Report to Report Interface warning msg

Hi,
I am getting "Incompatible for target selection for fiscal year" warning msg in SAP BEX.I am using same variable in my source and target system to select fiscal year.
How to supress this warning message?
thanks
venkii

If your report is working fine as per expectation in RRI, and your requirement is to supress the warning message, you can set the global setting of the workbook to supress any warning messages.
Question:
Do you have any customer exit on this variable?
- Danny

Similar Messages

Report to Report Interface Error

Hello,
I have a summary query which needs to go to detail query. I used the RSBBS transaction to designate the sender and receiver query. I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available. However, when it tries to transfer, I get the following error. I know these queries are saved and active. I can run them each independently but cannot get the Report-to-Report Interface to work. Any help would be greatly appreciated.
Thanks,
Lynda
error:
query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
because it does not exist on the BW Server.

Hi Chandran,
Thank you for your reply and the two links. I am reviewing the assignment details and have a few questions. I currently only have 2 fields assigned - as variables - material and plant.
Everything else is set to generic.
My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
The summary report comes up with correct data.
Material Plant UOM Yearly Budgeted Amt Jan/Yr Feb/Yr March/Yr etc
The user then wants to drilldown to detail behind a month. i.e. Jan/Yr
I created the detail query to ask for material and plant which then provides
Material Plant Purchase Order Main Vendor Freight Vendor UOM Qty Recvd Price and Freight Amoutn
There will be multiple Purchase Orders.
One thing I am not sure about transferring fields. Do I need to designate the month/year as a variable in my detail query along with material and plant? I am a bit fuzzy as to the whole process.
Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
Thanks for your patience and help...
Lynda

Bex report to report interface dynamically based on Value in the query

Hi,
Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
For example my query has the below data
Plant | KPI | Quantity
P1 | A | 20.00
P2 | B | 25.00
When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
Is this possible in Bex report to report interface or any other way.
Please suggest
Thanks in advance.

Hi
we have RRI in sap bw. ( TCODE RSBBS.)
Below article will enlighten you about this topic .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
hope this helps

Using Report-to-Report Interface (RRI) in BEx Report Designer?

Dear experts,
I would like to know if it is possible to use Report-to-Report Interface in BEx Report Designer?
From what I read from this article
[(Creating Formatted reports using BEx Report Designer)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?quicklink=index&overridelayout=true], the RRI capability of query is not supported in BEx report. So is it true? And are there any workarounds to enable/emulate RRI capability in BEx Report?
Thanks in advance.
Regards,
Joon

Hi Joon,
It is possible to make RRI in BEX Report Designer by using Transaction Code - RSBBS .
Here you need to give the Target Query and Source Query names and than you can easily connect two reports or two levels of same report.
For further step wise description please check the below SDN document :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
I hope this document helps to sort out the queries.
Regards,
Akanksha

Which Table will have 'Report to Report Interface (RRI)' Details?

Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.

Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna

Report is going in warning r12

Hi expert,
many times my users complain me all reports is going in warning. in this case i check the manager if the all manager are active and the manager's actual and target are different. i down all manager and after down all manager completely run the cmclean.sql script. and up the manager.
the issue is solved.
but many times i watch managers are working well and actual and target are same. till all reports are going in warning. in the same case i repeat the same way to solve the problem.
i want to know is there any permanent solution for this error or any other method to solve this type of problem in daily cases.
this type of issue raised on my production database..
also plz suggest me how can i tune my ebs r12 production database?????????
thanks & regards
pritesh ranjan

Hi,
many time when i down the manager all manager are down successfully but some time FNDLIBR (internal manager) not down after wait longtime (15-20 min)
Some time in the sense, are you able to figure out the instances this would occur or is it randomly.
How are you finding the FNDLIBR run? Is it through: ps -ef | grep FNDLIBR
If yes, I suggest you to give some time as the process kill take some time plus as long as your shutdown script ends up with a value '0' (zero), you are good.
then i kill the FNDLIBR manger in test instance and then start the manager and the test server work well.
Assuming you have shutdown the Application (which will include CM most importantly to our subject), and still if it hangs you may use the force kill option from OS. Since you have already performed the appropriate way of shutting down. But I also suggest you run the "Apps shutdown script" again.
i want to know can i kill FNDLIBR manager when it is not going to down after wait (15-20 min) in production instance. if i do such type of activity in production instance is it leave any bad impact on production instance.
In addition to my comments above, I suggest you to check for CM log files and also check the below note to be on safe side:
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues (Doc ID 171855.1)
Thanks &
Best Regards,

Report to Report Interface - Pass Key Figures

Hello,
I have setup a RIR interface on a Query to jump to another query for detailed inforamtion - works perfect.The issue I am facing is,there's a particular Keyfigure value in the sender query (derived from a Cube) which does not exist in the receiver query(ODS). Is there a way to get this information across to the Receiver Query ?
Thanks,
hdev

Hi, Hdev.
Do you have any documentation on how the Report to Report Interface works? If not, could you explain briefly what it is? Much appreciated!
Thanks,
Sarah-Jane

Report to Report Interface (RRI)

Hi,
I had a Query on a Cube (Multiprovider) and I had a query on DSO
How can i perform Report to Report Interface (RRI) for this two queries
Thanks

Go to transaction RSBBS in the BW back end (i.e. via SAP Logon pad).
Add the name of the query based on the MultiProvider in the Sender box.
Click create.
Select Report Type BW BEx Query (default selection).
Enter name of query based on DSO in Receiver Object. Add the description for the query that you want to appear in the Goto menu in BEx Analyzer.
Click apply.
Save.
Done!

