Report to find function module names

Hi all,
My requirement is to get generate a report with the list of obsolete function modules and the SAP recommended function module equivalent to it. i have identified the table to get the obsolete function module . I m not able to get the function module equivalent to tithe obsolete function module.
Thanks
siva

Hi Sivaprasath,
U might have referred RODIR table for finding out function modules which are obsolete.
To find the replacement of obsolete function modules check OSS notes in service.sap.com with search string as the name
of the function module.
U will get Related notes where u can get the alternative FM.
Also check the documentation of obsolete FM,Else check the short description.It might be mentioned there itself for Alternative Function Module.
Regards,
Lakshman.

Similar Messages

  • How to find function module exit name when i know the Include

    As per my requirement i should change the existing exit. I know the include name but i want to
    know exit name. How to find out exit name based on include name. I tried Where-used list but it
    is not giving the exit and function module name.Please let me know.
    Regards
    Rajitha

    Hello Rajitha,
    1. You can do a "where-used" for the include & get the corresponding name of the exit function module.
    2. Goto table MODSAP & in the field MEMBER pass the name of the function module & you will get the Exit Name in the NAME.
    Hope this helps.
    BR,
    Suhas
    Edited by: Suhas Saha on Mar 16, 2009 3:08 PM

  • How to find Function Module & Program Name Used by IDOC

    hii Experts,
    i want to find program name & function modules used in IDOC. I have Idoc type, Message type & extension type.
    Help me

    Hi Vinod,
    Go to transaction WE64, click on the <b>search for message type</b> or press <b>shift+F6</b>. A popup will be displayed and here enter the message type for example 'QUOTES', u will be taken to the process codes available for the message type u have entered. click on the process code and data related to that process code will be displayed in the right hand side. Now double click on the process code, a pop up with function module name will be displayed. copy that and search for where used list in SE37.
    Hope it helps.
    Regards,
    Phani.

  • Function Module Name for Graph

    HI,
      Can any body tell me Function Module name for creating graph with horizontal scrollable.I dont want standard graph button.
    Thanks,
    Rakesh

    Hello,
    Check this standard programs they are using the same FM
    RFDOPR20                         Customer Payment History
    RFVD_COMPRESSION_01_I01
    RPRSTA01                         Travel Expense Reporting by Period
    RPSTA100                         Time-Related Statistical Reporting
    RPSTA200                         Time-Related Statistical Reporting
    RPSTA2GR
    RQALVF16
    RQETBI10                         Inspection lot selection
    RSDB4007                         iSeries: Display Wait Statistics by SAP Instance
    RSHOST10                         Monitor for OS Collector (ST06)
    RSORA003                         Statistics of Physical Accesses to Oracle Data Base
    RSORA007                         Statistics of Data Base Wait Situations
    RSORA138                         IO Stat for Each User Session (ORA7 V$SESS_10)
    Check this 3 FM
    GRAPH_2D                       Calling up the 2D business graphics
    GRAPH_2D_MENUE                 DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
    GRAPH_MATRIX_2D                Calling up the 2D graphics (user-friendly version)

  • Functional Module Name

    Hi Experts,
    I would like to do initial load of Business Objes (BUPA_MAIN) from R/3 to CRM. How to find the functional module name.
    Thanks in Advance

    Hi,
    I"m sorry but I didn't get your question. If your question was about the extractor function module which will be called on the R/3 when the initial laod takes place,you can goto the table CRMSUBTAB on the R/3 and check for the respective Function module name for BUPA_MAIN.
    Furthermore you can go to the transaction R3AC1 in CRM and look for the details of the adapter object BUPA_MAIN<see all tabs>
    Regards,

  • Finding Application Module name in read-only view object classes

    Hi all,
    I have a fairly basic question about finding application module name when we are coding in ViewObject java classes.
    I want to know how can I obtain <<application module>> NAME that our current view object is contained in it at run-time. I think there should be a way to find current application module NAME, when we are in ViewObject classes including View Object, View Row or view object definition classes (I've overridden all mentioned classes).
    I should notify that since our view object is read-only I may not count on view object's entity classes, coz as you know a read-only view object don't have any entity in it!
    So, if you have any idea about finding current application module name in view object java classes please let me know.
    Appreciate for your replies,
    Nasser

    Thanks guy, it was helpful:)
    Now i can access application module name through viewObject classes.
    But another question is raised...sorry if i m boring:( I promise its the final question ;)
    Is there a way to get application module name in an extended version of JboException class?
    Thanks again for your reply:)
    Nasser

  • Function module name for routing fom production orders

    Function module name for routing fom production orders

    Hi
    There are lot of fun modules related to routing
    like
    BAPI_ROUTING_CREATE
    BAPI_ROUTING_EXISTENCE_CHECK
    goto SE37 Tcode
    enter routing press F4
    you will get a lot out of that use the required one
    Reward points for useful Answers
    Regards
    Anji

  • Need Appointment Function Module Name to Read any Opportunity  No.

