Report to pull kernel patches of all the satellite systems

Hi Experts,
Is there any report in solman system to pull kernel levels of all the satellite systems or is there any process to find out kernel versions of all the satellite systems at a single glance in our solman system.
Our solman system version is 7.0 EHP1 SP6.
Thanks,
Venkata

Hello Jared,
Fast forward a couple years now. Is this kernel information a feature now in Solution Manager 7.1 SPS8?
Cheers,
Dan Mead

Similar Messages

Urgent: sxi_cache on the satellite systems

Hi every one,
The question basically would be how the transaction sxi_cache should behave on the satellite systems.
When I run the tcode sxi_cache on one of the satellite system. I get 2 error messages
1.Unable to refresh cache contents
2.Error during last attempt to refresh cache
Double-Clicking on each of them will give an error-id as "BUSINESS_SYSTEM" but no error-code. In the screen below, it says "NO INTEGRATION SERVER"
PS:Delta-Cache Refresh and Complete-Cache Refresh are disabled on all the satellite systems. I am not sure if this is normal.
reg,
Message was edited by:
naveen chitluri

Hi,
Check this blog i am not so sure if it will solve the issue.
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory

Cheers,
*RAJ*

We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.

Hello
We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.
Before we started with the Patches, we had one Gig of free space on our hard drive, now we are down to less than 10 Megs!!!
What happened is that the patches didn't work, we had to try them 7 times, and every time they created a 'temporary restore point' which we don't know where that point is.
The server has crashed twice since, we were able to place it back online but we're afraid it will crash again.
We have several customers on that server, we are very worried,
Can you please help us?
Thank you

Hi,
Hope the below article be helpful:
Clear space on your hard drive by deleting old Windows uninstall folders
http://news.cnet.com/8301-13880_3-9862223-68.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
And as far as I know, we could not use diskpart to extend C drive, 3rd party utilities may work, please go through the below thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/03068ecb-7edd-43d8-bc68-12bc466c583f/how-to-extend-the-windows-2003-c-drive?forum=winservergen
Regards,
Yan Li
Regards, Yan Li

To get the logical system names of all the child systems in a CUA envirnmnt

Hi Gurus ,
Is there any table where we can find the logical system names of all the child sytems in a CUA environment .
This is for a requirement that i need to develop an automated process where we can reset the password of all the child system in a CUA environemt when requested by the user at once .
I found some tables such as V_TBDLS , but they do not contain the exact information what i need .
Thanks in advance ,
Harshit Rungta

Hi,
You are in the right track. BD54 will show you the logical system name for all the existed systems in CUA.
Else you can also go to your CUA system and execute t-code SALE --> Basic Setting --->Logical Systems ---> Assign logical system to client -
> Display details
here you can see logical system names for all the clients assigned to CUA.
Thanks,
Deb

How to get the list of roles assigned to a user in all the child systems

how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta

A transacction or table which can display all the souce system

Hi,
Is there any transaction or table which can display all the source systems?
Thanks in advance.

RSA1->Modeling-> Click on Source Systems, here you can see all the source systems connected with BW.
tcode: SM59 & expand all the connections. Here you can see all the connections.
Hope it helps..

Powershell script to get list of softwares installed as shown in registry on all the remote systems in a txt file

Hi
I need to know the command for getting list of softwares installed on all the remote systems in network which are existing in their respective registry like HKEY_LOCAL_MACHINE\SOFTWARE of all other systems

