Report to Report Interface - Required Entry flag

Hello Experts,
I have defined RRI from a BEx query to WAD template in RSBBS. In the "Assignment Details" I have selected Selection Type - "Single" and Required Entry "X". I expected that if I select "Jump" without any filter on that particular characteristics the RRI would not be offered or I get some kind of error. But as far as I can recognize the flag "Required Entry" has no effect.
Can someone explain me what is the purpose of this flag?
Regards
Jiri

Hello,
thank you very much for the referenced documentation. The behaviour you describe in your reply is exactly what I expected it to be but it is not.
I have two queries and two WEB7 applications built on them. Both the queries refer to the same cube. The first query (and WEB report) is an overview by the Project Responsible Person. The other one is the detail for Project Responsible with the Project Responsible as required variable in the static filter of the query.
If I select "Goto" on a particular Project Responsible then the selection is properly passed to the second query variable and the report is displayed. But if I select "Goto" on the summary line, I understand from the documentation, that the detail report should not be in the "Goto" list or that the user get some message like "Selection of the characteristics Responsible Person is required" but does not - the latter report is run anyway and changing the flag "Required Entry" on and off seems to have absolutely no effect.
Perhaps this option is applicable for RRI to R/3 only. I would be very grateful if someone can test (or alreade have tested) whether it works in their environment.
Regards
Jiri

Similar Messages

Info required on Report Report Interface

Hi Experts ,
Can anyone please provide inputs regarding the Report Report Interface . Any document will be highly appreciated.
Regards
Garima

Hi Garima,
Links ................
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=3353440
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=2762562
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=1846978
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=180080
The steps to create RRI
1)Goto T code RSBBS
2)In the Sender Query -give the Query name
3)Press Create tab which is there on the Right Top
4)It will as for a list select the Query name in the Bottom
5)and Press OK.
6)Come back to the main Screen os RSBBS and Select the Receiver Query and click Assignments.
7)Make them objects as Delete.
8)Save and Execute the Query ,Sender Query.
9)Right Click on the Query ,we will find GOTO Tab ,Drill down further
we can view the Second Query.
10)we can view the Second Query through first query
Hope it Helps
Get bak if u have any issues
Rgds
SVU

Report Report Interface: No applicable data found

Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
Martin

Hi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit

Report Designer - Report-Report-Interface (RRI)

Hi,
if is possibility to insert a Report-Report-Interface in Report Designer?
If yes, can you please give me step by step procedures for Report-Report-Interface in Report Designer?
Thanx in Advance.
Wolfgang

There are also some basis tasks which need to be complete before the servers can communicate.
You need to maintain entries in table TWPURLSVR and ensure that web application server is installed and running correctly.
Then you can maintain sender/receiver settings in RSBBS. You will need to create new settings that link the query/cube to a specific report/transaction in ERP.

Report to Report interface - restrict query results

HI Experts,
following issue. i'm using the Report-Report interface to jump from a report to a very detailled report.
my concern is if the user don't filter the first report to a specific Item the receiver report can explode trying to get all items.
is there any technical possibility to restrict this i.e. display message or check the number of items selected?
note: i'm working with BEx analyzer.
thanks to all,
regards,
Younes

HI,
there is a mandatory variables for time restriction.
but not for the material ids so this was the requirement.
are there any other possibilities?
thanks,
regards,
YNS

Report to Report Interface Error

Hello,
I have a summary query which needs to go to detail query. I used the RSBBS transaction to designate the sender and receiver query. I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available. However, when it tries to transfer, I get the following error. I know these queries are saved and active. I can run them each independently but cannot get the Report-to-Report Interface to work. Any help would be greatly appreciated.
Thanks,
Lynda
error:
query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
because it does not exist on the BW Server.

Hi Chandran,
Thank you for your reply and the two links. I am reviewing the assignment details and have a few questions. I currently only have 2 fields assigned - as variables - material and plant.
Everything else is set to generic.
My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
The summary report comes up with correct data.
Material Plant UOM Yearly Budgeted Amt Jan/Yr Feb/Yr March/Yr etc
The user then wants to drilldown to detail behind a month. i.e. Jan/Yr
I created the detail query to ask for material and plant which then provides
Material Plant Purchase Order Main Vendor Freight Vendor UOM Qty Recvd Price and Freight Amoutn
There will be multiple Purchase Orders.
One thing I am not sure about transferring fields. Do I need to designate the month/year as a variable in my detail query along with material and plant? I am a bit fuzzy as to the whole process.
Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
Thanks for your patience and help...
Lynda

Bex report to report interface dynamically based on Value in the query

Hi,
Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
For example my query has the below data
Plant | KPI | Quantity
P1 | A | 20.00
P2 | B | 25.00
When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
Is this possible in Bex report to report interface or any other way.
Please suggest
Thanks in advance.