    Hello Gurus
    Can anyone  tell me the Appointment  type Function Module Name where Header_guid and  Appt_type are to be supplied .
    Means i want to only read(not to change or create)  an opportunity no for a particular Appointment type(Date_type).  I tried for the following FMs:
    1.CRM_APPOINTMENT_READ_OW
    2.CRM_APPOINTMENT_DETERMINE_OW
    3.CRM_APPOINTMENT_CHECK_OW
    thanks in advance
    Madhusudan

    Hello Madhusudan,
    for the activities you can use the following coding (example):
    -Beginn-
      CALL FUNCTION 'BAPI_ACTIVITYCRM_GETDETAILMULT'
        TABLES
          guid   = lt_guid
          header = lt_header
          date   = lt_bapibus20001_app_dis.
      CALL FUNCTION '/DKVES/SM_ACTIVITY_GETFROMBUPA'
        EXPORTING
          iv_partner  = lv_partner
        TABLES
          et_contacts = lt_sm_activity_simple.
      LOOP AT lt_sm_activity_simple INTO ls_sm_activity_simple.
        CLEAR ls_bapibus20001_app_dis.
        READ TABLE lt_bapibus20001_app_dis INTO ls_bapibus20001_app_dis
        WITH KEY ref_guid = ls_sm_activity_simple-activity_guid appt_type = 'ORDERPLANNED'.
          ls_order_aktiv-date_from = ls_bapibus20001_app_dis-date_from.
        APPEND ls_order_aktiv TO lt_order_aktiv.
      ENDLOOP.
    -end-
    If you want the other 'one order Objects' you can perhaps modify the selection.
    I hope that helps
    Torsten

  • Functional module name of smartform

    Hi,
    I have created a smartform and generated it.
    what will be the name of the Functional module?
    how to use it in abap
    Thanks,
    Mounika.

    hi,
    Use
    You trigger form printing by calling as few as two function modules. The first module uses the name of the form to determine the name of the generated function module. Then you call this module.
    The name of the generated function module is unique only within one system. Therefore, you must always call that function module first that uses the form name to determine the current name of the generated module.
    Prerequisites
    You defined the form interface in your form and activated the form.
    Procedure
    In the Form Builder call the function Environment ® Name of the function module and use STRG-Y and STRG-C to copy its name.
    In the application program define a variable of type RS38L_FNAM for the name of the generated function module:
    data fm_name type RS38L_FNAM .
    You can call the Smart Form in other parts of the application program as well. However, in that case you must make sure that the system can access the data to be passed from that location. We recommend to encapsulate the data retrieval in a function module as well.
    If desired, you can call the function module SSF_FIELD_LIST . It returns a list of the form parameters actually used in the form. You can use this information to limit data selection, if necessary.
    Call function module SSF_FUNCTION_MODULE_NAME . It returns the name of the generated function module:
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME             = '
    ENDIF.
    If the form is not active, SSF_FUNCTION_MODULE_NAME triggers the exception NO_FORM . There are two cases in which the function module generates an active version by itself:
    After a transport into another system
    After you changed the form interface of a previously activated form
    Call the generated function module. To do this, use the Insert Statement function for CALL FUNCTION in the ABAP Editor and use the name you copied in step 1 (to avoid having to copy all interface parameters manually). Then replace the function module name with the variable fm_name defined in step 2.
    CALL FUNCTION fm_name
      EXPORTING
      ARCHIVE_INDEX =
      ARCHIVE_PARAMETERS =
      CONTROL_PARAMETERS =
      MAIL_APPL_OBJ =
      MAIL_RECIPIENT =
      MAIL_SENDER =
      OUTPUT_OPTIONS =
      USER_SETTINGS = 'X'
        G_CARRID =
    IMPORTING
      DOCUMENT_OUTPUT_INFO =
      JOB_OUTPUT_INFO =
      JOB_OUTPUT_OPTIONS =
      TABLES
        GT_SBOOK =
    ENDIF.
    In this example, three variables and an internal table are passed. The parameters G_CARRID , G_CONNID , G_FLDATA , and GT_SBOOK have been defined before in the form interface.
    In the interface, pass all data you want to transfer to the form.
    Result
    The generated function module processes the form logic defined in the Smart Form. Its output is sent to spool processing.
    As long as you do not change the form interface, you can make any changes to the form. When you activate it again, the system generates the current version of the form as soon as you call the function module. Only if you change the form interface, you must adapt the interface in the application program.
    plzz reward if this information is usefull to u....
    plzz dont forget to reward