Hey
Sorry this isn't powershell but it should do the job if you want to use it. The problem with using the Win32_Product WMI Class to enumerate the installed software (especially on Windows 2000 & 2003 Servers) is that the WMI class is NOT installed by default. Here is a VBScript i wrote to read a list of hostnames from a text file named "ComputerNames.txt" from the scripts directory and attempt to remotely enumerate all subkeys within the following registry key
HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall
For each subkey enumerated it will attempt to read the value of the "DisplayName" key and output the results to a csv file.
(the results should be the same as what you would see when you open Add/Remove Programs)
Hope that helps
Cheers
Matt :)
'Script Name : CheckInstalledSoftware.vbs
'Author : Matthew Beattie
'Created : 01/03/10
'Description : This script reads a list of hostnames from a text file name "ComputerNames.txt" in the scripts working
' : directory. For each hostName it requests an ICMP response and if successfull attempts a remote registry
' : connection to enumerate and read the registry values of installed software. All results are logged to the
' : scripts working directory in a log file per computer name.
'Initialization Section
Option Explicit
Const ForReading = 1
Const ForAppending = 8
Dim objFSO, wshNetwork, wshShell, hostName
Dim scriptBaseName, scriptPath, scriptLogPath
On Error Resume Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set wshShell = CreateObject("WScript.Shell")
Set wshNetwork = CreateObject("WScript.Network")
scriptBaseName = objFSO.GetBaseName(Wscript.ScriptFullName)
scriptPath = objFSO.GetFile(Wscript.ScriptFullName).ParentFolder.Path
scriptLogPath = scriptPath & "\" & IsoDateString(Now)
If Err.Number <> 0 Then
Wscript.Quit
End If
On Error Goto 0
'Main Processing Section
On Error Resume Next
PromptStart
ProcessScript
If Err.Number <> 0 Then
Wscript.Quit
End If
PromptEnd
On Error Goto 0
'Functions Processing Section
'Name : ProcessScript -> Primary Function that controls all other script processing.
'Parameters : None ->
'Return : None ->
Function ProcessScript
Dim fileSpec, hostNames, regKey, keyName, results, result
keyName = "DisplayName"
regKey = "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall"
fileSpec = scriptPath & "\ComputerNames.txt"
'Ensure the "ComputerNames.txt" file exists within the scripts working directory.
If Not objFSO.FileExists(fileSpec) Then
MsgBox DQ(fileSpec) & " does not exist!", vbCritical, scriptBaseName
Exit Function
End If
'Read the list of hostNames from the "ComputerNames.txt" text file within the scripts working directory.
If Not GetScriptInput(hostNames, fileSpec) Then
Exit Function
End If
'Attempt to read the registry from each hostname read from the list of hostnames.
For Each hostName In hostNames
Do
'Ensure the system responds to an ICMP request.
If Not CheckConnection(hostName) Then
LogMessage 2, "Failed to respond to an ICMP Request"
Exit Do
End If
'Enumerate and read the registry values.
If Not GetRegValues(results, hostName, keyName, regKey) Then
Exit Do
End If
'Log the registry values results.
For Each result In results
LogMessage 0, result
Next
Loop Until True
Next
End Function
'Name : GetScriptInput -> Reads a text file to be used as Script input.
'Parameters : items -> Output: An array of items in the script input file.
' : fileSpec -> The full folder Path, file Name and extention of the script input file.
'Return : GetScriptInput -> Returns an array of items for script input and True or False.
Function GetScriptInput(items, fileSpec)
Dim scriptInputFile, itemsDict, item
GetScriptInput = False
Set itemsDict = NewDictionary
If Not objFSO.FileExists(fileSpec) Then
Exit Function
End If
On Error Resume Next
Set scriptInputFile = objFSO.OpenTextFile(fileSpec, ForReading)
