Report to Print from SPOOL to Printer

Dear SDN users,
is there any function module for print the report from SPool to

Hi Surendra ,
Once you check the given link:
Spool to Print
I think you may get some help.
Thanks,
sarita

Similar Messages

Function module which can print from spool request ?

Hi ,
Is there any function module which can print from spool request ?
Regards
pabi

I think NO.
You have to take print from SP01.
Amit.

How to print from a remote printer.

I have a HP computer in my office running windows XP connected by a cable to a Linksys router, also in the office is an HP all-in-one printer connected wirelessly to the router. In the living room 50 feet away, I have another HP computer, connected wirelessly to the network, running windows XP and a smaller HP all-in-one printer.
I have been attempting to print from the office printer, using the living room computer, without success. Every time I try, the living room printer prints the document.
Does anyone know how to configure these computers and printers to achieve the results I want, mainly printing on the office printer from the living room computer?
Aloha, Bob

Go into Control Panel > Printers. Delete either the problem computer or both computers from the list.
Re-add them:
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP.

Printing From iBook To Printer on a Vista, Can't see Vista shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately. When same machine is booted into XP the priners share perfectly with both of my iBooks, but when the same machine is booted into Vista with the printer shared etc, the iBooks don't see the printer. Other Windows machines on the newtork do see the shared printers in Vista.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.
ibook G4 1.33ghz 12, 1.42ghz 14 Mac OS X (10.4.8) 1gig ram,

Some good resources:
http://articles.techrepublic.com.com/5100-10877_11-6174109.html
http://discussions.apple.com/thread.jspa?messageID=4305954&#4305954
http://www.microsoft.com/technet/network/evaluate/vista_fp.mspx
After none of these hints worked for me I plugged my Xerox Phaser 6120 into an airport express base station via USB. Even though Apple does not say that the Bonjour for Windows printer wizard works for Vista, it does. Download it from http://www.apple.com/support/downloads/bonjourforwindows.html and install it on your PC.
PowerBook G4s Mac OS X (10.4.9) Windows XP & Windows Vista Boxes

Printing From iBook To Printer on Vista Desktop, Cant see shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista RC1 on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.
ibook G4 1.33ghz 12, 1.42ghz 14 Mac OS X (10.4.8) 1gig ram,

That might have been the situation for the beta's and first RC's, but I have a final build. Plus the fact that other Windoze notebooks see the printer on the Vista box just fine leads one to believe it is a mac/Vista specific issue.
If anyone actually has experience with a MAC and Vista , I would appreciate hearing from you.
thanks,

Printing From iBook To Printer on Vista Desktop, Can't see shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista RC1 on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.

That might have been the situation for the beta's and first RC's, but I have a final build. Plus the fact that other Windoze notebooks see the printer on the Vista box just fine leads one to believe it is a mac/Vista specific issue.
If anyone actually has experience with a MAC and Vista , I would appreciate hearing from you.
thanks,

I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!!

While printing from word appl. printer after each line puts in number of page,

while printing from word appl. printer after each line puts in number of page, so I do not print 3 pages but 5 instead. What to do?

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I set up imac to print from a remote printer connected by a cable to a PC?, How do I set up imac to print from a remote printer connected by a cable to a PC?

How do I set up my Imac to print from a remote printer connected by a cable to a PC running Windpws XP?

Hi Duane,
Thanks for clarifying the hardware setup. Using the S-video connection from Hi8 to the DV converter is a good workflow. If you are showing a few errant lines at the bottom, that is a by-product of analog tape and please keep in mind that they are likely in the "overscan" area which normally does not show up to the TV viewer, though you see it in the edit software because you see the full overscan image edge-to-edge. So you probably don't have to worry about that, but if it bugs you, you can use the CROP effect to remove, or create a black title overlay to "hide" that stuff. As you said earlier, you can scale the whole picture up, but that is going to soften the image, not good.
As for shrinking the picture - this is only helpful when producing HD content (i.e Blu-ray) and mixing in some SD source material. I see this used on HD documentaries a lot. When they need to show some older SD footage, it is shown "actual size" over some sort of background. By showing the SD clip at actual size, it is not scaled at all and keeps it's quality on the HD display. If making a DVD, which is standard definition, then there is nothing to gain from this practice and it would in fact make things worse because you are reducing the resolution!
For a 75-minute project, I would use CBR 7.0 encoding to MPEG-2 for DVD.
Jeff Pulera
Safe Harbor Computers

When i try to print from firefox the printer just spits out a blank sheet of paper. all other programs i try to print from work just fine. what can i do to fix this problem.

when i thy to print from firefox the printer spits out a blank sheet of paper. all other programs i print from work just fine including internet explorer.
== This happened ==
Every time Firefox opened
== when i installed firefox about a month ago

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

How can I print from Dreamwaever File/Print no longer seems to work on MAc

How can I print from Dreamwaever File/Print no longer seems to work on MAc

The Print Code function has been removed from DWCC (not exactly sure why).
You can help get it back by submitting a request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router

HP PAvilion dv1000, Windows XP
Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router.
I had been able to print wirelessly from laptop to HP 7310 Officejet all-in-one, but now all I get is "document failed to print" message. I can get documents to print on this printer using my smart phone, but not the laptop.
I have used "find printer" button on print screen and can see the printer to select.
Any suggestions?
This question was solved.
View Solution.

Figured it out after looking at a few other posts...
Configured port to printer IP Address and now it is printing perfectly.
Thanks for having posts out there to review.

Print from spool

Hi all,
how can we print a spool request.
All answers will be appreciated.
Thanks,
Prashanth

Hi,
Please use Tcode: SP01 for printing spool requests.
You can give inputs like spool request number/username/From Date/Output Device etc to get the relevant spool request.
Then select or check mark the relevant spool and click on the Print button available on the toolbar.
Hope this helps.
Thanks,
Srinivas

Unable to get the print from the zebra printer

hi,
i have copied a SAP standard form into a Zform. i have made changes to the Zform depending on my requirement(i.e. i have added more fields and also barcodes). I did not make any changes to the driver program since i copied the standard layout. After making changes to the Zform when i check the print preview everything seems to be fine. But when i try to print the Zform from a zebra printer it does not get printed. But it says printing is completed and also a spool request is created but the print never comes

Hi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna

Report to Print from SPOOL to Printer

Similar Messages

Maybe you are looking for