Report to view the list of materilas for which 105 has not been done

Hello Everyone
I want to to view the report which can show me the list of pending GR (105 to take the material into unrestricted use) that has to be done aganist the 103.
Thanks in Advance
Sachin

Hi,
Use T.Code:MB51 and try with 103 movements type and get the report .
Also try in MMBE, M.C9 T.code
Hope helpful to you.
Regards,
Biju K

Similar Messages

How to find out the GR Numbers for which IR has not been done

Hi Sap Gurus,
Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
Thanks N Regards,
Siddhartha

Hi Siddarth,
Solution :
        1) Go to SE16 - Table Name : EKBE (PO History)
        2) Field - BUDAT (Posting Date)
        3) Transaction event Type:
                         - 1 (Only GR's )
                         - 2 (Both GR and IR)
        4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
In addition to MB5S, you can try this also...

Report for list of POs for with Invoice has not been posted

Hi All
Can anybody tell me the report for list of PO' for which GR has already been done but Invoice is not posted
Thnks
Ranjith

Hi
Try Report ME2M,
With input selection parameter "WE101".
Hope this helps.
Harish

To find Pricing Record for Materials for which Pricing has not been upload.

Hi All,
Is there a way in SAP SD to find the Materials without Pricing in VK13.
Please suggest your valuable inputs or I need to for a Z Report.
Thanks,
Parag.

Hi Parag,
The only other way is write a z-report which picks up materials based on a combination of MARA and MVKE( since you mentioned sales org and dist channel validation)..the selection screen should have sales org, dist channel as parameters and probably condition type also..use as many selection parameters as possible on the screen.
and for the materials, sales org, dist channel, condition type with application as V, you should pick up values from A004..
but is that the only key you're using ..if not then consider using AXXX table for different key combinations..but this is still clumsy/time taking..I would suggest leave it to the ABAPer for the performance part.
However,I've one question.. you said pricing has not been uploaded? what does it mean? not yet created through VK11? so how can you find them even in A004? am little lost..?
Regards
Raghu.
Edited by: Rags on Sep 14, 2011 9:36 AM

Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

How do I view the list of wireless routers my ipad has successfully authenticated with, and if possible when the last connection to each was made?

How do I view the list of wireless routers my ipad has successfully authenticated with, and if possible when the last connection to each was made?

The information is of course stored on the device, but currently thee is no way to get to it. It is unknown whether iOS stores the date info for each connection.
As to whether a program can be written, its likely it can, but unlikely it can be done by anyone other than Apple, as by design, 3rd party Apps are not allowed to core system functions like that so its unlikely any App could list your connection history.
As has been said to remove a single connection from the iPad you need to be in range of it, tap the circle on the right side of the router name, and then tap on Forget this network.

Can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

I'm on a PC and have uninstalled an re-installed Itunes.That sorts out Windows but knocks out the network adaptors which means i can't get onto the web! So its either no iTunes or no web it seems. I've fully updated Windows andam now scratching my head. Any ideas are welcome. Thank you

SCCM Client Policy instance "The body for this policy has not been downloaded."?

Hi,
With PolicySpy I got SCCM Client Policy instance with an red and white symbol "The body for this policy has not been downloaded." what does that mean?
/SaiTech

Hi,
Is there something not working? What is the core issue?
-It is a long story, I will take the short version. I have had several supportcase at Microsoft, I think in two yeas time. We have done RAP as a Service, and no big issue. I have reinstalled the MP just some Days ago.
I started with slow App-V 4 user centric deployment (hours). No I have an case at Microsoft support about Enable Win32_QuickFixEngineering class in the Client Setting hardware Inventory dont get enable at client side.
If I do policy reset I think it take long time 15-30 minuters to all actions show up again.
So I try to understand MP and policy, I have an feeling that something is not right but what?
/SaiTech

Goods receipt for purchase assignments has not been posted

Hi all;
In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted"
-the purchas order is assined to items delivery correctelly!
-in our case, we haven't a stock.
-after goods issue in vl02n we have tow goods mvt (101 for goods receipt) and (601 for goods issue) for the same quantity.
so can you tell me how to solve this problem
thx

ok sir ;
No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
-first with me21n i created global purchas order
-the sales will be picked from this purchas .
-delivery is assigned automatically to this purchas order with user exit.
-with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

