Report to rerun VF02

Dear Friends,
I have a maintained a new billing output condition record today, now i want to issue this output for the billing documents generated from last month to yesterday.
I cant use VF31 because those past invoices doesn't have this output when they were saved.
If these billing document needs to find this newly setup condition record then i need to open the billing document in VF02 and just save, sothat the billing will find the output type.
so can any body tell me is there any automatic way instead of going with BDC program.....
Should you need further information, let me know
Thanks in advance
SUN.

Hi,
I don't think so.
You can get all Billing documents for that period from tx: VF05N.
Then better do it with a LSMW program for those Invoice numbers.
Best regards,
Anupa

Similar Messages

Current date in oracle report

The field in the Oracle report footer has the source as current date. It is not showing the current date and time when the report is rerun. What is the solution for this problem. How to refresh the footer? I am new to Oracle reports. Please help. thanks

What is the report version and what format mask are you using for the date/time?

Script to resubmit failed report jobs

Hi,
Anyone know, how to rerun ( resubmit) failed jobs in report queue. There is an option, where we can rerun the failed report using IAS admin console. But I have bulk of falied reports to rerun. Can anyone help me. Any script , command or method ??
Thank you.

Hi Kenny,
I posted the following file to the NI outgoinng ftp site-- you'll have to grab it in the next few days before it gets automatically wiped off.
ftp.ni.com/outgoing/CompanyName.zip
Look for the "Using ResultsList Menus.doc" file in the main "CompanyName" folder, it will have installation instructions and step by step how-to-use information. Also feel free to email me with questions at [email protected]
Brad Turpin
DIAdem Product Support Engineer
National Instruments

To close the reports which are running in Reports Backtground Enginee

We want to refresh the report but it is not working. Is it possible to refresh the report or we have to close the report and rerun it? Can we close the report which is runnign in the Background Enginee?
Please Help Urgently. Thanks for coordination.

hello,
you will have to re-run the report. by the time, you see the output, the report has been run, the data has been fetched and formatted.
regards,
the oracle reports team --pw

Configure a SSRS Data Alert once for all parameters

Hi,
while BOL mention "[...] If the report is parameterized, you might need to run the report using different parameter values to ensure the data that that you are interested in appears in the report. After the report is open, you click the
New Data Alert option on the Actions menu on the report toolbar to open Data Alert Designer [...]"
is it possible, or is there a work around, to configure a data alert that lists all parameter members?
i.e. I've a report with a parameter that is "Customer" that contains more or less 1000 names. How can I create a single data alert for each Customer? --> i.e if the customer has a payment delay greater than n days?
Thanks in advance, Davide

Hi Davide,
Per my understanding that you want to create only one Data Alert for all the parameters in the lists, right?
As you know that if the report is parameterized ,only after the report is open then you can click the New Data Alert option on the Actions menu on the report toolbar to open Data Alert Designer and create the Data alert.
So by design you need to first select the parameter to filter the report and then create the “New Data Alert” . When you choose a data feed, the data from the feed displays in a table with rows and columns in the alert data pane of Data Alert Designer which
is the filtered tables data based on this parameter, that means the current version not support to set only one Data Alert for all parameters at once through the setting of the “New Data Alert” , The parameter values you chose to run the report are saved
in the alert definition and will be used when report is rerun as a step in processing the alert definition. To use different parameter values, you must create a new alert definition.
I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
More details information about the date alert for your reference：
http://msdn.microsoft.com/en-us/windows/gg492254(v=sql.100).aspx
http://msdn.microsoft.com/en-us/library/gg492251.aspx
Thank you for your understanding.
Regards
Vicky Liu

Reinstalling Flexsync in order to troubleshoot install

I am troubleshoot an issue with our Flexsync reports not opening, we are using out of the box reports. We have sense upgraded to the Hot Patch 6.1.1.1, however is there a method to do a fresh install of flexsync application? I have gone back based on the install guide and rerun the application FlexSyncFoundationSetup.exe file, however it shows that it is already installed. I have also gone back to exported the reports and rerun the sql file that was regenerated. I know that it is working successfully in our Dev environment which is also on 6.1.1.1. Would it harm anything by rerunning applyscripts again or would that cause further issues.