Report-to-Report Interface problem with default values

Hi all.
I have RTR interface where target query has default values, so when I jump to target query it doesn't return whole data because of this default filter.
Is it possible to remove this default filter in query in case it is executed through Report-To-Report?
I still need this default filter then I execute target query separately.

Dear Gediminas,
Make sure that you have same infoobjects which are having default values present in the 2 queries.
After createing settings in RRI...select that setting.....click on ASSIGNMENT DETAILS tab...
Assign Type as how they are in 1st query...
Assign selection type as how they are in 1st query...
Assign GENERIC to the rest of the fields..
Cintinue
Save.
Assign points if it is helpful.
Regards,
R.

Report to report Interface issue in Web Analyzer

Hi,
Report to report interface for one of the queries works fine in Development ,Quality and Production systems through BEx Analyzer ,where as it shows the wrong values in receiver query when we try to use it through Web Analyzer of production.In production Bex Analyzer it works fine and even it works fine in web analyzer of Development and Quality systems and the issue is with RRI in Web Analyzer of Production system only
                Please help me to solve this issue.
Thanks & Regards,
Madhu.

Hi ,
Youi can check this tables
                    MKPF               material document
     MSEG               material document (item level)
                    RESB                                Material reservations
     RKPF                                 header
Rergards
SANIL

RRI Problem in EP - An error occurred with the report to report interface

I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?

Hi Frank,
What was the solution?
Regards,

Scenario for report to report interface

hi experts
i want to know how you people used R/ RI report to report interface in your project, explain me ur experince working with RRI, thank you

Hi.........
1)Suppose amount of data in an infocube is very huge........definitely it will detoriate the performance of the query....it will slow down the execution of the query......until you have implemented BIA...or aggregates.....
To overcome this situation.....u can use RRI.......Rather than storing all data in a single infoprovider......and trying to execute all these data...you can seperate the data and store in a number of infoproviders............and perform RRI from one infoprovider to another for detailed information......
2) You also hav the option to jump from one system to another using RRI........like from BW to ECC......
3) It also helps to layer your data....summary data in one infoprovider........and detailed data in another infoprovider.....connect them using RRI....
Hope this helps........
Regards,
Debjani......
Edited by: Debjani Mukherjee on Nov 7, 2008 2:38 AM

Documentation of Report to Report Interface

Greetings,
Does anyone have documentation that explains the Report to Report Interface? If not, can anyone explain briefly how it works?
Thanks,
Sarah-Jane

Hi Sarah,
Please see here:
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/content.htm
Hope this helps...

RRI (Report to Report Interface)

Hi all
i search in forum and i got a ans., but i'm not able to understand this., what is reporting to report inter face(RRI)
t-code RSBBS., when do we use., can u pls explain me this one and as wel give on scenario Can u pls give brief and
step by step scenario
Kind

Hi krisna,
Report-To-Report Interface is used to navigate from One Report To Another Report. Say for example Your Manager wants to view Yearly report(YTD) which gives sales for Jan, Feb, Mar etc.... he aswell wants to view detailed monthly report for any month say for march..... by right clicking on YTD report he should get Monthly(MTD) report.....so this can be achived by RRI.
In RSBBS you will have to assign the Source query(in this case it is YTD report) and Target query(in this case it is MTD report). Means the user is able to view YTD and MTD at same instance. Its just like drilldown between reports. Let me know if u have any doubts?
Regards,
Vishnu.

Warning Msg during RRI

When I'm trying to jump from a source report to target query via RRI, i get a warning msg (thought the query runs). I want to supress the msg.
I tried supressing the msg in source query, target query and both of them together. Still the msg is being displayed. Where do I need to supress the msg if its during RRI process?
The variable and the hierarchies being used for cost center is the same in both the queries. Any thoughts?
Error msg:
Invalid filter on 0COSTCENTER: Filter changed
    Message no. BRAIN502
Diagnosis
    You tried to filter on a characteristic with active presentation
    hierarchy by a node of another hierarchy.
    This can only be done by switching the hierarhcy or for example by using
    the report/report interface.
System Response
    The filter is not evaluated for the characteristic, but removed instead.
Procedure
Procedure for System Administration

Thanks guys, I figured it out.
Message was edited by:
        voodi

Report to Report Interface warning msg

Similar Messages

Maybe you are looking for