Report to show breakdown of a particular WBS number
Hi SAP Experts,
Is there any report in SAP that I could see a breakdown of costs posted against a particular WBS number.
So in other words, I have a WBS number refering to a project and I want to run a report to show me what invoices have been posted to this WBS.
This report could be in SAP or BW.
Many thanks
Alex
Hi,
Please check S_ALR_87013532 to 87013541
Similar Messages
-
Need to create a report to show values for a particular date range
I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
These generic date columns are not present and cannot be added. I have to make use of Pres variables
What I have currently done is:
1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
Thanks.Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables. -
Std. Report that shows PSG linked to WBS (Pdt. hier. defined)
Hi Experts,
Is there any standard report that show, which Profit segment is derived and receives settled costs and revenues for a particular WBSE?
Our scenario:
(1) Billing WBS element is assigned to SO Line item, and billing plan is created and accordingly invoicing happens.
(2) Product hierarchy is defined in MM and linked to COPA for derivation of PSG.
Thanks in advance.Hi Aditya,
There are no standard reports in PS which will give you this information. You need to check with your CO counterparts to get it.
Most probably i think there won't be any standard report available to give you that detail. Try creating a custom report.
Use the table COBRA and COBRB with RPSCO or COSP/COEP table with PRPS to get the desired results.
Cheers
Sammar -
Any standard report to show WBS,settlement, asset no and asset cost/value
Hi All,
Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
Thank you.
Best Regards,
NiesDear,
der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
if ur get my ans reward with points
Regards
Rakesh -
Hi!
I am unable to get the result for my one of the item as checkbox. Other two are working properly .Please check and let me know wheres the problem please.
***INCLUDE ZSD_CONTRACT_LIST_T01_RENTAL1 .
TABLES: vbak, vbap, wbrk, zsdsched,vbkd, fplt, fpla, tvlvt.
TYPE-POOLS: slis.
data: BEGIN OF gt_report occurs 0,
vbeln LIKE vbak-vbeln, "Sales Document
posnr LIKE vbap-posnr, "Item
ernam LIKE vbak-ernam, "Created by
erdat LIKE vbak-erdat, "Created on
audat LIKE vbak-audat, "Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document type
vkorg LIKE vbak-vkorg, "Sales Org
vtweg LIKE vbak-vtweg, "Distribution Channel
spart LIKE vbak-spart, "Division
vkbur LIKE vbak-vkbur, "Sales Office
guebg LIKE vbak-guebg, "Valid from date
gueen LIKE vbak-gueen, "Valid to date kunnrt LIKE kna1-name1, "Sold-to Name
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
kunnr LIKE vbak-kunnr, "Sold-to party
kunnrt LIKE kna1-name1, "Sold-to Name
kvgr4 LIKE vbak-kvgr4, "Territory
matnr LIKE vbap-matnr, "Material
arktx LIKE vbap-arktx, "Material Short Text
charg LIKE vbap-charg, "Batch
matkl LIKE vbap-matkl, "Material Group
pstyv LIKE vbap-pstyv, "Item Category
zmeng LIKE vbap-zmeng, "Target Quantity
zieme LIKE vbap-zieme, "Target Unit
kdmat LIKE vbap-kdmat, "Customer Material Number
werks LIKE vbap-werks, "Plant
lgort LIKE vbap-lgort, "Storage Location
vstel LIKE vbap-vstel, "Shipping Point
route LIKE vbap-route, "Route
netpr LIKE vbap-netpr, "Net Price
kpein LIKE vbap-kpein, "Condition Price Unit
kmein LIKE vbap-kmein, "Condition Unit
shkzg LIKE vbap-shkzg, "Returns Item
oidrc LIKE vbap-oidrc, "DRC Code
kunwe LIKE vbap-oid_ship, "Ship-to
aufnr LIKE vbap-aufnr, "Order Number
vkaus LIKE vbap-vkaus, "Usage
kunwet LIKE kna1-name1, "Ship-to Name
zzwprofid LIKE vbap-zzwprofid, "Waste Profile ID
kunre LIKE wbrk-kunre, "Bill-to
kunret LIKE kna1-name1, "Bill-to Name
addl_schd LIKE icon-id, "Push Button For addl line
datab LIKE zsdsched-datab, "Valid-From Date
datbi LIKE zsdsched-datbi, "Valid To Date
zschdfreq LIKE zsdsched-zschdfreq, "Contract schedule frequency
frequency LIKE zsdsched-frequency, "Frequency
monday LIKE zsdsched-monday, "Mondays
tuesday LIKE zsdsched-tuesday, "Tuesdays
wednesday LIKE zsdsched-wednesday, "Wednesdays
thursday LIKE zsdsched-thursday, "Thursdays
friday LIKE zsdsched-friday, "Fridays
saturday LIKE zsdsched-saturday, "Saturdays
sunday LIKE zsdsched-sunday, "Sundays
dzieme LIKE zsdsched-dzieme, "Target quantity UoM
comments LIKE zsdsched-comments, "Comments
END OF gt_report.
