Report to get WBS elements based on Project Type

Dear Experts,
Is there any report exists in Project Systems to get WBS elements based on Project Types.
This we can check in the table PRPS-PRART.
But i need to know the availability of T Code.
Thanks in advance.
Regards,
Srinivasareddy Y

Hi,
If its a one time requirement using CN43N might help in meeting the requirement. However, first it has to be executed for a certain range of projects and then the layout will have to be changed accordingly. Instead of doing this if a custom report is developed with the input parameter as "Project Type" it would make it much more easier. You can even have the F4 search option for the input parameter. Doing this will help if the report is going to be used frequently in the future.
Take your call and proceed accordingly.
Regards,
Gokul

Similar Messages

  • Line item report on Statistical WBS element.

    Hi All,
    I need to extract Line report on statistical WBS element. I tried CJI3 and end up with the message No costs, revenues or finances were selected.
    can some one help me on this.
    Thanks and Regards,
    Vinod

    Hi,
    Please check below:
    Table PRPS: Select OBJNR and pass to RPSCO and check if any value exists there. Note down the Value type, Year.
    While in CJI3, please check if any dynamic Selection is active, remove all.
    if mutliple selection shows any exclusions, remove all.
    Posting Data: Remove the values. (Or put from 01.01.1900 to 31.12.9999)
    Select the standard SAP Layout (Starting with 1SAP)
    Value type=11 should be selected by default (Ensure it is checked)
    Hope it helps!
    Thank you and Regards,
    Varshal Kachole

  • How to do budgeting at activity level and WBS element level in project syst

    Dear GURU's,
    Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process.
    I need how to do this configuration to map this scenario.
    Regards,
    Bhanu

    Hi Bhanu,
    Use this link :
    http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
    after page opens , click on BUDGET MANAGEMENT , There you will find each and every step you want .
    Thanks ,
    Dhruv Kumar Malhotra

  • 1 project definition with several wbs elements or several project definitin

    Hello
    I need projects as account assignment elements in CO (when entering vendor invoices for costs). Should I have 1 project definition with all projects /wbs elements underneath, or should I have 1 project definition uniquely defined for each project/wbs element? Some projects are not settled to assets und construction, some projects are settled to assets und construction.
    kind regards
    Arjan

    Arjan
    I don't think you can have Projects as account assignment objects. You can have WBS element as account assignment object.
    One alternative I can suggest, if you want to see project costs at higher level instead of breaking down the project into many WBS elements. Create a project with one WBS element only and use that WBS element as account assignment object.
    It is only possible to have a project with one or more WBS elements. I don't think you can define projects within projects.
    letus put it this way assume WBS elements are projects within a project. But make sure all the WBS elements are related to one project
    Hope you are clear now.
    Thanks
    Prasad

  • How to Find PS GUID with WBS Element (POSID) or Project Definition (PSPID)?

    Hi all,
        I am creating the custom Extractor similar to 0CO_OM_WBS_1 (WBS elements: Costs) to load into 0PS_C041 (Project System - Controlling (New)). I have the WBS Element (POSID) & Project Definition (PSPID) and I how can I find the GUID (UUID in X form Binary) so that I could map it into 0PSGUID InfoObject in the Transformation. We have WBS Element & Project Definition (PSPID) as Navigation Attributes of 0PSGUID instead of under some Dimension in 0PS_C041 Cube and that's why I am trying to find the GUID with WBS Element (POSID) or Project Definition (PSPID), PLEASE.
    Thanks,
    Venkat.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • Repot based on Project type

    Hi Experts,
    Is there any std. report in ps basing on project type?
    i have searched. But i could not find the same in PS STD Reports.
    pl. suggest.
    Regards,

    Thank you very much for the suggestion.
    It is worked.
    Regards

  • Is there standard report to check actual (GR) based on project/ WBS

    Hi All,
    Is there any standard report to check actual based on project / wbs. At the moment i know the tcode CJ74.
    Is there any other report ?
    Thank you.
    Best Regards,
    Denis Evitanto

    Hi,
    Report (S_ALR_87013542) is most effective report for projects as planned cost / actual cost / Project profitability will be obtained from there.
    Planed cost of the project will be obtained from the report. E.g. if you are doing project costing through Cost elements, in the mentioned report, all the cost planned through various Cost elements will be obtained. After posting actual cost to project, there can be comparison of planned cost Vs actual cost.
    Hope this will help you.
    Best Regards,
    Rakesh Pradhan

  • Unsettled amount report or a WBS Element

    Hi Guys,
    While I understand that we can see the actual cost line items in CJI3 but do you know whic report can show me only the Unsettled costs for a project ?
    CJI3 treats settlement as a negative actual cost and it clubs it in the same report.
    I will explain further, if I have spent 100USD on a WBS element and 25 has been settled to an Asset, 30 to a Cost Center and 10 to a G/L, which report can just show me the balance amount of 35USD against this WBS element.
    Is there any filter option I can use in CJI3 itself on Ref. Tran etc. ??
    Appreciate any help.
    Thanks.
    Regards,
    Manish

    Hi Manish,
    Yes it is possible to view unsettled project cost in CJI3. The standard layout of CJI3 (without any filters) displays all line items including the settlement ones. This is shown as a negative amount which is deducted from the overall amount. Therefore the final total figure that you see in CJI3 is the amount that is unsettled.
    Please note that if the whole amount has been settled then CJI3 would show a value of zero (when no filters are applied).
    Regards,
    Ammar
    Edited by: Ammar Zaheer Syed on Oct 20, 2011 3:19 PM

  • WBS Element based Output Issue

    Hi All,
    I m having two inputs. Project ID and WBSElt Assume that inside one WBS there are four other WBS Elements. I can give any one among four WBS elts as input with Project ID. How can i filter the data based on the selected WBS elt? Plz help me out.

