Report to show all superiors of an employee

Dear Group members,
My client wants a report to show all the hierarchial superiors of an employee. For eg- his  superior,his next superior and so on to to the chief officer. Is there any report for this scenario

Hi kaustubh,
Try report RHSTRU00 with evaluation path O-S-P.
Regards,
Dilek

Similar Messages

  • Vendor report that shows all vendors missing tax id information

    I would like to create a report that shows all vendors that are missing the tax id information.  Please direct me on where to go.
    thx
    Trace

    Dear,
    Enter T-code MASS.
    Select Object Type LFA1 and click on execute button.
    Than click on Fields tab, Find your required field and click on execute button.
    Than enter vendor list for which you want to find out the list.
    And click on execute button.
    Regards,
    Mahesh Wagh.

  • Summary report to show all the software components and version installed

    We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
    Thanks!

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Report to Show All Machines with ANY Deployment Failures

    I need to generate a report, daily, that displays all machines that have
    any kind of an deployment failure. This list will then be used to generate tickets for consultants in that area to check on them.
    I know I can look at specific deployments and see which machines show up as failed, but I am not seeing a report that shows all machines that have
    any kind of a failed deployment. Does one exist, or will I need to create it?

    you can try this report to list all failed deployments(only for applications but not packages).
     select
    all
    SMS_AppDeploymentAssetDetails.AppName as 'App Name',
    CASE WHEN SMS_AppDeploymentAssetDetails.AppStatusType = '1' Then 'Success'
    when SMS_AppDeploymentAssetDetails.AppStatusType = '2' Then 'In Progress'
    when SMS_AppDeploymentAssetDetails.AppStatusType = '3' Then 'Requirements Not Met'
    when SMS_AppDeploymentAssetDetails.AppStatusType = '4' Then 'Unknown'
    when SMS_AppDeploymentAssetDetails.AppStatusType = '5' Then 'Error'
    else 'Unknown'
    End as 'App Status Type',
    CASE WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '1' Then 'Compliant'
    WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '2' Then 'Non-Compliant'
    WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '4' Then 'Error'
    WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '6' Then 'Partial Compliance'
    else 'Unknown'
    End as 'Compliance State',
    CASE WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent  = '1' Then 'Install'
    WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent  = '2' Then 'Uninstall'
    WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent  = '3' Then 'Preflight'
    else 'Unknown'
    End as 'Deployment Intent',
    SMS_AppDeploymentAssetDetails.DTName as 'Deplyoment Type Name',
    CASE WHEN SMS_AppDeploymentAssetDetails.InstalledState  = '1' Then 'Uninstall'
    WHEN SMS_AppDeploymentAssetDetails.InstalledState  = '2' Then 'Install'
    WHEN SMS_AppDeploymentAssetDetails.InstalledState  = '3' Then 'Unknown'
    else 'Unknown'
    End as 'Installed State',
    CASE WHEN SMS_AppDeploymentAssetDetails.IsMachineAssignedToUser = '1' Then 'Yes'
    Else 'No'
    End as 'Device Assigned to User?',
    SMS_AppDeploymentAssetDetails.MachineName as 'Device Name',
    CASE WHEN CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)>0 THEN SUBSTRING
    (SMS_AppDeploymentAssetDetails.UserName,CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)+1,255)
    ELSE SMS_AppDeploymentAssetDetails.UserName END 'User Name'
    from fn_AppDeploymentAssetDetails(1033) AS SMS_AppDeploymentAssetDetails
    where SMS_AppDeploymentAssetDetails.AppStatusType = '5'
    ORDER BY 1
    Original query posted on http://systemcenteradmin.com/?p=67
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • Report to show all purchase orders for which invoice tolerence is greater than 3%?

    Hi Experts,
    Recently our company cofigured 3% tolerence limit for invoice.Now, I have got a requirement to create a report to show all the PO's for which the
    invoice tolerence limt is eq 3 %.Kindly anyone advise ,is there any table that stores the inovoice tolerence limit based on PO? How to achieve this requirement.
    Thanks in advance
    Thanks & Regards,
    Anusha.B

    Hi,
    I was wondering don't you have in your company MM consultant who suppose to give you the required tables name .
    Regards.

  • Report to show all activities (ended and not ended)

    Hi,
    I would like to do a report to show all activities (not ended and ended), but when I do the report from "Activity" the only information shown is no ended activities.
    Is possible to show all activities? How can I do it?
    Thank you and regards.

    Monica - depending on the Subject Area, including certain "look-up" or reference fields to other tables automatically implies a join-relationship between the 2 tables.
    Case-in-point, the activities subject area. Whenever you include fields from other objects like (Account Name, Campaign Name, Contact job title, etc.) "Answers" will automatically assume that you only want those activities where those field-values are populating, consequently filtering the report. It seems to occur any time you're trying to include data across tables in a one to one relationship.
    A better example, and likely a common headache for CRM report builders is an Opportunity report, wherein you're including data from the Primary Contact associated to the opportunity. By the same limitations, you would wind up with only those opportunities that have a Primary Contact associated, versus all opportunities with contact-data if it's populated.
    It is my understanding that the only workaround is to use Combined Analyses to create an union of the 2 reports, one with all opportunities and another with primary contacts. Use a pivot table and max-aggregation rule on the contact name to remove dupes.

