Report to show order blocked due to customer credit limit

Hi,
We can set customer credit limit and if the orders exceed the limit, the order will be blocked. I need to know is there any standard SAP report showing the orders blocked (due to credit limit) and unblocked?

Hi Paul Hawk,
There are no standard SAP report showing the orders blocked (due to credit limit) and unblocked. But there are reports which needs some customization.
Please see the reports
                    RVKRED06 credit check for blocked SD documents,
                    RVEXSLIB   List of all blocked partners / documents
Regards,
Lakshmi

Similar Messages

  • Credit management –impact in sales order if the order quantity is above customer credit limit..

    Hi Team,
    Can anyone help us to solve the issue in credit control process..our requirement is stock reservation should happen in sales order even if the sales order value is above the limit in customer master..
    Please share the configuration ..
    We tried many things but not working properly..
    Thanks,

    Hi Shiv,
    thanks for the help
    in this note , the point number 9  mentions that the result of rescheduling and manual stock reservation will be different if there is credit check in sales order.
    is there any way to solve it? it is because our product list is so high..i run V_V2 for 1000 items for 800 items reservation happened propelry and for 200 V_V2 didnt confirm for some orders for the same do we need to run manual ATP??
    Thanks to help us

  • Customer Credit Limit Not Showing in VKM4

    In some cases the customer credit limit is not being displayed in VKM4 for dynamic credit check holds. It seems to happen for certain customers but we can't tell why. The holds are valid, the limit is just not showing and we'd like to know if this is by design or a bug.
    We are running ECC 6.0
    Thanks

    Dear wradue      ,
    What difference did you find comparing the FD32 of customers with credit limit and without credit limit in VKM4?
    Thanks & Regard,
    Hegal K Charles

  • Customer Credit Limit on CRM Sales Order

    Dear All,
    Can the customer credit limit be displayed on CRM Sales order(Customer from ECC, we use simple credit check on SAP ECC)
    Regards,
    Ahmed

    Hi,
    The standard credit check in SAP CRM calls up the automatic credit check in SAP R/3. You must define an RFC destination, and specify this destination for the credit check.
    ·        To define RFC destinations in CRM Customizing, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Define RFC Destinations.
    ·        To specify destinations for the credit check, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Middleware Parameters ® Define Middleware Parameters. Then choose the activity Credit Check and enter an RFC destination for the parameter CRMCREDCHE.
    You can also carry out an initial data transfer for credit data.For transactions that are still open for which you are reactivating update of credit data, you can initially transfer the credit data for a reorganization of data in SAP R/3. To do this, start the initial data transfer for object CMDOC_NOTIFY using transaction R3AS.
    When setting up credit limit check, refer to SAP Note 568157, 570155 and 619500.
    With Regards
    Selvam T

  • Customer Credit Limit showing wrong in VKM3

    Hi All,
    Customer credit limit is showing wrong in VKM3 for all the customer.
    i.e : actuall T.Code:F34 is showing 740,000.00 which is correct. But in VKM3 it is 740.00(insted of 740K it is showing 740 only)
    The same thing happening for all the customer. How can I correct this. Pls advise.
    Thank You ,
    Pranitha.

    Thank You for you replay.
    But I found some other client, the credit limit same in FD32 and VKM3.they also ECC6.0.
    So what is the solution.

  • Block cash sales with credit limit blocking from creation of outbound

    Hello everyone,
    Can you please teach me how to block cash sales with credit limit blocking from creation of outbound delivery?  Currently, outbound delivery can not be created only for charge sales with credit limit block.  Problem is, we can not confirm the cash sales.  We have to delete first the outbound then unblock the S.O. before creating a new Outbound.
    Thanks in advance.
    Ridgy

    Cash sale transaction will not have credit limit block, as the transaction is based on receipt of immediate payment. But if you still want to try the same, configure a 'Z' transaction Type for cash sale (Copy of Cash Sale - Sales Order Type) and maintain Credit check field as 'D' and try the scenario.
    Ideally there should not be a Credir Check foe a Cash Sale Scenario.
    Regards,
    Rajesh Banka

  • Customer credit limit updation problem

    Hi,
    i created some customers, right now they don't have any credit limits, now by using fd32 Tcode i am trying to change the customer credit limit (creating new credit limit), but it is going to short-dump due to some time-out problem, can any one tell me for already existing users how to create credit limt.
    Thanks,
    Sreeram.

    Hi
    You need to enable the "audit trail" for this particular field
    Go to System Admin: Security:AuditTrail:Install
    Enable Audit Installation for AR
    Enabling the audit trail wil help you know the changes history.
    As far as my knowledge is concerned, there is no approval hierarchy on customer credit limit application, all you can do is to assign the responsibility to the authorized person.
    Regards
    Nouman Shaikh

  • Customer Credit limit and Exposure

    Dear Experts,
    I have an issue regading Customer Credit limit and Exposure in f.31.
    My customer have security deposit it is including in customer's credit exposure.
    My question is  this correct to show customer credit exposure along with spl gl indicator (H) security deposit?
    if not how to exclude it from balance.
    Plz its Urgent.
    Regards,
    Javeed

    Hi,
    Thanks for reply
    I have tried in FBKP and remove check box for credit limit
    but there is no immediate effect in (f.31) it is showing balance as previuos one
    but we post or book new security deposit with same its balance is not effected in (f.31)
    but we have already posted lot of entries for sec. deposits for customers.
    what i have to do for immediate balance effect for security deposit?
    Thanks,
    Javeed

  • Does Sap automatically updates customer credit limit from Financial Doc?