    Hi
    I will give you the example for the selection
    example:
    Project 1
    Level 1 WBS
    Level 2 WBS element
    Level 3 WBS element 1
    Level 3 WBS element 2
    Now if you want select WBS element 1 and 2 with the project 1
    enter
    Project ID: Project 1
    WBS Elements: Level 3 WBS element 1 to Level 3 WBS element 2
    so the system will diaplay the relevant data's.
    Please try and revert back
    Thanks
    S.Murali

  • Copy std wbs element in operative project & copy material components to SO

    Dear Friend's
    As i know following things not possible in std. sap ps. Still i would like to know is there any possibility to acheive same in std. sap ps.
    1) I have created one std. project template, which is made for standardise Projects. Here we can copy same template for operative Projects. But my client having a requirement like they wanted to just copy a Single Std. WBS Element of any level from that std. project template to create operative project...can is it possible in std. sap ps.
    2) Can is it possible in std. sap ps to copy the material component (like fert, halb, roh, hibe, hawa etc.) which we have planned in Project Builder to Sales Order.
    3) In std. sap ps we can handle projects through multiple plants & multiple business area's. In my scenario cross plant & cross business area material's is supplied to any particular project. so same way can we create Sales Order for multiple plants & multiple busniess area's.
    Thanks & Regards,
    Sandeep

    closed.

  • Automatically PO creation from WBS element in a project

    Hi,
    Is it possible to create Purchase Order automatically from the project that has only WBS element (no network)?
    My project has only WBS element and my client want to trigger PO creation automatically for prorements to projects.
    I appreciate your replies.
    Regards,
    Ja

    Hi Ja,
    Sorry, but you cannot create a PO automatically for a project that has only WBS elements and no network or acitivites. Since materials can only be attached to activities in a project it is mandatory to have an activity to trigger a PO automatically from the project.
    You may have to create a PO manually and then assign the WBS as account assignment.
    Regards,
    Gokul

  • WBS elements related to project definition

    Hi all,
    I need to extract all the WBS elements (PSPNR) from PRPS related to the project definition (PSPID) in PROJ. Please help me with the query.
    For Example:
    For project definition: 6HU-000000120
    There are 2 WBS elements: 6HU-000000120(top level) and 6HU-000000120-1(second level)
    Thanks,
    Netrey.

    Hi
    Join the tables PROJ and PRPS using the field
    <b>PROJ-PSPNR = PRPS-PSPHI.</b>
    select af1 af2
             bf1 bf2
         into table itab
    from proj as a join prps as b
    <b>on apspnr = bpsphi</b>
    where a~pspid in s_pspid.
    Reward points if useful
    Regards
    Anji

  • WBS element deletion after project release

    Hi,
    getiing an error ,scenario is after deletion of WBS element  if i try to add same wbs..throwing an error that WBS element XYZ version RELEASED already exists.
    thanks

    Hi,
    You can refer this thread for more details;
    Re: Restoration of original WBS code
    Regards,
    Kabir

  • Getting error while opening Enterprise project type (EPT)

    Hello All,
    In Project Server 2013, I am getting error while opening any Enterprise project type (EPT) from EPT page or when I am trying ot create any new EPT. How can I troublshoot this, please help.
    Thanks in advance

    I searched ULS logs and got the below error details.
    Exception occured in method 'Workflow.ReadWorkflows' System.Data.NoNullAllowedException: Column 'WORKFLOW_ASSOCIATION_NAME' does not allow nulls.     at System.Data.DataColumn.CheckNullable(DataRow row)     at System.Data.DataColumn.CheckColumnConstraint(DataRow
    row, DataRowAction action)     at System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent)     at System.Data.DataTable.SetNewRecordWorker(DataRow row,
    Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException)     at System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID,
    Int32 pos, Boolean fireEvent)     at System.Data.DataTable....
    Let me know your advise on this.

  • Need F4 Help for custom container element based on partner type

    Hi Friends
    I am displaying customer details in custom container .In that custom container I have a field Partner number,Partner type etc etc..
    I included F4 help for partner number field, In that I referenced the following field.Now its coming perfectly.
      wa_cat1-f4availabl = 'X'.
       wa_cat1-ref_table = 'KNA1'.
      wa_cat1-ref_field = 'KUNNR'.
    But as per my requirement, customer wants to get the different F4 help when the partner type eq "Contact Person".
    Rest of the partner type(Ship to party, Sold to party,Reseller, End user) should show the above one.
    So I dont know, where I have to change, because in the field catelod level there is no option to control particular type in the column.
    Kindly help me on this.
    Thanks
    Gowrishankar

    Hi Jose
    Thanks for your Input.I created Event Receiver than Defined and implemented a method to get F4 help for customer number and email id field.Already F4 help is available for Email ID.Now I want to Include the F4 help for partner number field, it will call the search help based on partner type.I can able to get the partner number field search help, but F4 help is not working for email id.
    I am not sure some whee its over writing some values or I am not sure.If I comment partner number F4 help class, I can able to get the F4 help for email address.
    Plz guide to me to fix the same.
    Thanks
    Gowrishankar

Maybe you are looking for