data: Begin of gt_report1 occurs 0,
fksaf LIKE fplt-fksaf,
afdat LIKE fplt-afdat,
fakwr LIKE fplt-fakwr,
fkdat LIKE fplt-fkdat,
nfdat LIKE fplt-nfdat,
fpart LIKE fpla-fpart,
bedat LIKE fpla-bedat,
endat LIKE fpla-endat,
horiz LIKE fpla-horiz,
bezei LIKE tvlvt-bezei,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
ernam LIKE vbak-ernam,
guebg LIKE vbak-guebg,
gueen LIKE vbak-gueen,
auart LIKE vbak-auart,
kunnr LIKE vbak-kunnr,
kvgr4 LIKE vbak-kvgr4,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
vtweg LIKE vbak-vtweg,
vbtyp LIKE vbak-vbtyp,
name1 LIKE kna1-name1,
pstyv LIKE vbap-pstyv,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
oid_ship LIKE vbap-oid_ship,
kpein LIKE vbap-kpein,
kmein LIKE vbap-kmein,
netpr LIKE vbap-netpr,
kdmat LIKE vbap-kdmat,
posnr LIKE vbap-posnr,
matkl LIKE vbap-matkl,
aufnr LIKE vbap-aufnr,
vkaus LIKE vbap-vkaus,
route LIKE vbap-route,
kunre LIKE wbrk-kunre, "Bill-to
kunwe LIKE vbap-oid_ship, "Ship-to
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
End of gt_report1.
data: gs_report LIKE LINE OF gt_report,
gs_report1 LIKE LINE OF gt_report1,
gt_sched TYPE TABLE OF zsdsched,
gt_sched_tmp TYPE TABLE OF zsdsched,
gs_sched TYPE zsdsched,
gt_sel LIKE gt_report OCCURS 0,
gt_sel1 LIKE gt_report1 OCCURS 0,
gt_vbpa TYPE TABLE OF vbpa,
gs_vbpa TYPE vbpa,
gv_auart TYPE auart,
gv_counter TYPE i.
**-- ALV variables
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort TYPE slis_sortinfo_alv, "Sorting list
gt_sort TYPE slis_t_sortinfo_alv, "Sort
gs_layout TYPE slis_layout_alv, "List Layout
gs_variant TYPE disvariant, "Display Variant
gv_repid LIKE sy-repid,
gv_save(1) TYPE c,
ls_fieldcat1 TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat1 TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort1 TYPE slis_sortinfo_alv, "Sorting list
gt_sort1 TYPE slis_t_sortinfo_alv, "Sort
gs_layout1 TYPE slis_layout_alv, "List Layout
gs_variant1 TYPE disvariant, "Display Variant
gv_repid1 LIKE sy-repid,
gv_exit(1) TYPE c.
CONSTANTS: gc_a TYPE c VALUE 'A',
gc_g TYPE c VALUE 'G',
gc_re(2) TYPE c VALUE 'RE'.
Screen-control Variables
CONTROLS:
tctrl_sched TYPE TABLEVIEW USING SCREEN 1010. " Schedule lines.