If Err.Number <> 0 Then
Exit Function
End If
On Error Goto 0
Do Until scriptInputFile.AtEndOfStream
item = scriptInputFile.ReadLine
If item = "" Then
Exit Function
End If
If Not itemsDict.Exists(item) Then
itemsDict.Add item, ""
End If
Loop
items = itemsDict.Keys
GetScriptInput = True
End Function
'Name : CheckConnection -> Checks a remote host using WMI ping.
'Parameters : hostName -> Hostname of computer system to verify network connectivity with.
'Return : Boolean -> True if hostname replies. False otherwise.
Function CheckConnection(hostName)
Dim ping, response, replied
Set ping = GetObject("winmgmts:{impersonationLevel=impersonate}").ExecQuery _
("select * from Win32_PingStatus where address = '" & hostName & "'")
For each response in ping
replied = Not IsNull(response.StatusCode) And response.StatusCode = 0
Next
CheckConnection = replied
End Function
'Name : GetRegValues -> Enumerates the subkeys in a registry key and the values of the keyName.
'Parameters : hostName -> String containing the hostName of the system to enumerate the registry keys on.
' : keyName -> String containing the name of the registry key value to enumerate.
' : regKey -> Registry key to enumerate subkey names for.
'Return : GetRegValues -> Returns True and an Array containing the registry key values otherwise False.
Function GetRegValues(results, hostName, keyName, regKey)
Dim objReg, regDict, rootKey, hive, keyValue, subKeys, i
GetRegValues = False
rootKey = regKey
hive = GetRegistryHiveFromKey(rootKey)
On Error Resume Next
If hive <> 0 Then
'Create a dictionary object to store the registry values in.
Set regDict = NewDictionary
If Err.Number <> 0 Then
LogMessage 1, "Creating Dictionary Object"
Exit Function
End If
'Connect to the remote registry.
Set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & hostName & "\root\default:StdRegProv")
If Err.Number <> 0 Then
LogMessage 1, "Creating StdRegProv Object"
Exit Function
End If
'Enumerate the subkey names within the regKey paramater.
objReg.EnumKey hive, rootKey, subKeys
If Err.Number <> 0 Then
LogMessage 1, "Enumerating Registry Keys"
Exit Function
End If
'Ensure the results are an array.
If Not IsArray(subKeys) Then
subKeys = Array(subKeys)
End If
'Read the registry key value for each subkey. Add the results to the dictionary.
For i = 0 to UBound(subKeys)
objReg.GetStringValue hive, rootKey & "\" & subKeys(i), keyName, keyValue
If Err.Number = 0 Then
If Not IsNull(keyValue) Then
regDict(regDict.Count) = keyValue
End If
Else
Err.Clear
End If
Next
End If
On Error Goto 0
results = regDict.Items
GetRegValues = True
End Function
'Name : GetRegistryHiveFromKey -> Get the hive ID from a registry key name.
'Parameters: Input/Output: key -> Registry key name. Hive name will be removed.
'Return : GetRegistryHiveFromKey -> ID of hive of given key name (0 if invalid).
' : -> The hive name is removed from the input key name.
Function GetRegistryHiveFromKey (key)
Dim pos, hive
pos = Instr (key, "\")
If pos = 0 Then
pos = Len(key) + 1
End If
hive = Left (UCase (Left (key, pos - 1)) & " ", 4)
key = Mid (key, pos + 1)
GetRegistryHiveFromKey = Array(0, &H80000000, &H80000001, &H80000002, &H80000003, &H80000005, &H80000006) _
(Int ((Instr("HKCR,HKCU,HKLM,HKU ,HKCC,HKDD", hive) + 4) / 5))
End Function
'Name : NewDictionary -> Creates a new dictionary object.
'Parameters : None ->
'Return : NewDictionary -> Returns a dictionary object.
Function NewDictionary
Dim dict
Set dict = CreateObject("scripting.Dictionary")
dict.CompareMode = vbTextCompare
Set NewDictionary = dict
End Function
'Name : DQ -> Place double quotes around a string and replace double quotes
' : -> within the string with pairs of double quotes.
'Parameters : stringValue -> String value to be double quoted
'Return : DQ -> Double quoted string.
Function DQ (ByVal stringValue)
If stringValue <> "" Then