Hi
we have RRI in sap bw. ( TCODE RSBBS.)
Below article will enlighten you about this topic .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
hope this helps

Using Report-to-Report Interface (RRI) in BEx Report Designer?

Dear experts,
I would like to know if it is possible to use Report-to-Report Interface in BEx Report Designer?
From what I read from this article
[(Creating Formatted reports using BEx Report Designer)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?quicklink=index&overridelayout=true], the RRI capability of query is not supported in BEx report. So is it true? And are there any workarounds to enable/emulate RRI capability in BEx Report?
Thanks in advance.
Regards,
Joon

Hi Joon,
It is possible to make RRI in BEX Report Designer by using Transaction Code - RSBBS .
Here you need to give the Target Query and Source Query names and than you can easily connect two reports or two levels of same report.
For further step wise description please check the below SDN document :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
I hope this document helps to sort out the queries.
Regards,
Akanksha

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

CO 1SRJ-001: Too many line items selected via report interface

Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,

Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine.

(Invoice aging report = Cash Requirement Report)

hi,
The total balance for cash requirement report for specific supplier not match with the balance for Invoice aging Report also for specific supplier
The expected behavior:
It must to match the balance between the two reports
(Invoice aging report = Cash Requirement Report)
But this not happen when I compare the balances between the report’s
Kindly , Advise .
Thanks

Hello.
The Invoice Aging Report shows unpaid invoices, which may be not due yet. Use the Cash Requirement Report to forecast your immediate cash needs for invoice payments.
Octavio

Report in required currency - positions that are reported in TPM12

Hi,
User is looking for a report that will convert balances in original currency to a currency specified by the user based on the u201CMu201D rate for the u201Cas ofu201D (key date) date of the report. Basically they are referring to TPM12/TMR1 and would like to see the positions converted to whichever currency they would like to. I am looking to execute some of the standard transactions that report positions, like, TIS1 (Overview positions), S_ALN_01001154 - Simulated Valuation, etc., but couldn't find the output converted in the currency given in Display currency / Evaluation Currency in the input screen.
Experts, can you through some light on this and tell if there is any such report?
Let me know if you need any further info.
Kumar

Hi Prasad,
Thanks for your prompt reply. First of all, we are looking at if there is any standard transaction that will give the report as required. The client is not interested to use SAP query as there are some authorization problems to transactions SQ01, SQ02, etc. None of the user have access to these transactions.
If standard report is not meeting the requirement we may need to for customer development. But before doing that I am trying to find out if it is possible in any of the existing standard reports.
thanks,
Kumar

Report-Report Interface ECC Reports

Dear all,
I'm making a report using report painter (TCode GRR2) and now I need to drill-down to the documents. I think that I can build it via report-report interface.
So, have I to use RSBBS tcode to built it? In fact, I need to built a drill-down to a ECC table, Is the process the same?
Could anybody explain me steps to follow to built it? thanks in advance.
Kr
Arriamu.

You assign drill-down report at report group level (GR52).
Report/Report interface > Configure, use the "insert row" icon to assign reports.

Which Table will have 'Report to Report Interface (RRI)' Details?

Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.

Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna

Report-Report Interface from BW to Project Systems

I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
Thanks
Robert Williams
You cannot use the report-report interface to call up report RKPEP000
Message no. HF 800
Diagnosis
Line item report RKPEP000 is not suitable for the report/report
      interface.
Procedure
Always enter RKPEP000 as the receiver report for project line items in
      the report/report interface. This program uses the transfer parameters
      to determine which line item reports can be accessed.

Hi
I dont know whether you have solved the problem or not yet
But i came up with the same issue....
Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
OSS Note : 356166
Thanks

Report to Report Interface - Required Entry flag

Similar Messages

Maybe you are looking for