*& Report ZSD_CONTRACT_LIST
*& Created on: January 21, 2007
*& Description: List of Contracts - ALV
REPORT zsd_contract_list_rental1.
INCLUDE zsd_contract_list_t01_rental1.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK m1 WITH FRAME TITLE text-t01.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t02.
SELECT-OPTIONS: s_vkorg FOR vbak-vkorg MEMORY ID vko,
s_vtweg FOR vbak-vtweg MEMORY ID vtw,
s_spart FOR vbak-spart MEMORY ID spa,
s_vkbur FOR vbak-vkbur MEMORY ID vkb.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_erdat FOR vbak-erdat,
s_ernam FOR vbak-ernam,
s_guebg FOR vbak-guebg,
s_gueen FOR vbak-gueen,
s_auart FOR gv_auart MEMORY ID vta
MATCHCODE OBJECT h_vakz,
s_fkarv FOR fplt-fkarv.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
s_kunnr FOR vbak-kunnr,
s_kunwe FOR vbap-oid_ship,
s_kunre FOR wbrk-kunre.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: s_werks FOR vbap-werks MEMORY ID wrk,
s_lgort FOR vbap-lgort MEMORY ID lag,
s_vstel FOR vbap-vstel MEMORY ID vst,
s_route for vbap-route,
s_matnr FOR vbap-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t04.
PARAMETERS: p_varia TYPE disvariant-variant MEMORY ID wrk,
p_all AS CHECKBOX DEFAULT 'X',
p_group AS CHECKBOX DEFAULT 'X',
p_rental AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK m1.
Start of Selection
START-OF-SELECTION.
PERFORM get_data.
Display ALV
END-OF-SELECTION.
IF gt_report[] IS INITIAL.
MESSAGE s419(brain).
ELSE.
PERFORM create_alv.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varia.
PERFORM f01_f4_variant CHANGING p_varia.
*& Form get_data
text
FORM get_data .
select the appropriate rental data.
IF p_rental IS NOT INITIAL AND ( ( p_all IS INITIAL ) AND ( p_group IS INITIAL ) ).
SELECT avbeln aerdat aernam aaudat avbtyp aauart a~vkorg
avtweg aspart avkbur aguebg agueen akunnr a~kvgr4
bpstyv bmatnr bwerks boid_ship bkpein bkmein
bnetpr bkdmat bposnr bmatkl baufnr bvkaus b~route
dbezei efkarv eafdat efakwr efkdat enfdat e~fksaf
ffpart fbedat fendat fhoriz flodat ftndat b~oid_ship AS kunwe
INTO CORRESPONDING FIELDS OF TABLE gt_sel1
FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INNER JOIN vbpa as c ON avbeln = cvbeln
INNER JOIN vbkd AS g ON avbeln = gvbeln
INNER JOIN fplt AS e ON gfplnr = efplnr
INNER JOIN fpla AS f ON efplnr = ffplnr
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr
AND e~fkarv IN s_fkarv
AND e~fksaf = 'A'
OR e~fksaf = 'B'.
sort gt_sel1.
*ENDIF.
IF NOT gt_sel1[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel1
WHERE vbeln = gt_sel1-vbeln
AND parvw = gc_re.
Loop through captured data for additional information
LOOP AT gt_sel1 INTO gs_report1.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
posnr = gs_report1-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report1-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report1-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunnr ).
gs_report1-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunwe ).
gs_report1-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
APPEND gs_report1 TO gt_report1.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report1.
*ENDIF.
ELSE.
IF ( ( p_all IS NOT INITIAL ) OR ( p_group IS NOT INITIAL ) ) AND p_rental IS INITIAL.
Select the appropriate contract data.
SELECT a~vbeln a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~oidrc b~oid_ship AS kunwe
b~zzwprofid c~datbi c~datab b~route
baufnr bvkaus d~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln AND
b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr.
SORT gt_sel.
ENDIF.
IF NOT gt_sel[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
endif.
Select the remaining records from the ZSDSCHED Table.
IF p_group IS NOT INITIAL.
SELECT * FROM zsdsched
INTO TABLE gt_sched
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND posnr = gt_sel-posnr.
