences.xxxxx.plist and com.apple.PrefPane.Network.xxxxx.plist (the X's will be numbers)
Also, Users/Home/Library/Caches
Now relaunch System Preferences. Let us know.
-mj

S_ALR_87003642 FI Periods, request, current settings

Hi all,
I have a little trouble. After support-packages the system need a request to open and close FI periods with tcode S_ALR_87003642. I've checked the system and I have not found that the current settings in tcode SOBJ por object V_T001B was changed. I've found the note 307222 'generated transactions for current setting' but I think that it is not relevant.
Any suggestion is wellcomed.
Thanks in advance.
Eduardo
PD: I'm sorry, I forgot it, we are in a ECC 50, APPL level 20 (ie: SAPKH50020)
Edited by: Eduardo Hinojosa on Jan 8, 2009 5:07 PM

In ECC.6 a request is generated in Development System for any change in OB52 / S_ALR_87003642, but the standard settings of Production System by Basis resources make it available for change without asking for Transport request.
Which system requires you the Transport Request on OB52. Is it DEV, QAS or PRD????????

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

ALV Report Displaying QUAN field different in systems

Hi Guys,
I have a field of type QUAN (quantity) on an ALV report that is displaying differently on the Devlopment and QA systems.
If I enter the value '5' in this field in Development and press enter, the value displays as '5.000'. If I enter the value in the QA field, however, the value displayes as '0.005'.
I have looked at domains and everything, but they seem simmilar.
Please advise fi there is something I have overlooked,
Thank you,
Christiaan

Hi,
Check in system default parameter settings. It works based on system default parameter settings.
System => User Profile => Own Data
In *Defaults* tab check the *Decimal Notaion* field.
Regards,
Shankar.

Crystal Report failed scheduling onto the File System

Hi,
We have set up a Crystal report file for scheduling via file system. This report has been running fine with regards to generation all through last few months, but has started failing to generate the report at the scheduled time onto the file system from the last few days. When I checked the logs of the Instance Manager, it shows an error like this 'Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 1017 ]'.
Please note, I was able to run the report from InfoView without any issue, so I don't believe there is any issue with stored procedure/report/database connection but something else.
Can someone please provide some insights on this.
Thanks.

Hello Satish,
Is this issue specific to FileSystem location? What about default enterprise location?
When you view the reprt in InfoView, click on Refresh button to get current data. If the repot was published with Saved Data option, then you would see data in the report but it would be old one.
Above step would confirm that there is no issues with database user credentials specified with the report.
Also, open the report in Crystal Reports 2011, refresh it and publish without saved data in BI 4 repository and schedule it.
Regards,
Mahesh

How do i find out what operating system my ipod touch has

I just got a new iPod touch for Christmas and assumed it was using ios5. But there is no icon for icloud anywhere on it and I can't find where it tells what its operating system is. How do I find out what operating system my ipod touch is using?

Go to Seting>General>About>Version
However, there is no iCloud app. There are various features the use iCloud. If you go to Settings do yu see a settinging labled iCloud?

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Report to find current settings of system in SOBJ

Similar Messages

Maybe you are looking for