Report to find the WBS aganist the Notification

Hi gurus
In Service Notification We maintained the WBS element in location tab.  I want the report when I can find the WBS aganist the notification.
In IW59 I cant find this selection, Please let me know any workaround to check this
regards
Krishn

Krishna,
I assume every notification will turn to an service order and WBS element will automatically inherit to order  from notification in location tab. In this way, you could easily track the WBS elements against notification number. If you dont create an order and you want to find only with the notification, then its not possible.
Please be polite and frame the words properly....as you are placing the request
Mahee
Edited by: maheee on Feb 23, 2011 5:00 PM
Edited by: maheee on Feb 23, 2011 5:03 PM

Similar Messages

  • How to find the WBS element for the payment document?

    Dear All,
    How to find the WBS element in the payment document?...I know in payment doc there will not be any WBS but is there any option where I can find in any of the Tables.
    I am in the process of developing a Z report where i need to fetch the payment documents based on WBS. Can any one please help me on this.

    Hi Ram,
    As you are not giving any input of WBS at the time of payment you cannot fetch this directly. But to know the WBS for the reporting purpose on which WBS the payment has been made, you can develop a Z-Report. The WBS elements of clearing documents against the payment entry can be fetched out.
    In this report if there is a single payment against many invoices also possible with different invoice and WBS elements to be displayed on the Z-Report
    Regards
    Divya S

  • Unable to close the WBS element because of inventory issue

    Hello
    We are facing one issue where we are trying to close one WBS element but getting error that stock still exsists.
    When i checked in table MSPR i found that for one of the material in the WBS element the physical inventory process is still not complete
    Physical Inventory Blocking Indicator ,Indicator that specifies that the stock is blocked for a physical inventory has value A(Physical inventory not yet completed for amterial) in that table for one of the materials.
    KIndly advice how to complete the proces and close the WBS.

    Dear,
    Check the links:
    Physical inventory block in material master
    Re: Physical Inventory & Goods movement process
    Cycle count not counting correct number of items
    Regards,
    Syed Hussain.

  • How to find out the user from the Jobs queue in Report server

    Hello All!
    I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
    Regards
    Shobha

    hi,
    The below tables will give only the name .
    USER_ADDRS
    USER_ADDR
    USER_ADDRP
    USR02
    i think you need email address .
    you can use this Tcode : su01d
    and give the user name and excute it
    i hope it will help you.
    Ram
    Edited by: Ram velanati on Jun 30, 2008 6:57 PM

  • HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

    Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

    Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
    You chance of getting it back is very small.
    There are a few things you can try.
    Try remote lock/wipe your iPhone through Find My iPhone.
    https://www.icloud.com
    You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
    Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
    http://support.apple.com/kb/HT2526

  • Report to check the WBS "system status"

    Hello friends,
    Would anyone know for a standard report where I can check for the WBS "system status"?
    i.e.: I want to know everything I have in AVAC status
    Thanks and Regards
    Alex

    You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
    System will display you user / system status for all the PS Objects.
    With Regards
    Nitin P.

  • S_ALR_87013532 report -plan cost not rolling upto the WBS/Project level

    Dear All,
    Plan cost from production orders is not rolling up to the WBS/Project level in S_ALR_87013532 ( Plan/Actual Variance report).
    Where as plan cost from network is properly rolling up to the WBS/Project level in the above report. 
    Please suggest what could be the reason for this issue. Is any configuration needs to be done for this.
    Thanks & Regards,
    Vishal

    Dear sir,
    Thanks for the reply & sorry for late response from my side.
    OPSV settings are already maintained in our system.
    Some how i realized  later that cost are actaully getting rolled to the WBS level, but we have observed one more discrepancy.
    Example -
    Production order "X" value - 100 (  as seen through co03)
    Production order "X"value- 40 ( as seen through report s_alr_87013532).
    We found that  in report  s_alr_87013532 , although my total  producton order value of 100 is represented at the WBS /Project level, but at the production order level , it is showing value of 40. 
    On further analysis we found that for production order X
    Materail cost- 60
    Labour cost-40
    The material cost of 60  is not getting fetched against production order "X" in report " S_ALR_87013532".
    There are very few cases , where such discrepancy is seen.
    Kindly suggest.
    Regards,
    Vishal

  • How do I find out what the name of the reports server  is?

    Hi Everyone,
    I am connecting to a remote machine using gotomypc.com and have started up Reports Builder 10g. I know very little about installation of Oracle on this machine. Just enough to log into Oracle 10g and run tools like the Report Builder, TOAD, etc. When I run a report from the Report Builder I get a web browser with a blank report. It works when I run a paper report. I am guessing that the Reports Server is not running or not configured properly.
    Can you tell me how to find out what the name of this Reports Server is and/or how to start it up?
    Thanks.
    Emad

    I realize this is old, but... You can find out your servers name by looking at the $ORACLE_HOME\reports\conf\rwservlet.properties file. It has a entry for SERVER. Should also have a corresponding conf file after starting up OC4J and activating the server for developer installs.
    Next, you can also run rwdiag. It will show you all report servers available to your installation. This is interesting when Multicast is used by Reports (10g). Ran into issues with servers named the same not on the hardware I was expecting.... ;)
    Good luck.
    BradW

  • Report to find the basic price

    dear gurus,
    is there any report to find the vendor , material , and the basic price excluding tax.