  • Screen or Report that shows all Responsibilities for Org Unit

    How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
    SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
    FROM FND_PROFILE_OPTIONS FPO,
    FND_PROFILE_OPTION_VALUES FPOV,
    FND_RESPONSIBILITY_TL FR,
    HR_ALL_ORGANIZATION_UNITS HOU
    --HR_OPERATING_UNITS HOU
    WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
    PROFILE_OPTION_NAME = 'ORG_ID'
    AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
    AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
    AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
    the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

    Hello Kashif,
    Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
    The link that you provided really did not give any information that i was looking for.
    And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
    I have also tried to look in the System Administrator -> Profile -> System
    and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
    Thank you

  • Report to list all infotype record per employee

    Hi All
    is there a report that list all infotypes record per employee  ?
    thanks for helping
    Corinne

    Hi,
    It will not be feasible as all the IT has different fields.
    There is no standard report as Mr, Raghu mentioned.
    Ketul

  • Crystal Reports Cross-Tab Report not showing all available fields

    I am running CR2008 against MS SQL Express.  I have several tables with fields and data in them and can create standard reports to show all the data in all the fields.  However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
    I created a standard report with all the fields I needed in my cross-tab report and ran a preview.  Everything was there.  I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

    UPDATE:  I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
    I am creating the cross-tab through the Cross-Tab wizard.  Is there maybe a bug in that?  Is there a way to create it otherwise?

  • Report that shows managers and his/her Employees

    Hello All,
    Is there any standard report that shows the list of managers and his employees.
    Eg:
    Report should like below
    ManagerObjID EmployeeObjid
    When I enter a position of a manager it should give managers and employees belonging to that position.
    Thanks
    Venkat

    hi,
    u can that details from HRP1001 table.
    or u can use function module RH_STRUC_GET .

  • Report Region show all rows?

    Hi,
    I have a report region in which I want to show all rows. Setting the pagination scheme to No Pagination doesn't
    seem to do the trick. I have set Number of Rows and Maximum Row Count both to NULL. Nothing seems to work.
    Is there some trick to get all rows to be displayed?
    Thanks in advance!

    Hi,
    I have two report regions on different pages. On both I have set 'Number of Rows' and 'Maximum Row Count' to null. One report will return all the records in a query (~800), the other report will only return 500. I can't see any other differences in the reports that would cause this behaviour.
    I didn't really want to restrict my reports to a set number of rows, is this really the only option?
    Thanks,
    Rochelle.
    Edited by: Rochelle K on Nov 5, 2009 10:13 AM

  • Generate report to show all users and groups in Shared Services in EPM 11x

    Hi,
    Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
    ~Adeeba

    Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
    ~Adeeba

  • Report 2 show all receipts&disbursements in one screen 4 intercompany&Trade

    Hi all,
    i just have to see whether there is any standard report in SAP which pulls to shows all receipts and disbursements in one screen for intercompany and trade, if there is no standard report then they asked me to build a func spec to develop this kind of report.
    so i am trying to find out with the SAP community here, whether we have any standard report on this or not. if no, then how to proceed on this func spec.
    can anyone please put some light on this, i would be verymuch grateful.
    Thankyou
    Jay

    Refer the following:
    REPORT  ZTEST12.
    * Type declarations.....................
    TYPES pict_line(256) TYPE c.
    * data declarations......................
    DATA :init,
          container TYPE REF TO cl_gui_custom_container,
          editor    TYPE REF TO cl_gui_textedit,
          picture   TYPE REF TO cl_gui_picture,
          pict_tab TYPE TABLE OF pict_line,
          url(255) TYPE c.
    CALL SCREEN 100.
    * Dialog modules......................................
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'SCREEN100'.
      IF init is initial.
        init = 'X'.
        CREATE OBJECT:
               container  EXPORTING container_name = 'PICTURE_CONTAINER',
               picture    EXPORTING parent = container.
      ENDIF.
      IMPORT pict_tab = pict_tab FROM DATABASE abtree(pi) ID 'ENJOY'.
      CALL FUNCTION 'DP_CREATE_URL'
           EXPORTING
                type    = 'IMAGE'
                subtype = 'GIF'
           TABLES
                data    = pict_tab
           CHANGING
                url     = url.
      CALL METHOD picture->load_picture_from_url EXPORTING url = url.
      CALL METHOD picture->set_display_mode
           EXPORTING display_mode = picture->display_mode_fit_center.
    ENDMODULE.
    MODULE cancel INPUT.
      LEAVE TO SCREEN 0.
    ENDMODULE.

  • Report to show all calls raised and closed by month

    Hi all,
    could someone please help me? I have made a report to show the number of support calls raised in any given month as shown here...
    select count(distinct id) as "Number of calls", to_char(date_raised,'Mon')as "Month Raised", to_char(date_raised,'MM') date_raised1
    from requests
    where date_raised >='01-JAN-2007'
    group by to_char(date_raised,'MM' ),to_char(date_raised,'Mon' )
    what I am struggling with is a similar one to show the number of calls raised (requests.date_raised) and closed (requests.date_closed) within each given month. Is it even possible to do this in a single query?
    Thanks for any help you can give me.
    Jay

    Hi James
    How is life in Bristol?
    This is SQL, not APEX so you might have more luck in another forum but the following might be what you're after...
    select 'Requests' action, count(*) count, trunc(date_raised, 'MON') mmm
    from requests rm
    group by trunc(date_raised, 'MON')
    union all
    select 'Closures' action, count(*), trunc(date_closed, 'MON')
    from requests rm
    where date_closed is not null
    group by trunc(date_closed, 'MON')
    Phil

  • Want the Report to show all the records but side by side not a list of 15

    I created a report and the report shows a list 1 to 15, I want it to show all but next to each other how do I do that?

    I'm not sure I understand Your question but in Report Atrributes U have a "Layout and Pagination" field - there U can change Pagination Scheme. Maybe one of default will help U to receive what U want

Maybe you are looking for