SORT gt_sched.
ENDIF.
Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
IF NOT p_group IS INITIAL.
If we are grouping the lines add the icon button.
LOOP AT gt_sched INTO gs_sched WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
IF gv_counter > 0.
gs_report-addl_schd = '@1E@'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING gs_sched TO gs_report.
ADD 1 TO gv_counter.
ENDLOOP.
ELSE.
Otherwise get the rest of the schedule information
READ TABLE gt_sched INTO gs_sched
WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
datbi = gs_report-datbi
datab = gs_report-datab.
IF sy-subrc = 0.
MOVE-CORRESPONDING gs_sched TO gs_report.
ENDIF.
ENDIF.
APPEND gs_report TO gt_report.
ENDLOOP.
Remove any duplicates from the reporting table
DELETE ADJACENT DUPLICATES FROM gt_report.
If Show all records is initial, delete non-scheduled lines (ex. Sub-items)
IF p_all IS INITIAL.
DELETE gt_report WHERE datbi = 0
AND datab = 0.
ENDIF.
endif.
endif.
ENDFORM. " get_data
*& Form create_alv
text
FORM create_alv .
if ( ( p_all is not initial ) or ( p_group is not initial ) ) and p_rental is initial.
PERFORM initialize_fieldcat USING gt_fieldcat[].
PERFORM populate_layout CHANGING gs_layout
gs_variant.
PERFORM populate_sort USING gt_sort[].
PERFORM display_alv_report.
else.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
PERFORM initialize_fieldcat1 USING gt_fieldcat1[].
PERFORM populate_layout1 CHANGING gs_layout1
gs_variant1.
PERFORM populate_sort1 USING gt_sort1[].
PERFORM display_alv_report1.
*endif.
*endif.
ENDFORM. " create_alv
*& Form initialize_fieldcat
Get and enhance the field catalog data
-->L_FIELDCAT[] text
FORM initialize_fieldcat USING l_fieldcat TYPE slis_t_fieldcat_alv.
IF p_rental IS NOT INITIAL .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ENDIF.
ENDIF.
ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
FORM populate_layout CHANGING gs_layout TYPE slis_layout_alv
gs_variant TYPE disvariant.
gs_layout-colwidth_optimize = 'X'.
gs_layout-allow_switch_to_list = 'X'.
gs_layout-zebra = 'X'.
gs_variant-report = sy-repid.
ENDFORM. " populate_layout
*& Form populate_sort
text
-->l_SORT[] text
FORM populate_sort USING l_sort TYPE slis_t_sortinfo_alv.
ENDFORM. " populate_sort
*& Form display_alv_report
FORM display_alv_report .
gv_repid = sy-repid.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_report
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ELSE.
IF p_rental IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = GT_REPORT1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endif.
endif.
ENDFORM. " display_alv_report
*& Form initialize_fieldcat1
Get and enhance the field catalog data for rental fields
-->L_FIELDCAT[] text
*FORM initialize_fieldcat1 USING l_fieldcat1 TYPE slis_t_fieldcat_alv.
**if ***
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
**else.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
***endfi.
*ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
*FORM populate_layout1 CHANGING gs_layout1 TYPE slis_layout_alv
gs_variant1 TYPE disvariant.
gs_layout1-colwidth_optimize = 'X'.
gs_layout1-allow_switch_to_list = 'X'.
gs_layout1-zebra = 'X'.
gs_variant1-report = sy-repid.
*ENDFORM. " populate_layout
***& Form populate_sort
text
-->l_SORT[] text
*FORM populate_sort1 USING l_sort TYPE slis_t_sortinfo_alv.
*ENDFORM. " populate_sort
***& Form display_alv_report
*FORM display_alv_report1 .
gv_repid = sy-repid.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'gt_sel1'
is_layout = gs_layout1
it_fieldcat = gt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort1
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant1
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_sel1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*endif.
*ENDFORM. " display_alv_report
*& Form f01_f4_variant
Get the Layout variant for the user.
FORM f01_f4_variant CHANGING c_variant TYPE disvariant-variant.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
it_default_fieldcat =
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f01_f4_variant
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE gt_report INTO gs_report INDEX rs_selfield-tabindex.