Jason,
sorry for the delayed response. when you upgrade to 6.1.1.1, you need to run the FlexSync Foundation and FlexSync Formulation installers located in EP 3.3, including applyscripts. If you already have FlexSync installed, this will perform an upgrade for you.
There is an issue with the applyscript that break the translations in the sitemap to display 'no translation found for ...'. We are correcting this in EP 3.4, but in the meantime, after you run applyscript, you can execute the following query to correct it.
update commonXLAExtensionCacheItem
set fkparent =
     (select pkid from commonXLAExtensionCache where name = 'frmMaster/ctlNavMenu1')
where id in (
     'lblFlexSync'
     ,'lblSingleFormulaPerExp'
     ,'lblFSImport'
     ,'lblProtoExperPerExp'
     ,'lblFormulaExportRpt'
     ,'lblSingleFormulaQtyExp'
     ,'lblFormulaImportRpt'
     ,'lblProtoExperQtyExp'
     ,'lblFSExport'

9i patch does not want to install

Hi,
I installed patch 9.2.0.7.1 patch on 6 servers without problem. When I got to the PRD system, it fails with 'Applications running...stop before continuing'. No service or application is listed in the pop-up box.
I shut down both App servers. Restarted DB server. Stopped the necessary services and just about all other services as well. STILL I get the pop-up telling me there are applications running.
What could be the cause?

on Windows 2003:
open a command box and run following commands:
<i>tasklist /m | findstr -i oci
tasklist /m | findstr -i ora</i>
if one of them is reporting files, rerun the command
tasklist /m > opendlls.txt
edit opendlls.txt and search for the DLL still loaded.
you will find the process name and the process ID.
If the process is started as a service you might find
tasklist /svc
helpfull which enables to you connect the process to a servicename.
in most cases the Distributed Transaction Coordinator (Service) is the problem.
regards
Peter

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Report rerunning

Hi everyone,
I have a problem with generating the delimited output. It runs the report again and it takes a lot of time. Does anyone know how to generate to a delimited file without rerunning the report again
null

Make sure you're using the latest SP:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Consider adding latest FP also:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Make sure you are disposing of the report object once you are done with it and before you re-run it with new parameters (.close, .dispose).
Test without the combo box. Let the report prompt. Can you reproduce the behavior now? If not, try to supply the parameter values via a text box. Can you reproduce the issue now? E.g.; is it the combo box that is the issue, or the report?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to rerun the failed report subscription.

Hi,
Is there any way to rerun the report subscription jobs based on job status.
Version: SSRS 2008
Regards,
Vaishu

Hi Vaishu, I wrote this sp to make the job on our server. Hope this help people with the same problem.
USE [ReportServer]
GO
-- ================================================
-- Template generated from Template Explorer using:
-- Create Procedure (New Menu).SQL
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
-- This block of comments will not be included in
-- the definition of the procedure.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Roberto Barcia
-- Create date: 04/17/2014
-- Description: Subscription failed control and re-running
-- =============================================
ALTER PROCEDURE [dbo].[sp_FailedSubscription]
-- Add the parameters for the stored procedure here
-- How to test this store procedure
EXEC [dbo].[sp_FailedSubscription]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Create temp table, control if exist
IF OBJECT_ID('tempdb..#Failed') IS NOT NULL
BEGIN
DROP TABLE #Failed
END
CREATE TABLE #Failed (id int, NewJob nvarchar(100))
-- Insert Failed subscription into the temp table
INSERT INTO #Failed (id, NewJob)
SELECT DISTINCT ROW_NUMBER() OVER(order BY j.Name) AS id,
'EXEC [msdb].[dbo].[sp_start_job] @job_name = ''' + CAST(j.Name AS varchar(40)) + '''' AS NewJob
FROM msdb.dbo.sysjobs j
JOIN msdb.dbo.sysjobsteps js ON js.job_id = j.job_id
JOIN [ReportServer].[dbo].[Subscriptions] s ON js.command LIKE '%' + CAST(s.subscriptionid AS varchar(40)) + '%'
WHERE s.LastStatus LIKE 'Failure sending mail%';
-- VAR Declaration
DECLARE @TotalFailed int = (SELECT COUNT(*) FROM #Failed)
DECLARE @CurrentFailed int = 1
DECLARE @FailedId int
DECLARE @SQL varchar(1000)
-- Executing Failed Subscription again
WHILE @CurrentFailed < @TotalFailed + 1
BEGIN
-- Get datta
SET @FailedId = (SELECT Id FROM #Failed WHERE Id = @CurrentFailed)
SET @SQL = (SELECT NewJob FROM #Failed WHERE Id = @CurrentFailed)
-- Execute job
EXEC (@SQL)
-- test
-- PRINT @SQL
-- next one
SET @CurrentFailed = @CurrentFailed +1
END
-- test
-- PRINT @TotalFailed
-- SELECT * FROM #Failed
-- Drop temp file
DROP TABLE #Failed
END
GO