  • How to find function module

    hi all,
    how to find out particular function module suitable for this requirement.
    how to findout fm

    Hi Narendra,
    Apart from above replies, you can find function modules this way:
    1) Go to SE37
    2) From Menu, click <b>Utlities</b> and select <b>Find</b> option.
    3) A repository info system to find function modules will be opened.
    4) Use wild cards in function module box or short description to find function modules.
    PS: You can use this way to find programs in se38
    Regards,
    Vivek

  • Where to define remote function module name in RFC adapter

    R/2(IDOC) <->XI <-> R/3 (RFC)
    I can only define remote server information in RFC receiver adpater, but where to define the function module on remote server&#65311;

    Hi,
    the communication channel need the request in an specific xml format.
    Part of this format is the function modul name.
    when you use an imported rfc module you have automaticly the right xml format which the communication channel understand.
    the Communication channel need as root tag the function module name
    like:
    <ns0:Z_MY_FUNCTION xmlns:ns0="urn.sap-com:document:sap:rfc:functions">
    so it is with xslt mappings (for example) as well possible to call a rfc modules without importing it into your repository.
    regards,
    Robin

  • Tell me the function module name

    Hi ,
       By using material in MSEG table I need to get BOM field from MAST table. Then using that BOM I have to retrieve BMENG from STKO table and POSTP (item category) in STOP table and here I need to search table STPO with BOM#; retrieve component quantity from field STPO/MENGE for all materials with Item category N     …
    I can do the above things by using select for all entries…
    But One function module is there to do all these things..
    Can any one tell me the function module name…
    Thanks,
    Navaneeth

    check this  BOM related
    CSAP_BOM_ITEM_MAINTAIN
    CSAP_DOC_BOM_CREATE
    CSAP_DOC_BOM_DELETE
    CSAP_DOC_BOM_ITEM_SELECT
    CSAP_DOC_BOM_MAINTAIN
    CSAP_DOC_BOM_READ
    CSAP_MAT_BOM_ALLOC_CREATE
    CSAP_MAT_BOM_ALLOC_DELETE
    CSAP_MAT_BOM_CLOSE
    CSAP_MAT_BOM_CREATE
    CSAP_MAT_BOM_DELETE
    CSAP_MAT_BOM_ITEM_SELECT
    CSAP_MAT_BOM_MAINTAIN
    CSAP_MAT_BOM_OPEN
    CSAP_MAT_BOM_READ
    CSAP_MAT_BOM_SELECT
    CSAP_ORD_BOM_CREATE
    CSAP_ORD_BOM_DELETE
    CSAP_ORD_BOM_ITEM_SELECT
    CSAP_ORD_BOM_MAINTAIN
    CSAP_STOCK_TYPE_CREATE
    CSAP_STOCK_TYPE_DELETE
    CAVC_I_CHANGE_BOM_ITEM_DATA
    CAVC_I_DELETE_BOM_ITEM
    Check Above function modules which all related to BOM
    And also Check function groups CSAP, CSAI, CSAR, CSBD etc...
    Check out the following:
    http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
    regards,
    prabhu
    reward if it is useful

  • Crystal reports from SAP function module

    Hi,
    How to create report based on SAP function module...
    I tried it and succeeded for one function module... but i need single report for 3 function modules.
    Please let me know i can get them,,, please....!!
    When i select all 3, it showing links, what about Links??
    Thank You!

    No one answered it so far...!!

  • How to find the Function module name

    Hi,
         Use the appropriate function module to get the manager.  (Z_GET_MANAGER )
    OR:  Given the Org Unit,  find the Manager  for that Organization.  Relationship  O – B012 – S   gives the position of the Manager.
    for that we used  HRP1001 table in that fields
    OTYPE = O,  RSIGN = B, RELAT =012.
    This is the Job that desribes the position,  relationship  S – B007 – C.
    Use the appropriate Function Module to find the Job?witch table it willbe???
    Thanks & Regards
    Kavitha

    use table HRP1001 or FM RH_GET_LEADING_POSITION. this will give the position of the manager. now from PA0001 get the manager name by using this position(PLANS).
    You can also use FM - RH_GET_LEADER
    Regards,
    Amit
    Reward all helpful replies.

  • Can not find Function module in Crystal Report Database Connections FN

    Hi,
    we designed a Function Module XX in SE80.
    We set up BO Interagtion for SAP
    We can connect to the R3( CRM) System.
    We can See FN's.
    We can not see our Function Module XX we designed in SE80 in the Database Connection
    What is missing ?
    Any Authorization missing ?
    Which Where
    Thanks
    Martin Sautter

    Yes,
    we just have got it:
    /Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options ->  Table Name Like: <MYTABLE>
    than
    /Right Mice Button/Regenerate
    Thanks
    Martin

Maybe you are looking for