CHECK sy-subrc = 0.
CASE rs_selfield-fieldname.
WHEN 'VBELN'.
Set parameter ID for transaction screen field
CHECK NOT gs_report-vbeln IS INITIAL.
SET PARAMETER ID 'KTN' FIELD gs_report-vbeln.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
WHEN 'ADDL_SCHD'.
CHECK NOT gs_report-addl_schd IS INITIAL.
REFRESH gt_sched_tmp.
LOOP AT gt_sched INTO gs_sched
WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
APPEND gs_sched TO gt_sched_tmp.
ENDLOOP.
CHECK sy-subrc = 0.
CALL SCREEN '1010' STARTING AT 5 5.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
*& Module STATUS_1010 OUTPUT
text
MODULE status_1010 OUTPUT.
SET PF-STATUS 'MAIN_1010'.
SET TITLEBAR '1010' WITH gs_report-vbeln gs_report-posnr.
ENDMODULE. " STATUS_1010 OUTPUT
*& Module USER_COMMAND_1010 INPUT
text
MODULE user_command_1010 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1010 INPUTHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
Report to show hours booked against a project
Hi all,
Does anyone know if there is there a report that will show the number of hours booked for labour against a project and that also shows a breakdown of the labour costs?
Many thanks.CJI3 - Line Item report can show you those values provided you include the fields Quantity, Personnel Number etc., in the layout.
Regards
Sreenivas -
Internal Order Report S_ALR_87012993 showing settled cost
HI ,
The issue here is related to IO report S_ALR_87012993 showing up settled cost against a particular Cost Element/GL account. However when we use the drill down function it says "No actual Line Item exist". I have checked the line item details for that particular GL account which does not have any posting to it with the said IO and moreover no FI Posting is done to that GL account during that relevant period. Hence the IO report is showing up variance .
I have checked the Settlement documents for that period for the said IO (Table AUAK ) through Transaction Code KOB8 , but none of these settlement indicates that particular Cost element/GL Account.
I have executed KOB1 which does not show up any line item with the said combination.
Any idea why the system /report showing up such settlement to that particular Cost Element/GL account which does not have any Actual Line Item posted with that particular IO.
Regards
JaydipThis is very very strange. Are you sure is not facing some profile problems to view information ?
KOB1 and S_ALR_87012993 have the same information: actual.
When you run settlement, it goes to inventory delivery account or to wip account depends on order status.
Sometimes people set a different account for settlement.
Check the balance account in transaction FS10N/FBL3N it must be the same because FI and CO are balanced for this account.
Regards -
Report to show reserved workitems
Hi,
We have a requirement to show the reserved workitems for a particular workcenter. I have tried using report SWI5 (as it has the option to provide workcenter) but it shows either list of completed items or to be completed. SO I am not sure which of the items are resrerved or not. Even SWI1 shows the reserved itesm but then we cannot show it for a particular workcenter.
Could you please help in this issue?
Thank You.hi,
you will get that from Table SWWORGTASK, when NO_SEL =''. and pass userid in :ORG_OBJ
logic is :
if for a WI id forward field 'X', means and no_sel = '' mean the WI is now with that person.
thanks
Kakoli
Edited by: kakoli debroy on Jul 24, 2009 2:13 PM -
RAR5.3 - SoD Report Not Showing Full Risk Description
Hello,
In a Sandbox environment, I'm playing around with/testing a new ruleset. The environment has our Production ruleset and I've added some risks to this ruleset via file upload in Configuration. The risks look great. Both the description and detailed description got imported correctly. The rules generated perfectly for these new risks I uploaded. Everything related to the risk, the way the risk is built, the rules, looks perfect. When I run Risk Analysis on test users that I know have the risk, they show on the report just as expected. However, the risk "description" is essentially missing. For example, in Management Summary View, here is what Risk B001* looks like:
B001: Basis Development & System Administration
Medium Basis TEST_USER(TEST_USER) USSPCJH40_E3
I've bolded the Risk Description.