Goods receipt for purchase assignments has not been posted. Mes. no. O1573

Dear expert,
I got a proplem with Intercompany STO as detail below:
Goods receipt for purchase assignments has not been posted.
Message no. O1573
Diagnosis
Certain fields needed for posting Goods Receipt have not been entered.
System Response
The goods receipt for Purchase Assignment was not posted.
Procedure
Check the error log and make the required entry.
process Step by steps:
1- create PO (intercompany PO) --> save
2- create SO to sell to endcustomer (at receiving company)
3- create DO
4- assign the previewous PO to DO (exchange function)
5- PGI ---> problem as above
Please, kindly help

Dear all,
In this case, if I enter itemcategory "U" into PO I can post GR and GI at the same time I do PGI. but you know if I use "U" which mean I can't enter the net price as normal because this is a "stock transfer".
Is there any ideal for this?
Please, help me

XSLT Mapping: Namespace for prefix 'ns0' has not been declared

Hello, I am working on a synchronous SOAP call and having some trouble with the response message. The web service has its own namespace and I am trying to convert this to my custom data type in PI. PI wants the message to be in format of having ns0 prefix and namespace like we have defined (http://foo for example).
I have an XSLT mapping (see below) which works fine with my test response payload (pulled from SXMB_MONI source) on this online XSLT test site:
http://www.freeformatter.com/xsl-transformer.html
However when I import this archive to PI and test with operation mapping it always says "Namespace for prefix 'ns0' has not been declared."
This is very confusing because when I test it online, I see both prefix and namespace declaration perfectly. Is there a way to see the results in the PI test tool? After this XSLT java error it doesn't give me the output even in Trace Level All mode.
Please advise on this issue or if you know an easier way (such as altering my datatype/message type to match the inbound SOAP message). I tried working with the 3rd party WSDL but the response message types show a different root level node than what PI is receiving so I gave up to make my own matching datatype. I just have to solve this last inbound namespace issue and should be finished.
FYI I have refreshed all PI caches and activated all objects.
Thanks for your ideas!
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ns0="http://foo"
<xsl:output method="xml" indent="yes" omit-xml-declaration="yes"/>
<xsl:template match="@* | node()">
    <xsl:copy>
      <xsl:apply-templates select="@* | node()"/>
    </xsl:copy>
</xsl:template>
<xsl:template match="/*">
    <xsl:element name="ns0:{local-name()}">
      <xsl:apply-templates select="@* | node()" />
    </xsl:element>
</xsl:template>
<xsl:template match="/">
    <xsl:element name="{local-name()}">
      <xsl:apply-templates select="@* | node()" />
    </xsl:element>
</xsl:template>
</xsl:stylesheet>

Some additional info, here is an example payload which goes through the XSLT mapping perfectly, but in PI I get the error about missing ns0 declaration.
XML input:
<bar xmlns='http://irrelevantnamespace'
xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'
xmlns:xsd='http://www.w3.org/2001/XMLSchema'
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
<foo/>
</bar>
XSLT mapped output using test tool and XSL above:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:bar xmlns:ns0="http://foo">
   <foo />
</ns0:bar>

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Account for bank transfer has not been defined

Hi,
I am doing a Bank Transfer in my SDK development and I get following error:
"Account for bank transfer has not been defined "
I use _SYS00000000002 (Cash at Bank - Checking (HO, USA, GA )) from the US demo database for testing and it doesn't work.
My code is below, even when this only for consuling.
Thank you,
Rune
oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
                    oPayments.CardCode = vmp_CardCode_string;
                    oPayments.DocDate = DateTime.Now;
                    oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
                    oPayments.TaxDate = DateTime.Now;
                    SAPbobsCOM.Recordset oRecordset_BankAccount = null;
                    oRecordset_BankAccount = ((SAPbobsCOM.Recordset)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)));
                    oRecordset_BankAccount.DoQuery("SELECT * FROM [dbo].[@PAY_TYPE] WHERE [U_PayMethod] = '01'");
                    oRecordset_BankAccount.MoveFirst();
                    if (oRecordset_BankAccount.EoF == true) // No Records
                    else
                        vmp_BankAccount_string = Convert.ToString(oRecordset_BankAccount.Fields.Item("U_BankAccount").Value);
                    oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343"; //"1010140-001";
                    oPayments.TransferDate = DateTime.Now;
                    oPayments.TransferReference = vmp_CardCode_string;
                    oPayments.TransferSum = vmp_Amount_double;
                    vc_Message_Result_Int32 = oPayments.Add();
Edited by: Rune Brattas on Jun 18, 2009 5:18 PM

Hi,
I request you to post this thread in SDK forum,so that you may get quick response.
And kindly close this thread after posting in the appropriate forum.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).

Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
== URL of affected sites ==
http://

HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.

Report to view the list of materilas for which 105 has not been done

Similar Messages

Maybe you are looking for