    Hi,
    Me2L will be a better report to view your desired data.
    Hope this will work for you.
    T & R,
    Brijesh

  • Report to find the retainage amount per each supplier site

    Hi All
    Is there a report to find the retainage amount per each supplier site ?
    Regards;

    Hi.
    The Withholding Tax by Supplier Report shows both supplier and site.
    Octavio

  • Report to find the PO held up at what release code

    Users need a report to find that there Po is awaiting release at which release code.
    I searched but could not find any report from where the user can see at which release code there Po is struck up.
    Pl help on this.

    Hi
    I dont think there is any report like that to get all unreleased PO's and what release codes are awiting to release. However as a workaround you can use the Table EKKO with slection option of Release Indicator as 1 "PO not yet approved and pull out the Release code associated with it.
    May be you can create a query with only the reauired information and use it for your users..
    Thanks

  • Report to find total absences of all the employees for 2006

    we have to find the total absences of all the employees for the year 2006. is there any good report to do this job

    If u wnt absence data then u can create query in SQ01.
    or
    Hope thts wht u wanted ,pls change the code accordingly as per ur need,just refer it as demo code -
    REPORT  ZGILL_ABSDATA                           .
    tables: pa2001.
    data: begin of itab occurs 0,
          Pernr like pa2001-pernr,
          Subty like pa2001-subty,
          begda like pa2001-begda,
          endda like pa2001-endda,
          ABWTG like pa2001-ABWTG,
          KALTG like pa2001-KALTG,
          end of itab.
    start-of-selection.
    select pernr subty begda endda abwtg kaltg  from pa2001 into table itab
    where begda ge '20060101' and
    endda le '20061231'.
    if sy-subrc eq 0.
    write:/2 'Emp No',
           12 'Abs Type',
           18 'Start Date',
           28 'End Date',
           40 'Abs Days',
           50 'Calen Days'.
    loop at itab.
    write:/2 itab-pernr,
           12 itab-subty,
           18 itab-begda,
           28 itab-endda,
           40 itab-abwtg,
           50 itab-kaltg.
    clear itab.
    endloop.
    else.
    message i000(000) with 'No data found'.
    endif.

  • How to compare two excel reports and find the difference in BI Publisher

    Hi All,
    I have a requirement that needs to compare two excel reports in XML Publisher 5.6.2. or BI publisher 10.1.3.4
    If anybody has an idea about this pls help us.
    Thanks,

    Since our customer wants to have this comparison only with BI reports....here is the scenario how the comparison should be..
    Now,we have a parameters called Customer name and version id. Version id list will be refreshed based on the customer selection.
    User can generate the report based on the selected customer name and version id. These data are fetch from the oracle database and we are using Data Template in the BI Publisher.
    Now the requirement is customer wants to compare two version id data. for example, v1.2 and v1.3
    Now they wanna to see both the reports while generating in the same work sheet, like, v1.2report should display in the left side and the v1.3report has to display in the right hand side of the same work sheet.
    Now...If there is any addition happened in v1.3 report,then that cell/data should display as a green color in that report.
    If any deletion happened in v1.3report then that should be in the red color.
    If any modification happened in v1.3 then that should be in the yellow color.
    If there is no difference then that should display as it is.
    the thing is that, the both the reports (v1.2 and v1.3)should display side by side in the same worksheet with the format and everything........only the difference should be highlighted.
    Template is same for both the reports..
    To display the data for both versions i think i can generate the template side by side of both in the same worksheet.
    Now, My question is how to find the difference of data in the RTF Template for both the versions
    Can anybody assist me?
    Thanks,
    Edited by: user753355 on Jun 9, 2009 12:03 AM
    Edited by: user753355 on Jun 9, 2009 12:06 AM
    Edited by: user753355 on Jun 9, 2009 12:16 AM
    Edited by: user753355 on Jun 10, 2009 3:59 AM

  • Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

    Hello,
    two of our users get the following error message, when opening two specific reports:
    First Report: Cannot find Dimension Scenario.
    Second Report: Error executing query: the member null doesn't exist in this application.
    Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
    I set the same rights for me, but i can access the reports without problems.
    Somebody encountered the same problem before?

    Hi there,
    I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
    In order to fix it:
    1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
    2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
    3. If he cannot see the dimension, try to change the layout of the report.
    Regards,
    Thanos

  • HT201365 Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in

    Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in my pc...?

    Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

Maybe you are looking for