Post OSD deployment advertisment status report not show succeeded. Report show "Will Not Rerun"

Hi,
When deploying image with SCCM 2007 OSD and deployment finish successfully, in report "Status summary of a specific
task sequence advertisement" status for deployed machine is not successfully but show "Will Not Rerun"
I have hundred of machines to deploy and i must click on every machine in report to verify if task was finish successfully.
Please help
Thanks
hrvoje

One more thing. If I remove machine from collection immediately after task start on this machine, status in report show successfully after task was finished. And in console there is no obsolete record for this machine. ?!?!
hrvoje

Rerunning Recurring Reports for Crystal X from Business Enterprise XI

I have several reports attached to a calendar but no date was selected on the calendar so no reports ran. I tried putting today's date on the calendar prior to the sceduled time but they did not run. Is there a way other than manually to get these recurring reports to run today?

you could try and reset the cms. wouldn't recommend if it is a production environment

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Std Report for incomplete billing document

Dear experts
I want to get the incomplete(such as price error....) billing document in SAP for a secifical customer within a cycle and so on.
Does it have any standard report to implement it?
TKS!

Dear Stephen,
Try with these options.
Go to VF05 transaction here you keep radio button option on open billing documents then execute now system will give list of all open i.e not at released to accounting , billing documents.
You go to VF02 transaction from the billing document field you press F4 then you select match code Billing document still to be passed to accounting.
I hope this will help you,
Regards,
Murali.

Report preview and printing performance issues in CRXI R2

Hello to all,
We have successfully upgraded a corporate Web reporting site from CR8 to CRXI R2 Server SP3 VS2005 Asp2. Using managed reports, and native Oracle data access, performance has greatly improved. The CRXI site displays the first page in half the time as CR8. These are often very large reports.
The problem we are having is when you try to print, export, or just page thru a report in previewer. It takes as long to go to page 2, or to bring up the print dialog screen as it did for page 1 to display in the first place. This is drastically different from the performance on CR8. On the old site, when a report displayed, you could flip thru it like a Word document. Hardly any pause at all. Clicking on the printer icon brought up the print box immediately.
Is there a way to tell the 'CrystalReportsViewer' to load all pages before showing the first page?
If not, is anyone aware of a third party replacement for the CRV?
Any help would be greatly appreciated.
Joe Early

Hello Joseph,
What you're seeing is essentially expected behavior for a CR Server (BO Enterprise) based report. When you try to page through a report or print it you're basically rerunning the report on each button click.
To get around this behavior you can put your Report Object / InfoStore object into session and view, page, or print the session object from the viewer.
You can review [Business Objects Note 1203389|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001203389] for an example with the Crystal Reports .NET SDK. You'll want to add check for the session on post back, etc. but the code should give you an idea of how to get started.
Sincerely,
Dan Kelleher

Report to rerun VF02

Similar Messages

Maybe you are looking for