DQ = """" & Replace (stringValue, """", """""") & """"
Else
DQ = """"""
End If
End Function
'Name : IsoDateTimeString -> Generate an ISO date and time string from a date/time value.
'Parameters : dateValue -> Input date/time value.
'Return : IsoDateTimeString -> Date and time parts of the input value in "yyyy-mm-dd hh:mm:ss" format.
Function IsoDateTimeString(dateValue)
IsoDateTimeString = IsoDateString (dateValue) & " " & IsoTimeString (dateValue)
End Function
'Name : IsoDateString -> Generate an ISO date string from a date/time value.
'Parameters : dateValue -> Input date/time value.
'Return : IsoDateString -> Date part of the input value in "yyyy-mm-dd" format.
Function IsoDateString(dateValue)
If IsDate(dateValue) Then
IsoDateString = Right ("000" & Year (dateValue), 4) & "-" & _
Right ( "0" & Month (dateValue), 2) & "-" & _
Right ( "0" & Day (dateValue), 2)
Else
IsoDateString = "0000-00-00"
End If
End Function
'Name : IsoTimeString -> Generate an ISO time string from a date/time value.
'Parameters : dateValue -> Input date/time value.
'Return : IsoTimeString -> Time part of the input value in "hh:mm:ss" format.
Function IsoTimeString(dateValue)
If IsDate(dateValue) Then
IsoTimeString = Right ("0" & Hour (dateValue), 2) & ":" & _
Right ("0" & Minute (dateValue), 2) & ":" & _
Right ("0" & Second (dateValue), 2)
Else
IsoTimeString = "00:00:00"
End If
End Function
'Name : LogMessage -> Parses a message to the log file based on the messageType.
'Parameters : messageType -> Integer representing the messageType.
' : -> 0 = message (writes to a ".csv" file)
' : -> 1 = error, (writes to a ".err" file including information relating to the error object.)
' : -> 2 = error message (writes to a ".err" file without information relating to the error object.)
' : message -> String containing the message to write to the log file.
'Return : None ->
Function LogMessage(messageType, message)
Dim prefix, logType
prefix = hostName
Select Case messageType
Case 0
logType = "csv"
Case 1
logType = "err"
message = "Error " & Err.Number & " (Hex " & Hex(Err.Number) & ") " & message & ". " & Err.Description
Case Else
LogType = "err"
End Select
If Not LogToCentralFile(scriptLogPath & "." & logType, hostName & "," & message) Then
Exit Function
End If
End Function
'Name : LogToCentralFile -> Attempts to Appends information to a central file.
'Parameters : logSpec -> Folder path, file name and extension of the central log file to append to.
' : message -> String to include in the central log file
'Return : LogToCentralFile -> Returns True if Successfull otherwise False.
Function LogToCentralFile(logSpec, message)
Dim attempts, objLogFile
LogToCentralFile = False
'Attempt to append to the central log file up to 10 times, as it may be locked by some other system.
attempts = 0
On Error Resume Next
Do
Set objLogFile = objFSO.OpenTextFile(logSpec, ForAppending, True)
If Err.Number = 0 Then
objLogFile.WriteLine message
objLogFile.Close
LogToCentralFile = True
Exit Function
End If
Randomize
Wscript.sleep 1000 + Rnd * 100
attempts = attempts + 1
Loop Until attempts >= 10
On Error Goto 0
End Function
'Name : PromptStart -> Prompt when script starts.
'Parameters : None ->
'Return : None ->
Function PromptStart
MsgBox "Now processing the " & DQ(Wscript.ScriptName) & " script.", vbInformation, scriptBaseName
End Function
'Name : PromptEnd -> Prompts when script has completed.
'Parameters : None ->
'Return : None ->
Function PromptEnd
MsgBox "The " & DQ(Wscript.ScriptName) & " script has completed successfully.", vbInformation, scriptBaseName
End Function
'Name : PromptError -> Prompts when an unexpected script error occurs.
'Parameters : None ->
'Return : None ->
'Function PromptEnd
' MsgBox "Error " & Err.Number & " (Hex " & Hex(Err.Number) & "). " & Err.Description, vbCritical, scriptBaseName
'End Function

