Report - Two Pages of Data Per Record

Okay, I've seen several questions about adding a new page to the main body of a report in here, but I haven't been able to make anything work.
I have a report w/ customer data. Each customer's data has a page 1 and a page 2. I need to be able to print customer A's page 1 and 2, followed by customer B's page 1 and 2, then customer C's page 1 and 2, and so on.
In the paper layout, the first page takes up the entire main body area, so even if I inserted a page break at the bottom, there's no room left to put the content for the second page, w/o spilling past to the next area below it, and anytime I try to add anything below that, I get an error saying "Object 'M_1' is not fully enclosed by its enclosing object 'Body'".
How do I do this?

Okay, I must not have explained this correctly. I can put a page break in; however, because of the nature of the report and the necessary format, the content of the first page in the layout takes up the entire main body, therefore, there is no room to put anything below where the page break would have to be, because the page break would literally be at the very bottom of the body in the paper layout. I need a completely new page in the layout to format my second page.
This isn't a simple report of data, the first page of each customer's information is a form letter, and takes up the entire page, and the second page of each customer's information is similar to that. (I'm formatting it on my own and not using the "Form" report type in the report wizard).
I know there is a way to do this, but I can't seem to figure it out.

Similar Messages

Restricting the item data for two pages if data is more then cutoff

Hi Expers,
I have one requirement that i need to restrict item data upto two pages .If more data is vailabe even pritning after two pages then data should cutoff(means we don't want to print that extra data in the next pages ).Could you please explain how can we achive this in main window ?Can we achive this even using secondary window also?Thanks for your help in advance.
Thanks and Regards,
Venkat

Dear experts,
For restricting the data up to two pages in the mainwondow ,I have written the condition SFSY-PAGE LE 2.But still i am getting more than two pages means entire data.Can any one explains why this condition is failed(My main window is in the first page itself).
Many thanks for your help,
venkat

Duplicate report title for every date where records are found in date range

Hi,
I have a developed a report that lists multiple entries by date range with a page break separating each date. What I would like to include now is a report title which only appears once for each date, and separated by page break.
Example:
(Business Unit)
(Address)
(Report Title)
(Date)
Entry 1
Entry 2
Entry 3
Entry 4
Entry 5
Entry 6
Entry 7
(Business Unit)
(Address)
(Report Title)
(Date)Entry 1

Hi Camelbak2113,
According to your description, it seems that you want to eliminate the duplicate report title for every date. If in this scenario, I suggest that we can try to add a group grouped on date range, and then add a child group grouped on report title. Then add
page breaks between each instance of date range group.
If I have something misunderstood, please provide us more information about the report. Such as provide us some screenshots about the report with sample data. So that we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report with two pages

hi all
I am designing a report which has two pages , i completed first page, i need to insert second page
how to design report with two pages
Thanks in advance
Krish

Hi,
Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
Following is some information from the Crystal Reports Online Help menu:
New Page After:
- When the End of Section check box is selected, the program inserts a page break after the section.
- The Page Header and Page Footer appear on each page.
- Use New Page After in the Group footer section to print each group on a separate page.
May be, if this is not what you are looking for then please elaborate on the report design/data

Report, Make a linkage group for two pages each page has a Repeating frame

I Have two pages. And each page have a repeating frame inside a main frame.
And two pages have a relational data. So, I should to make a linkage group for this two page.
In my case,
PAGE 1.
*M_1 Main frame start
R_1 Repeating Frame start
Personal Data Part 1.
R_1 Repeating Frame end
*M_1 Main Frame end
PAGE 2.
*M_2
R_2
Personal Data Part 2.
R_2
*M_2
If there are 3 peoples information, Repeating frame will display continuously.
In my case,
page 1
page 1
page 1
page 2
page 2
page 2
But I want to do the following.
Page 1. -- 1st person's data
Page 2.
Page 1. -- 2nd person's
Page 2.
Page 1. -- 3rd.
Page 2. so on...
I need your help.
please let me know how to solve this problem.

Hi,
i have a question related to this.
i am making a report in a similar pattern:
*M_1 Main frame start
R_1 Repeating Frame start
Data Part 1.
R_2 Repeating Frame start
Data Part 2.
R_2 Repeating Frame end
R_1 Repeating Frame end
*M_1 Main Frame end
Now the problem is that whenever there are multiple occurences of data in R_2, the data Part 1 is also printed that many times, whereas i want to show this just once.
Is there any way to do this?
Regards,
Swati

Record printing on two pages

When there is not enough space at the end of a page and record is long, part of the data is printed on next page. This seems to be default behaviour. Is there a way to print the whole of last record on next page instead of partially printing on two pages?
Thanks

Yes, set the Page Protect to Yes.
-Marilyn

How do I print front and back with two pages per sheet? (OSX Lion)

I can't find a simple solution to my situation...
I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2.
I want print two PDF pages onto one printed sheet, and I want to print front and back. When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for. But when I tell it to print odd only or even only, it changes the print selection. Here's what happens...
Let's say I have a PDF document that is 20 pages long. When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2. When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
So that I'm being clear...
This [ ] is a printed page. The numbers inside the brackets represent the page numbers in the PDF document...
What I want to print is this...
FRONT   || BACK
[1,2]    || [3,4]
[5,6]    || [7,8]
[9,10]   || [11,12]
[13,14] || [15,16]
[17,18] || [19,20]
What would end up printing is this...
FRONT   || BACK
[1,3]    || [2,4]
[5,7]    || [6,8]
[9,11]   || [10,12]
[13,15] || [14,16]
[17,19] || [18,20]
Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
~Deepak

Report Header split across two pages in preview

Hi there,
I've got a full page of A4 text as my report header which works fine in the Design view. However, in preview it splits across two pages leaving about a quarter at the bottom of the first page blank. The text should easily fit on one side of A4 - any ideas why it's being split?
Thanks

Hi
Ideally if you have inserted a cross tab on the report header, then it might split into more than one page.
Please ensure that you have not put a cross tab on the report header. You can also switch to Landscape and check if it fits the report header in one page.
Hope it helps.
Regards
Sourashree Ghosh

How can I get the date and time and display it on the report main page?