However, here is what one of my new risks shows up like (F031, a risk we haven't put in production yet for various reasons):
F031: F031
Medium Finance TEST_USER(TEST_USER) USSPCJH40_E3
The Risk Description only says "F031." It still is hyperlinked so it still works, but I want to see the full Risk Description, obviously. When I look at the Risk in Rule Architect, both descriptions are there.
I then extracted the Rules via Rule Export and looked in the VIRSA_CC_RISKT table - the F031 description is there!
B001 (which looks fine) and F031 (which has the description missing) has entries in ALL of the same tables (unless there's a table that I'm not getting with the export?)
Can anyone help me out? Has anyone experienced a similiar issue? Why would all my newly imported risks not show a Risk Description when running Risk Analysis?
Thanks in advance!
Jes Behrens
Edited by: Jes Behrens on Feb 26, 2009 8:26 AMHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
Is there a table/report that shows a list of the original tcodes vs tcodes?
How to I find out the calling tcode of a transaction other than using SE93?
e.g
ABUM 's original tcode is AB01.
Is there a table/report that shows a list of the original tcodes vs tcodes?Table TCDCOUPLES gives a list of called tcodes for a particular tcode.
e.g
For parameter tcode 1KEF , called-tcodes are :
1KE1
1KEF
1KEG
OKKS
BUT this table does not show which called-tcode is the original tcode.
Using se93, I see that 1KEG is the original tcode.
Is there a table that will show only the parameter tcodes vs orginal tcodes? -
Project stock against a particular WBS element
How can i get the opening & closing stock value (not quantity) of project stock against a particular WBS element?
Regards,
IndranilHi,
Hiu2026
Im adding to above replies.
Prerequisites
You can only set the Closed status after Released status.
If u want to close the project/wbsu2026plz follow
Technically completed (TECO)
We can use this status for WBS elements that are completed from a technical point of view, but where you still expect costs to accrue.
Cj20nu2026Editu2026..Statusu2026.Complete technicallyu2026..set./undo(revoke)
Closed (CLSD)
We can use this status for a work breakdown structure or WBS element that has been completed from both a logistic and an accounting point of view.
Cj20nu2026.Editu2026..Statusu2026.Closeu2026..set./undo(revoke)
Both status can revoke.
Refer this link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
pherasath -
Report not showing terminated empoyees payroll results
Hi there,
I have coded a report that shows customized payroll data for a group of employees, delimited by two dates. The user found a problem when an employee is terminated on a given month but his termination is processed the next month (vacations, etc). Say the employee quits October 27, the payroll is run on November 10 and the report is run for November 1 - November 30: I wont see his payroll results because the employee does not belong to a particular organizational unit in november.
This is my main code:
START-OF-SELECTION.
GET pernr.
sapid = pernr-pernr.
* CREATE AND POPULATE PAYROLL OBJECT RRV100807
CREATE OBJECT pay.
CALL METHOD pay->read_result IMPORTING list = mylist.
* ELIMINATE OLD RECORDS RRV100807
LOOP AT mylist INTO wa_mylist WHERE SRTZA <> 'A'.
DELETE TABLE mylist FROM wa_mylist.
ENDLOOP.
* PROCESS PAYROLL FOR THE DESIRED ENTRIES RRV100807
CALL METHOD pay->write_result EXPORTING list = mylist.
GET payroll.
LOOP AT payroll-inter-wpbp INTO wa_wpbp WHERE orgeh IN PNPOBJID.
* PROCESS PERIOD DATA
itab_rt = payroll-inter-rt.
PERFORM get_wt_amounts.
EXIT.
ENDLOOP.
GET pernr LATE.
* IF THERE ARE PAYROLL RESULTS
IF wa_result-otsal <> 0
OR wa_result-regsal <> 0
OR wa_result-teller <> 0
OR wa_result-other <> 0.
* PROCESS EMPLOYEE
PERFORM get_data.
ENDIF.
Basically, the GET PERNR (get personnel record) is never executed because the employee does not belong to the org unit. Is there any way to gather employee records in one interval and payroll results in another? I assume they both use PNBEGDA and PNENDDA at this point.