CPS licensing for all the PRD systems

Hi
I have gone thorough the blog that relates to the CPS licensing, i haven't got the clear view that how this licensing stuff works for my scenario..so kindly assist me with the below scenario...
There are 4 systems for my client like SAP R/3, SAP CRM , SAP B/W and SAP Soltion Manager, now we are planning to go for CPS Tool in order avoid the pitfalls in our batch procesing.if i want to run CPS on all the production systems i mean to say 4 production systems how many server processers are required..and agents and adopters are required, and please sensitize me in terms of Agents , adopters and Server processes like what exactly they are, and for my R/3 Production system they is 1-CI(central Instance) and 4 APP servers , and for Solman there is only 1-CI and for CRM only 1-CI and BW there is 1-CI and 1-APP server , all our systems are running on Windows server 2003 and 2008, even we are planning our CPS to be on 2008 and SQL 2008..so kindly advise me in terms of the licensing like how many adapters and how many agents and how many server processers are realy required. is it required to pay anything in order to integrate CPS with Solution Manager...Thanks.

Hi Phaneendra,
CPS has a very simple licence model. The only licensed item on the SAP price list is called a Process Server.
For each SAP instance where you want to control jobs you need a CPS Process Server. In your case: R3, CRM, BW and Solman is 4 Process Servers.
Then you need to look at any non SAP events that you want to monitor or control. Like maybe an FTP file event or some data load comming from a non SAP application. On every server where you have these non SAP events you need to configure an additional Process Server.
Every Process Server includes a license for 1 Production environment and 3 non production environments (dev, test, fail over)
For the Solution Manager Adapter you do not require a Process Server License but if you have Solution Manager events that you want to control you have to configure a Process Server.
Does this answer your question?
Let me know if you need additional support.
Regards,
Richard Lock, Redwood Software.

Service desk RFC destination in the Satellite system

HI All,
can any body tell me the RFC destination that is to be maintianed in the satellite system so that the message reaches the solution manager service desk.
I am creating messages they are being send to the service desk successfully but are not visible when I go into the service desk of the solution.
But they are visible through the transaction code CRM_DNO_MONITOR .Can any body help the RFC destination to be maintaned in the BCOS_CUST table so that the message reaches the Service Desk.]
Currently I am using the RFC destination to the service desk client in the solution manager ie SIDCLNT200
Thanks in advance
Regards
Amit

Hi Amit,
I think your expectation is not correct. I understood, you can create a message in a satellite system and you can see the ticket in SolMan service desk. Then everything is configured correct. What you are now looking for is to see the ticket in a solution when the sat. system is part of the solution. This is not working. If you create out of a solution a service desk ticket, these ticket get a special attribute that they belong to this solution, all other tickets can not be selected by a solution.
Sorry but I am quite sure that it is working like this.
There is only one option, that you define special variants so you can see only tickets from special systems, but these variants can not be assigned to a solution.
Regards,
uDo

Create user both in the satellite system and in solman

Hi
I wonder if I need to open all my user's that are in the satellite system (ECC) in the solution manager for the purpose of create support message or I can only create them as BP?
If I don't need to open them, What is the proper way to configure the RFC?
Best regard's
Lior Grinberg

Hi,
in a normal service desk scenario you do not neet to create users in Sol Man. You just create business partners. If you want the users to logon to Sol Man and edit a document then they also need a real user there (linked via BP - employee):
For creating messages from satellite system you usually maintain RFC destinations from Sol Man (SMSY) to the connected systems. Then you use the generated *_BACK destination in your satellite system and add it to table BCOS_CUST.
All these steps and many more are described in IMG in Solution Manager.
Regards

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

CCMS alerts of the satellite system

Copying CCMS alerts available on the satellite systems to Solution Manager. Is this functionality workable to monitor from Solution Manager?
Cheers
Roger