Gurus,
How can I get the date and time and display it on the report main page?
Thanks!

Hello,
You can create a Formula Colum returning a date :
function CF_1Formula return Date is
begin
RETURN(SYSDATE);
end;
Put a Field in the Layout having this formula column as source .
Regards

How can add two page report in Crystal Report

Hi experts
I want to make a two page report. for example First page is invoice and second page contain some legel information that Fix.
Regards
Gorge

Hi Ance,
yes you can do it , Suppose you want to call the second opage at the end of page footer or at the end of report (every page in crystal have section ), make the formula on that section aftyer which u want to call the second page . in formula mention rhe condition like if page no =1 then call second page or call page break that depends on u .
Hope u got some idea ,moreever pls let me know u want the page break after end of report or page fotter .
Rgds,
Premraj

Export excel setting Page header once per report not working

Hi All,
      I am having a java web application which creates the predefined template reports in pdf or xls or rpt format. I have a requirement where in case of XLS format, the page header should be displayed ONCE PER REPORT. I have Crystal Reports XI release 2 and Java 1.5.
    I am setting from java code
     formatType = IReportFormatOptions.CeReportFormat.EXCEL;
     reportFormat.setFormat(formatType);
     IExcelFormat formatExcel = (IExcelFormat)reportFormat.getFormatInterface();
     formatExcel.setExportPageHeaderFooter(IExcelFormat.CeReportExportHeaderFooterOption.ONCE);
I have installed a patch named Excel Export patch which basically sets some registry entries
Set HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal
Reports\Export\Excel\PageAreaExportType to 0 for default behavior, 1 to display no page area, 2 to display page area once per report, and 3 to show the page area once per page.
Set HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal
Reports\Export\Excel\ColumnWidthBaseArea to 0 for default behavior, 4 for column width based on detail
section.
I have set PageAreaExportType to 2 and ColumnWidthBaseArea to 0 and 4.
Still i see the page headers repeating on every page. Could you please help me in resolving the issue?
Thanks in advance.

Currently in our new version of java application, we are not using DHTML viewer. Predefined report templates are published on crystal server and from Java application, we send the report parameters to the crystal and also specify the format type.
Exporting excel from the crystal template is working fine with the page headers repeating only once (have set the page header show once per report option before exporting it to excel). But the same is not happening from the Java application. i have attached the required files to the message that i posted. If you have the access you can take a loot at them.

Inserting a two page TIFF file into Report Builder 10.1.2.2.0

Hello all!
I am trying to create a report which uses a pre-printed form. I went to the paper layout view and inserted my TIFF file, however only the first page is used. This is a two page file. How can I use both pages in my report?
Thanks!

Can you open any other rdf?
We had quite a few crashes with the Report Builder on Windows 7, especially when using graphs in rdfs. Setting the compatibility of the shortcut to "Windows Vista" solved most of our problems.
Regards
Markus

Printing two pages per sheet with equal margins

My first post here. I did a search but didn't see an answer to my question.
How can I get equal margins when printing two pages per sheet?
I print aviation approach plates 2 pages per sheet and fold the sheet of paper in half and carry with me in a knee board. I had no problem doing this until last week after my hard drive was changed. The steps I normally take are:
click file
print
print range: all
copies: 1
page scaling: multiple pages per sheet
pages per sheet: 2
page order: horizontal (for the first pass through the printer and horizontal reversed for the second pass)
print to file: box checked
the preview now shows a winder margin on the left side of the page than the right.
I can't figure out any way to even the margins. Anyone have any ideas?
John W.
Colorado

What printer model? What program are you printing from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Two pages are printing with second one blank though there is no data

Hi All,
Got One Ticket as :- While Printing the form Two pages are Printing Automatically Though the data Consists of only one page it is getting printed the second page as empty.
Please let me know What Could be the reason My Guess is if we reduce the font size we can able to avoid the second page printing
Any Suggestions
Regards,
Kumar
Edited by: kumar kumar on Jun 10, 2010 2:34 PM

Hi,
There is a chance of an empty line in any of your text node,
this is after your variable in any of the text node there is a chance of assiging a paragraph format
with out any variable in that line.
you can check this by selecting the pencil icon in the text nodes and go to change editor.
Thanks,
Phani.

Oracle matrix report split in two pages

hi,
my matrix report is spliting in two pages. All columns are ok but the total of the columns shows *** due to length problem so i increase the columns width and the report goes in two pages now.
Is there any way to show the totals in without decresing the width eg..
123456789111
can be shows like
1234567
89111
i already using smallest fonts
thanks

helloooooooooooooooooo

Report - Two Pages of Data Per Record

Similar Messages

Maybe you are looking for