What I want is to retrieve payroll information based on the screen dates (BEGDA and ENDDA) and the employee data based on the payroll periods that were run during those dates.Instead of using the standard selection screen field for choosing org units, you could create a custom selection screen field for the org unit. So the org unit would not affect the initial GET PERNR selection. Then in your code (after the GET PERNR) you could check for the org unit, with an additional condition to check the employee's previous org unit if he is terminated. There is also more than one way to get payroll results. We often use this in our reports:
FORM get_payroll_results.
CLEAR results_present.
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = pernr-pernr
TABLES
in_rgdir = rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc EQ 0.
Get cumulative monthly results
Store only active payroll results.
DELETE rgdir WHERE srtza NE 'A'. "Active
Delete all the payroll results not from the requested year
DELETE rgdir WHERE paydt0(4) NE p_mdate0(4). "Reporting Year
Delete any payroll results after the requested balance date
DELETE rgdir WHERE paydt > p_mdate.
Delete voided payroll data.
DELETE rgdir WHERE voidr NE space. "Voided
Sort so the first record is the last for the requested year.
SORT rgdir BY paydt DESCENDING fpend DESCENDING.
LOOP AT rgdir INTO ws_rgdir
WHERE paydt > beg_date.
seqnr = ws_rgdir-seqnr.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = 'RU'
employeenumber = pernr-pernr
sequencenumber = seqnr
CHANGING
payroll_result = result
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
LOOP AT result-inter-rt INTO wa_rt
WHERE lgart = wa_wagetype.
ADD ws_betrg TO ws_total.
ENDLOOP.
ENDLOOP.
ENDIF.
This allows you to specify by date, wagetype, pay period, etc. which payroll results you wnat to include. I hope this helps.
- April King -
ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin UsuwanthimIt used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?
-
Hi
I'm trying to come up with query report to show Inactive Item bought within a specific period and not sold within a specific period by whse and have stock
The report should show Item Number, Item Name ,Item cost,Retail Price [Based on a price list], Qty in Whse, Last Purchase Date, Last sale Date etc.
e.g item bought between 2011-2013 and have not been sold with the same date range or the last 12 months.
Regards
Brian Ndunda.Hi,
Try this query:
SELECT T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate] FROM OITM T0 left JOIN INV1 T1 ON T0.ItemCode = T1.ItemCode left JOIN OINV T2 ON T1.DocEntry = T2.DocEntry WHERE T1.[Quantity] is null and T0.[OnHand] >0 GROUP BY T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate]
Thanks & Regards,
Nagarajan -
Vendor report that shows all vendors missing tax id information
I would like to create a report that shows all vendors that are missing the tax id information. Please direct me on where to go.
thx
TraceDear,
Enter T-code MASS.
Select Object Type LFA1 and click on execute button.
Than click on Fields tab, Find your required field and click on execute button.
Than enter vendor list for which you want to find out the list.
And click on execute button.
Regards,
Mahesh Wagh.
Maybe you are looking for
-
Correct end date to a present or future date - Section80 and 80C deduction
Hi SDN, We are getting following exception for Section80 and Section80C deductions when click on Review button. Data valid only for past is not allowed, correct end date to a present or future date. Begin date should start from or higher. We have res
-
Problem in starting server instances in Cluster using nodeagent
Hi, I have a cluster which is having 2 servers and in that one server is under nodeagent1(on the same host) and another is on nodeagent2 which is on an another host. When I start the Cluster instances the server in the nodeagent1 is getting started.
-
Hi this message appears after 2 hours downloading Mavericks in App Store : an error occurred while extracting files from the package "mzps4135638417199433253.pkg" Same with "CMD + R" Help...
-
How to import sony video on i-pad
How to import sony-cam videos on i-pad's imovie
-
Erreur de tentative de synchronisation audio et midi garageband
Bonjour, Quand je fais de l'enregistrement avec Garageband (la plus récente version) avec un Mac Pro (OS Mavericks), j'ai le message suivant: erreur de tentative de synchronisation audio et midi dans GarageBand...J'utilise la carte de son FOCUSR