Yes.. Please search for the documents related to System Monitoring funcationality in SolMan. You can get a lot of documents about that in SDN. As well as seach for a .sim file for this in service.sap.com/rkt-solman.
Rajeev

Report Column Attributes Does Not Display All the Column Names

Good Morning,
I have an interactive query Select * from table_name. I have to select * since my query returns well over 32k. I have 162 columns in the query. On the screen, all the columns are displayed; however, on the report tab, only about half of the columns are displayed. The rest are cut off. I need to be able to go into these field's attributes. Is this an APEX bug, or am I just missing something.
Regards,
Kelly

Hello Tony,
I can't break them out because APEX is limited to one interactive report per page. There is need to be able to do computations on the data, which interactive reports allows. The data is all statistical.
Regards,
Kelly

MBP having Kernel Panic (Crash) all the time due to Wireless card firmware.

Hi all,
I am desperately needing helps from the experts here now. I have the latest santa rosa Macbook Pro. It has been crashing on me lately due to the wireless card firmware. I have run all the latest updates from software update including the AirPort.Atheros firmware update. I have tried to reformat the hard drive and installed a fresh and clean Mac OSX. The crash still persists before AND after the AirPort.Atheros firmware update. I mean I was not having this issue when I first bought the computer while others were whining all over the internet about this problem. When the fix came out, everyone
s problems seem to be solved but my problem arose . A recent Kernel panic crash log is as following:
panic(cpu 1 caller 0x0035D113): freeing free mbuf
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x364539f8 : 0x128d08 (0x3cc0a4 0x36453a1c 0x131de5 0x0)
0x36453a38 : 0x35d113 (0x3ecf98 0x0 0x10 0x0)
0x36453a58 : 0x35d4b3 (0x4884fe00 0x0 0x246 0x1)
0x36453a78 : 0x51b56695 (0x4884fe00 0x0 0x20 0x4ee1d00)
0x36453be8 : 0x51b569d4 (0x3493c2c8 0x3493e148 0x36453c58 0x1416ad)
0x36453d38 : 0x51b62d85 (0x3493f004 0x0 0x4b285c 0x4c2ec070)
0x36453eb8 : 0x51b33d9a (0x3493c4c0 0x51bb8da4 0x36453ed8 0x19e23a)
0x36453f48 : 0x51b324a9 (0x4ce1004 0x0 0x36453fc8 0x19a001)
0x36453f78 : 0x13d7d9 (0x4ce1494 0x4ce1004 0x0 0x0)
0x36453fc8 : 0x19ad2c (0x0 0x0 0x19e0b5 0x5b3b3e0) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPort.Atheros(235.9.3)@0x51b31000
dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x4c63c000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x465e6000
dependency: com.apple.iokit.IO80211Family(162.1)@0x4c73b000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
A way to know that the crash is gonna happen is that the internet stops working and as long as I click on the wifi icon on the menu bar, The crash occurs. Could someone please help to put me out of misery please . Thank you so much for reading this and any suggestions are greatly appreciated.
Thank you
Have a nice day.

i would try this in a test user to see if the issue occurs (more than likely it will)also i would reset the smc and the pram
(test user) go to the apple then system preferences then accounts then in the bottom right hand corner you will see there is a lock click it and put in the password for the computer then click ok then click the plus sign and create the test user make sure that you check the box that says allow user to admin the account then click create account (if a message says something about automatic login click keep) then click the apple and log out then login to the other user.
(smc) you shut the computer down then you unplugg all the cables from the computer then you take the battery out with the battery out you hold the power button down for five seconds then you put the battery back then plug in the ac adapter then start the comptuer up and then plug everything else back in
(pram) you restart the computer holding down the apple option P and R keys till you hear the start up chime twice
if that does not work i would boot to the install disk one holding c and then click utilites from the top and select the mac hd and then verify disk and repair disk
if the issue still occurs then i would back all of the information on the computer up and erase and install
hope this helps

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Report to pull kernel patches of all the satellite systems

Similar Messages

Maybe you are looking for