    Hi Everyone
    Does the Sap automatically updates the customer credit limit from the Financial document(Letter of credit) assigned to particular sales order.
    I actually want to know that how can i configure the control at delivery order if i assigned the financial document at sales order.Does the system automatically creates or updates the credit limit of that customer to control over delivery order.
    If yes then how and i only want to handle credit management in the case financial document(letter of credit).
    Regards;Vijay Kumar

    Hi,
    Hi,
    yes it does.
    Note some important points
    Inautomatic credit control field "No Check field", you can enter the number of a requirement with which you can control when credit checks are not carried out. You can deactivate some or all checks. This allows fine tuning on an individual basis for defining credit-relevant transactions and when credit checks do not need to be carried out.
    A check should be made to see whether the payment guarantee form has changed (letter of credit, payment card). If the payment guarantee form has not changed and if the old net value does not exceed the new net value, then no credit check is carried out.
    refer these book also
    McGraw.Hill.Implementing.SAP.ERP.Sales.and.Distribution
    TSSD40_3
    GTS100
    also check wiki also
    Thanks
    Chidambaram

  • Credit Managment: Sales Order last in update the Credit Limit

    Hello,
    I have a problem. When creating sales order with a few seconds of difference (from 1 to 5), the first sales order (that consumes all the credit limit) doesn´t reach to update the credit limit and for that reason the system permits to create the second one.
    I have an other case of two sales orders created in exactly the same time, so the system permited to create both of them.
    Do you think there is some solution for those cases?
    Thank you.
    Regards
    Jimena.-

    Hi Praveen,
    We use this functionality in that case for example you have two customer A and B.
    You want to maintain the credit limit 2000$ for both the customers.
    So we use this functionality, we assign the customer as credit account in another credit account.
    Now doesn't matter customer A buy the goods from you or customer B.
    System consider only 2000$ not 4000$.
    Hope it helps,
    Regards,
    MT

  • Customer Credit Limit from Oracle Financials to SAP

    Friends,
       SAP has  to receive the Customer credit limit data from Oracle Financials.  Can any one help me what idoc / bapi should i use for this inbound process.
    If the question is not clear ,  please let me know.
    Regards
    Raj

    Hi there,
    In WE20, check if there is Oracle system defined as Logical system in your company. If yes, then click on the logical system. It will display the details.Check in the inbound parameters what message types are assigned for that system.
    If Logical system is not defined for Oracle, then we need to define 1.
    I guess message type is CRESTA. Not sure.
    Regards,
    Sivanand

  • Making Customer Credit Limit (FD32) a sensitive field

    I am wondering if it is possible to mark customer credit limit (field KNKK-KLIMK) which you enter by using T-Code FD32 a sensitive field for dual control? If so, I request for detailed steps as I have been trying to do so but could not succeed. Please guide me.
    Thanks in advance.
    Moazzam

    Moazzam,
    you can have sensitive field only for Vendor and Customers Master Data (FK09 and FD09). If you want define FD32 fields for another user approbation you must create a User Exit or install a workflow.
    regards

  • Report to show Orders with FOB Destination?

    Is there a canned report available that shows Orders/Shipments by FOB (in 11.0.3)?
    We're getting hammered on Revenue Recognition and I need to be able to show orders that have anything other than FOB Origin/Factory - especially in the last week of the quarter (when it really counts).
    Any ideas/suggestions? Has anyone implemented a solution to keep from recognizing revenue until a shipment has been received by the customer?
    Thanks in advance,
    Cam

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • Customer credit limit - Report

    Hi
    I need to take a report as below
    Customer a/c      Terms of payment          Credit limit
    is there any standart report available in SAP. Please let me know
    regards
    Hari

    Hi,
    You can use F.31 Reprt.
    Similarly F.34 report also you can use.
    S_ALR_87009994,S_ALR_87012216,S_ALR_87009995,S_ALR_87012217 T.Codes.
    Among all these any one you can use.
    For all standard reports,Just goto Easy access sceen,enter the T.Code as SAP1.You will all list of standard reports.
    But the problem here is nothing contains the payment terms.You have to copy this code and Maintain the logic for this payment terms for your report.Take help from your ABAPer.Develop a Z report with that enhancement.
    Hope this helps you.
    Regards,
    Krishna.

  • Display Customer credit limit in aging report

    Hello,
    would it be possible to add a customers credit limit to the SAP standard report S_ALR_87012178 (Customer Open Item Analysis by Balance of Overdue Items)?
    Nicholas

    Hello,
    Credit limit is not available in this report.
    You need to copy this report to Z report and accommodate credit limit from the relevant tables.
    Regards,
    Ravi

Maybe you are looking for

  • DVD backup won't load

    hi i had an iMac G5-which has 'died'. before that happened, luckily i backed-up my photos (using iphoto 2.0). i'm trying to load them into a powerbook with iphoto 4 installed, but keep getting a message saying...'can't open using this version...you'v

  • Changes to a layer Ph cs4 js

    Hi, I need to make several changes to a layer, but none of them are working. Here what I have: doc = app.activeDocument; var myLayer = doc.activeLayer;   // I need to specify the layer or var myLayer = doc.layers.itemByName("Vector Smart Object");   

  • Translate a smartform to a non installed language

    Hello to everybody, I need to translate a smartform from english language to italian language and the se63 transaction gives back to me "Incorrect Code Page" error. My question is if i may translate this smartform omitting the package language instal

  • Mac Mini as Print Server

    When I upgraded all the household computers to Snow Leopard, we lost the ability to communicate with our old LaserWriter 600/4 because Snow Leopard doesn't support AppleTalk. Who knew? A solution appeared when my father replaced his Mac Mini with a n

  • Apps not working- YouTube and maps

    My YouTube app disappeared after the ios6 update. And the public transportation directions on the maps is great also. For those of us in the city who relied on that. What's the best place to go?